SP2525
Low ESR Cap. & Low Power High-speed CMOS LDO
DESCRIPTION
The SP2525 series are highly precise, low noise,
positive voltage LDO regulators manufactured using
CMOS processes. The series achieves high ripple
rejection and low dropout and consists of a standard
voltage source, an error correction, current limiter and a
phase compensation circuit plus a driver transistor. The
series is also compatible with low ESR ceramic
capacitors which give added output stability.
This stability can be maintained even during load
fluctuations due to the excellent transient response of
the series. The current limiter's feedback circuit also
operates as a short protect for the output current limiter
and the output pin.
The SP2525 family is compatible with low ESR
capacitors. The current limiter's feedback circuit also
operates as a short protect for the output current limiter.
The SOT-23-3L / SOT-353 packages are available for
portable electronic equipment.
APPLICATIONS
z Battery Power Equipment
z Cellular Phone
z Digital Cameras
z Computer Disk Drivers
z Portable games
z
Communication tools
FEATURES
Highly Accurate ± 2%
Maximum operation voltage 7V.
Dropout Voltage 200mV @ 150mA (3.3V type)
High Ripple Rejection 45dB (10 KHz)
Low Power Consumption 25μA (TYP.)
Minimum Output Current 300mA
Standby Current less than 0.1μA
Internal protector current limiter and short
Small packages SOT-23-3L / SOT-353 , and other
required
PIN CONFIGURATION
SOT-23-3L
SOT-353
PART MARKING
SOT-23-3L
SOT-353
2006/08/11 Ver.1
Page 1
SP2525
Low ESR Cap. & Low Power High-speed CMOS LDO
APPLCATION CIRCUIT
PIN DESCRIPTION
SOT-23-3L
SOT-353
Symbol
Description
1
2
VSS
Ground
2
5
VOUT
Voltage
Output
3
1
VIN
Voltage
Input
ORDERING INFORMATION ( X : Voltage Code ; Y : Year Code ; W: Week Code )
Part Number
Package
Part Marking
SP2525XS23RG
SOT-23-3L
5XYW
SP2525XS35RG
SOT-353
5XYW
※ Week Code : A ~ Z ( 1 ~ 26 ) ; a ~ z ( 27 ~ 52 )
※ SP2525XS23RG : Tape Reel ; Pb – Free
※ SP2525XS35RG : Tape Reel ; Pb – Free
VOLTAGE CODE INFORMATION
Voltage Code (X)
D
K
N
S
2006/08/11 Ver.1
Output Voltage (V)
1.8
2.5
2.8
3.3
Page 2
SP2525
Low ESR Cap. & Low Power High-speed CMOS LDO
BLOCK DIAGRAM
TEST CIRCUIT
Circuit 1 :
Circuit 2 :
ABSOULTE MAXIMUM RATINGS
(TA=25℃ Unless otherwise specified)
Parameter
Input Voltage
Output Current
Symbol
VIN
IOUT
Output Voltage
Thermal Resistance
ӨJA
Power Dissipation
PD
Operation Junction Temperature Range
Storage Temperature Range
2006/08/11 Ver.1
VOUT
SOT-23-3L
SOT-353
SOT-23-3L
SOT-353
TJ
TSTG
Value
7
500
Unit
VIN
IOUT
VSS-0.3 ~ VIN+0.3
120
105
1250
950
-40 ~ +85
-55 ~ +125
VOUT
℃/W
mW
TJ
TSTG
Page 3
SP2525
Low ESR Cap. & Low Power High-speed CMOS LDO
ELECTRICAL CHARACTERISTICS
(TA=25℃ , Unless otherwise specified)
Parameter
Output Voltage
Maximum Output Current
Load Regulation
Dropout Voltage
Supply Current
Line Regulations
Input Voltage
Output Voltage
Temperature
Characteristics
Symbol
VOUT(E) 1
IOUT
Conditions
VIN=VOUT+1.0V,IOUT= 30mA
VIN≥VOUT+1.0 V
VIN=VOUT+1.0 V
△VOUT 2
1.0 mA ≤IOUT ≤ 300 mA
Vdif 1
IOUT=30mA
Vdif 2
IOUT=150mA
IDD
VIN=5V
VOUT /
VOUT+0.5 V ≤VIN≤7V
( △VIN – VOUT ) IOUT=30 mA
VIN
△VOUT /
VIN=VOUT+1.0V,IOUT=10mA
(△Topr – VOUT) -40℃≦Topr≦85℃
Ripple-Rejection
|PSRR|
Ripple-Rejection
|PSRR|
Short Current
Ishort
(NOTE 1) VOUT(T) = Specified Output Voltage
VIN=VOUT+1.0V，f=1 kHz
Vrip=0.5Vrms, IOUT=60 mA
VIN=VOUT+1.0V，f=10 kHz
Vrip=0.5Vrms, IOUT=60 mA
VIN=VOUT+1.0V, VOUT=VSS
Min.
