PC47EI50-Z - Products of TDK

F E R R I T E S
December 2014
Mn-Zn
Ferrite Core for Switching Power Supplies
E series
EI
EE, EF
EER
ETD
(2/52)
F E R R I T E S
REMINDERS FOR USING THESE PRODUCTS
Please be sure to read this manual thoroughly before using the products.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment,
home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment,
industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality
require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person
or property.
When using the products for specific purposes, please first make confirmations in areas such as safety, reliability, and quality.
Please understand that we are not in a position to be held responsible for any damage or the like caused by any use exceeding the range
or conditions of this specification sheet or by any use in the specific applications.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When using this product in general-purpose standard applications, you are kindly requested to take into consideration securing protection
circuit/equipment or providing backup circuits, etc to ensure higher safety.
20141203 / ferrite_mz_sw_e_en.fm
(3/52)
F E R R I T E S
Ferrite Cores for Switching Power Supplies
Product compatible with RoHS directive
Halogen-free
Overview of the E Series
FEATURES
Standard form for use in most commonly used transformers.
Shape conforms to JIS and IEC standards.
EF, ETD cores have shapes that are commonly used in Europe.
A wide range of sizes is available from 8mm to 60mm.
APPLICATION
Switched-mode power supply (SMPS), electronics, power adapters, transformers and coils for chargers
PART NUMBER CONSTRUCTION
PC47
EI12.5
Material
Size of E core
PC47
PC95
-
Z
AL-value
(Z: without air gap)
EI core
EI12.5
EI16
EI35
EI40
EE, EF core
EE8
EE10/11
EE20/20/5 EF20
EE35/28B EE35
EE57/47
EE60
EER core
EER25.5
EER25.5
EER40
EER42
ETD core
ETD19
ETD24
EI19
EI50
EI22
EI60
EI22/19/6
EI25
EI28
EF12.6
EE22
EE40
EE13
EE25/19
EE41/33C
EE16
EF25
EE42/42/15
SEE16
EE25.4
EE42/42/20
EF16
EE19
EE30
EE30/30/7
EE47/39 EE50
EE19/16
EF32
EE55/55/21
EER28
EER28
EER42/42/20 EER49
EER28L
EER28L
EER35
EER40
ETD29
ETD39
ETD44
ETD49
ETD34
EI30
EER35
EI33/29/13
RANGE OF USE AND STORAGE TEMPERATURE
Temperature range
Operating
temperature
(°C)
–30 to +105
Storage
temperature
(°C)
–30 to +85
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(4/52)
F E R R I T E S
Mn-Zn EI Cores
A
E
A
H
D
H
SHAPES AND DIMENSIONS
F
C
C
I
B
PC47
EI12.5
Material
Size of E core
Part No.
JIS
-
Z
AL-value
(Z: without air gap)
Dimensions
(mm)
A
B
C
D
E min.
F
H
I
12.4±0.3
7.4±0.1
4.85±0.15
2.4±0.1
8.8
5.1±0.1
1.6
1.5±0.1
16.0±0.3
12.2±0.2
4.8±0.2
4.0±0.2
11.6
10.2±0.2
2.05
2.0±0.2
PC47EI19-Z
20.0±0.3
13.55±0.25
5.0±0.2
4.55±0.15
14.3
11.15±0.15
2.75
2.3±0.1
PC47EI22-Z
22.0±0.3
14.55±0.25
5.75±0.25
5.75±0.25
13.0
10.55±0.25
4.5
4.5±0.2
22.0±0.4
14.7±0.2
5.75±0.25
5.75±0.25
15.75
10.7±0.2
3.0
4.0±0.2
25.3±0.5
15.55±0.25
6.75±0.25
6.5±0.3
19.0
12.35±0.25
3.0
2.7±0.2
28.0 –0.5
+0.7
16.75±0.25
10.6±0.2(E core)
10.7±0.3(I core)
7.2±0.3
18.4
12.25±0.25
4.5
3.5±0.3
+0.7
21.25±0.25
10.7±0.3
10.7±0.3
19.7
16.25±0.25
5.0
5.5±0.2
PC47EI12.5-Z
PC47EI16-Z
PC47EI22/19/6-Z
JIS
FEI 12.5
JIS
FEI 16
JIS
FEI 22
PC47EI25-Z
PC47EI28-Z
PC47EI30-Z
JIS
FEI 28
JIS
FEI 30
30.0 –0.4
Effective parameter
Core
factor
Part No.
C1(mm–1)
Effective
cross-sectional
area
Ae(mm2)
Electrical characteristics
Effective
magnetic path
length
ℓe(mm)
Effective
core volume
Weigh
AL-value
Core loss
Ve(mm3)
(g)
(nH/N2)
1kHz
0.5mA
100Ts
Without air gap
(W) max.
100kHz
200mT
PC47EI12.5-Z
1.48
14.4
21.3
308
1.9
1200±25%
PC47EI16-Z
1.75
19.8
34.6
685
3.3
1100±25%
PC47EI19-Z
1.65
24.0
39.6
950
5.1
1400±25%
PC47EI22-Z
0.936
42.0
39.3
1650
9.8
2400±25%
PC47EI22/19/6-Z
1.13
37.0
41.8
1550
8.5
2000±25%
PC47EI25-Z
1.15
41.0
47.0
1930
9.8
2140±25%
PC47EI28-Z
0.56
86.0
48.2
4150
22
4300±25%
PC47EI30-Z
0.522
111
58.0
6440
34
4690±25%
With air gap
63±7%
100±10%
80±7%
160±10%
80±7%
160±10%
125±7%
250±10%
125±7%
250±10%
125±7%
250±10%
200±5%
400±7%
200±5%
400±7%
100°C
0.1
0.3
0.4
0.6
0.6
0.8
1.6
2.2
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(5/52)
F E R R I T E S
Mn-Zn EI Cores
A
E
A
H
D
H
SHAPES AND DIMENSIONS
F
C
C
I
B
PC47
EI40
Material
Size of E core
Part No.
JIS
PC47EI33/29/13-Z
PC47EI35-Z
PC47EI40-Z
PC47EI50-Z
PC47EI60-Z
JIS
FEI 35
JIS
FEI 40
JIS
FEI 50
JIS
FEI 60
-
Z
AL-value
(Z: without air gap)
Dimensions
(mm)
A
B
C
D
E min.
F
H
I
+0.8
33.0 –0.5
23.75±0.25
12.7±0.3
9.7±0.3
23.4
19.25±0.25
4.45
5.0±0.3
35.0±0.5
24.35±0.15
10.0±0.3
10.0±0.3
24.5
18.25±0.15
5.0
4.6±0.3
40.0±0.5
27.25±0.25
11.65±0.35
11.65±0.35
27.2
20.25±0.25
6.2
7.5±0.3
50.0 –0.7
+1.2
33.35±0.35
14.6±0.4
14.6±0.4
33.5
24.75±0.25
7.7
9.0±0.3
+1.4
35.85±0.35
15.6±0.4
15.6±0.4
43.6
27.85±0.35
7.7
8.5±0.3
60.0 –0.8
Effective parameter
Core
factor
Part No.
C1(mm–1)
Effective
cross-sectional
area
Ae(mm2)
Electrical characteristics
Effective
magnetic path
length
ℓe(mm)
Effective
core volume
Weigh
AL-value
Core loss
Ve(mm3)
(g)
(nH/N2)
1kHz
0.5mA
100Ts
Without air gap
(W) max.
100kHz
200mT
PC47EI33/29/13-Z
0.567
119
67.5
8030
41
4400±25%
PC47EI35-Z
0.664
101
67.1
6780
36
3800±25%
PC47EI40-Z
0.520
148
77.0
11400
60
4860±25%
PC47EI50-Z
0.409
230
94.0
21620
115
6110±25%
PC47EI60-Z
0.441
247
109
26900
139
5670±25%
With air gap
200±5%
400±7%
200±5%
400±7%
200±5%
400±7%
250±5%
500±7%
250±5%
500±7%
100°C
2.7
2.3
3.7
8.6
9.2
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(6/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EI12.5-Z
12.4±0.3
8.8 –0
12.4±0.3
1.6
2.4±0.1
1.6
SHAPES AND DIMENSIONS
2.3
5.1±0.1
4.85±0.15
7.4±0.1
4.85±0.15
1.5±0.1
Dimensions in mm
Based on JIS FEI 12.5.
Effective parameter
Core
factor
C1
(mm–1)
1.48
Effective
magnetic path
length
ℓe
(mm)
21.3
Coil:ø0.2
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
14.4
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
308
11.6
10.8
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
17.3
1.9
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
1200±25% 2120 min.
(W)max.
100kHz
200mT
100°C
0.10
2UEW 100Ts
○ Calculated output power (forward converter mode): 11.5W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
Temperature rise of hot spot ΔT (°C)
10 4
10 3
10 3
AL-value(nH/N2)
NI limit (AT)
10 2
40%
20%
Center pole gap
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=3313×AL–0.9379
NI40%=3432.3×AL–0.9341
10 2
10 4
10 3
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=34.065×lg –0.6814
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.2 2UEW 100Ts
• Frequency:1kHz
• Current level:0.5mA
• Ambient temperature: 25°C
10
0
0
0.2
0.4
0.6
0.8
Total loss Pm (W)
1
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(7/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EI16-Z
10.2±0.2
4.8±0.2
12.2±0.2
16.0±0.3
11.6–0
2.05
2.0
16.0±0.3
4.0±0.2
2.05
SHAPES AND DIMENSIONS
4.8±0.2
2.0±0.2
Dimensions in mm
Based on JIS FEI 16.
