product details OT 12/230-240/10 UNV1 Product description: EAN/ Product: Quantity: OT 12/230-240/10 UNV1 4050300609232 Unpacked (UNV) contains 1 Piece (PCE) Applications Dimmable Yes 1) IP code IP20 Cable cross-section, output side H03VV-F 2 x 0.75 mm² | NYM 3 x 1.5 mm² Cable cross-section, input side H03VV-F 2 x 0.75 mm² | NYM 3 x 1.5 mm² Short-circuit protection automatic reversible Overload protection automatic reversible Overtemperature protection automatic reversible General Description Design / version ECG standard SEG no. 5280323 Standards acc. to IEC 61347-2-13 | acc. to IEC 62384 | acc. to EN 55015 | acc. to IEC 610003-2 | acc. to IEC 61000-3-3 | acc. to IEC 61547 Sstl-Number 4030666 Technical - Electrical Data Mains frequency 50-60 Hz TH full width at half maximum 95 µs Device power loss ... 3.5 W 2) Lamp wattage 12 W 3) Power factor c > 0.9 Nominal voltage 230-240 V Output voltage 10.5 ± 0.5 V Max. no. of ECGs on circuit breaker 10A 90 Max. no. of ECGs on circuit breaker 16A 135 Technical - Geometries Width 50 mm Height 35 mm Length 109 mm Max. cable length - system in meters 4m Technical - Temperatures Max. casing temp. in case of fault 90 °C Max. operating temp. at the Tc point 70 °C Ambient temperature range -20 ... +50 °C Storage temperature -40 ... 85 °C Relative humidity 5 ... 85 % 4) Packaging units EAN Packaging type and content Dimensions in h x w x l Gross weight Volume 4050300609232 Unpacked contains 1 Piece 52,000 mm x 34,000 mm x 108,000 mm 98,250 g (0,000 g) 0,191 Cubic dec. product details OT 12/230-240/10 UNV1 Packaging units EAN Packaging type and content Dimensions in h x w x l Gross weight Volume 4050300609249 Shipping carton box contains 20 Piece 229,000 mm x 94,000 mm x 270,000 mm 2.083,000 g (0,000 g) 5,812 Cubic dec. 1) with OPTOTRONIC dimmers 2) maximum 3) at 100% luminous flux 4) max. 56 d/y at 85% product details OT 12/230-240/10 UNV1 Geometry Wiring diagram Instruction sheet Please consult the instruction sheet for further important information on dimming characteristic, wire stripping and wiring limitations in system installations. The instruction sheet is available upon request.