Typ.
Max.
x 0.98
VOUT(T)
x 1.02
Unit
V
mA
VOUT(T)
X1.0%
V
E1
E2
25
40
mV
mV
uA
0.025
0.1
%/V
7
V
300
15
1.8
±100
ppm/℃
55
dB
45
dB
50
mA
(NOTE 2) VOUT(E) = Effective Output Voltage (le. The output voltage when "VOUT(T)+1.0V" is provided at the VIN
pin while maintaining a certain IOUT value.)
(NOTE 3) Vdif = {VIN 1 (NOTE5) + VOUT 1 (NOTE4)}
(NOTE 4) VOUT1 = A voltage equal to 98% of the Output Voltage whenever an amply stabilized IOUT {VOUT(T) +
1.0V} is input.
(NOTE 5) VIN 1 = The Input Voltage when VOUT 1 appears as Input Voltage is gradually decreased.
(NOTE 6) Unless otherwise stated, VIN = VOUT(T)+1.0V
DROPOUT VOLTAGE LIST ( E1 / E2 )
VOUT
(TA=25℃)
1.8
2.5
2.8
3.3
2006/08/11 Ver.1
E1 (IOUT=30mA)
TYP
MAX
180
210
60
100
60
100
50
90
E2( IOUT=150mA)
TYP
MAX
350
400
240
290
220
270
200
250
Page 4
SP2525
Low ESR Cap. & Low Power High-speed CMOS LDO
PERFORMANCE CHARACTERISTICS ( Voltage Code = Z ; 2.5V )
2006/08/11 Ver.1
Page 5
SP2525
Low ESR Cap. & Low Power High-speed CMOS LDO
PERFORMANCE CHARACTERISTICS ( Voltage Code = Z ; 2.5V )
2006/08/11 Ver.1
Page 6
SP2525
Low ESR Cap. & Low Power High-speed CMOS LDO
PERFORMANCE CHARACTERISTICS ( Voltage Code = Z ; 2.5V )
2006/08/11 Ver.1
Page 7
SP2525
Low ESR Cap. & Low Power High-speed CMOS LDO
SOT-23-3L PACKAGE OUTLINE
2006/08/11 Ver.1
Page 8
SP2525
Low ESR Cap. & Low Power High-speed CMOS LDO
SOT-353 PACKAGE OUTLINE
2006/08/11 Ver.1
Page 9
SP2525
Low ESR Cap. & Low Power High-speed CMOS LDO
Information provided is alleged to be exact and consistent. SYNC Power Corporation presumes no responsibility for the
penalties of use of such information or for any violation of patents or other rights of third parties which may result from its use.
No license is granted by allegation or otherwise under any patent or patent rights of SYNC Power Corporation. Conditions
mentioned in this publication are subject to change without notice. This publication surpasses and replaces all information
previously supplied. SYNC Power Corporation products are not authorized for use as critical components in life support
devices or systems without express written approval of SYNC Power Corporation.
©The SYNC Power logo is a registered trademark of SYNC Power Corporation
©2004 SYNC Power Corporation – Printed in Taiwan – All Rights Reserved
SYNC Power Corporation
9F-5, No.3-2, Park Street
NanKang District (NKSP), Taipei, Taiwan 115
Phone: 886-2-2655-8178
Fax: 886-2-2655-8468
©http://www.syncpower.com
2006/08/11 Ver.1
Page 10