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
1.75
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
34.6
Coil:ø0.23
19.8
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
685
19.2
17.5
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
40.3
3.3
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
1100±25% 1750 min.
(W)max.
100kHz
200mT
100°C
0.29
2UEW 100Ts
○ Calculated output power (forward converter mode): 33W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
Temperature rise of hot spot ΔT (°C)
10 4
10 3
10 3
AL-value(nH/N2)
NI limit (AT)
10 2
40%
20%
Center pole gap
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=6108.3×AL–0.9852
NI40%=5191×AL–0.9328
10 3
10 2
10 4
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=59.731×lg –0.5958
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.23 2UEW 100Ts
• Frequency:1kHz
• Current level: 0.5mA
• Ambient temperature: 25°C
10
0
0
0.5
1
1.5
Total loss Pm (W)
2
2.5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(8/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EI19-Z
2.3
11.15±0.15
5.0±0.2
13.55±0.25
20.0±0.3
14.3 –0
20.0±0.3
2.75
4.55±0.15
2.75
SHAPES AND DIMENSIONS
5.0±0.2
2.3±0.1
Dimensions in mm
Based on JIS FEI 12.5.
Effective parameter
Core
factor
C1
(mm–1)
1.65
Effective
magnetic path
length
ℓe
(mm)
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
39.6
Coil:ø0.23
24.0
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
950
22.8
21.1
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
55.5
5.1
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
1400±25% 1830 min.
(W)max.
100kHz
200mT
100°C
0.39
2UEW 100Ts
○ Calculated output power (forward converter mode): 45W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
10 3
Temperature rise vs. Total loss
(Typ.)
100
Temperature rise of hot spot ΔT (°C)
10 4
10 3
AL-value(nH/N2)
NI limit (AT)
10 2
40%
20%
Center pole gap
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=7250.4×AL–0.9823
NI40%=6549.8×AL–0.9485
10 3
10 2
10 4
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=70.518×lg –0.5966
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.23 2UEW 100Ts
• Frequency:1kHz
• Current level: 0.5mA
• Ambient temperature: 25°C
10
0
0
0.5
1
1.5
Total loss Pm (W)
2
2.5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(9/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EI22-Z
22.0±0.3
13.0 –0
22.0±0.3
4.5
5.75±0.25
4.5
SHAPES AND DIMENSIONS
4.0 10.55±0.25
5.75±0.25
14.55±0.25
5.75±0.25
4.5±0.2
Dimensions in mm
Based on JIS FEI 12.5.
Effective parameter
Core
factor
C1
(mm–1)
0.936
Electrical characteristics
Effective
magnetic path
length
ℓe
(mm)
Effective
cross-sectional
area
Ae
(mm2)
39.3
Coil:ø0.23
42.0
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
1650
33.1
30.3
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
38.2
9.8
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
2400±25% 3360 min.
(W)max.
100kHz
200mT
100°C
0.56
2UEW 100Ts
○ Calculated output power (forward converter mode): 49W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
10 3
Temperature rise vs. Total loss
(Typ.)
100
Temperature rise of hot spot ΔT (°C)
10 4
10 3
40%
AL-value(nH/N2)
NI limit (AT)
10 2
20%
Center pole gap
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=9020.7×AL–0.9553
NI40%=8571.4×AL–0.9365
10 3
10 2
10 4
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=89.257×lg –0.6431
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.23 2UEW 100Ts
• Frequency:1kHz
• Current level:0.5mA
• Ambient temperature: 25°C
10
0
0
0.5
1
1.5
Total loss Pm (W)
2
2.5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(10/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EI22/19/6-Z
4.0
10.7±0.2
5.75±0.25
14.7±0.2
22.0±0.4
15.75 –0
22.0±0.4
3.0
5.75±0.25
3.0
SHAPES AND DIMENSIONS
5.75±0.25
4.0±0.2
Dimensions in mm
Based on JIS FEI 22.
Effective parameter
Core
factor
Electrical characteristics
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
1.13
Effective
cross-sectional
area
Ae
(mm2)
41.8
Coil:ø0.23
37.0
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
1550
33.1
30.3
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
54.8
8.5
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
2000±25% 2780 min.
(W)max.
100kHz
200mT
100°C
0.59
2UEW 100Ts
○ Calculated output power (forward converter mode): 59W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
Temperature rise of hot spot ΔT (°C)
10 4
10 3
10 3
AL-value(nH/N2)
10 2
NI limit (AT)
40%
20%
Center pole gap
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=10759×AL–0.9827
NI40%=9912.4×AL–0.9566
10 2
10 4
10 3
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=90.86×lg –0.6309
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.23 2UEW 100Ts
• Frequency:1kHz
• Current level:0.5mA
• Ambient temperature: 25°C
10
0
0
0.5
1
1.5
Total loss Pm (W)
2
2.5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(11/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EI25-Z
3.2
12.35±0.25
6.75±0.25
15.55±0.25
25.3±0.5
19.0 –0
25.3±0.5
3.0
6.5±0.3
3.0
SHAPES AND DIMENSIONS
6.75±0.25
2.7±0.2
Dimensions in mm
Based on JIS FEI 12.5.
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
1.15
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
47.0
Coil:ø0.35
41.0
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
1930
43.9
40.3
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
77.2
9.8
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
2140±25% 2950 min.
(W)max.
100kHz
200mT
100°C
0.82
2UEW 100Ts
○ Calculated output power (forward converter mode): 82W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
Temperature rise of hot spot ΔT (°C)
10 4
10 3
10 3
10 2
AL-value(nH/N2)
NI limit (AT)
40%
20%
Center pole gap
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=24894×AL–1.1034
NI40%=21762×AL–1.0626
10 2
10 4
10 3
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=106.11×lg –0.6907
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level: 0.5mA
• Ambient temperature: 25°C
10
0
0
0.5
1
1.5
Total loss Pm (W)
2
2.5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(12/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EI28-Z
28.0±0.5
+0.7
28.0 –0.5
18.4 –0
4.5
7.2±0.3
4.5
SHAPES AND DIMENSIONS
4.5
12.25±0.25
16.75±0.25
10.6±0.2
10.7±0.3
3.5±0.3
Dimensions in mm
Based on JIS FEI 28.
Effective parameter
Core
factor
C1
(mm–1)
0.560
Effective
magnetic path
length
ℓe
(mm)
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
48.2
Coil:ø0.35
86.0
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
4150
76.3
71.8
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
69.8
22
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
4300±25% 6060 min.
(W)max.
100kHz
200mT
100°C
1.58
2UEW 100Ts
○ Calculated output power (forward converter mode): 145W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
10 4
Temperature rise of hot spot ΔT (°C)
10 3
10 3
NI limit (AT)
40%
20%
AL-value(nH/N2)
Center pole gap
10 2
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=27491×AL–0.9977
NI40%=24357×AL–0.9669
10 3
10 2
10 4
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=176.71×lg –0.7009
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level: 0.5mA
• Ambient temperature:25°C
10
0
0
0.5
1
1.5
Total loss Pm (W)
2
2.5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(13/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EI30-Z
30.0±0.4
+0.7
30.0 –0.4
19.7 –0
5.0
10.7±0.3
5.0
SHAPES AND DIMENSIONS
5.0 16.25±0.25
10.7±0.3
21.25±0.25
10.7±0.3
5.5±0.2
Dimensions in mm
Based on JIS FEI 30.
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
0.523
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
58.0
Coil:ø0.35
111
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
6440
114
108
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
75.6
34
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
4690±25% 6490 min.
(W)max.
100kHz
200mT
100°C
2.17
2UEW 100Ts
○ Calculated output power (forward converter mode): 214W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
10 4
10 3
20%
Center pole gap
40%
NI limit (AT)
AL-value(nH/N2)
10 2
Temperature rise of hot spot ΔT (°C)
10 3
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=46192×AL–1.0403
NI40%=35218×AL–0.9805
10 2
10 4
10 3
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=244.58×lg –0.6745
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level: 0.5mA
• Ambient temperature: 25°C
10
0
0
1
2
3
Total loss Pm (W)
4
5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity:45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(14/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EI33/29/13-Z
4.5
19.25±0.25
12.7±0.3
23.75±0.25
33.0±0.5
+0.8
33.0 –0.5
23.4 –0
4.45
9.7±0.3
4.45
SHAPES AND DIMENSIONS
12.7±0.3
5.0±0.3
Dimensions in mm
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
0.567
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
67.5
Coil:ø0.35
119
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
8030
123
117
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
138.6
41
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
4400±25% 5980 min.
(W)max.
