Chip Resistors Selection Charts

PRODUCT SELECTION GUIDE
2014
SMD RESISTORS + MLCC
SMD CERAMIC EMI FILTER CAPACITORS - X2Y ®
WIRELESS COMPONENTS
www.yageo.com
MULTILAYER CHIP VARISTORS
Preface
Part numbering system and ordering
You can order components from this catalogue in two ways. Both ways give logistic and packing information.
• Clear text ordering code
This unique number is an easily-readable code.
- 15 digits code (PHYCOMP CTC )
- 14 to 17 digits code (GLOBAL PART NUMBER for both Yageo and Phycomp branded products)
• 12 digits ordering code
This unique 12NC number forms the basis of the Phycomp logistic system.
You will find details for ordering in the "Ordering" section next to each selection chart.
Minimum shipment quantities, prices and delivering details can be obtained from the Yageo sales organization in
your country or from one of our franchised distributors.
Case size codes
Throughout this catalogue, inch-based codes are used
for the component sizes. According to IEC 60384-10,
amendment 2 of September 2000 for MLCCs, and IEC
60115-8, amendment 1 of July 2000 for R-chip. Values
for length and width should be in millimeters rather than
in inches. To distinguish between inch-based codes and
metric-based codes, metric-based codes will temporarily
have the suffix ‘’M’’. The table right next shows the
relation between inch-based case sizes versus the
recommended metric case size designators. Please note
that HF products use metric case size only.
Case size designation and cross-reference
Inch-based
Metric
Inch-based
Metric
Inch-based
Metric
0050
0201M
0606
1616M
1224
3250M
0075
03015M
0612
1632M
1225
3264M
01005
0402M
0616
1640M
1812
4532M
0201
0603M
0805
2012M
2007
5320M
0202
0605M
0815
2037M
2010
5025M
0402
1005M
0830
2075M
2220
5750M
0404
1010M
1008
2520M
2512
6432M
0408
1020M
1206
3216M
3014
7836M
0508
1220M
1210
3225M
4527
11070M
0603
1608M
1218
3245M
Contact us
Founded in 1977, the Yageo Corporation has become a world-class provider of passive-component services with
capabilities on a global scale, including production and sales facilities in Asia, Europe and America. The corporation
is uniquely positioned to provide one-stop-shopping, offering its complete product portfolio of resistors, capacitors
and inductors in both commodity and specialty versions, plus design-in capability, distribution, e-commerce
connection and logistics. Yageo markets its products under the product brand names Yageo, Phycomp and Vitrohm.
All products can be obtained from our Yageo sales offices, of which contact details can be found on the backcover of
this catalogue. For most up-to-date information, as well as contact details of our franchise distributors, please refer to
our website: www.yageo.com
3
Table of Contents
Chip Resistors General Information
8
Specification overview
13
Ordering information - North America
15
IEC publication 63, SPQ, last digit of 12NC
16
Chip Resistors Selection Charts
4
8
Ordering information - Global part number
17
RC - Thick film chip resistors
17
RC - Thick film general purpose chip resistors, 01005 to 2512
17
RC - Thick film high ohmic chip resistors
22
RC - Thick film high ohmic chip resistors, 0805 / 1206
22
RE - Thick film precision grade chip resistors
24
RE - Thick film precision grade chip resistors, 0402 to 1206
24
RT - Thin film high precision high stability chip resistors
27
RT - Thin film high precision high stability chip resistors, 0402 to 2512
27
YC/TC - Thick film array / network chip resistors
31
YC/TC - Thick film array / network chip resistors 31
YC/TC - Arrays, convex / concave / flat 33
YC - Networks, T-type / L-type
34
RL - Thick film low ohmic chip resistors
35
RL - Thick film low ohmic chip resistors, 0402 to 2512
35
RL - Thick film low ohmic, high power chip resistors, 0402 / 1206
39
PT - Thick film low ohmic low T. C. R. chip resistors
40
PT - Thick film low ohmic low T. C. R. chip resistors, 0402 to 2512
40
PT - Thick film low ohmic low T. C. R. chip resistors, wide termination
43
PT - Thick film low ohmic low T. C. R. chip resistors, wide termination, 0815
43
PR/PA/PF/PH/PE - Current sensors - low T. C. R. chip resistors
46
PR/PA/PF/PH/PE - Current sensors - low T. C. R. chip resistors, 0402 to 4527
46
PE/PF - Current sensors - low T. C. R. chip resistors, wide termination
51
PE/PF - Current sensors - low T. C. R. chip resistors, wide termination, 0612 to 0830
51
PS - Current sensors - low T. C. R. chip resistors, 4 termination
54
PS - Current sensors - low T. C. R. chip resistors, 4 termination, 0306 to 1225
54
AR - NiAu termination chip resistors
57
AR - NiAu termination chip resistors, 0402 to 1206
57
SR - Surge chip resistors
60
SR - Surge chip resistors, 0402 to 2512
60
RV - High voltage chip resistors
63
RV - High voltage chip resistors, 0603 to 2512
63
TR - Trimmable chip resistors
66
TR - Trimmable chip resistors, 0402 to 1206
66
AF - Sulfur resistant chip resistors
69
AF - Sulfur resistant chip resistors, 0201 to 2512
69
AF - Sulfur resistant chip resistors, Arrays
72
AC - Automotive grade chip resistors
75
AC - Automotive grade chip resistors, 0402 to 2512
75
AT - RF attenuator chip resistors
78
AT - RF attenuator chip resistors, 0404
78
Table of Contents
Chip Resistors Engineering Design Kits
81
Engineering design kits
81
Engineering design books
81
MLCC General Information
84
Specification overview
84
Ordering information - Global part number
85
Thickness classes and packing quantities for all series
87
MLCC Selection Charts
88
NP0 - General purpose
88
NP0 - General purpose 16 to 50V, 01005 to 0603
89
NP0 - General purpose 16 to 50V, 0805 to 1812
91
NP0 - Medium & High voltage
93
NP0 - Medium voltage, 0402 to 0805
94
NP0 - Medium voltage, 1206 / 1210
95
NP0 - High voltage, 0805 to 1210
96
NP0 - High voltage, 1808 / 1812
97
NP0 - High frequency
98
NP0 - High frequency, 01005 to 0805
98
X7R - General purpose & High capacitance
100
X7R - General purpose & High capacitance, 01005 to 0402
101
X7R - General purpose & High capacitance, 0603 / 0805
102
X7R - General purpose & High capacitance, 1206 to 2220
103
X7R - Medium & High voltage
104
X7R - Medium voltage & High voltage, 0402 to 0805
105
X7R - Medium voltage & High voltage, 1206 / 1210
106
X7R - Medium voltage & High voltage, 1808 / 1812
107
X7R/ X5R - Low inductance
108
X7R/ X5R - Low inductance, 0306 to 0612
108
X7R - Soft termination
110
X7R - Soft termination, 0603 / 0805
111
X7R - Soft termination, 1206
112
X7R - Soft termination, 1210 / 1812
113
X5R - General purpose & High capacitance
114
X5R - General purpose & High capacitance, 01005 to 0402
115
X5R - General purpose & High capacitance, 0603 / 0805
116
X5R - High capacitance & High capacitance, 1206
117
X5R - High capacitance, 1210 / 1812
118
Y5V - General purpose & High capacitance
119
Y5V - General purpose & High capacitance 6.3 to 25V, 0201 / 0402
120
Y5V - General purpose & High capacitance 6.3 to 25V, 0603 / 0805
121
Y5V - General purpose & High capacitance 6.3 to 25V, 1206 / 1210
122
Y5V - General purpose & High capacitance 50V, 0402 to 1206
123
Automotive grade MLCCs
124
NP0 - Automotive grade, 0402 to 0805
125
NP0 - Automotive grade, 1206 / 1210
126
X7R - Automotive grade, 0402 / 0603
127
X7R - Automotive grade, 0805
128
5
Table of Contents
X7R - Automotive grade, 1206
129
X7R - Automotive grade, 1210
130
Safety certification MLCCs
131
NPO - High voltage SC type, 1808 / 1812
131
X7R - High voltage SC type, 1808 / 1812
132
Arrays
133
NPO / X7R / Y5V- 4C Arrays, 0508 / 0612
133
NPO - 4C Arrays, 0508 / 0612
135
X7R - 4C Arrays, 0508 / 1612
136
Y5V - 4C Arrays, 0612
137
MLCC Engineering Design Kits
138
Sample kits for 0201 / 0402
138
Sample kits for 0603 / 0805
139
Sample kits for 1206
140
Sample kits for high capacitance series
141
High voltage sample kits for general applications
142
Sample kits for high frequency series
143
X2Y® Product Selection Charts
146
SMD ceramic EMI filter capacitors X2Y series
146
Ordering information
147
®
Wireless Components Selection Charts
152
Introduction
152
Key features of Wireless Components
153
Product Information
154
Antenna - 2.4 GHz
154
Antenna - 2.4 / 5 GHz
155
Antenna - Cellular WWAN / Short Range
156
Antenna - GPS
157
Antenna - GPS / Glonass / Active Antenna
159
Antenna - Others
160
Filters
161
Ordering Information
164
Wireless Components Engineering Design Kits
166
Sample Kit
MLV Product Selection Charts
6
166
168
Specification for 0402
169
Specification for 0603
170
Specification for 0805
171
Specification for 1206
172
Ordering information for 0402 to 1206
173
SURFACE-MOUNT CHIP RESISTORS
Chip Resistors General Information
Specification overview
Size
Power Max.
