Filename: tfs 1000.doc Version 2.1 Vectron International 12.06.2014 Filter specification TFS 1000 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: Input: Output: 23 0 °C dBm 50 Ω 50 Ω Characteristics Remark: The nominal frequency fN is fixed at 1000 MHz. The insertion loss ae is defined as loss value determined at fN. All specified data are met within the operating temperature range. Data typ. value Insertion loss ae fN Nominal frequency Centre frequency fC Bandwidth 3 Absolute attenuation 125 250 375 500 625 750 875 dB max. 1000 5.0 1000 MHz - 35.29 MHz - 80 70 61 56 52 49 46 dB dB dB dB dB dB dB dB MHz BW dB @ @ @ @ @ @ @ 2.3 tolerance / limit aabs MHz MHz MHz MHz MHz MHz MHz Operating temperature range OTR Storage temperature range Temperature coefficient of frequency -46 50 50 50 50 40 40 40 dB dB dB dB dB dB dB -40 °C ... + 90 °C TCf * min. min. min. min. min. min. min. -45 °C ... + 95 °C ppm/K - *) ∆f(Hz) = TCf(ppm/K) x (T-T 0 ) x fTo(MHz). B B Generated: Checked / Approved: Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1000.doc Version 2.1 Vectron International 12.06.2014 Filter specification TFS 1000 2/5 0 0 -10 -1 -20 -2 magnitude in dB magnitude in dB Filter characteristic -30 -40 -3 -4 -50 -5 -60 -6 -70 0 200 400 600 frequency in MHz 800 1000 -7 980 1200 984 988 992 996 1000 1004 frequency in MHz 1008 1012 1016 1020 Construction and pin connection (All dimensions in mm) 6 7 5 A00 ● E24 8 2 1 4 Ground Input Ground Ground Ground Output Ground Ground Date code: E F G ... Year + week 2014 2015 2016 3 1 ,0 +/-0,15 Date code 0,6 +/-0,15 7 3 ,0 +/-0,15 3 0,6 +/-0,15 1 ° 60 1 2 3 4 5 6 7 8 5 0,6 +/-0,15 3 ,0 +/-0,15 50 Ω Test circuit L1 2 6 L2 SAW 1, 3, 4, 5, 7, 8 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1000.doc Version 2.1 Vectron International 12.06.2014 Filter specification TFS 1000 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0.35 mm or 5 g respectively, 1 octave per min, 10 cycles per plane, 3 planes; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): -55 °C to 125°C / 15 min. each / 100 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: three times max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; This filter is RoHS compliant (2011/65/EU) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: 3000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 8,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 3,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 4,00 ± 0,1 D1(min) : 1,50 Ao : 3,25 ± 0,1 Bo : 3,25 ± 0,1 Ct : 5,3 ± 0,1 P1 t PIN Marker Po P2 W G Ct Bo F G E Do Ko Date Code Typ D1 Ao W 2 Reel (all dimensions in mm) A : 330 or 180 W1 : 8,4 +1,5/-0 W2(max) : 14,4 N(min) : 60 C : 13,0 ± 0,2 C A N W 1 The minimum bending radius is 45 mm. Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1000.doc Version 2.1 Vectron International 12.06.2014 Filter specification TFS 1000 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1000.doc Vectron International Version 2.1 Filter specification 12.06.2014 TFS 1000 5/5 History Version Reason of Changes Name Date 1.0 Generation of development specification S. Channaa 06.10.2009 1.1 Change insertion loss and attenuation S. Channaa 21.10.2009 1.2 Add typical values and filter characteristic Change stability, generation of filter specification S. Channaa 11.03.2010 2.0 Changed pull off direction from reel Schönbein 29.05.2012 2.1 Filter characteristics plots corrected Schönbein 12.06.2014 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.