100kHz
200mT
100°C
2.67
2UEW 100Ts
○ Calculated output power (forward converter mode): 288W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
10 4
10 3
20%
Center pole gap
40%
NI limit (AT)
AL-value(nH/N2)
10 2
Temperature rise of hot spot ΔT (°C)
10 3
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=55584×AL–1.0586
NI40%=43957×AL–1.0072
10 2
10 4
10 3
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=259.07×lg –0.647
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level:0.5mA
• Ambient temperature: 25°C
10
0
0
1
2
3
Total loss Pm (W)
4
5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(15/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EI35-Z
35.0±0.5
24.5 –0
35.0±0.5
5.0
10.0±0.3
5.0
SHAPES AND DIMENSIONS
6.1 18.25±0.15
10.0±0.3
24.35±0.15
10.0±0.3
4.6±0.3
Dimensions in mm
Based on JIS FEI 35.
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
0.664
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
67.1
Coil:ø0.35
101
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
6780
100
94.1
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
131.6
36
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
3800±25% 5110 min.
(W)max.
100kHz
200mT
100°C
2.35
2UEW 100Ts
○ Calculated output power (forward converter mode): 266W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
10 4
Temperature rise of hot spot ΔT (°C)
10 3
10 3
40%
Center pole gap
AL-value(nH/N2)
10 2
NI limit (AT)
20%
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=54082×AL–1.0787
NI40%=43317×AL–1.0287
10 2
10 4
10 3
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=213.73×lg –0.6558
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level:0.5mA
• Ambient temperature:25°C
10
0
0
1
2
3
Total loss Pm (W)
4
5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(16/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EI40-Z
40.0±0.5
27.2 –0
40.0±0.5
6.2
11.65±0.35
6.2
SHAPES AND DIMENSIONS
7.0 20.25±0.25
11.65±0.35
27.25±0.25
11.65±0.35
7.5±0.3
Dimensions in mm
Based on JIS FEI 40.
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
0.520
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
77.0
Coil:ø0.35
148
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
11400
136
128
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
160.5
60
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
4860±25% 6520 min.
(W)max.
100kHz
200mT
100°C
3.66
2UEW 100Ts
○ Calculated output power (forward converter mode): 361W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
10 3
Temperature rise vs. Total loss
(Typ.)
100
10 3
Center pole gap
40%
AL-value(nH/N2)
NI limit (AT)
10 2
20%
Temperature rise of hot spot ΔT (°C)
10 4
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=61141×AL–1.0384
NI40%=48136×AL–0.9897
10 2
10 4
10 3
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=272.68×lg –0.6663
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level: 0.5mA
• Ambient temperature: 25°C
10
0
0
2
4
6
Total loss Pm (W)
8
10
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity:45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(17/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EI50-Z
50.0±0.7
+1.2
50.0 –0.7
33.5 –0
7.7
14.6±0.4
7.7
SHAPES AND DIMENSIONS
8.5 24.75±0.25
14.6±0.4
33.35±0.35
14.6±0.4
9.0±0.3
Dimensions in mm
Based on JIS FEI 50.
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
0.409
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
94.0
Coil:ø0.35
230
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
21620
213
202
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
246.3
115
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
6110±25% 8300 min.
(W)max.
100kHz
200mT
100°C
8.62
2UEW 100Ts
○ Calculated output power (forward converter mode): 554W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
10 3
Temperature rise of hot spot ΔT (°C)
10 4
10 3
Center pole gap
NI limit (AT)
10 2
20%
AL-value(nH/N2)
40%
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=102653×AL–1.0486
NI40%=77153×AL–0.9938
10 3
10 2
10 4
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=400.84×lg –0.6776
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level:0.5mA
• Ambient temperature: 25°C
10
0
0
2
4
6
Total loss Pm (W)
8
10
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(18/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EI60-Z
60.0±0.8
+1.4
60.0–0.8
43.6 –0
7.7
15.6±0.4
7.7
SHAPES AND DIMENSIONS
8.0
27.85±0.35
35.85±0.35
15.6±0.4
15.6±0.4
8.5±0.3
Dimensions in mm
Based on JIS FEI 60.
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
0.441
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
109
Coil:ø0.35
247
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
26900
243
231
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
402.4
139
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
5670±25% 7690 min.
(W)max.
100kHz
200mT
100°C
9.16
2UEW 100Ts
○ Calculated output power (forward converter mode): 712W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs.Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
Center pole gap
NI limit (AT)
40%
20%
AL-value(nH/N2)
10 3
10 2
Temperature rise of hot spot ΔT (°C)
10 4
10 3
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=158991×AL–1.0948
NI40%=110106×AL–1.0261
10 3
10 2
10 4
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=451.07×lg –0.6855
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level:0.5mA
• Ambient temperature:25°C
10
0
0
2
4
6
Total loss Pm (W)
8
10
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(19/52)
F E R R I T E S
Mn-Zn EE, EF Cores
F
F
C
Fig. 1
Fig 2
PC47
EE8
Material
Size of E core
AL-value
(Z: without air gap)
U.S. Iam. cores,
DIN standard
JIS
Core
PC47EE8-Z
PC47EE10/11-Z
PC47EF12.6-Z
-
JIS
FEE 8.3
JIS
FEE 10.2
DIN
41985
PC47EE13-Z
PC47EE16-Z
PC47EE19-Z
Z
Dimensions
(mm)
A
B
C
D
E min.
F
H
1
8.3±0.2
4.0±0.1
3.6±0.2
1.85±0.15
6.0
3.0±0.1
1.0
1
10.2±0.2
5.5±0.1
4.75±0.15
2.45±0.15
7.7
4.20±0.15
1.1
1
12.7±0.4
6.4±0.1
3.6±0.2
3.65±0.15
8.8
4.65±0.15
1.83
1
13.0±0.2
6.00±0.15
6.15±0.15
2.75±0.15
10.0
4.6±0.1
1.4
1
16.0±0.3
7.15±0.15
4.8±0.2
4.0±0.2
11.7
5.1±0.2
2.0
1
16.0±0.3
7.15±0.15
6.8±0.2
3.18±0.18
12.5
5.5±0.1
1.6
1
16.1±0.6
8.05±0.15
4.5±0.2
4.55±0.15
11.3
5.9±0.2
2.2
1
19.1±0.3
7.95±0.15
5.0±0.2
4.55±0.15
14.2
5.6±0.1
2.3
Effective
cross-sectional
area
Ae(mm2)
Effective
magnetic path
length
ℓe(mm)
JIS
FEE 16A
PC47SEE16-Z
PC47EF16-Z
A
C
B
B
Part No.
E
D
H
A
E
R1.6
H
D
H
H
SHAPES AND DIMENSIONS
DIN
41985
JIS
FEE 19A
Effective parameter
Core
factor
Part No.
C1(mm–1)
Electrical characteristics
Effective
core volume
Ve(mm3)
Weigh
(g)
AL-value
Core loss
(nH/N2)
1kHz
0.5mA
100Ts
Without air gap
(W) max.
100kHz
200mT
PC47EE8-Z
2.75
7.0
19.2
134
0.7
610±25%
PC47EE10/11-Z
2.16
12.1
26.1
315
1.5
850±25%
PC47EF12.6-Z
2.28
13.0
29.6
385
2.0
810±25%
PC47EE13-Z
1.77
17.1
30.2
517
2.7
1130±25%
PC47EE16-Z
1.82
19.0
34.5
656
3.3
1140±25%
PC47SEE16-Z
1.69
21.7
36.6
795
4.1
1240±25%
PC47EF16-Z
1.87
20.1
37.6
754
3.9
1100±25%
PC47EE19-Z
1.71
23.0
39.4
906
4.8
1250±25%
With air gap
40±7%
63±10%
40±7%
63±10%
63±7%
100±10%
63±7%
100±10%
80±7%
160±10%
80±7%
160±10%
63±7%
100±10%
80±7%
160±10%
100°C
0.05
0.12
0.16
0.22
0.28
0.34
0.31
0.39
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(20/52)
F E R R I T E S
Mn-Zn EE, EF Cores
F
A
E
D
H
A
E
R1.6
H
D
H
H
SHAPES AND DIMENSIONS
F
C
C
B
B
Fig. 1
Fig 2
PC47
EE19/16
Material
Size of E core
AL-value
(Z: without air gap)
U.S. Iam. cores,
DIN standard
JIS
Core
Part No.
PC47EE19/16-Z
PC47EE20/20/5-Z
PC47EF20-Z
-
PC47EF25-Z
PC47EE25.4-Z
PC47EE30-Z
Dimensions
(mm)
A
U.S.
EE-187
DIN
41295
DIN
41985
PC47EE22-Z
PC47EE25/19-Z
Z
U.S.
EE-24/25
DIN
41985
JIS
FEE 25.4A
JIS
FEE 30A
C
D
E min.
F
1
19.29±0.32 8.1±0.18
B
4.75±0.13
4.75±0.08
14.05
5.715±0.125 2.46
2
20.15±0.55 10.0±0.2
5.1±0.2
5.0±0.2
12.8
6.5±0.2
3.53
1
20.0±0.4
9.9±0.2
5.65±0.25
5.7±0.2
14.1
7.2±0.2
2.8
1
22.0±0.3
9.35±0.15
5.75±0.25
5.75±0.25
13.0
5.35±0.15
4.3
1
25.4±0.5
9.46±0.19
6.29±0.19
6.35±0.25
18.55
6.41±0.19
3.11
1
25.05±0.75 12.55±0.25
7.2±0.3
7.25±0.25
17.5
8.95±0.25
3.55
1
25.4±0.76
9.66±0.15
6.35±0.25
6.35±0.25
18.5
6.48±0.15
3.18
1
30.0±0.5
13.15±0.15
10.7±0.3
10.7±0.3
19.7
8.15±0.15
5.0
Effective
magnetic path
length
ℓe(mm)
Effective
core volume
Weigh
Effective parameter
Core
factor
Part No.