Operating
rating voltage Temp. range
Resistance
range
Tolerance
RC0100xR-07xxxxL
01005
1/32W
15V
1Ω ≤ R ≤ 1MΩ
Jumper < 50mΩ
±1%
±5%
1Ω ≤ R ≤ 10Ω -200~600 ppm/°C
10Ω ≤ R ≤ 1MΩ ±250 ppm/°C
RC0201xR-07xxxxL
0201
1/20W
25V
1Ω ≤ R ≤ 10MΩ
Jumper < 50mΩ
Max./Min.: 1MΩ/10Ω ±0.5%
Max.: 10MΩ ±1%,±5%
1Ω ≤ R ≤ 10Ω -100/+350 ppm/°C
10Ω < R ≤ 10MΩ ±200 ppm/°C
RC0402xR-07xxxxL
RC0603xR-07xxxxL
RC0805xR-07xxxxL
RC1206xR-07xxxxL
RC1210xR-07xxxxL
0402
0603
0805
1206
1210
1/16W
1/10W
1/8W
1/4W
1/2W
50V
50V
150V
200V
200V
1Ω ≤ R ≤ 22MΩ
Jumper < 50mΩ
1218
1W
200V
1Ω ≤ R ≤ 1MΩ
Jumper < 50mΩ
RC2010xK-07xxxxL
RC2512xK-07xxxxL
2010
2512
3/4W
1W
200V
200V
1Ω ≤ R ≤ 22MΩ
Jumper < 50mΩ
RC0603xR-7WxxxxL
0603
1/5W
50V
1Ω ≤ R ≤ 1MΩ
RC0805xR-7WxxxxL
RC1206xR-7WxxxxL
RC2512xK-7WxxxxL
RC0805xR-07xxxxL
RC1206xR-07xxxxL
RE0402xRE07xxxxL
RE0603xRE07xxxxL
RE0805xRE07xxxxL
RE1206xRE07xxxxL
RT0402xRx07xxxxL
RT0603xRx07xxxxL
RT0805xRx07xxxxL
RT1206xRx07xxxxL
RT1210xRx07xxxxL
RT2010xKx07xxxxL
RT2512xKx07xxxxL
0805
1206
2512
0805
1206
0402
0603
0805
1206
0402
0603
0805
1206
1210
2010
2512
1/4W
1/2W
2W
1/8W
1/4W
1/16W
1/10W
1/8W
1/4W
1/16W
1/10W
1/8W
1/4W
1/4W
1/2W
3/4W
150V
200V
200V
150V
200V
50V
50V
150V
200V
50V
75V
150V
1Ω ≤ R ≤ 1MΩ
YC102-xR-07xxxxL
2*0201
1/32W
15V
YC104-xR-07xxxxL
4*0201
1/32W
12.5V
Global part number
Series
-55°C to 125°C
RC1218xK-07xxxxL
RC
RE
RT
200V
-55°C to 155°C
-55°C to 155°C
1Ω ≤ R ≤ 150Ω
24MΩ ≤ R ≤ 100MΩ
24MΩ ≤ R ≤ 100MΩ
10Ω ≤ R ≤ 1MΩ
10Ω ≤ R ≤ 1MΩ
-55°C to 155°C
10Ω ≤ R ≤ 1MΩ
10Ω ≤ R ≤ 1MΩ
10Ω ≤ R ≤ 121KΩ
5.1Ω ≤ R ≤ 681KΩ
-55°C to 155°C
5.1Ω ≤ R ≤ 1.5MΩ
5.1Ω ≤ R ≤ 1.5MΩ
5.1Ω ≤ R ≤ 1MΩ
-55°C to 125°C
10Ω ≤ R ≤ 1MΩ
10Ω ≤ R ≤ 1MΩ
-55°C to 125°C
1Ω ≤ R ≤ 1MΩ
Jumper < 50mΩ
±200 ppm/°C
±5%, ±10%, ±20%
±300 ppm/°C
±0.1%
±0.5%
±1%
±50 ppm/°C
±0.05%
±0.1%
±0.25%
±0.5%
±1%
±10 ppm/°C
±15 ppm/°C
±25 ppm/°C
±50 ppm/°C
±1%
±5%
1/16W
50V
YC124-xR-07xxxxL
4*0402
1/16W
25V
-55°C to 155°C
1Ω ≤ R ≤ 1MΩ
Jumper < 50mΩ
±1%
±5%
YC162-xR-07xxxxL
2*0603
1/16W
50V
-55°C to 125°C
10Ω ≤ R ≤ 1MΩ
Jumper < 50mΩ
±5%
YC164-xR-07xxxxL
4*0603
1/16W
50V
YC248-xR-07xxxxL
8*0602
1/16W
50V
YC324-xK-07xxxxL
TC122-xR-07xxxxL
!TC122HxR-07xxxxL
! TC122MxR-07xxxxL
TC124-xR-07xxxxL
!TC124HxR-07xxxxL
!TC124MxR-07xxxxL
TC164-xR-07xxxxL
4*1206
1/8W
200V
2*0402
1/16W
50V
1Ω ≤ R ≤ 1MΩ
Jumper < 50mΩ
4*0402
1/16W
50V
4*0603
1/16W
50V
Note: " ! " is the symbol for new product
±1%
±5%
1Ω ≤ R < 10Ω ±250 ppm/°C
10Ω ≤ R ≤ 1MΩ ±200 ppm/°C
±200 ppm/°C
10Ω ≤ R ≤ 1MΩ
-55°C to 125°C
TC
10Ω ≤ R ≤ 1MΩ
Jumper < 50mΩ
±200 ppm/°C
Max./Min.: 1MΩ/10Ω ±1%
Max.: 1MΩ ±5%
2*0402
-55°C to 155°C
1Ω ≤ R ≤ 10Ω ±200 ppm/°C
10Ω < R ≤ 10MΩ ±100 ppm/°C
10MΩ < R ≤ 22MΩ ±200 ppm/°C
±1%
±5%
YC122-xR-07xxxxL
YC
8
10Ω ≤ R ≤ 1MΩ
Jumper < 50mΩ
Max./Min.: 1MΩ/10Ω ±0.1%
±0.5%
Max.: 10MΩ ±1%
Max.: 22MΩ ±5%
T. C. R.
10Ω ≤ R ≤ 1MΩ
Jumper < 50mΩ
1Ω ≤ R ≤ 1MΩ
±1%
±5%
±200 ppm/°C
Chip Resistors General Information
Specification overview
Global part number
Series
YC158TJR-07xxxxL
YC158
Size
Power
rating
Max.
voltage
1/16W
25V
10P8R
(0612)
10P8R
(1225)
1/16W
RL0402xR-07xxxxL
0402
1/16W
RL0603xR-07xxxxL
0603
1/10W
RL0805xR-07xxxxL
0805
1/8W
RL1206xR-07xxxxL
1206
1/4W
1210
1/2W
YC358xJK-07xxxxL
YC358
RL1210xR-07xxxxL
RL1218xK-07xxxxL
1218
1W
RL2010xK-07xxxxL
2010
3/4W
RL2512xK-07xxxxL
2512
1W
RL0805xR-7WxxxxL
0805
1/4W
RL1206xR-7WxxxxL
1206
1/2W
PT0402xR-07xxxxL
0402
1/16W
PT0603xR-07xxxxL
0603
1/10W
PT0805xR-07xxxxL
0805
1/8W
PT1206xR-07xxxxL
1206
1/4W
PT2010xK-07xxxxL
2010
3/4W PT2512xK-07xxxxL
2512
1W
0402
1/8W
PT0402xR-7WxxxxL
Resistance
range
PT
Tolerance
10Ω ≤ R ≤ 100KΩ
-55°C to 155°C
RL
Operating
Temp. range
50V
T. C. R.
±200 ppm/°C
±5%
10Ω ≤ R ≤ 330KΩ
±200 ppm/°C
50mΩ ≤ R < 1Ω
Jumper < 20mΩ
10mΩ ≤ R < 1Ω
Jumper < 20mΩ
(PxR)^1/2 -55°C to 125°C
±1%
±2%
±5%
See page 36,
table “T. C. R. - RL series“
±1%
±2%
±5%
See page 41,
table "T.C.R. - PT series"
±1%
±2%
±5%
±100 ppm/°C
10mΩ ≤ R < 1Ω
10mΩ ≤ R < 1Ω
50mΩ ≤ R < 1Ω
Jumper < 10mΩ
50mΩ ≤ R < 1Ω
Jumper < 8mΩ
50mΩ ≤ R < 1Ω
Jumper < 5mΩ
100mΩ ≤ R < 1Ω
(PxR)^1/2 -55°C to 155°C
PT0603xR-7WxxxxL
0603
1/5W PT0805xR-7WxxxxL
0805
1/4W
PT1206xR-7WxxxxL
1206
1/2W
PT2010xK-7WxxxxL
2010
1W
PT2512xK-7WxxxxL
2512
2W
PT0402xR-7TxxxxL
0402
1/6W
68mΩ
PT0603xR-7TxxxxL
0603
1/3W
50mΩ ≤ R ≤ 68mΩ
50mΩ ≤ R < 1Ω
100mΩ ≤ R < 1Ω
PT0815xK-07xxxxL
PT0815xK-7WxxxxL
PT
0815
(Wide)
1/2W
1W
(PxR)^1/2 -55°C to 155°C
25mΩ ≤ R ≤ 50mΩ
Note: “ ! “ is the symbol for new product
9
Chip Resistors General Information
Specification overview
Global part number
Series
Size
PR1206xKx7Wxxxxxx
1206
PR1206xKx47xxxxxx
2010
PR
1/2W
1W
2512
1W
PR2512DKx7Wxxxxxx
2W
PA2512xKF07xxxxL
2512
!PF0402xRx07xxxxxx
2W
(PxR)^1/2 -55°C to 170°C
0.5mΩ ≤ R ≤ 5mΩ
0.5mΩ ≤ R ≤ 10mΩ
(PxR)^1/2 -55°C to 155°C
1/8W
1/4W
PF0603xRx07xxxxxx
1/10W
PF0603xRx7Wxxxxxx
1/5W
0603
PF0603xRx7Txxxxxx
±1%
±2%
±5%
7mΩ ≤ R ≤ 75mΩ
±0.5%
1mΩ ≤ R ≤ 10mΩ
±1%
±5%
PF0603xRx47xxxxxx
2/5W
1/2W
PF0805xRx07xxxxxx
1/8W
PF0805xRx7Wxxxxxx
0805
PF0805xRx7Txxxxxx
-55°C to 155°C 10mΩ ≤ R ≤ 50mΩ
0.5mΩ ≤ R ≤ 2mΩ ±200 ppm/°C
3mΩ ≤ R ≤ 5mΩ ±100 ppm/°C
±50 ppm/°C
±100 ppm/°C
1/4W
3mΩ ≤ R ≤ 100mΩ
1/3W
±1%
±2%
±5%
1/2W
PF0805xRx47xxxxxx
1/4W
PF
1206
PF1206xxx7Wxxxxxx
1/2W
1W
PF1206xxx47xxxxxx
PF2010xKx07xxxxxx
2010
PF2010xKx7Wxxxxxx
1/2W
1W
±100 ppm/°C
5mΩ ≤ R ≤ 100mΩ
1/3W
PF0603xRx57xxxxxx
(PxR)^1/2
-55°C to 170°C
3mΩ ≤ R ≤ 100mΩ
±50 ppm/°C
±75 ppm/°C
±100 ppm/°C
5mΩ ≤ R ≤ 100mΩ
1W
PF2512xKx07xxxxxx
2512
PF2512xKx7Wxxxxxx
2W
PF2512xKx7Txxxxxx
3W
PF4527xKx07xxxxxx
2W
PF4527xKx7Wxxxxxx
4527
PF4527xKx7Txxxxxx
3W
6mΩ ≤ R ≤ 100mΩ
5mΩ ≤ R ≤ 1Ω
5W
PF4527xKx7Wxxxxxx
4527
PF4527xKx7Txxxxxx
PF0612xKx07xxxxxx
0612
PF0612xKx7Wxxxxxx
PF0830xKx7Wxxxxxx
±50 ppm/°C
1/16W
0402
!PF0402xRx47xxxxxx
PF0830xKx07xxxxxx
±1%
±2%
±5%
3W
!PF0402xRx7Wxxxxxx
PF0815xKx7Wxxxxxx
T. C. R.
1W
PA
PA2512xKF7TxxxxL
PF0815xKx07xxxxxx
Tolerance
1mΩ ≤ R < 100mΩ
3W
PR2512DKx07xxxxxx
PF1206xxx07xxxxxx
Resistance
range
1mΩ ≤ R ≤ 6mΩ
2W
PR2512xKx7Txxxxxx
10
1/2W
1W
PR2512xKx7Wxxxxxx
PA2512xKF7WxxxxL
Operating
Temp. range
1W
PR2010xKx07xxxxxx
PR2512xKx07xxxxxx
Max.
