ZRO0818C2LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Radio Modem • Test Equipment £(f) (dBc/Hz) 14118 Stowe Drive, Suite B Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] • Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 805 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -126 Harmonic Suppression (2nd) -35 Tuning Voltage 0 Max Units 831 MHz dBc/Hz -25 dBc 11 Vdc MHz/V 3 Tuning Sensitivity (avg.) 7 dBm 100 pF Pushing .2 MHz/V Pulling (12 dB Return Loss, Any Phase) 1.5 MHz 85 °C Max Units Power Output 3 Load Impedance 5 50 Input Capacitance Operating Temperature Range -40 Package Style Power Supply Requirements ZMX-14-SM Min Typ Supply Voltage (Vcc, nom.) 10 Supply Current (Icc) 23 Vdc 28 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module ZRO0818C2LF Rev A1 Tuning Curve, typ. 835 FREQUENCY (MHz) 830 825 85 °C 25 °C 820 815 -40 °C 810 805 800 0 1 2 3 4 5 6 7 8 9 10 11 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint 9 RECOMMENDED FOOTPRINT 8 SEVERAL HOLES OF o 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 7 6 5 4 3 0.030 MIN. CUTBACK FROM LIVE PADS 2 1 803 807 810 812 815 817 820 822 825 828 830 833 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions GOLD PLATED PADS SOLDER MASK PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B