C1(mm–1)
H
Effective
cross-sectional
area
Ae(mm2)
Electrical characteristics
Ve(mm3)
(g)
AL-value
Core loss
(nH/N2)
(W) max.
100kHz
200mT
1kHz
0.5mA
100Ts
Without air gap
PC47EE19/16-Z
1.75
22.4
39.1
876
4.8
1350±25%
PC47EE20/20/5-Z
1.38
31.0
43.0
1340
7.5
1400±25%
PC47EF20-Z
1.34
33.5
44.9
1500
7.4
1570±25%
PC47EE22-Z
0.970
41.0
39.6
1620
8.8
2180±25%
PC47EE25/19-Z
1.22
40.0
48.7
1950
9.1
2000±25%
PC47EF25-Z
1.11
51.8
57.8
2990
15
2000±25%
PC47EE25.4-Z
1.21
40.3
48.7
1963
10
2000±25%
PC47EE30-Z
0.529
109.0
57.7
6290
32
4690±25%
With air gap
80±7%
160±10%
100±7%
160±10%
100±7%
160±10%
125±7%
250±10%
100±7%
200±10%
100±7%
160±10%
125±7%
250±10%
200±5%
400±7%
100°C
0.38
0.47
0.59
0.56
0.80
1.27
0.84
2.03
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(21/52)
F E R R I T E S
Mn-Zn EE, EF Cores
F
A
E
D
H
E
A
R1.6
H
D
H
H
SHAPES AND DIMENSIONS
F
C
C
B
B
Fig. 1
Fig 2
PC47
EE30/30/7
Material
Size of E core
Part No.
PC47EE30/30/7-Z
PC47EF32-Z
PC47EE35/28B-Z
PC47EE35-Z
PC47EE40-Z
PC47EE41/33C-Z
PC47EE42/42/15-Z
-
AL-value
(Z: without air gap)
U.S. Iam. cores,
DIN standard
JIS
DIN
41295
DIN
41985
U.S.
EE-375
JIS
FEE35B
JIS
FEE40A
U.S.
EE-21
DIN
41295
Z
JIS
FEE42A
Core
Dimensions
(mm)
A
B
C
D
E min.
F
H
2
30.1±0.7
15.0±0.2
7.05±0.25
6.95±0.25
19.5
9.95±0.25
5.1
1
32.1±0.8
16.1±0.3
9.15±0.35
9.2±0.3
22.7
11.6±0.3
4.4
1
34.6±0.5
14.27±0.37
9.31±0.30
9.4±0.3
25.0
9.78±0.25
4.5
1
34.54±1.0
14.35±0.35
9.53±0.38
9.39±0.27
24.89
9.71±0.28
4.75
1
40.0±0.5
17.0±0.3
10.7±0.3
10.7±0.3
27.4
10.25±0.25
6.0
1
41.07±0.8
16.78±0.4
12.57±0.38
12.64±0.45
28.55
10.38±0.3
6.0
1
42.15±0.85
21.0±0.2
14.95±0.25
11.95±0.25
29.5
15.15±0.35
6.025
Effective parameter
Core
factor
Part No.
C1(mm–1)
Effective
cross-sectional
area
Ae(mm2)
Electrical characteristics
Effective
magnetic path
length
ℓe(mm)
Effective
core volume
Ve(mm3)
Weigh
(g)
AL-value
Core loss
(nH/N2)
(W) max.
100kHz
200mT
1kHz
0.5mA
100Ts
Without air gap
PC47EE30/30/7-Z
1.12
59.7
66.9
4000
22
2100±25%
PC47EF32-Z
0.893
83.2
74.3
6180
32
2590±25%
PC47EE35/28B-Z
0.819
84.9
69.6
5907
28
2950±25%
PC47EE35-Z
0.774
89.3
69.2
6179
57
3170±25%
PC47EE40-Z
0.606
128
77.3
9890
50
4150±25%
PC47EE41/33C-Z
0.495
157
77.6
12200
64
5060±25%
PC47EE42/42/15-Z
0.534
182
97.0
17600
80
4700±25%
With air gap
160±5%
250±7%
160±5%
250±7%
200±5%
400±7%
200±5%
400±7%
200±5%
400±7%
200±5%
400±7%
250±5%
400±7%
100°C
1.41
2.09
2.02
2.14
3.10
4.10
5.94
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(22/52)
F E R R I T E S
Mn-Zn EE, EF Cores
F
A
E
D
H
A
E
R1.6
H
D
H
H
SHAPES AND DIMENSIONS
F
C
C
B
B
Fig. 1
Fig 2
PC47
42/42/20
Material
Size of E core
Part No.
PC47EE42/42/20-Z
PC47EE47/39-Z
PC47EE50-Z
PC47EE55/55/21-Z
PC47EE57/47-Z
PC47EE60-Z
-
AL-value
(Z: without air gap)
U.S. Iam. cores,
DIN standard
JIS
DIN
41295
U.S.
EE-625
JIS
FEE50A
DIN
41295
U.S.
EE-75
JIS
FEE60A
Z
Core
JIS
FEE42B
JIS
FEE55
Dimensions
(mm)
A
B
C
D
E min.
F
H
1
42.15±0.85
21.0±0.2
19.7±0.3
11.95±0.25
29.5
15.15±0.35
6.025
Fig.1
47.12±0.48
19.63±0.2
15.62±0.25
15.62±0.25
31.72
12.2±0.13
7.49
Fig.1
50.0 –0.7
21.3±0.3
14.6±0.4
14.6±0.4
34.2
12.75±0.25
7.5
Fig.1
55.15±1.05
27.5±0.3
20.7±0.3
16.95±0.25
37.5
18.8±0.3
8.53
Fig.1
56.57±1.0
23.60±0.23
18.8±0.25
18.80±0.25
38.1
14.63±0.15
9.02
Fig.1
60.0 –0.8
22.3±0.3
15.6±0.4
15.6±0.4
43.8
14.05±0.25
7.7
+1.0
+1.1
Effective parameter
Core
factor
Part No.
C1(mm–1)
Effective
cross-sectional
area
Ae(mm2)
Electrical characteristics
Effective
magnetic path
length
ℓe(mm)
Effective
core volume
Ve(mm3)
Weigh
(g)
AL-value
Core loss
(nH/N2)
1kHz
0.5mA
100Ts
Without air gap
(W) max.
100kHz
200mT
PC47EE42/42/20-Z
0.415
235
97.4
22900
116
6100±25%
PC47EE47/39-Z
0.374
242
90.6
21930
108
6660±25%
PC47EE50-Z
0.425
226
95.8
21600
116
6110±25%
PC47EE55/55/21-Z
0.348
354
123
43700
234
7100±25%
PC47EE57/47-Z
0.297
344
102
35100
190
8530±25%
PC47EE60-Z
0.446
247
110
27100
135
5670±25%
With air gap
250±5%
400±7%
250±5%
400±7%
250±5%
500±7%
250±5%
400±7%
250±5%
400±7%
250±5%
500±7%
100°C
9.65
9.04
8.78
18.51
14.79
11.35
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(23/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EE10/11-Z
7.7–0
10.2±0.2
1.1
2.45±0.15
1.1
SHAPES AND DIMENSIONS
4.2±0.15 1.3
5.5±0.1
4.75±0.15
11.0±0.2
Dimensions in mm
Based on JIS FEE 10.2.
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
2.16
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
26.1
Coil:ø0.18
12.1
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
315
11.6
10.6
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
23.3
1.5
AL-value Core loss
(nH/N2)
1kHz
0.5mA
100kHz
200mT
(W)max.
100kHz
200mT
100°C
850±25%
1450 min.
0.12
2UEW 100Ts
○ Calculated output power (forward converter mode): 12.1W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
Temperature rise of hot spot ΔT (°C)
10 4
10 3
10 3
AL-value(nH/N2)
NI limit (AT)
10 2
40%
20%
10 2
Center pole gap
101
10 1
50
Temp: 100°C
100 1
10
NI20%=3523.1×AL–0.9868
NI40%=4143.6×AL–1.0045
10 2
10 4
10 3
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=25.632×lg –0.713
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.18 2UEW 100Ts
• Frequency:1kHz
• Current level: 0.5mA
• Ambient temperature: 25°C
10
0
0
0.5
Total loss Pm (W)
1
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity:45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(24/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EE13-Z
4.6±0.1
6.0±0.15
1.4
6.15±0.15
10.0 –0
13.0±0.2
1.4
2.75±0.15
1.4
SHAPES AND DIMENSIONS
12.0±0.3
Dimensions in mm
Based on JIS FEI 12.5.
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
1.77
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
30.2
Coil:ø0.18
17.1
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
517
16.9
15.6
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
34.3
2.7
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
1130±25% 1770 min.
(W)max.