voltage
1/4W
PR1206xKx07xxxxxx
PR2010xKx7Wxxxxxx
Power
rating
PF
(Wide)
0815
0830
3W
5W
1W
2W
1/2W
1W
2W
3W
5mΩ ≤ R ≤ 1Ω
±1%
±2%
±5%
±50 ppm/°C
±75 ppm/°C
±100 ppm/°C
±1%
±2%
±5%
±75 ppm/°C
±100 ppm/°C
1mΩ ≤ R ≤ 300mΩ
(PxR)^1/2 -55°C to 170°C 1mΩ ≤ R ≤ 100mΩ
1mΩ ≤ R ≤ 100mΩ
Chip Resistors General Information
Specification overview
Global part number
Series
!PE0612xKx07xxxxxx
!PE0815xKx7Wxxxxxx
Power
rating
PE
(Wide)
0815
1/2W
1W
2W
0805
4/5W
PH1206xRx07xxxxxx
1206
1W
!PE0402xRx07xxxxxx
Tolerance
T. C. R.
±1%
±2%
±5%
±75 ppm/°C
±100 ppm/°C
±1%
±2%
±5%
±75 ppm/°C
1mΩ ≤ R ≤ 100mΩ
3W
PH
(PxR)^1/2 -55°C to 155°C
4mΩ ≤ R ≤ 50mΩ
1/16W
!PE0402xRx7Wxxxxxx
0402
1/8W
!PE0402xRx47xxxxxx
1/4W
PE0603xRx07xxxxxx
1/10W
PE0603xRx7Wxxxxxx
1/5W
0603
PE0603xRx7Txxxxxx
2/5W
PE0603xRx57xxxxxx
1/2W
PE0805xRx07xxxxxx
1/8W
PE0805xRx7Wxxxxxx
0805
PE0805xRx7Txxxxxx
3mΩ ≤ R ≤ 100mΩ
1/3W
1206
PE1206xxx7Wxxxxxx
±1%
±2%
±5%
(PxR)^1/2
1/4W
PE1206xxx07xxxxxx
±100 ppm/°C
5mΩ ≤ R ≤ 100mΩ
1/4W
1/2W
PE
-55°C to 155°C 10mΩ ≤ R ≤ 50mΩ
1/3W
PE0603xRx47xxxxxx
-55°C to 170°C
1/2W
3mΩ ≤ R ≤ 100mΩ
±50 ppm/°C
±75 ppm/°C
±100 ppm/°C
1W
PE1206xxx47xxxxxx
!PE2010xKx07xxxxxx
2010
!PE2010xKx7Wxxxxxx
1/2W
5mΩ ≤ R ≤ 100mΩ
1W
!PE2512xKx07xxxxxx
1W
2512
PE2512xKx7Wxxxxxx
3W
!PE4527xKx07xxxxxx
2W
!PE4527xKx7Wxxxxxx
4527
!PE4527xKx7Txxxxxx
6mΩ ≤ R ≤ 100mΩ
2W
!PE2512xKx7Txxxxxx
5mΩ ≤ R < 1Ω
3W
5W
!PS0306xRx07xxxxxx
0306
!PS0306xRx7Wxxxxxx
!PS0508xRx07xxxxxx
!PS0508xRx7Txxxxxx
(PxR)^1/2 -55°C to 170°C 1mΩ ≤ R ≤ 100mΩ
0830
PH0805xRx07xxxxxx
Resistance
range
1mΩ ≤ R ≤ 300mΩ
2W
!PE0830xKx7Wxxxxxx
!PS0508xRx7Wxxxxxx
Operating
Temp. range
1W
!PE0830xKx07xxxxxx
PE0805xRx47xxxxxx
Max.
voltage
0612
!PE0612xKx7Wxxxxxx
!PE0815xKx07xxxxxx
Size
1/8W
-55°C to 155°C
1/4W
1/8W
PS
(4 Terminal)
0508
1/4W
1/2W
±1%
±5%
(PxR)^1/2
-55°C to 170°C
!PS0612xKx07xxxxxx
0612
!PS1225xKx07xxxxxx
1225
Note: “ ! “ is the symbol for new product
±75 ppm/°C
±100 ppm/°C
10mΩ ≤ R ≤ 50mΩ
1W
0.5mΩ, 0.75mΩ
1mΩ ≤ R ≤ 5mΩ
0.5mΩ, 0.75mΩ ±700 ppm/°C
1mΩ ≤ R ≤ 2mΩ ±400 ppm/°C
3mΩ ≤ R ≤ 5mΩ ±150 ppm/°C
3W
4mΩ ≤ R ≤ 50mΩ
±75 ppm/°C
±100 ppm/°C
11
Chip Resistors General Information
Specification overview
Global part number
Series
AR0402xR-07xxxxL
AR0603xR-07xxxxL
AR0805xR-07xxxxL
AR
AR1206xR-07xxxxL
!SR0402xR-07xxxxL
!SR0402xR-7WxxxxL
!SR0603xR-07xxxxL
SR0805xR-07xxxxL
SR
SR1206xR-07xxxxL
0402
0603
1/16W
50V
1/10W
50V
0805
1/8W
150V
1206
1/4W
200V
0402
1/16W
1/8W
50V
0805
!SR1206xR-7WxxxxL
1206
SR1218xK-07xxxxL
SR2010xK-07xxxxL
SR2512xK-07xxxxL
!RV0603xR-07xxxxL
RV0805xR-07xxxxL
1/10W
1/5W
1/8W
1/4W
1/4W
Operating
Temp. range
Resistance
range
Tolerance
-55°C to 155°C
1Ω ≤ R ≤ 10MΩ
Jumper < 50mΩ
±1%
±5%
-55°C to 155°C
1Ω ≤ R ≤ 100KΩ
±5%
±10%
±20%
10KΩ ≤ R ≤ 1MΩ
100KΩ ≤ R ≤ 10MΩ
±1%
±5%
150V
200V
1218
1W
200V
2010
3/4W
200V
2512
0603
0805
1W
1/10W
1/8W
200V
350V
400V
1206
1/4W
2512
0402
0603
0805
1206
1W
1/16W
1/16W
1/8W
1/4W
150V
200V
-55°C to 155°C
!AF0201xR-07xxxxL
0201
1/20W
25V
-55°C to 125°C
AF0402xRx-07xxxxL
AF0603xRx-07xxxxL
AF0805xRx-07xxxxL
AF1206xRx-07xxxxL
!AF1210xRx-07xxxxL
!AF1218xKx-07xxxxL
!AF2010xKx-07xxxxL
!AF2512xKx-07xxxxL
!AF122-xR-07xxxxL
!AF124-xR-07xxxxL
AC0402xR-07xxxxL
AC0603xR-07xxxxL
AC0805xR-07xxxxL
AC1206xR-07xxxxL
AC1210xR-07xxxxL
0402
0603
0805
1206
1210
1218
2010
2512
2*0402
4*0402
0402
0603
0805
1206
1210
1/16W
1/10W
1/8W
1/4W
1/2W
1W
3/4W
1W
1/16W
1/16W
1/16W
1/10W
1/8W
1/4W
1/2W
50V
50V
150V
200V
200V
200V
200V
200V
50V
25V
50V
50V
150V
200V
200V
AC1218xK-07xxxxL
1218
1W
200V
AC2010xK-07xxxxL
2010
3/4W
200V
AC2512xK-07xxxxL
2512
1W
200V
0404
40mW
50V
RV2512JK-07xxxxL
TR0402xR-07xxxxL
TR0603xR-07xxxxL
TR0805xR-07xxxxL
TR1206xR-07xxxxL
ATV321xR-07xxxxL
RV
TR
AC
AT
Note: " ! " is the symbol for new product
T. C. R.
1Ω ≤ R ≤ 10Ω ±200 ppm/°C
10Ω < R ≤ 10MΩ ±100 ppm/°C
50V
1/2W
RV1206xR-07xxxxL
12
Max.
voltage
0603
!SR0603xR-7WxxxxL
!SR0805xR-7WxxxxL
Power
rating
Size
-55°C to 155°C
500V
50V
Max.: 10MΩ ±1%
Max.: 27MΩ ±5%
4.7MΩ ≤ R ≤ 16MΩ
±5%
100KΩ ≤ R ≤ 27MΩ
-55°C to 125°C
±200 ppm/°C
±200 ppm/°C
1Ω ≤ R ≤ 10MΩ
+0/-10%
+0/-20%
+0/-30%
1Ω ≤ R ≤ 10Ω ±200 ppm/°C
10Ω < R ≤ 1MΩ ±100 ppm/°C
1MΩ < R ≤ 10MΩ ±200 ppm/°C
1Ω ≤ R ≤ 10MΩ
Jumper<50mΩ
±1%
±5%
1Ω ≤ R ≤ 22MΩ
Jumper<50mΩ
Max:10MΩ ±1%
Max:22MΩ ±5%
1Ω ≤ R ≤ 10Ω ±200 ppm/°C
10Ω < R ≤ 10MΩ ±100 ppm/°C
10MΩ < R ≤ 22MΩ ±200 ppm/°C
1Ω ≤ R ≤ 10MΩ
Jumper<50mΩ
±1%
±5%
1Ω ≤ R ≤ 10Ω ±200 ppm/°C
10Ω < R ≤ 10MΩ ±100 ppm/°C
1Ω ≤ R ≤ 1MΩ
Jumper < 50mΩ
±1%
±5%
1Ω ≤ R ≤ 10Ω ±250 ppm/°C
10Ω < R ≤ 1MΩ ±200 ppm/°C
±1%
±5%
1Ω ≤ R ≤ 10Ω ±200 ppm/°C
10Ω < R ≤ 10MΩ ±100 ppm/°C
1Ω ≤ R ≤ 10Ω -100/+350 ppm/°C
10Ω < R ≤ 10MΩ ±200 ppm/°C
-55°C to 155°C
-55°C to 125°C
-55°C to 155°C
1Ω ≤ R ≤ 10MΩ
Jumper < 50mΩ
-55°C to 155°C
1Ω ≤ R ≤ 1MΩ
Jumper < 50mΩ
1Ω ≤ R ≤ 10MΩ
Jumper < 50mΩ
-55°C to 125°C
-1dB to -20dB
±0.3dB
±0.5dB
±1.0dB
±2.0dB
---
Chip Resistors General Information
Ordering information - Global part number
Global part number - Single resistor (3)
RC
0 4 02
J R ―
7D
10R
Series name (code 1-2)
RC=Thick film general purpose
RE = Thick film precision grade
RT=Thin film high precision high stability
RL =Thick film low ohmic
PT =Thick film low ohmic low T. C. R.
PR/PA/PF/PH/PE = Current sensor - low T. C. R.
PS = Current sensor - low T.C.R, 4 termination
TR=Trimmable
SR = Surge
AR=NiAu termination
RV = High voltage
AF =Sulfur resistant
AC = Automotive grade
Size code (code 3-6)
(inch / metric)
0100 = 0.4 x 0.2
0201 = 0.6 x 0.3
0402 = 1.0 x 0.5
0603 = 1.6 x 0.8
0612 = 1.6 x 3.2
0805 = 2.0 x 1.25
0815 = 2.15 x 3.75
0830 = 2.0 x 7.5
1206 = 3.2 x 1.6
1210 = 3.2 x 2.6
1218 = 3.2 x 4.5
2010 = 5.0 x 2.5
2512 = 6.35 x 3.2
4527 = 11.0 x 7.0
Tolerance (code 7)
W = ±0.05%
B = ±0.1%
C = ±0.25%
D = ±0.5%
F = ±1%
G = ±2%
J=±5% (for RC/AR/AF/AC Jumper ordering)
K=±10% (for TR = 0/-10%)
M=±20% (for TR = 0/-20%)
N=±30% (for TR = 0/-30%)
“―” for RL/PT Jumper ordering
L
Default code (1/2) (code 17)
Resistance (code 12-16)
0R = Jumper
0U5 = 0.0005Ω
0R1 =0.1Ω
1R =1Ω
10R =10Ω
100R=100Ω
1K =1 000Ω
1M =1 000 000Ω
100M=100 000 000Ω
Taping reel (code 10-11)
07 = 7 inch Dia. reel
10 = 10 inch Dia. reel
13 = 13 inch Dia. reel
7D = 7 inch Dia. reel
2 x standard quantity
T. C. R. (code 9)
B=±10 ppm/°C (on request)
C=±15 ppm/°C (on request)
D=±25 ppm/°C
E=±50 ppm/°C
M=±75 ppm/°C
F = ±100 ppm/°C
L = ± 150 ppm/°C
G=±200 ppm/°C
P = ± 400 ppm/°C
Q = ± 700 ppm/°C
“―” = Based on spec.
(― for thick film only)
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
C = Bulk cassette
S = ESD safe reel
Note:1. All of our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. Letter L is system default code for ordering only
3. Global Part Number is the preferred clear text code for ordering Yageo and Phycomp branded products.
13
Chip Resistors General Information
Ordering information - Global part number
Global part number - Power enhancement
RL
0805
J R ―
7W
0R015
L
Series name (code 1-2)
RC=Thick film general purpose
RL=Thick film low ohmic
PT =Thick film low ohmic low T. C. R.
PR/PA/PF/PE = Current sensor - low T. C. R.
PS = Current sensor - low T.C.R, 4 termination
Default code (code 17)
L / Z = Default code
Resistance (code 12-16)
0U5 = 0.0005Ω
0R01=0.01Ω
0R1 =0.1Ω
Size code (code 3-6)
(inch / metric)
0306 = 0.8 x 1.6
0508 = 1.25 x 2.0
0612 = 1.6 x 3.2
0805 = 2.0 x 1.25
0815 = 2.15 x 3.75
1206 = 3.2 x 1.6
1225 = 3.2 x 6.35
2010 = 5.0 x 2.5
2512 = 6.35 x 3.2
4527 = 11.0 x 7.0
Taping reel (code 10-11)
07 = 7 inch Dia. reel
7W= 7 inch Dia. reel
2 x standard power type
7T = 7 inch Dia. reel
3 x standard power type
47 = 7 inch Dia. reel
4 x standard power type
57 = 7 inch Dia. reel
5 x standard power type
T. C. R. (code 9)
E = ±50 ppm/°C
M=±75 ppm/°C
F=±100 ppm/°C
G=±200 ppm/°C
“―” = Based on spec.
