Filename: tfs 256.doc Version 2.0 Vectron International 11.05.2012 Filter specification TFS 256 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: Input: Output: 23 0 200 200 °C dBm Ω Ω Characteristics Remark: The nominal frequency fN is fixed at 256,0 MHz. The insertion loss ae is defined as loss value determined at fN. All specified data are met within the operating temperature range. Data typ. value Insertion Loss (reference level) ae 1,35 Nominal Frequency fN - Centre Frequency fC 256,0 Bandwidth 3 max. 3,5 256,0 dB MHz MHz BW dB Absolute Attenuation dB tolerance / limit 5,85 MHz - aabs fN - 85,333 MHz 53 dB min. 48 dB fN + 85,333 MHz 48 dB min. 45 dB fN ± 170,666 MHz 51 dB min. 48 dB fN + 256,000 MHz 51 dB Input power level Operating Temperature Range OTR Storage Temperature Range Temperature Coefficient of Frequency - TCf * 48 dB 10 dBm - 25 °C ... + 85 °C - 32 min. max. - 45 °C ... + 95 °C ppm/K *) ∆f(Hz) = TCf(ppm/K) x (T-T0) x fTo(MHz). Generated: Checked / Approved: Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 256.doc Version 2.0 Vectron International 11.05.2012 Filter specification TFS 256 2/5 0 0 -10 -0.5 -20 -1 -30 -1.5 -40 magnitude in dB magnitude in dB Filter characteristic -50 -60 -2 -2.5 -3.5 -80 -4 -90 -4.5 0 100 200 300 frequency in MHz 400 -5 252 500 0 -3 -70 -100 2 253 254 255 256 frequency in MHz 257 258 259 -2 Construction and pin connection (All dimensions in mm) 7 1 2 3 4 5 6 7 8 256 ● T48 1 SQ 3,81 +0,2/-0,1 5 Ground Input Ground Ground Ground Output Ground Ground 3 7 5 Date code: T U V ... Year + week 2005 2006 2007 0,1 12 0% 0,6 % d 3 1,78 2,54 1 1,2 Max. Date code 1,78 200 Ω Test circuit L1 2 6 L2 SAW 1, 3, 4, 5, 7, 8 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 256.doc Version 2.0 Vectron International 11.05.2012 Filter specification TFS 256 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: twice max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; This filter is RoHS compliant (2002/95/EG, 2005/618/EG) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: 3000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 12,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 5,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 8,00 ± 0,1 D1(min) : 1,50 Ao : 4,30 ± 0,1 Bo : 4,30 ± 0,1 Ct : 9,2 ± 0,1 P1 t PIN Marker Po P2 W G Ct Bo F G E Do Ko Date Code Typ D1 Ao W 2 Reel (all dimensions in mm) A : 330 W1 : 12,4 +2/-0 W2(max) : 18,4 N(min) : 50 C : 13,0 +0,5/-0,2 C A N W 1 The minimum bending radius is 45 mm. Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 256.doc Version 2.0 Vectron International 11.05.2012 Filter specification TFS 256 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 256.doc Vectron International Version 2.0 Filter specification 11.05.2012 TFS 256 5/5 History Version Reason of Changes Name Date 1.0 - Generation of development specification Strehl 25.08.2005 1.1 - Add typical values, add filter characteristic, - change absolute attenuation, change stability characteristics, - generation of filter specification Channaa 28.11.2005 2.0 - Changed pull off direction from reel Schönbein 11.05.2012 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.