100kHz
200mT
100°C
0.22
2UEW 100Ts
○ Calculated output power (forward converter mode): 25W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
Temperature rise of hot spot ΔT (°C)
10 4
10 3
10 3
NI limit (AT)
10 2
AL-value(nH/N2)
40%
20%
Center pole gap
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=5854.5×AL–1.0033
NI40%=5944.6×AL–0.9838
10 2
10 4
10 3
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=37.329×lg –0.7088
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.18 2UEW 100Ts
• Frequency:1kHz
• Current level: 0.5mA
• Ambient temperature: 25°C
10
0
0
0.5
Total loss Pm (W)
1
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity:45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(25/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EE16-Z
16.0±0.3
4.0±0.2
4.8±0.2
2.0
7.15±0.15 5.1±0.2
11.7min.
2.0
SHAPES AND DIMENSIONS
14.3±0.2
Dimensions in mm
Effective parameter
Core
factor
C1
(mm–1)
1.82
Effective
magnetic path
length
ℓe
(mm)
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
34.5
Coil:ø0.18
19.0
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
656
19.2
17.5
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
41.4
3.3
AL-value (nH/N2)
1kHz
0.5mA
1140±25%
Core loss
100kHz
200mT
(W)max.
100kHz
200mT
100°C
0.28
2UEW 100Ts
○ Calculated output power (forward converter mode): 32W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
10 4
10 3
10 3
NI limit (AT)
10 2
AL-value(nH/N2)
40%
20%
Center pole gap
10 2
101
10 1
Temp: 100°C
100 1
10
NI20%=7613.6×AL–1.0283
NI40%=7120.7×AL–0.9954
10 3
10 2
10 4
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=43.215×lg –0.6899
0.10
1
Air gap length (mm)
10
Measuring conditions
• Coil:ø0.18 2UEW 100Ts
• Frequency:1kHz
• Current level:0.5mA
• Ambient temperature:25°C
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(26/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EE19-Z
7.95±0.15 5.6±0.1
5.0±0.2
14.2min.
19.1±0.3
2.3
4.55±0.15
2.3
SHAPES AND DIMENSIONS
18.3±0.3
Dimensions in mm
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
1.71
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
39.4
Coil:ø0.18
23.0
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
2
(mm )
(mm2)
Ve
(mm3)
906
22.8
21.1
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
55.8
4.8
AL-value (nH/N2)
1kHz
0.5mA
1250±25%
Core loss
100kHz
200mT
(W)max.
100kHz
200mT
100°C
0.39
2UEW 100Ts
○ Calculated output power (forward converter mode): 45W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
10 4
10 3
10 3
NI limit (AT)
10 2
AL-value(nH/N2)
40%
20%
Center pole gap
10 2
101
10 1
Temp: 100°C
100 1
10
NI20%=9406.9×AL–1.0365
NI40%=8890×AL–1.0063
10 3
10 2
10 4
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=49.44×lg –0.6999
0.10
1
Air gap length (mm)
10
Measuring conditions
• Coil:ø0.18 2UEW 100Ts
• Frequency:1kHz
• Current level: 0.5mA
• Ambient temperature: 25°C
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(27/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EE25/19-Z
3.05
6.29±0.19
9.46±0.19
6.41±0.19
18.92±0.38
18.55–0
25.4±0.5
3.11
6.35±0.25
3.11
SHAPES AND DIMENSIONS
Dimensions in mm
Effective parameter
Core
factor
Electrical characteristics
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
1.22
Effective
cross-sectional
area
Ae
(mm2)
48.7
Coil:ø0.23
40.0
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
2
(mm )
(mm2)
Ve
(mm3)
1950
39.9
37.2
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
79.0
9.1
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
2000±25% 2570 min.
(W)max.
100kHz
200mT
100°C
0.80
2UEW 100Ts
○ Calculated output power (forward converter mode): 93W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
10 3
NI limit (AT)
AL-value(nH/N2)
40%
10 2
20%
Center pole gap
10 2
101
10 1
Temperature rise of hot spot ΔT (°C)
10 4
10 3
50
Temp: 100°C
100 1
10
NI20%=19390×AL–1.086
NI40%=17100×AL–1.0412
10 2
10 4
10 3
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=80.145×lg –0.7002
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.23 2UEW 100Ts
• Frequency:1kHz
• Current level: 0.5mA
• Ambient temperature: 25°C
10
0
0
0.5
1
1.5
Total loss Pm (W)
2
2.5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(28/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EE30-Z
13.15±0.15 8.15±0.15
10.7±0.3
26.3±0.3
19.7min.
30.0±0.5
5.0
10.7±0.3
5.0
SHAPES AND DIMENSIONS
Dimensions in mm
Based on DIN 41295.
Effective parameter
Core
factor
C1
(mm–1)
0.529
Effective
magnetic path
length
ℓe
(mm)
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
57.7
Coil:ø0.35
109.9
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
6290
114
108
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
75.8
32
AL-value (nH/N2)
1kHz
0.5mA
4690±25%
Core loss
100kHz
200mT
(W)max.
100kHz
200mT
100°C
2.03
2UEW 100Ts
○ Calculated output power (forward converter mode): 203W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
10 3
10 4
10 3
40%
Center pole gap
20%
NI limit (AT)
AL-value(nH/N2)
10 2
10 2
101
10 1
Temp: 100°C
100 1
10
NI20%=51771×AL–1.0548
NI40%=45443×AL–1.0177
10 3
10 2
10 4
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=187.03×lg –0.7782
0.10
1
Air gap length (mm)
10
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level:0.5mA
• Ambient temperature:25°C
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(29/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EE40-Z
17.0±0.3
10.25±0.25
10.7±0.3
27.4min.
40.0±0.5
6.0
10.7±0.3
6.0
SHAPES AND DIMENSIONS
34.0±0.6
Dimensions in mm
Effective parameter
Core
factor
C1
(mm–1)
0.060
Effective
magnetic path
length
ℓe
(mm)
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
77.3
Coil:ø0.18
128
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
9890
114
108
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
164
50
AL-value (nH/N2)
1kHz
0.5mA
4150±25%
Core loss
100kHz
200mT
(W)max.
100kHz
200mT
100°C
3.1
2UEW 100Ts
○ Calculated output power (forward converter mode): 311W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
10 3
10 4
10 3
Center pole gap
NI limit (AT)
10 2
AL-value(nH/N2)
40%
20%
10 2
101
10 1
Temp: 100°C
100 1
10
NI20%=61961×AL–1.0729
NI40%=54815×AL–1.0418
10 3
10 2
10 4
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=192.01×lg –0.7318
0.10
1
Air gap length (mm)
10
Measuring conditions
• Coil:ø0.18 2UEW 100Ts
• Frequency:1kHz
• Current level:0.5mA
• Ambient temperature:25°C
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(30/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EE50-Z
21.3±0.3
12.75±0.25
14.6±0.4
50.0 +1.0
–0.7
34.2min.
7.5
14.6±0.4
7.5
SHAPES AND DIMENSIONS
42.6±0.6
Dimensions in mm
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
0.425
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
95.8
Coil:ø0.18
226
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
21600
213
202
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
262
116
AL-value (nH/N2)
1kHz
0.5mA
6110±25%
Core loss
100kHz
200mT
(W)max.
100kHz
200mT
100°C
8.78
2UEW 100Ts
○ Calculated output power (forward converter mode): 556W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
10 3
10 4
10 3
20% 40%
NI limit (AT)
AL-value(nH/N2)
10 2
Center pole gap
10 2
101
10 1
Temp: 100°C
100 1
10
NI20%=130128×AL–1.0855
NI40%=100631×AL–1.0317
10 2
10 4
10 3
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=326.7×lg –0.7317
0.10
1
Air gap length (mm)
10
Measuring conditions
• Coil:ø0.18 2UEW 100Ts
• Frequency:1kHz
• Current level:0.5mA
• Ambient temperature: 25°C
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(31/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EE60-Z
22.3±0.3
14.05±0.25
15.6±0.4
60.0 +1.1
–0.8
43.8min.
7.7
15.6±0.4
7.7
SHAPES AND DIMENSIONS
44.6±0.6
Dimensions in mm
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
0.446
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
110
Coil:ø0.18
247
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
27100
243
231
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
407
135
AL-value (nH/N2)
1kHz
0.5mA
5670±25%
Core loss
100kHz
200mT
(W)max.
100kHz
200mT
100°C
11.35
2UEW 100Ts
○ Calculated output power (forward converter mode): 713W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
10 3
10 4
10 3
NI limit (AT)
20%
AL-value(nH/N2)
40%
10 2
Center pole gap
10 2
101
10 1
Temp: 100°C
100 1
10
NI20%=167915×AL–1.1093
NI40%=128966×AL–1.0535
10 3
10 2
10 4
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=373.02×lg –0.7405
0.10
1
Air gap length (mm)
10
Measuring conditions
• Coil:ø0.18 2UEW 100Ts
• Frequency:1kHz
• Current level: 0.5mA
• Ambient temperature: 25°C
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(32/52)
F E R R I T E S
Mn-Zn EER Cores
E
A
øD
E
F
H
H
A
øD
H
H
SHAPES AND DIMENSIONS
F
C
C
B
B
Fig. 1
Fig. 2
PC47
EER25.5
Material
Size of E core
Part No.