(― for thick film only)
Tolerance (code 7)
F = ±1%
G = ±2%
J=±5%
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Global part number - Arrays & Networks
YC 16 4 ― J R ―
Series name (code 1-2)
YC=Array & Network
(convex / flat) thick film
TC=Array (concave) thick film
AF = Sulfur resistant array (Convex) thick film
Size code (inch) (code 3-4)
10 = 0201 x 2 (0202)
0201 x 4 (0204)
12 = 0402 x 2 (0404)
0402 x 4 (0408)
15 = 10Pin/8R (0612)
16 = 0603 x 2 (0606)
0603 x 4 (0612)
24 = 0602 x 8 (0616)
32 = 1206 x 4 (1224)
35 = 10Pin/8R (1225)
Number of resistors (code 5)
2 = 2 resistors
4 = 4 resistors
8 = 8 resistors
14
Schematic (code 6)
L = L-type (for YC358)
T = T-type (for YC158/358)
M = Reverse type
H = Reverse & Half type
“―” = Based on spec.
07
10R
L
Default code (code 17)
Resistance (code 12-16)
0R =Jumper
0R1 =0.1Ω
1R =1Ω
10R =10Ω
100R=100Ω
1K =1 000Ω
1M =100 000 000
Taping reel (code 10-11)
07 = 7 inch Dia. reel
10 = 10 inch Dia. reel
13 = 13 inch Dia. reel
T.C.R. (code 9)
"―" = Based on spec.
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Tolerance (code 7)
F = ±1%
J = ±5% (for Jumper ordering)
Chip Resistors General Information
Ordering information - North America
Phycomp CTC ordering code - North America
Ordering example: 9C06031A10R0FKHFT = R-Chip 0603, 10R0, 1%, 5K reel
1-2
XX
3-6
7-8
9-12
XXXX XX XXXX
13
14
X
X XX X
15-16 17
Series name (code 1-2)
9C=Phycomp thick film chip resistors
9T =Phycomp thin film chip resistors
Packing style (code 17 )
T = 5K paper
3 = 10K paper
4 = 20K paper
5 = 4K blister
6 = 5K blister
7 = 50K paper
P = 25K bulk case
Size code (standard resistors, code 3-6)
0201 0201 (0603)
0402 0402 (1005)
0603 0603 (1608)
0805 0805 (2012)
1206 1206 (3216)
1210 1210 (3225)
1218 1218 (3248)
2010 2010 (5025)
2512 2512 (6432)
AC34 0603 (1608) 4R concave array
AV34 0603 (1608) 4R convex array
AV22 0402 (1005) 2R convex array
AV24 0402 (1005) 4R convex array
AV28 0402 (1005) 8R convex array
RN31 10P8R in 1206 convex network
FR01 1206 (3216) Fusible
FR21 0603 (1608) Fusible
SR01 1206 (3216) Surge
VR01 1206 (3216) High voltage 5%
VR02 1206 (3216) High voltage 1%
VR11 0805 (2012) High voltage 5%
VR12 0805 (2012) High voltage 1%
VR21 2512 (6432) High voltage 5%
MR22 2512 (6432) Current sensor - low T. C. R.
MF22 2512 (6432) Current sensor - low T. C. R.
V321 0404 (1010) RF attenuator
Power rating (code 7-8)
1A
1/16W
0.063W
1A
1/10W
0.10W
2A
1/8W
0.125W
3A
1/4W
0.25W
5A
1/2W
0.5W
7A
1/20W
0.05W
8A
1/32W
0.03125W
12
3/4W
0.75W
1W 1W
1W
2W 2W
2W
(0402)
(0603)
(0805)
(1206)
(1210)
(0201)
(RN31)
(2010)
(1218/2512)
Special coding (code 15-16)
HF = SnPb
PF = Lead-free
AF = NiAu
T. C. R. (code 14)
C=±10 ppm/°C
D=±15 ppm/°C
A=±25 ppm/°C
B=±50 ppm/°C
K=±100 ppm/°C
L=±200 ppm/°C
E=±250 ppm/°C
M=±300 ppm/°C
G=±500 ppm/°C
F=0/+500 ppm/°C
R=±600 ppm/°C
Q=-100/+600 ppm/°C
P=±750 ppm/°C
H=±1000 ppm/°C
I=±1500 ppm/°C
J=±2000 ppm/°C
N=±3000 ppm/°C
dB values apply to
attenuators
Right values apply to
trimmable resistors
Tolerance (code 13)
E = ±0.01%
A = ±0.05%
B = ±0.1%; 0.2dB
C = ±0.25%; 0.3dB
D = ±0.5%; 0.5dB
F = ±1%; 1dB
G = ±2%; 2dB
J = ±5%
N = 0/-20%
R = 0/-30%
Resistance value (code 9-12)
0R00 = Jumper
R0XX < 0.1Ω
RXXX = 0.1Ω - 0.976Ω
XRXX = 1Ω - 9.76Ω
XXRX = 10Ω - 97.6Ω
XXX0 = 100Ω - 976Ω
XXX1 = 1K - 9.76K
XXX2 = 10K - 97.6K
XXX3 = 100K - 9.78K
XXX4 = 1M - 9.76M
XXX5 = 10M - 97.6M
XXX6 = 100M+
XXDB = 1 - 20DB
15
Chip Resistors General Information
IEC publication 63, SPQ, last digit of 12NC
Standard of values in a decade according to “IEC publication 63”
10
11
12
13
15
E24 series
33
36
39
43
47
100
102
105
107
110
133
137
140
143
147
178
182
187
191
196
237
243
249
255
261
E96 series
316
324
332
340
348
422
432
442
453
464
562
576
590
604
619
750
768
787
806
825
16
51
113
150
200
267
357
475
634
845
18
56
115
154
205
274
365
487
649
866
20
62
118
158
210
280
374
499
665
887
22
68
121
162
215
287
383
511
681
909
24
75
124
165
221
294
392
523
698
931
27
82
127
169
226
301
402
536
715
953
30
91
130
174
232
309
412
549
732
976
Packing quantities
Size code
Tape width
0100
0201
0402
0603
0612
0805
0815
0830
1206
1210
1218
2010
2512
4527
YC102
YC104
AF/YC122
TC122
ATV321
AF/YC124
TC124
YC162
YC164
TC164
YC158
YC248
YC324
YC358
8mm
8mm
8mm
8mm
8mm
8mm
8mm
12mm
8mm
8mm
12mm
12mm
12mm
24mm
8mm
8mm
8mm
8mm
8mm
8mm
8mm
8mm
8mm
8mm
8mm
12mm
12mm
12mm
178mm / Ø7” reel
254mm / Ø10" reel
Paper
Embossed
Paper
20 000
----10 000 / 20 000
----10 000 / 20 000
--20 000
5 000
--10 000
--5 000
--4 000 / 5 000
--10 000
--4 000
----4 000
--4 000 / 5 000
4 000
10 000
5 000
--10 000
--4 000
--4 000 / 2 000
------4 000
----1 000
--10 000
----10 000
----10 000
----10 000
----10 000
---10 000
--20 000
10 000
--20 000
5 000
---5 000
--10 000
5 000
--10 000
5 000
----5 000
4 000
--4 000
------4 000
---
330mm / Ø13" reel
Paper
Embossed
----50 000
--50 000
--20 000
------20 000
----------20 000
--20 000
--------16 000
----------------50 000
--50 000
------40 000
--40 000
------20 000
--20 000
--20 000
---------------
Weight
g /100pcs
0.007
0.016
0.058
0.192
0.862
0.450
1.71
4.594
0.862
1.471
2.703
2.273
3.704
16.225
0.052
0.099
0.100
0.112
0.100
0.281
0.311
0.376
0.833
1.030
0.855
0.885
2.703
3.333
Volume
mm3
0.0104
0.041
0.175
0.576
2.728
1.250
4.44
5.55
2.728
4.030
7.590
6.875
10.827
48.3
-----------------------------
12NC Ordering information
The first 8 or 9 digits of the 12 digit catalogue number are given under section
“Phycomp worldwide - Traditional type” on following pages.
The remaining 4 or 3 digits represent the resistance value with the last digit
indicating the multiplier as shown in table on the right.
16
Example:
0.001 Ω
0.02 Ω
0.3 Ω
1 Ω
33 kΩ
10 MΩ
= 0010 or 010
= 0200 or 200
= 3007 or 307
= 1008 or 108
= 3303 or 333
= 1006 or 106
Last digit of 12NC
Resistance
Last digit
0.001 to 0.0976 Ω
0
0.1 to 0.976 Ω
7
1 to 9.76 Ω
8
10 to 97.6 Ω
9
100 to 976 Ω
1
1 to 9.76 kΩ
2
10 to 97.6 kΩ
3
100 to 976 kΩ
4
1 to 9.76 MΩ
5
10 to 97.6 MΩ
6
Chip Resistors Selection Charts
RC - Thick film general purpose chip resistors, 01005 to 2512
Features
• Extremely thin and light
• Highly reliable multilayer electrode construction
• Compatible with all soldering processes
• Highly stable in auto-placement surface mounting applications
• Barrier layer end termination
• Jumper is available
• Available in 8mm tape & reel per IEC 60286-3 (EIA -RS 481)
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
marking layer
overcoat
protective glass
70
Rated Power (%)
100
resistive layer
80
60
inner electrode
40
RC0402RC2512
RC0100RC0201
20
125
-55
-40
-20
0
20
40
60
80
100
120
termination (Ni / matte tin)
155
140
inner electrode
ceramic substrate
160
Ambient Temperature ( C)
Dimensions
I1
I1
H
I2
I2
L
W
unit: mm
Type
RC01005
RC0201
RC0402
RC0603
RC0805
RC1206
RC1210
RC1218
RC2010
RC2512 (1W)
RC2512 (2W)
L
0.40 ±0.02
0.60 ±0.03
1.00 ±0.05
1.60 ±0.10
2.00 ±0.10
3.10 ±0.10
3.10 ±0.10
3.10 ±0.10
5.00 ±0.10
6.35 ±0.10
6.35 ±0.10
W
0.20 ±0.02
0.30 ±0.03
0.50 ±0.05
0.80 ±0.10
1.25 ±0.10
1.60 ±0.10
2.60 ±0.15
4.60 ±0.10
2.50 ±0.15
3.10 ±0.15
3.10 ±0.15
H
0.13 ±0.02
0.23 ±0.03
0.35 ±0.05
0.45 ±0.10
0.50 ±0.10
0.55 ±0.10
0.50 ±0.10
0.55 ±0.10
0.55 ±0.10
0.55 ±0.10
0.55 ±0.10
I1
0.10 ±0.03
0.10 ±0.05
0.20 ±0.10
0.25 ±0.15
0.35 ±0.20
0.45 ±0.20
0.45 ±0.15
0.45 ±0.20
0.45 ±0.15
0.60 ±0.20
0.60 ±0.20
I2
0.10 ±0.03
0.15 ±0.05
0.25 ±0.10
0.25 ±0.15
0.35 ±0.20
0.40 ±0.20
0.50 ±0.20
0.40 ±0.20
0.50 ±0.20
0.50 ±0.20
1.15 ±0.20
17
Chip Resistors Selection Charts
RC - Thick film general purpose chip resistors, 01005 to 2512
Electrical characteristics
Type
Power Operating Temp.