PC47EER25.5-Z
PC95EER25.5-Z
PC47EER28-Z
PC95EER28-Z
PC47EER28L-Z
PC95EER28L-Z
PC47EER35-Z
PC95EER35-Z
PC47EER40-Z
PC95EER40-Z
PC47EER42-Z
-
U.S. Iam. cores,
DIN standard
JIS
JIS
FEER25.5A
JIS
FEER28.5A
JIS
FEER28.5B
JIS
FEER35A
JIS
FEER42
PC47EER42/42/20-Z
PC47EER49-Z
Part No.
PC47EER25.5-Z
PC95EER25.5-Z
PC47EER28-Z
PC95EER28-Z
PC47EER28L-Z
PC95EER28L-Z
PC47EER35-Z
PC95EER35-Z
PC47EER40-Z
PC95EER40-Z
Z
AL-value
(Z: without air gap)
Core
Dimensions
(mm)
A
B
C
øD
E min.
F
H
Fig.1
25.5±0.5
9.3±0.2
7.5±0.2
7.5±0.15
19.8
6.2±0.2
2.6
Fig.2
28.55±0.55
14.0±0.2
11.4±0.25
9.9±0.25
21.2
9.65±0.25
3.4
Fig.2
28.55±0.55
16.9±0.25
11.4±0.25
9.9±0.25
21.2
12.53±0.28
3.4
Fig.1
35.0±0.5
20.7±0.2
11.3±0.2
11.3±0.15
25.6
14.7±0.3
4.43
Fig.1
40.0±0.5
22.4±0.2
13.3±0.25
13.3±0.25
29.0
15.4±0.3
5.28
Fig.1
42.0±0.6
22.4±0.2
15.5±0.25
15.5±0.25
29.4
15.4±0.3
6.0
Fig.2
Fig.1
42.15±0.65
49.0±0.8
21.2±0.2
19.0±0.3
19.60±0.4
17.2±0.4
17.3±0.25
17.2±0.25
31.8
36.4
15.25±0.25
12.4±0.2
4.93
6.0
Effective parameter
Core
Effective
factor
cross-sectional
area
C1(mm–1)
Ae(mm2)
Effective
Effective
magnetic path core volume
length
ℓe(mm)
Ve(mm3)
Weigh
(g)
Electrical characteristics
AL-value
(nH/N2)
1kHz
0.5mA
100Ts
Without air gap
1920±25%
2700±25%
2870±25%
4000±25%
2520±25%
3500±25%
2770±25%
4000±25%
3620±25%
5200±25%
1.08
44.8
48.2
2160
11
0.780
82.1
64.0
5250
28
0.928
81.4
75.5
6150
33
0.849
107
90.8
9720
52
0.658
149
98.0
14600
78
PC47EER42-Z
0.509
194
98.8
19200
102
4690±25%
PC47EER42/42/20-Z
0.411
240
98.6
23700
116
5340±25%
PC47EER49-Z
0.395
231
91.3
21100
110
6250±25%
Core loss
(W) max.
100kHz
200mT
With air gap
100°C
25°C
80°C
120°C
100±5%
200±7%
200±5%
400±7%
160±5%
315±7%
200±5%
400±7%
200±5%
400±7%
250±5%
500±7%
250±5%
500±7%
250±5%
500±7%
0.75
—
1.72
—
2.03
—
3.18
—
4.77
—
—
1.1
—
2.45
—
2.9
—
4.55
—
6.8
—
0.9
—
2.1
—
2.45
—
3.8
—
5.7
—
1.1
—
2.45
—
2.9
—
4.55
—
6.8
6.47
—
—
—
9.96
—
—
—
4.03
—
—
—
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(33/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EER25.5-Z
7.5±0.2
6.2±0.2
9.3±0.2
2.6
19.8–0
ø7.5±0.15
25.5±0.5
2.6
SHAPES AND DIMENSIONS
Dimensions in mm
Based on JIS FEER 25.5A.
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
1.08
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
48.2
Coil:ø0.35
44.8
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
2160
44.2
42.4
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
79.4
11
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
1920±25% 2910 min.
(W)max.
100kHz
200mT
100°C
0.75
2UEW 100Ts
○ Calculated output power (forward converter mode): 112W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
Temperature rise of hot spot ΔT (°C)
10 4
10 3
10 3
NI limit (AT)
AL-value(nH/N2)
40%
10 2
20%
Center pole gap
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=21135×AL–1.0681
NI40%=20761×AL–1.0453
10 3
10 2
10 4
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=79.745×lg –0.7453
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level: 0.5mA
• Ambient temperature: 25°C
10
0
0
0.5
1
1.5
Total loss Pm (W)
2
2.5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity:45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(34/52)
F E R R I T E S
Mn-Zn E series Part No.: PC95EER25.5-Z
7.5±0.2
6.2±0.2
9.3±0.2
2.6
19.8–0
ø7.5±0.15
25.5±0.5
2.6
SHAPES AND DIMENSIONS
Dimensions in mm
Based on JIS FEER 25.5A.
Effective parameter
Core
factor
Electrical characteristics
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
1.08
Effective
cross-sectional
area
Ae
(mm2)
48.2
Coil:ø0.35
44.8
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
2160
44.2
42.4
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
79.4
11
AL-value Core loss
(nH/N2)
1kHz
0.5mA
(W)max.
100kHz
200mT
25°C
80°C
120°C
2700±25%
1.1
0.9
1.1
2UEW 100Ts
○ Calculated output power (forward converter mode): 96W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
10 4
Temperature rise of hot spot ΔT (°C)
10 3
10 3
40%
AL-value(nH/N2)
NI limit (AT)
10 2
20%
Center pole gap
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=18523×AL–1.0529
NI40%=16876×AL–1.0189
10 3
10 2
10 4
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=80.185×lg –0.7553
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level:0.5mA
• Ambient temperature: 25°C
10
0
0
0.5
1
1.5
Total loss Pm (W)
2
2.5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(35/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EER28-Z
21.2–0
11.4±0.25
9.65±0.25
14.0±0.2
3.4
ø9.9±0.25
28.55±0.55
3.4
SHAPES AND DIMENSIONS
Dimensions in mm
Based on JIS FEER 28.5A.
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
(W)max.
100kHz
200mT
100°C
0.78
64.0
Coil:ø0.35
82.1
5250
77.0
73.1
114
28
2870±25% 4350 min.
1.72
2UEW 100Ts
○ Calculated output power (forward converter mode): 233W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
10 4
Temperature rise of hot spot ΔT (°C)
10 3
NI limit (AT)
40%
20%
AL-value(nH/N2)
10 3
10 2
Center pole gap
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=30622×AL–1.0165
NI40%=26734×AL–0.9818
10 2
10 4
10 3
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=130.48×lg –0.7569
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level:0.5mA
• Ambient temperature:25°C
10
0
0
0.5
1
1.5
Total loss Pm (W)
2
2.5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(36/52)
F E R R I T E S
Mn-Zn E series Part No.: PC95EER28-Z
21.2–0
11.4±0.25
9.65±0.25
14.0±0.2
3.4
ø9.9±0.25
28.55±0.55
3.4
SHAPES AND DIMENSIONS
Dimensions in mm
Based on JIS FEER 28.5A.
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
0.78
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
64.0
Coil:ø0.35
82.1
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
5250
77.0
73.1
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
114
28
AL-value Core loss
(nH/N2)
1kHz
0.5mA
(W)max.
100kHz
200mT
25°C
80°C
120°C
4000±25%
2.45
2.1
2.45
2UEW 100Ts
○ Calculated output power (forward converter mode): 223W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
10 4
Temperature rise of hot spot ΔT (°C)
10 3
10 3
NI limit (AT)
40%
20%
AL-value(nH/N2)
Center pole gap
10 2
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=33532×AL–1.0372
NI40%=30341×AL–1.0078
10 3
10 2
10 4
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=130.82×lg –0.7606
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level:0.5mA
• Ambient temperature: 25°C
10
0
0
0.5
1
1.5
Total loss Pm (W)
2
2.5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(37/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EER28L-Z
21.2–0
11.4±0.25
12.53±0.28
3.4
ø9.9±0.25
28.55±0.55
3.4
SHAPES AND DIMENSIONS
16.9±0.25
Dimensions in mm
Based on JIS FEER 28.5B.
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
(W)max.
100kHz
200mT
100°C
0.928
75.5
Coil:ø0.35
81.4
6150
77.0
73.1
148
33
2520±25% 3660 min.
2.03
2UEW 100Ts
○ Calculated output power (forward converter mode): 267W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
Temperature rise of hot spot ΔT (°C)
10 4
10 3
10 3
NI limit (AT)
AL-value(nH/N2)
40%
10 2
20%
Center pole gap
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=28528×AL–1.0085
NI40%=25474×AL–0.9767
10 2
10 4
10 3
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=131.22×lg –0.7413
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level: 0.5mA
• Ambient temperature: 25°C
10
0
0
0.5
1
1.5
Total loss Pm (W)
2
2.5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(38/52)
F E R R I T E S
Mn-Zn E series Part No.: PC95EER28L-Z
21.2–0
11.4±0.25
12.53±0.28
3.4
ø9.9±0.25
28.55±0.55
3.4
SHAPES AND DIMENSIONS
16.9±0.25
Dimensions in mm
Based on JIS FEER 28.5B.