MWV RCOV DWV
range
P70
RC01005 1/32W -55°C to +125°C
RC0201 1/20W -55°C to +125°C
RC0402 1/16W -55°C to +125°C
15V
25V
50V
30V
E24 ±1%, 5% 1Ω≤R≤1MΩ
Jumper <50mΩ
1Ω≤R≤10MΩ
1Ω≤R≤10MΩ
50V
E24 ±5%
E24/E96 ±1%
E24/E96
±0.1%,±0.5%
Jumper
1Ω≤R≤22MΩ
1Ω≤R≤10MΩ
100V 100V
E24 ±5%
E24/E96 ±1%
E24/E96
±0.1%,±0.5%
Jumper
1Ω≤R≤22MΩ
1Ω≤R≤10MΩ
30V
50V
50V
100V 100V
1/5W -55°C to +125°C
50V
100V 100V
E24 ±5% 1Ω≤R≤1MΩ
E24/E96 ±1% 1Ω≤R≤1MΩ
1Ω≤R≤22MΩ
1Ω≤R≤10MΩ
1/8W -55°C to +155°C 150V 300V 300V
1/4W -55°C to +155°C 150V 300V 300V
E24 ±5% 1Ω≤R≤1MΩ
E24/E96 ±1% 1Ω≤R≤1MΩ
1/4W -55°C to +155°C 200V 400V 500V
E24 ±5%
E24/E96 ±1%
E24/E96
±0.1%,±0.5%
Jumper
1/2W -55°C to +155°C 200V 400V 500V
E24 ±5% 1Ω≤R≤1MΩ
E24/E96 ±1% 1Ω≤R≤1MΩ
1/2W -55°C to +155°C 200V 500V 500V
1W
-55°C to +155°C 200V 500V 500V
3/4W -55°C to +155°C 200V 500V 500V
1W
-55°C to +155°C 200V 500V 500V
2W
-55°C to +155°C 200V 400V 500V
RC2512
18
10Ω≤R≤1MΩ
<50mΩ
E24 ±5%
E24/E96 ±1%
E24/E96
±0.1%,±0.5%
Jumper
RC1206
RC2010
10Ω≤R≤1MΩ
<50mΩ
1/10W -55°C to +125°C
RC0805
RC1218
10Ω≤R≤1MΩ
<50mΩ
E24 ±5%
E24/E96 ±1%
E24/E96
±0.1%,±0.5%
Jumper
RC0603
RC1210
Resistance range & tolerance
E24 ±5%
E24/E96 ±1%
E24/E96 ±0.5%
Jumper
E24 ±5%
E24/E96 ±1%
E24/E96
±0.1%,±0.5%
Jumper
E24 ±5%
E24/E96 ±1%
E24/E96
±0.1%,±0.5%
Jumper
10Ω≤R≤1MΩ
<50mΩ
10Ω≤R≤22MΩ
1Ω≤R≤10MΩ
10Ω≤R≤1MΩ
<50mΩ
T. C. R.
( ppm/°C)
1Ω≤R≤10Ω -200~600 Rated current 0.5
10Ω≤R≤1MΩ ±250
Max. current 1.0
10Ω<R≤10MΩ ±200
Rated current 0.5
1Ω≤R≤10Ω -100/+350 Max. current 1.0
1Ω≤R≤10Ω ±200
10Ω<R≤10MΩ ±100
10MΩ<R≤22MΩ ±200
Rated current 1.0
Max. current 2.0
1Ω≤R≤10Ω ±200
10Ω<R≤10MΩ ±100
10MΩ<R≤22MΩ ±200
Rated current 1.0
Max. current 2.0
1Ω≤R≤1MΩ ±200
1Ω≤R≤10Ω ±200
10Ω<R≤10MΩ ±100
10MΩ<R≤22MΩ ±200
1Ω≤R≤1MΩ ±200
1Ω≤R≤10Ω ±200
10Ω<R≤10MΩ ±100
10MΩ<R≤22MΩ ±200
1Ω≤R≤1MΩ ±200
1Ω≤R≤22MΩ
1Ω≤R≤10MΩ
10Ω≤R≤1MΩ
<50mΩ
1Ω≤R≤1MΩ
1Ω≤R≤1MΩ
10Ω≤R≤1MΩ
<20mΩ
1Ω≤R≤22MΩ
1Ω≤R≤10MΩ
--
--
Rated current 2.0
Max. current 5.0
--
--
Rated current 2.0
Max. current 10.0
--
--
Rated current 2.0
Max. current 10.0
1Ω≤R≤10Ω ±200
10Ω<R≤10MΩ ±100
10MΩ<R≤22MΩ ±200
Rated current 6.0
Max. current 10.0
Rated current 2.0
Max. current 10.0
Rated current 2.0
Max. current 10.0
10Ω≤R≤1MΩ
<50mΩ
E24 ±5% 1Ω≤R≤150Ω
E24/E96 ±1% 1Ω≤R≤150Ω
Jumper criteria
(unit: A)
1Ω≤R≤150Ω
±200
--
--
Chip Resistors Selection Charts
RC - Thick film general purpose chip resistors, 01005 to 2512
Environmental characteristics
Performance test
Test method
Procedure
Life
MIL-STD-202Gmethod 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
High temperature exposure
MIL-STD-202Gmethod 108A
1 000 hours at maximum operating temperature
depending on specification, unpowered
01005: ±(1% +0.05Ω)
< 50mΩ for jumper
Others: ±(1% +0.05Ω) for 1% tol.
±(2% +0.05Ω) for 5% tol.
< 50mΩ for jumper
Moisture resistance
MIL-STD-202Gmethod 106F
Each temperature / humidity cycle is defined as
8 hours (method 106F), 3 cycles / 24 hours
for 10d with 25°C / 65°C 95% R.H
01005: ±(2.0% +0.05Ω)
< 100mΩ for jumper
Others: ±(0.5% +0.05Ω) for 1% tol.
±(2% +0.05Ω) for 5% tol.
< 100mΩ for jumper
Thermal shock
MIL-STD-202Gmethod 107G
LCT / UCT, number of cycles required is 300
Maximum transfer time is 20 seconds
01005: ±(1% +0.05Ω)
< 50mΩ for jumper
Others: ±(0.5% +0.05Ω) for 1% tol.
±(1% +0.05Ω) for 5% tol.
< 50mΩ for jumper
J-STD-002B
testB
Electrical test not required. Magnification 50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned (≥95% covered)
No visible damage
Wetting
Solderability
Resistance to
soldering heat
Short time overload
MIL-STD-202Gmethod 210F
Lead-free solder, 260°C, 10 seconds
immersion time
MIL-R-55342Dpara 4.7.5
2.5 times RCWV or maximum overload voltage
whichever is less for 5 seconds at room
temperature
Requirements
01005: ±(3% +0.05Ω)
< 100mΩ for jumper
Others: ±(1% +0.05Ω) for 1% tol.
±(3% +0.05Ω) for 5% tol.
< 100mΩ for jumper
01005: ±(1% +0.05Ω)
< 50mΩ for jumper
Others: ±(0.5% +0.05Ω) for 1% tol.
±(1% +0.05 Ω) for 5% tol.
< 50mΩ for jumper
No visible damage
01005: ±(2% +0.05Ω)
< 50mΩ for jumper
Others: ±(1% +0.05Ω) for 1% tol.
±(2% +0.05Ω) for 5% tol.
< 50mΩ for jumper
No visible damage
19
Chip Resistors Selection Charts
RC - Thick film general purpose chip resistors, 01005 to 2512
Global part number - Preferred type for ordering Yageo / Phycomp branded products
Ordering example: RC0402JR-07100KL
RC
040 2
J R ―
07
100K
Series name (code 1-2)
RC=General purpose thick film
Size code (code 3-6)
(inch / metric)
0100 = 0.4 x 0.2
0201 = 0.6 x 0.3
0402 = 1.0 x 0.5
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6
1210 = 3.2 x 2.6
1218 = 3.2 x 4.5
2010 = 5.0 x 2.5
2512 = 6.35 x 3.2
Tolerance (code 7)
B = ±0.1%
D = ±0.5%
F = ±1%
J=±5% (for Jumper ordering)
L
Default code(1/2) (code 17)
Resistance (code 12-16)
0R = Jumper
10R =10Ω
100R=100Ω
100K=100KΩ
Taping reel (code 10-11)
07 = 7 inch Dia. reel
10 = 10 inch Dia. reel
13 = 13 inch Dia. reel
7D = 7 inch Dia. reel,
2 x standard quantity
7W = 7 inch Dia. reel,
2 x standard power
T. C. R. (code 9)
“―” = Based on spec.
(― for thick film only)
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
C = Bulk cassette
S = ESD safe reel
Note: 1. All of our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. Letter L is system default code for ordering only
20
Chip Resistors Selection Charts
RC - Thick film general purpose chip resistors, 01005 to 2512
Phycomp worldwide - Traditional type
Size: inch (mm)
Power
Tolerance
Resistance
Packing
Quantity 5 000
10 000
20 000
50 000
Jumper 5 000
10 000
20 000
50 000
General purpose thick film / RC series
0402 (1005)
0603 (1608)
1/16 W
1/10 W
+5%
+1%
+5%
+1%
E24
E24 / E96
E24
E24 / E96
paper tape
paper tape
0201 (0603)
1/20 W
+5%
+1%
E24
E24 / E96
paper tape
---
---
---
2322 803 70...L 2322 806 7.…L 2322 705 70...L
2322 806 80...L 2322 806 8.…L
---
---
2322 702 60...L
2322 704 6.…L
2322 730 61...L
2322 734 6.…L
2322 706 7.…L
2322 702 70...L
2322 704 7.…L
2322 730 71...L
2322 734 7.…L
---
2322 702 81...L
2322 704 8.…L
2322 730 81...L
2322 734 8.…L
2322 706 8.…L
---
---
---
---
---
2322 803 60...L 2322 806 6.…L 2322 705 87...L
0805 (2012)
1/8 W
+5%
+1%
E24
E24 / E96
paper tape
---
---
---
2322 702 96001L
---
2322 730 91002L
---
2322 803 91001L
---
2322 705 91001L
---
2322 702 97001L
---
2322 730 91003L
---
---
---
---
---
2322 702 92002L
---
2322 730 92002L
---
---
---
2322 705 91007L
---
---
---
---
---
For ordering rules: See page 14 for E24 / E96 values and the last 4 or 3 digits of the 12NC catalogue number
Phycomp worldwide - Traditional type
Size: inch (mm)
Power
Tolerance
Resistance
Packing
Quantity 4 000
5 000
10 000
20 000
Jumper 4 000
5 000
10 000
20 000
1206 (3216)
1/4 W
+5%
+1%
E24
E24 / E96
paper tape
---
---
General purpose thick film / RC series
1210 (3225)
1218 (3248)
1/2 W
1W
+5%
+1%
+5%
+1%
E24
E24 / E96
E24
E24 / E96
paper tape
blister tape
---
2322 711 61...L 2322 724 6.…L 2390 735 70...L
2322 711 51...L 2322 724 7.…L
---
2322 711 81...L 2322 724 8.…L 2390 735 71...L
2010 (5025)
3/4 W
+5%
+1%
E24
E24 / E96
blister tape
2512 (6432)
1W
+5%
+1%
E24
E24 / E96
blister tape
---
2322 735 64...L
2322 735 7.…L
2322 760 60...L
2322 761 6.…L
2322 762 60...L
2322 763 6.…L
2390 735 3.…L
---
---
---
---
---
---
---
---
---
---
---
---
---
2390 735 5.…L
---
---
---
---
---
---
---
---
---
---
2322 735 90007L
---
2322 760 90003L
---
2322 762 90000L
---
2322 711 91032L
---
2390 735 90001L
---
---
---
---
---
---
---
2322 711 91005L
---
---
---
---
---
---
---
---
---
2322 711 92004L
---
---
---
---
---
---
---
---
---
For ordering rules: See page 14 for E24 / E96 values and the last 4 or 3 digits of the 12NC catalogue number
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
21
Chip Resistors Selection Charts
RC - Thick film high ohmic chip resistors, 0805 / 1206
Features
• Reduced size of final equipment
• Low assembly costs
• Higher component and equipment reliability
• High ohmic values up to 100MΩ
• Suitable for power supplies in small equipment
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
overcoat
protective glass
70
100
Rated Power (%)
marking layer
resistive layer
80
60
inner electrode
40
20
termination (Ni / matte tin)
155
-55
-40
-20
0
20
40
60
80
100
120
140
inner electrode
ceramic substrate
160
Ambient Temperature ( C)
Dimensions
I1
I1
H
I2
I2
L
22
W
unit: mm
Type
L
W
H
I1
I2
RC0805
2.00 ±0.10
1.25 ±0.10
0.50 ±0.10
0.35 ±0.20
0.35 ±0.20
RC1206
3.10 ±0.10
1.60 ±0.10
0.55 ±0.10
0.45 ±0.20
0.40 ±0.20
Chip Resistors Selection Charts
RC - Thick film high ohmic chip resistors, 0805 / 1206
Electrical characteristics
RC0805
Power
P70
1/8W
Operating Temp.
range
-55°C to +155°C
RC1206
1/4W
-55°C to +155°C
Type
MWV
RCOV
DWV
150V
300V
300V
200V
400V
500V
Resistance range & tolerance
T. C. R.
E24 ±5%, ±10%, ±20% 24MΩ ≤ R ≤ 100MΩ
±300 ppm/°C
Note: See page 11 for ordering code. For more detailed, please contact our sales offices, distributors and representatives in your region.