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
0.928
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
75.5
Coil:ø0.35
81.4
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
6150
77.0
73.1
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
148
33
AL-value Core loss
(nH/N2)
1kHz
0.5mA
(W)max.
100kHz
200mT
25°C
80°C
120°C
3500±25%
2.9
2.45
2.9
2UEW 100Ts
○ Calculated output power (forward converter mode): 250W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
10 4
10 3
40%
Center pole gap
AL-value(nH/N2)
10 2
NI limit (AT)
Temperature rise of hot spot ΔT (°C)
10 3
20%
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=31563×AL–1.0339
NI40%=28022×AL–0.9986
10 2
10 4
10 3
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=132.02×lg –0.7505
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level:0.5mA
• Ambient temperature: 25°C
10
0
0
0.5
1
1.5
Total loss Pm (W)
2
2.5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(39/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EER35-Z
14.7±0.3
11.3±0.2
20.7±0.2
4.43
25.6 –0
ø11.3±0.15
35.0±0.5
4.43
SHAPES AND DIMENSIONS
Dimensions in mm
Based on JIS FEER 35A.
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
(W)max.
100kHz
200mT
100°C
0.849
90.8
Coil:ø0.35
107
9720
100
97.6
218
52
2770±25% 4000 min.
3.18
2UEW 100Ts
○ Calculated output power (forward converter mode): 376W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
10 4
Temperature rise of hot spot ΔT (°C)
10 3
10 3
Center pole gap
NI limit (AT)
AL-value(nH/N2)
40%
10 2
20%
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=44145×AL–1.0375
NI40%=37001×AL–0.9963
10 3
10 2
10 4
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=169.52×lg –0.708
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level:0.5mA
• Ambient temperature:25°C
10
0
0
1
2
3
Total loss Pm (W)
4
5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(40/52)
F E R R I T E S
Mn-Zn E series Part No.: PC95EER35-Z
14.7±0.3
11.3±0.2
20.7±0.2
4.43
25.6 –0
ø11.3±0.15
35.0±0.5
4.43
SHAPES AND DIMENSIONS
Dimensions in mm
Based on JIS FEER 35A.
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
AL-value Core loss
(nH/N2)
(W)max.
100kHz
200mT
1kHz
0.5mA
0.849
90.8
Coil:ø0.35
107
9720
100
97.6
218
52
4000±25%
25°C
80°C
120°C
4.55
3.8
4.55
2UEW 100Ts
○ Calculated output power (forward converter mode): 336W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
100
10 4
10 3
20%
Center pole gap
40%
NI limit (AT)
AL-value(nH/N2)
10 2
Temperature rise of hot spot ΔT (°C)
10 3
Temperature rise vs. Total loss
(Typ.)
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=44380×AL–1.0404
NI40%=36795×AL–0.996
10 3
10 2
10 4
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=173.22×lg –0.7466
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level:0.5mA
• Ambient temperature: 25°C
10
0
0
1
2
3
Total loss Pm (W)
4
5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(41/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EER40-Z
15.4±0.3
13.3±0.25
22.4±0.2
5.28
29.0 –0
ø13.3±0.25
40.0±0.5
5.28
SHAPES AND DIMENSIONS
Dimensions in mm
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
2
(mm )
(mm2)
Ve
(mm3)
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
(W)max.
100kHz
200mT
100°C
0.658
98.0
Coil:ø0.35
149
14600
139
134
249
78
3620±25% 5160 min.
4.77
2UEW 100Ts
○ Calculated output power (forward converter mode): 484W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
10 4
20%
10 3
40%
Center pole gap
NI limit (AT)
AL-value(nH/N2)
10 2
Temperature rise of hot spot ΔT (°C)
10 3
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=61023×AL–1.0402
NI40%=51971×AL–1.0019
10 3
10 2
10 4
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=224.34×lg –0.7308
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level: 0.5mA
• Ambient temperature: 25°C
10
0
0
1
2
3
Total loss Pm (W)
4
5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(42/52)
F E R R I T E S
Mn-Zn E series Part No.: PC95EER40-Z
15.4±0.3
13.3±0.25
22.4±0.2
5.28
29.0 –0
ø13.3±0.25
40.0±0.5
5.28
SHAPES AND DIMENSIONS
Dimensions in mm
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
0.658
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
98.0
Coil:ø0.35
149
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
2
(mm )
(mm2)
Ve
(mm3)
14600
139
134
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
249
78
AL-value Core loss
(nH/N2)
1kHz
0.5mA
(W)max.
100kHz
200mT
25°C
80°C
120°C
5200±25%
6.8
5.7
6.8
2UEW 100Ts
○ Calculated output power (forward converter mode): 446W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
100
10 4
20%
10 3
40%
NI limit (AT)
AL-value(nH/N2)
10 2
Temperature rise of hot spot ΔT (°C)
10 3
Temperature rise vs. Total loss
(Typ.)
Center pole gap
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=64002×AL–1.0587
NI40%=55526×AL–1.0226
10 3
10 2
10 4
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=233.27×lg –0.7598
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level:0.5mA
• Ambient temperature:25°C
10
0
0
1
2
3
Total loss Pm (W)
4
5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(43/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EER42-Z
6.0
29.4–0
ø15.5±0.25
42.0±0.6
6.0
SHAPES AND DIMENSIONS
15.4±0.3
15.5±0.25
22.4±0.2
Dimensions in mm
Based on JIS FEER 42.
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
(W)max.
100kHz
200mT
100°C
0.509
98.8
Coil:ø0.35
194
19200
187
183
223
102
4690±25% 6670 min.
6.47
2UEW 100Ts
○ Calculated output power (forward converter mode): 540W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
10 4
NI limit (AT)
20%
40%
AL-value(nH/N2)
10 3
10 2
Temperature rise of hot spot ΔT (°C)
10 3
Center pole gap
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=101246×AL–1.0752
NI40%=78083×AL–1.0192
10 3
10 2
10 4
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=295.37×lg –0.7535
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level: 0.5mA
• Ambient temperature: 25°C
10
0
0
1
2
3
Total loss Pm (W)
4
5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(44/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47EER42/42/20-Z
19.6±0.4
15.25±0.25
21.2±0.2
4.93
31.8–0
42.15±0.65
ø17.3±0.25
4.93
SHAPES AND DIMENSIONS
Dimensions in mm
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
2
(mm )
(mm2)
Ve
(mm3)
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
(W)max.
100kHz
200mT
100°C
0.411
98.6
Coil:ø0.35
240
23700
235
228
229
116
5340±25% 8260 min.
9.96
2UEW 100Ts
○ Calculated output power (forward converter mode): 647W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
10 4
10 3
20%
Center pole gap
40%
NI limit (AT)
AL-value(nH/N2)
10 2
Temperature rise of hot spot ΔT (°C)
10 3
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=124448×AL–1.0739
NI40%=105174×AL–1.0326
10 2
10 4
10 3
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=353.39×lg –0.7591
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level: 0.5mA
• Ambient temperature: 25°C
10
0
0
1
2
3
Total loss Pm (W)
4
5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(45/52)
F E R R I T E S
Mn-Zn ETD Cores
F
E
A
øD
SHAPES AND DIMENSIONS
C
B
PC47
ETD19
Material
Size of E core
Part No.
-
Z
AL-value
(Z: without air gap)
Dimensions
(mm)
JIS
A
B
C
øD
E
F
PC47ETD19-Z
19.6±0.5
13.65±0.15
7.4±0.2
7.4±0.2
14.9±0.5
9.4±0.2
PC47ETD24-Z
24.4±0.6
14.45±0.15
8.5±0.4
8.5±0.2
18.6±0.6
10.1±0.2
PC47ETD29-Z
29.8±0.8
15.80±0.15
9.5±0.3
9.5±0.3
22.7±0.7
11.0±0.3
34.2±0.8
17.3±0.2
10.88±0.38
10.8±0.3
26.3±0.7
12.1±0.3
39.1±0.9
19.8±0.2
12.58±0.38
12.5±0.3
30.1±0.8
14.6±0.4
44.0±1.0
22.3±0.2
14.9±0.5
14.8±0.4
33.3±0.8
16.5±0.4
48.7±1.1
24.7±0.2
16.4±0.5
16.3±0.4
37.0±0.9
18.1±0.4
PC47ETD34-Z
PC47ETD39-Z
PC47ETD44-Z
PC47ETD49-Z
JIS
FEER 34.2
JIS
FEER 39.1
JIS
FEER 44
JIS
FEER 48.7
Effective parameter
Core
factor
Part No.
C1(mm–1)
Effective
cross-sectional
area
Ae(mm2)
Electrical characteristics
Effective
magnetic path
length
ℓe(mm)
Effective
core volume
Weigh
AL-value
Core loss
Ve(mm3)
(g)
(nH/N2)
1kHz
0.5mA
100Ts
Without air gap
(W) max.