Environmental characteristics
Performance test
Test method
Procedure
Requirements
Life
MIL-STD-202Gmethod 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
±(2% +0.05Ω)
High temperature exposure
MIL-STD-202Gmethod 108A
1 000 hours at maximum operating temperature
depending on specification, unpowered
±(1% +0.05Ω)
Moisture resistance
MIL-STD-202Gmethod 106F
Each temperature / humidity cycle is defined as 8 hours (method
106F), 3 cycles / 24 hours for 10d with 25°C / 65°C 95% R.H
±(2% +0.05Ω)
Thermal shock
MIL-STD-202Gmethod 107G
LCT / UCT, number of cycles required is 300
Maximum transfer time is 20 seconds
±(1% +0.05Ω)
Wetting
J-STD-002B
testB
Electrical test not required. Magnification 50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned
(≥95% covered)
No visible damage
Resistance to
soldering heat
MIL-STD-202Gmethod 210F
Lead-free solder, 260°C, 10 seconds immersion time
±(1% +0.05Ω)
No visible damage
MIL-R-55342Dpara 4.7.5
2.5 times RCWV or maximum overload voltage whichever is
less for 5 seconds at room temperature
±(2% +0.05Ω)
No visible damage
Solderability
Short time overload
23
Chip Resistors Selection Charts
RE - Thick film precision grade chip resistors, 0402 to 1206
Features
• Narrow tolerance
• Low T. C. R.
• Highly reliable multilayer electrode construction
• Compatible with all soldering processes
• Suitable for auto-placement surface mounting applications
• Available in 8mm tape & reel per EIA RS481
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
marking layer
overcoat
protective glass
70
Rated Power (%)
100
resistive layer
80
60
inner electrode
40
termination (Ni / matte tin)
20
155
-55
-40
-20
0
20
40
60
80
100
120
140
inner electrode
ceramic substrate
160
Ambient Temperature ( C)
Dimensions
I1
I1
Type
RE0402
RE0603
RE0805
RE1206
H
I2
I2
L
24
W
unit: mm
L
1.00 ±0.05
1.60 ±0.10
2.00 ±0.10
3.10 ±0.10
W
0.50 ±0.05
0.80 ±0.10
1.25 ±0.10
1.60 ±0.10
H
0.32 ±0.05
0.45 ±0.10
0.50 ±0.10
0.55 ±0.10
I1
0.20 ±0.10
0.25 ±0.15
0.35 ±0.20
0.45 ±0.20
I2
0.25 ±0.10
0.25 ±0.15
0.35 ±0.20
0.40 ±0.20
Chip Resistors Selection Charts
RE - Thick film precision grade chip resistors, 0402 to 1206
Electrical characteristics
Type
Power
P70
Operating Temp. range
MWV
RCOV
DWV
RE0402
RE0603
RE0805
RE1206
1/16W
1/10W
1/8W
1/4W
-55°C to +155°C
-55°C to +155°C
-55°C to +155°C
-55°C to +155°C
50V
50V
150V
200V
100V
100V
300V
400V
100V
100V
300V
500V
Resistance range & tolerance
E24/E96 ±0.1%,±0.5%, ±1% 10Ω ≤ R ≤ 1MΩ
T. C. R.
±50 ppm/°C
Environmental characteristics
Performance test
Test method
Procedure
Requirements
Life
MIL-STD-202Gmethod 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
±(3% +0.05Ω)
High temperature exposure
MIL-STD-202Gmethod 108A
1 000 hours at maximum operating temperature
depending on specification, unpowered
±(3% +0.05Ω)
Moisture resistance
MIL-STD-202Gmethod 106F
Each temperature / humidity cycle is defined as
8 hours (method 106F), 3 cycles / 24 hours
for 10d with 25°C / 65°C 95% R.H
±(3% +0.05Ω)
Thermal shock
MIL-STD-202Gmethod 107G
LCT / UCT, number of cycles required is 300
Maximum transfer time is 20 seconds
±(1% +0.05Ω)
Wetting
IPC/JEDECJSTD-002B
testB
Electrical test not required. Magnification 50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned (≥95% covered)
No visible damage
Resistance to
soldering heat
MIL-STD-202Gmethod 210F
Lead-free solder, 260°C, 10 seconds immersion time
±(0.5%+ 0.05Ω)
No visible damage
MIL-R-55342Dpara 4.7.5
2.5 times RCWV or maximum overload voltage whichever is less for 5 seconds at room temperature
±(1%+ 0.05Ω)
No visible damage
Solderability
Short time overload
25
Chip Resistors Selection Charts
RE - Thick film precision grade chip resistors, 0402 to 1206
Global part number - Preferred type for ordering Yageo / Phycomp branded products
Ordering example: RE0603DRE07100KL
RE
060 3 D R
E
07
100K
L
Series name (code 1-2)
RE = Thick film precision grade
Size code (code 3-6)
(inch / metric)
0402 = 1.0 x 0.5
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6
Tolerance (code 7)
B = ±0.1%
D = ±0.5%
F = ±1%
Default code(1/2) (code 17)
Resistance (code 12-16)
10R =10Ω
100R=100Ω
100K=100KΩ
Taping reel (code 10-11)
07 = 7 inch Dia. reel
10 = 10 inch Dia. reel
13 = 13 inch Dia. reel
T. C. R. (code 9)
E = ±50 ppm/°C
Packing style (code 8 )
R = Paper tape reel
Note: 1. All of our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. Letter L is system default code for ordering only
3. RE series products are available by "Global part number" only
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
26
Chip Resistors Selection Charts
RT - Thin film high precision high stability chip resistors, 0402 to 2512
Features
• High precision - High stability
• Low T. C. R. / low noise
• High accuracy (±0.05%, ±0.1%, ±0.25%, ±0.5%, ±1%)
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
marking layer
protective glass
Rated Power (%)
resistive layer
70
100
inner electrode
80
60
RT1210-RT2512
20
-40
-20
0
20
40
60
80
100
120
ceramic substrate
155
125
-55
inner electrode
RT0402RT1206
40
140
160
Ambient Temperature (°C)
Dimensions
I1
I1
H
I2
I2
L
W
unit: mm
Type
L
W
H
I1
I2
RT0402
1.00 ±0.10
0.50 ±0.05
0.30 ±0.05
0.20 ±0.10
0.25 ±0.10
RT0603
1.60 ±0.10
0.80 ±0.10
0.45 ±0.10
0.25 ±0.15
0.25 ±0.15
RT0805
2.00 ±0.10
1.25 ±0.10
0.50 ±0.10
0.35 ±0.20
0.35 ±0.20
RT1206
3.10 ±0.10
1.60 ±0.10
0.55 ±0.10
0.45 ±0.20
0.40 ±0.20
RT1210
3.10 ±0.10
2.60 ±0.15
0.55 ±0.10
0.50 ±0.20
0.50 ±0.20
RT2010
5.00 ±0.10
2.50 ±0.15
0.55 ±0.10
0.60 ±0.20
0.50 ±0.20
RT2512
6.35 ±0.10
3.20 ±0.15
0.55 ±0.10
0.60 ±0.20
0.50 ±0.20
27
Chip Resistors Selection Charts
RT - Thin film high precision high stability chip resistors, 0402 to 2512
Electrical characteristics
Type
Power
P70
Operating Temp.
range
MWV
RCOV
DWV
Resistance range & tolerance
T. C. R.
10Ω ≤ R ≤ 121KΩ
RT0402
1/16W
50V
100V
75V
RT0603
1/10W
75V
150V
100V
5.1Ω ≤ R ≤ 681KΩ
RT0805
1/8W
150V
300V
200V
300V
E24/E96
±0.05%, ±0.1%, 5.1Ω ≤ R ≤ 1.5MΩ
±0.25%, ±0.5%, ±1%
5.1Ω ≤ R ≤ 1MΩ
-55°C to +155°C
RT1206
1/4W
200V
400V
RT1210
1/4W
200V
400V
400V
RT2010
1/2W
200V
400V
400V
RT2512
3/4W
200V
400V
400V
-55°C to +125°C
±50 ppm/°C
±25 ppm/°C
±15 ppm/°C
±10 ppm/°C
10Ω ≤ R ≤ 1MΩ
Environmental characteristics
Performance test
Test method
Procedure
Requirements
Life
MIL-STD-202Gmethod 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
±(0.5%+ 0.05Ω) for RT
High temperature exposure
MIL-STD-202Gmethod 108A
1 000 hours at maximum operating temperature
depending on specification, unpowered
±(0.5%+ 0.05Ω)
Moisture resistance
MIL-STD-202Gmethod 106F
Each temperature / humidity cycle is defined as 8 hours
(method 106F), 3 cycles / 24 hours for 10d with
25°C / 65°C 95% R.H
±(0.5%+ 0.05Ω)
Thermal shock
MIL-STD-202Gmethod 107G
LCT / UCT, number of cycles required is 300
Maximum transfer time is 20 seconds
±(0.5%+ 0.05Ω)
Short time overload
MIL-R-55342Dpara 4.7.5
2.5 times RCWV or maximum overload voltage whichever is less for 5 seconds at room temperature
±(0.5%+ 0.05Ω) for RT
No visible damage
Resistance to
soldering heat
MIL-STD-202Gmethod 210F
Lead-free solder, 260°C, 10 seconds immersion time
±(0.5% +0.05Ω)
No visible damage
Wetting
J-STD-002B
testB
Electrical test not required. Magnification 50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned (≥95%
covered)
No visible damage
Solderability
28
Chip Resistors Selection Charts
RT - Thin film high precision high stability chip resistors, 0402 to 2512
Global part number - Preferred type for ordering Yageo / Phycomp branded products
Ordering example: RT0603DRE07100KL
RT
0603
D R
E
07
100K
Series name (code 1-2)
RT=High precision - High stability thin film
Size code (code 3-6)
(inch / metric)
0402 = 1.0 x 0.5
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6
1210 = 3.2 x 2.6
2010 = 5.0 x 2.5
2512 = 6.35 x 3.2
Tolerance (code 7)
W = ±0.05%
B = ±0.1%
C = ±0.25%
D = ±0.5%
F = ±1%
L
Default code (1/2) (code 17)
Resistance (code 12-16)
10R =10Ω
100R=100Ω
10K =10KΩ
100K=100KΩ
Taping reel (code 10-11)
07 = 7 inch Dia. reel
10 = 10 inch Dia. reel
13 = 13 inch Dia. reel
T. C. R. (code 9)
B=±10 ppm/°C (on request)
C=±15 ppm/°C (on request)
D=±25 ppm/°C
E=±50 ppm/°C
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Note: 1. All of our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. Letter L is system default code for ordering only
29
Chip Resistors Selection Charts
RT - Thin film high precision high stability chip resistors, 0402 to 2512
Phycomp worldwide - Traditional type
High precision - High stability
Size: inch (mm)
0402 (1005)
0603 (1608)
Power
1/16 W
1/10 W
Tolerance
±1%
±0.5%
±0.25%
±0.1%
±1%
±0.5%
±0.25%
±0.1%
Resistance
E24 / E96
E24 / E96
Packing
paper tape
paper tape
--------2390 604 7.…L 2390 604 6.…L 2390 604 5.…L 2390 604 4.…L
Quantity TC25 5 000
--------2390 404 7.…L 2390 404 6.…L 2390 404 5.…L 2390 404 4.…L
TC50 5 000
--------TC25 10 000 2390 607 7.…L 2390 607 6.…L 2390 607 5.…L 2390 607 4.…L
--------TC50 10 000 2390 407 7.…L 2390 407 6.…L 2390 407 5.…L 2390 407 4.…L
For ordering rules: See page 14 for E24 / E96 values and the last 4 or 3 digits of the 12NC catalogue number
Phycomp worldwide - Traditional type
Size: inch (mm)
Power
Tolerance
Resistance
Packing
Quantity TC10 5 000
TC15 5 000
TC25 5 000
TC50 5 000
0805 (2012)
1/8 W
±0.5%
±0.25%
E24 / E96
paper tape
±1%
High precision - High stability
1206 (3216)
1/4 W
±0.1%
±1%
±0.5%
±0.25%
E24 / E96
paper tape
±0.1%
1210 (3225)
1/2 W
±0.5%
±0.25%
E24 / E96
paper tape
±1%
±0.1%
2390 801 7.…L 2390 801 6.…L 2390 801 5....L 2390 801 4....L 2390 811 7....L 2390 811 6....L 2390 811 5....L 2390 811 4....L 2390 812 7....L 2390 812 6....L 2390 812 5....L 2390 812 4....L
2390 701 7.…L 2390 701 6.…L 2390 701 5....L 2390 701 4....L 2390 711 7....L 2390 711 6....L 2390 711 5....L 2390 711 4....L 2390 712 7....L 2390 712 6....L 2390 712 5....L 2390 712 4....L
2390 601 7.…L 2390 601 6....L 2390 601 5....L 2390 601 4....L 2390 611 7....L 2390 611 6....L 2390 611 5....L 2390 611 4....L 2390 612 7....L 2390 612 6....L 2390 612 5....L 2390 612 4....L
2390 401 7.…L 2390 401 6....L 2390 401 5....L 2390 401 4....L 2390 411 7....L 2390 411 6....L 2390 411 5....L 2390 411 4....L 2390 412 7....L 2390 412 6....L 2390 412 5....L 2390 412 4....L
For ordering rules: See page 14 for E24 / E96 values and the last 4 or 3 digits of the 12NC catalogue number
Phycomp worldwide - Traditional type
Size: inch (mm)
Power
Tolerance
Resistance
Packing
Quantity TC10 4 000
TC15 4 000
TC25 4 000
TC50 4 000
High precision - High stability
2010 (5025)
1/2 W
±0.5%
±0.25%
±0.1%
±1%
E24 / E96
blister tape
±1%
2512 (6432)
3/4 W
±0.5%
±0.25%
E24 / E96
blister tape
±0.1%
2390 815 7....L
2390 815 6....L
2390 815 5....L
2390 815 4....L
2390 818 7....L
2390 818 6....L
2390 818 5....L
2390 818 4....L
2390 731 7....L
2390 731 6....L
2390 731 5....L
2390 731 4....L
2390 735 7....L
2390 735 6....L
2390 735 5....L
2390 735 4....L
2390 615 7....L
2390 615 6....L
2390 615 5....L
2390 615 4....L
2390 618 7....L
2390 618 6....L
2390 618 5....L
2390 618 4....L
2390 415 7....L
2390 415 6....L
2390 415 5....L
2390 415 4....L
2390 418 7....L
2390 418 6....L
2390 418 5....L
2390 418 4....L
For ordering rules: See page 14 for E24 / E96 values and the last 4 or 3 digits of the 12NC catalogue number
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 13 for details.
Thin film product range against tolerance / T. C. R. (ordering code)
Tolerance
T. C. R. (ppm/°C)
RT0402
RT0603
RT0805
RT1206
RT1210
RT2010
RT2512
30
±10 (B)
±0.05% (W)
±0.1% (B)
±0.25% (C)
±0.5% (D)
±1% (F)
±15 (C) ±25 (D) ±10 (B) ±15 (C) ±25 (D) ±50 (E) ±10 (B) ±15 (C) ±25 (D) ±50 (E) ±25 (D) ±50 (E) ±50 (E)
--
--
--
10R - 100K 10R - 100K 10R - 121K 10R - 121K 10R - 100K 10R - 100K 10R - 121K 10R - 121K 10R - 121K 10R - 121K 10R - 121K
1K - 47K
1K - 47K
1K - 47K
10R - 100K 10R - 100K 10R - 681K 10R - 681K 10R - 100K 10R - 100K 10R - 681K 5R1 - 681K 10R - 681K 5R1 - 681K 5R1 - 681K
100R - 100K 100R - 100K 100R - 100K 10R - 100K 10R - 100K 10R - 1.5M 10R - 1.5M 10R - 100K 10R - 100K 10R - 1.5M 5R1 - 1.5M 10R - 1.5M 5R1 - 1.5M 5R1 - 1.5M
100R - 100K 100R - 100K 100R - 100K 10R - 100K 10R - 100K 10R - 1.5M 10R - 1.5M 10R - 100K 10R - 100K 10R - 1.5M 5R1 - 1.5M 10R - 1.5M 5R1 - 1.5M 5R1 - 1.5M
100R - 100K 100R - 100K 100R - 100K 10R - 100K 10R - 100K 10R - 1M
10R - 1M 10R - 100K 10R - 100K 10R - 1M
5R1 - 1M
10R - 1M
5R1 - 1M
5R1 - 1M
100R - 100K 100R - 100K 100R - 100K 10R - 100K 10R - 100K 10R - 1M
10R - 1M 10R - 100K 10R - 100K 10R - 1M
10R - 1M
10R - 1M
10R - 1M
10R - 1M
100R - 100K 100R - 100K 100R - 100K 10R - 100K 10R - 100K 10R - 1M
10R - 1M 10R - 100K 10R - 100K 10R - 1M
10R - 1M
10R - 1M
10R - 1M
10R - 1M
Chip Resistors Selection Charts
YC/TC - Thick film array / network chip resistors
Features
• Integrated discrete chip resistors from 2 to 8 pcs
• More efficient in pick & place application
• Low assembly costs
• Reduced size of final equipment
• Higher component and equipment reliability
Schematics
Dimensions
T
Type
H / H1
YC102
H: 0.35 ±0.10
0.20 ±0.10 0.50 ±0.05 0.80 ±0.10 0.35 ±0.10 0.15 ±0.10 0.60 ±0.10
YC104
H: 0.20 ±0.10
0.15 ±0.05
B
W1
W2
Side view for all types
P
0.40
(Typical)
L
T
W1
W2
1.40 ±0.10 0.35 ±0.10 0.15 ±0.10 0.60 ±0.10
YC122 H: 0.21 +0.10/-0.05 0.20 ±0.10 0.67 ±0.05 1.00 ±0.10 0.30 ±0.10 0.25 ±0.10 1.00 ±0.10
YC 102/122/162
YC 104/124/164/324
158/358/248
H
H
P
H: 0.45 ±0.05
H1:0.30 ±0.05
0.20 ±0.15 0.50 ±0.05 2.00 ±0.10 0.45 ±0.10 0.30 ±0.15 1.00 ±0.10
YC162
H: 0.30 ±0.10
0.30 ±0.10 0.80 ±0.05 1.60 ±0.10 0.40 ±0.10 0.30 ±0.10 1.60 ±0.10
a
B
B
YC124
YC164
YC248
P
a
H1
L
YC324
L
TC 122
TC 124/164
H
H
P
a
B
B
a
P
L
L
0.30 ±0.15 0.80 ±0.05 3.20 ±0.15 0.60 ±0.10 0.30 ±0.15 1.60 ±0.15
0.30 ±0.15 0.50 ±0.05 4.00 ±0.20 0.45 ±0.10 0.40 ±0.15 1.60 ±0.15
0.50 ±0.20 1.27 ±0.05 5.08 ±0.20 0.60 ±0.10 0.50 ±0.15 3.20 ±0.20
TC122
H: 0.30 ±0.05
0.25 ±0.15 0.50 ±0.05 1.00 ±0.10 0.30 ±0.10 0.25 ±0.15 1.00 ±0.10
TC122H
TC122M
TC124
H : 0.40 ±0.05
H : 0.30 ±0.05
H: 0.30 ±0.10
0.25 ±0.15 0.50 ±0.05 1.00 ±0.10 0.30 ±0.10
1.00 ±0.10
-0.25 ±0.15 0.50 ±0.05 1.00 ±0.10 0.30 ±0.10 0.25 ±0.15 1.00 ±0.10
0.20 ±0.10 0.50 ±0.05 2.00 ±0.10 0.40 ±0.10 0.25 ±0.10 1.00 ±0.10
TC124H
H : 0.30 ±0.05
TC124M
TC164
H : 0.30 ±0.05
H: 0.60 ±0.15
H: 0.45±0.05
H1: 0.32±0.05
H: 1.10 ±0.15
H1:0.90 ±0.15
1.00 ±0.10
-0.20 ±0.10 0.50 ±0.05 2.00 ±0.10 0.40 ±0.10 0.25 ±0.10 1.00 ±0.10
0.30 ±0.15 0.80 ±0.05 3.20 ±0.15 0.60 ±0.10 0.30 ±0.15 1.60 ±0.15
YC158
unit: mm
Note: 1. YC104 is flat type
H: 0.65 ±0.05
H1:0.50 ±0.15
H: 0.45 ±0.05
H1:0.30 ±0.05
H: 1.10 ±0.15
H1:0.90 ±0.15
YC358
0.20 ±0.10 0.50 ±0.05 2.00 ±0.10 0.40 ±0.10
0.30 ±0.15 0.64 ±0.05 3.20 ±0.20 0.60 ±0.10 0.35 ±0.15 1.60 ±0.15
0.50 ±0.15 1.27 ±0.05 6.40 ±0.20 0.60 ±0.10 0.50 ±0.15 3.20 ±0.20
31
Chip Resistors Selection Charts
YC/TC - Thick film array / network chip resistors
Electrical characteristics
Type
YC102
YC104
YC122
Power Operating Temp.