100kHz
200mT
PC47ETD19-Z
1.32
41.3
54.6
2260
14
1720±25%
PC47ETD24-Z
1.100
56.3
61.9
3480
20
2125±25%
PC47ETD29-Z
0.959
73.6
70.6
5200
28
2500±25%
PC47ETD34-Z
0.810
97.1
78.6
7630
40
2780±25%
PC47ETD39-Z
0.737
125
92.1
11500
60
3150±25%
PC47ETD44-Z
0.589
175
103
18000
94
4000±25%
PC47ETD49-Z
0.535
213
114
24300
124
4440±25%
With air gap
80±5%
160±7%
100±5%
200±7%
200±5%
400±10%
200±5%
400±7%
200±5%
400±7%
250±5%
400±7%
250±5%
400±7%
100°C
1.01
1.51
1.75
2.52
3.96
6.20
10.25
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(46/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47ETD19-Z
13.65±0.15
9.4±0.2
19.6±0.5
14.9±0.5
ø7.4±0.2
SHAPES AND DIMENSIONS
7.4±0.2
4.25
27.3±0.3
Dimensions in mm
Effective parameter
Core
factor
Electrical characteristics
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
Effective
cross-sectional
area
Ae
(mm2)
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
2
(mm )
(mm2)
Ve
(mm3)
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
(W)max.
100kHz
200mT
100°C
1.32
54.6
Coil:ø0.35
41.3
2260
43
40.7
70.5
13.3
1720±25% 2380 min.
1.01
2UEW 100Ts
○ Calculated output power (forward converter mode): 114W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
10 3
AL-value(nH/N2)
40%
10 2
NI limit (AT)
20%
Center pole gap
10 2
101
10 1
Temperature rise of hot spot ΔT (°C)
10 4
10 3
50
Temp: 100°C
100 1
10
NI20%=15034×AL–1.0227
NI40%=17637×AL–1.0339
10 3
10 2
10 4
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=78.324×lg –0.7222
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level: 0.5mA
• Ambient temperature: 25°C
10
0
0
0.5
1
1.5
Total loss Pm (W)
2
2.5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(47/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47ETD24-Z
14.45±0.15
24.4±0.6
18.6±0.6
ø8.5±0.2
SHAPES AND DIMENSIONS
8.5±0.4
10.1±0.2 4.35
28.9±0.3
Dimensions in mm
Effective parameter
Core
factor
Electrical characteristics
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
Effective
cross-sectional
area
Ae
(mm2)
Effective
core volume
Ve
(mm3)
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
2
(mm )
(mm2)
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
(W)max.
100kHz
200mT
100°C
1.10
61.9
Coil:ø0.35
56.3
3480
56.7
54.1
102
19.5
2125±25% 2860 min.
1.51
2UEW 100Ts
○ Calculated output power (forward converter mode): 131W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
Temperature rise of hot spot ΔT (°C)
10 4
10 3
10 3
20%
AL-value(nH/N2)
NI limit (AT)
10 2
40%
Center pole gap
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=25757×AL–1.0521
NI40%=22953×AL–1.0159
10 2
10 4
10 3
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=101.54×lg –0.7296
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level:0.5mA
• Ambient temperature:25°C
10
0
0
0.5
1
1.5
Total loss Pm (W)
2
2.5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(48/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47ETD29-Z
15.8±0.15
29.8±0.8
ø9.5±0.3
22.7±0.7
SHAPES AND DIMENSIONS
9.5±0.3
11.0±0.3 4.8
31.6±0.3
Dimensions in mm
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
Effective
core volume
Ve
(mm3)
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
2
(mm )
(mm2)
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
(W)max.
100kHz
200mT
100°C
0.959
70.6
Coil:ø0.35
73.6
5200
70.9
66.5
145.2
28
2500±25% 3540 min.
1.75
2UEW 100Ts
○ Calculated output power (forward converter mode): 242W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
10 4
Temperature rise of hot spot ΔT (°C)
10 3
NI limit (AT)
10 2
20%
40%
AL-value(nH/N2)
10 3
Center pole gap
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=30282×AL–1.0424
NI40%=27182×AL–1.0085
10 2
10 4
10 3
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=123.27×lg –0.7121
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level:0.5mA
• Ambient temperature:25°C
10
0
0
0.5
1
1.5
Total loss Pm (W)
2
2.5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(49/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47ETD34-Z
17.3±0.2
34.2±0.8
ø10.8±0.3
26.3±0.7
SHAPES AND DIMENSIONS
12.1±0.3 5.2
10.88±0.38
34.6±0.4
Dimensions in mm
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
2
(mm )
(mm2)
Ve
(mm3)
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
(W)max.
100kHz
200mT
100°C
0.810
78.6
Coil:ø0.35
97.1
7630
91.6
86.6
188
40
2780±25% 4190 min.
2.52
2UEW 100Ts
○ Calculated output power (forward converter mode): 321W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
100
10 4
Temperature rise of hot spot ΔT (°C)
10 3
Temperature rise vs. Total loss
(Typ.)
NI limit (AT)
10 2
40%
20%
AL-value(nH/N2)
10 3
Center pole gap
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=51124×AL–1.085
NI40%=40021×AL–1.0275
10 2
10 4
10 3
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=154.97×lg –0.7135
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level: 0.5mA
• Ambient temperature: 25°C
10
0
0
1
2
3
Total loss Pm (W)
4
5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(50/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47ETD39-Z
19.8±0.2
39.1±0.9
ø12.5±0.3
30.1±0.8
SHAPES AND DIMENSIONS
14.6±0.4 5.2
12.58±0.38
39.6±0.4
Dimensions in mm
Based on JIS FEI 12.5.
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
(W)max.
100kHz
200mT
100°C
0.737
92.1
Coil:ø0.35
125
11500
123
117
257
60
3150±25% 4600 min.
3.96
2UEW 100Ts
○ Calculated output power (forward converter mode): 450W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
10 4
Temperature rise of hot spot ΔT (°C)
10 3
10 3
NI limit (AT)
40%
20%
AL-value(nH/N2)
Center pole gap
10 2
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=71172×AL–1.0921
NI40%=52255×AL–1.0227
10 2
10 4
10 3
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=206.47×lg –0.7181
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level:0.5mA
• Ambient temperature: 25°C
10
0
0
1
2
3
Total loss Pm (W)
4
5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(51/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47ETD44-Z
22.3±0.2
16.5±0.4 5.8
44.0±1.0
ø14.8±0.4
33.3±0.8
SHAPES AND DIMENSIONS
14.9±0.5
44.6±0.4
Dimensions in mm
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
2
(mm )
(mm2)
Ve
(mm3)
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
(W)max.
100kHz
200mT
100°C
0.589
103
Coil:ø0.35
175
18000
172
163
305
94
4000±25% 5760 min.
6.2
2UEW 100Ts
○ Calculated output power (forward converter mode): 581W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
10 4
10 2
NI limit (AT)
20%
40%
AL-value(nH/N2)
10 3
Temperature rise of hot spot ΔT (°C)
10 3
Center pole gap
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=122017×AL–1.132
NI40%=110680×AL–1.1034
10 3
10 2
10 4
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=273.97×lg –0.7415
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level: 0.5mA
• Ambient temperature: 25°C
10
0
0
1
2
3
Total loss Pm (W)
4
5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm
(52/52)
F E R R I T E S
Mn-Zn E series Part No.: PC47ETD49-Z
24.7±0.2
18.1±0.4 6.6
48.7±1.1
ø16.3±0.4
37.0±0.9
SHAPES AND DIMENSIONS
16.4±0.5
49.4±0.4
Dimensions in mm
Based on JIS FEI 12.5.
Effective parameter
Core
factor
Effective
magnetic path
length
ℓe
(mm)
C1
(mm–1)
Electrical characteristics
Effective
cross-sectional
area
Ae
(mm2)
Effective
core volume
Cross-sectional Minimum
center pole area cross-sectional
center pole are
Acp
Acp min.
(mm2)
(mm2)
Ve
(mm3)
Cross-sectional Weigh
winding area of
core
Acw
(mm2)
(g/set)
AL-value (nH/N2)
1kHz
0.5mA
Core loss
100kHz
200mT
(W)max.
100kHz
200mT
100°C
0.535
114
Coil:ø0.35
213
24300
209
199
375
124
4440±25% 6340 min.
10.25
2UEW 100Ts
○ Calculated output power (forward converter mode): 692W (100kHz)
NI limit vs. AL-value(Typ.)
AL-value vs. Air gap length(Typ.)
Temperature rise vs. Total loss
(Typ.)
100
10 4
10 3
Center pole gap
20% 40%
NI limit (AT)
AL-value(nH/N2)
10 2
Temperature rise of hot spot ΔT (°C)
10 3
10 2
101
10 1
50
Temp: 100°C
100 1
10
NI20%=138958×AL–1.1099
NI40%=141960×AL–1.1053
10 3
10 2
10 4
A L-value (nH/N 2)
The 20% and 40% graph shows when a
20% and 40% drop from the initial ALvalue has been made due to the DC
superimposition.
10 0
0.01
AL=319.26×lg –0.7208
0.10
1
Air gap length (mm)
Measuring conditions
• Coil:ø0.35 2UEW 100Ts
• Frequency:1kHz
• Current level:0.5mA
• Ambient temperature:25°C
10
0
0
1
2
3
Total loss Pm (W)
4
5
Measuring conditions
• Room space: approx. 400x300x 300cm
• Ambient temperature:25°C
• Humidity: 45(%)RH.
Measuring point
Core
Coil
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20141203 / ferrite_mz_sw_e_en.fm