MWV RCOV DWV
range
P70
Resistance range & tolerance
E24 ±5%
30V E24/E96 ±1%
Jumper
E24 ±5%
1/32W -55°C to +125°C 12.5V 25V 25V E24/E96 ±1%
Jumper
E24 ±5%
1/16W -55°C to +125°C 50V 100V 100V E24/E96 ±1%
Jumper
1/32W -55°C to +125°C
15V
30V
10Ω ≤ R ≤ 1MΩ
10Ω ≤ R ≤ 1MΩ
< 0.05Ω
10Ω ≤ R ≤ 1MΩ
10Ω ≤ R ≤ 1MΩ
< 0.05Ω
1Ω ≤ R ≤ 1MΩ
10Ω ≤ R ≤ 1MΩ
< 0.05Ω
E24 ±5% 1Ω ≤ R ≤ 1MΩ
100V E24/E96 ±1% 1Ω ≤ R ≤ 1MΩ
Jumper < 0.05Ω
Jumper criteria
(unit: A)
T. C. R.
Rated current 0.5
Max. current 1.0
±200 ppm/°C
Rated current 0.5
Max. current 1.0
Rated current 0.5
Max. current 1.0
1Ω ≤ R ≤ 10Ω ±250 ppm/°C Rated current 1.0
10Ω ≤ R ≤ 1MΩ ±200 ppm/°C Max. current 2.0
YC124
1/16W -55°C to +155°C
25V
50V
YC162
1/16W -55°C to +125°C
50V
100V 100V
YC164
1/16W -55°C to +155°C
50V
E24 ±5% 1Ω ≤ R ≤ 1MΩ
100V 100V E24/E96 ±1% 1Ω ≤ R ≤ 1MΩ
Jumper < 0.05Ω
Rated current 1.0
Max. current 2.0
YC248
1/16W -55°C to +155°C
50V
E24 ±5% 10Ω ≤ R ≤ 1MΩ
100V 100V E24/E96 ±1% 10Ω ≤ R ≤ 1MΩ
Jumper < 0.05Ω
Rated current 2.0
Max. current 10.0
YC324
1/8W
-55°C to +155°C 200V
TC122
TC122H 1/16W -55°C to +125°C
TC122M
E24 ±5% 10Ω ≤ R ≤ 1MΩ
100V 100V E24/E96 ±1% 10Ω ≤ R ≤ 1MΩ
Jumper < 0.05Ω
50V
E24 ±5% 10Ω ≤ R ≤ 1MΩ
100V 100V E24/E96 ±1% 10Ω ≤ R ≤ 1MΩ
Jumper < 0.05Ω
TC124M
TC164
1/16W -55°C to +155°C
50V
YC158
YC358
1/16W -55°C to +155°C
1/16W -55°C to +155°C
25V
50V
±200 ppm/°C
Rated current 1.0
Max. current 2.0
E24 ±5% 10Ω ≤ R ≤ 1MΩ
E24/E96 ±1% 10Ω ≤ R ≤ 1MΩ
50V
TC124
TC124H 1/16W -55°C to +125°C
500V 500V
E24 ±5% 10Ω ≤ R ≤ 1MΩ
Jumper < 0.05Ω
E24 ±5%
100V 100V E24/E96 ±1%
Jumper
50V 50V
E24 ±5%
100V 100V
E24 ±5%
-- --
±200 ppm/°C
10Ω ≤ R ≤ 1MΩ
10Ω ≤ R ≤ 1MΩ
< 0.05Ω
10Ω ≤ R ≤ 100KΩ
10Ω ≤ R ≤ 330KΩ
Rated current 1.0
Max. current 1.5
Rated current 1.0
Max. current 1.5
Rated current 1.0
Max. current 2.0
-- --- --
Environmental characteristics
Performance test
Test method
Procedure
Requirements
Life
MIL-STD-202Gmethod 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
±(2% +0.05Ω)
< 100mΩ for jumper
High temperature exposure
MIL-STD-202Gmethod 108A
1 000 hours at maximum operating temperature
depending on specification, unpowered
±(1% +0.05Ω)
< 50mΩ for jumper
Moisture resistance
MIL-STD-202Gmethod 106F
Each temperature / humidity cycle is defined as 8 hours
(method 106F), 3 cycles / 24 hours for 10d with
25°C / 65°C 95% R.H
±(2% +0.05Ω)
< 100mΩ for jumper
Thermal shock
MIL-STD-202Gmethod 107G
LCT / UCT, number of cycles required is 300
Maximum transfer time is 20 seconds
±(0.5% +0.05Ω) for 10K to 10M
±(1% +0.05Ω) for others
< 50mΩ for jumper
Wetting
J-STD-002B
testB
Electrical test not required. Magnification 50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned (≥95% covered)
Resistance to
soldering heat
MIL-STD-202Gmethod 210F
Lead-free solder, 260°C, 10 seconds immersion time
±(1% +0.05Ω)
< 50mΩ for jumper
No visible damage
MIL-R-55342Dpara 4.7.5
2.5 times RCWV or maximum overload voltage whichever is less for 5 seconds at room temperature
±(2% +0.05Ω)
< 50mΩ for jumper
No visible damage
Solderability
Short time overload
32
Chip Resistors Selection Charts
YC/TC - Arrays, convex / concave / flat
Global part number - Arrays
Ordering example: YC122-JR-07100KL
YC 12 2 ― J R ―
07
100K
Series name (code 1-2)
YC=Array & Network
(convex / flat) thick film
TC=Array (concave) thick film
L
Default code (code 17)
Resistance (code 12-16)
0R =Jumper
10R =10Ω
100R=100Ω
100K=100KΩ
Size code (inch) (code 3-4)
10 = 0201 x 2 (0202)
0201 x 4 (0204)
12 = 0402 x 2 (0404)
0402 x 4 (0408)
16 = 0603 x 2 (0606)
0603 x 4 (0612)
24 = 0602 x 8 (0616)
32 = 1206 x 4 (1224)
Taping reel (code 10-11)
07 = 7 inch Dia. reel
10 = 10 inch Dia. reel
13 = 13 inch Dia. reel
T. C. R. (code 9)
“―” = Based on spec.
Number of resistors (code 5)
2 = 2 resistors
4 = 4 resistors
8 = 8 resistors
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Schematic (code 6)
H = Reverse & Half type
M = Reverse type
"-" = Based on spec.
Tolerance (code 7)
F = ±1%
J = ±5% (for Jumper ordering)
Note: 1. All of our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. Letter L is system default code for ordering only
Phycomp worldwide - Traditional type
Array thick film chip resistors
Size: inch / mm
2 X 0402 /
1X1
4 X 0402 /
2X1
8 X 0602 /
4.0 X 1.6
Power
Tolerance
1/16 W
+5%
+1%
1/16 W
+5%
+1%
1/16 W
+5%
+1%
Type
R-array /
R-network
(convex)
R-array /
R-network
(convex)
R-array /
R-network
(convex)
R-array /
R-network
(convex)
R-array /
R-network
(convex)
R-array /
R-network
(convex)
4 X 0603 /
3.2 X 1.3
+5%
R-array /
R-network
(convex)
1/16 W
+1%
+5%
R-array /
R-network
(convex)
R-array /
R-network
R-network
(concave)
4 X1206 /
5.2 X 3.1
+1%
1/8 W
+5%
R-array / R-array /
R-network R-network
(concave) (convex)
E24 / E96
E24
E24 / E96
E24
E24 / E96
E24
E24 / E96
E24
E24/E96
E24
Resistance
E24
Packing
paper tape
paper tape
paper tape
paper tape
blister tape
--------------------2350 039 10...L
Quantity 4 000
--------2350 053 10...L 2350 043 1....L 2350 035 10...L 2350 025 1....L 2350 034 10...L 2350 024 1...L
--5 000
--------------10 000 2350 013 11...L 2350 013 2....L 2350 033 11...L 2350 023 2....L
--------2350 053 91001L
--2350 035 91001L
--2350 034 91001L
----Jumper 5 000
--2350 033 91001L
----------------10 000 2350 013 91001L
For ordering rules: See page 14 for E24 / E96 values and the last 4 or 3 digits of the 12NC catalogue number
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
33
Chip Resistors Selection Charts
YC/TC - Networks, T-type / L-type
Global part number - Networks
Ordering example: YC158TJR-07100KL
YC 15 8
T
J R ―
07
100K
L
Series name (code 1-2)
YC=Array & Network (convex) thick film
Default code (code 17)
Resistance (code 12-16)
0R =Jumper
10R =10Ω
100R=100Ω
100K=100KΩ
Size code (inch) (code 3-4)
15 = 10Pin/8R (0612)
35 = 10Pin/8R (1225)
Number of resistors (code 5)
8 = 8 resistors
Taping reel (code 10-11)
07 = 7 inch Dia. reel
13 = 13 inch Dia. reel
Schematic (code 6)
L = L-type (for YC358)
T = T-type (for YC158/358)
T. C. R. (code 9)
“―” = Based on spec.
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Tolerance (code 7)
F = ±1%
J = ±5%
Note: 1. All of our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. Letter L is system default code for ordering only
Phycomp worldwide - Traditional type
Network thick film chip resistors
Size: inch (mm)
Power
Tolerance
0612 (1632)
1/16 W
+5%
1225 (3264)
1/16 W
+5%
Type
T-type 10 Pin / 8R
PIN 5 and PIN 10 no resistance
T-type 10 Pin / 8R
PIN 5 and PIN 10 no resistance
L-type 10 Pin / 8R
PIN 1 and PIN 6 no resistance
Resistance
Packing
Quantity 4 000
5 000
E24
paper tape
--2350 230 10...L
E24
E24
blister tape
2350 201 10...L
---
For ordering rules: See page 14 for E24 / E96 values and the last 4 or 3 digits of the 12NC catalogue number
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
34
2350 200 10...L
---
Chip Resistors Selection Charts
RL - Thick film low ohmic chip resistors, 0402 to 2512
Features
• Current sensing of desktop & notebook PC
• Resistance values down to 0.01Ω
• Highly reliable multilayer electrode construction
• Low inductance
• High speed logic circuits
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
marking layer
overcoat
protective glass
70
Rated Power (%)
100
resistive layer
80
60
inner electrode
40
termination (Ni / matte tin)
20
125
-55
-40
-20
0
20
40
60
80
100
120
140
inner electrode
ceramic substrate
160
Ambient Temperature ( C)
Dimensions
I1
I1
H
I2
I2
L
W
unit: mm
Type
L
W
H
I1
I2
RL0402
1.00 ±0.10
0.50 ±0.05
0.35 ±0.05
0.20 ±0.10
0.25 ±0.10
RL0603
1.60 ±0.10
0.80 ±0.10
0.45 ±0.10
0.25 ±0.15
0.25 ±0.15
RL0805
2.00 ±0.10
1.25 ±0.10
0.50 ±0.10
0.35 ±0.20
0.35 ±0.20
RL1206
3.10 ±0.10
1.60 ±0.10
0.55 ±0.10
0.45 ±0.20
0.45±0.20
RL1210
3.10 ±0.10
2.60 ±0.15
0.55 ±0.10
0.50 ±0.20
0.50 ±0.20
RL1218
3.05 ±0.15
4.60 ±0.20
0.55 ±0.10
0.45 ±0.25
0.50 ±0.25
RL2010
5.00 ±0.10
2.50 ±0.15
0.55 ±0.10
0.60 ±0.20
0.50 ±0.20
RL2512
6.35 ±0.10
3.20 ±0.15
0.55 ±0.10
0.60 ±0.20
0.50 ±0.20
35
Chip Resistors Selection Charts
RL - Thick film low ohmic chip resistors, 0402 to 2512
Electrical characteristics
Operating Temp.
range
Type
Power
P70
RL0402
1/16W
50mΩ ≤ R < 1Ω
Max. resistance 20mΩ
Rated current 1.5A
RL0603
1/10W
10mΩ ≤ R < 1Ω
Max. resistance 20mΩ
Rated current
2A
1/8W
10mΩ ≤ R < 1Ω
Max. resistance 20mΩ
Rated current 2.5A
RL0805
1/4W
1/4W
RL1206
-55°C to +125°C
T. C. R.
( ppm/°C)
Resistance range & tolerance
E24 ±1%, ±2%, ±5%
Jumper criteria
10mΩ ≤ R < 1Ω See following table
--“T.C.R.- RL series” Max. resistance 20mΩ
10mΩ ≤ R < 1Ω
Rated current 3.5A
1/2W
10mΩ ≤ R < 1Ω
--
--
RL1210
1/2W
10mΩ ≤ R < 1Ω
--
--
RL1218
1W
10mΩ ≤ R < 1Ω
--
--
RL2010
3/4W
10mΩ ≤ R < 1Ω
--
--
RL2512
1W
10mΩ ≤ R < 1Ω
--
--
Note: The partial values of 25 / 40 / 50 / 60 / 250 / 400 / 500 mΩ are also available
T. C. R. - RL series
Type
Operating
Temp. range
T. C. R.
Resistancec
range
50mΩ≤R<100mΩ
100mΩ≤R<500mΩ
500mΩ≤R<1Ω
±1000 ppm/°C
±800 ppm/°C
±300 ppm/°C
RL0402 -55°C to +125°C 50mΩ≤R<1Ω
RL0603 -55°C to +125°C 10mΩ≤R<1Ω
10mΩ≤R≤36mΩ
36mΩ≤R≤91mΩ
91mΩ<R≤500mΩ
500mΩ<R<1Ω
±1 500 ppm/°C
±1 200 ppm/°C
±800 ppm/°C
±300 ppm/°C
10mΩ≤R≤18mΩ 18mΩ<R≤47mΩ 47mΩ<R≤91mΩ 91mΩ<R≤360mΩ 360mΩ<R≤500mΩ 500mΩ<R<1Ω
RL0805
RL1206 -55°C to +125°C 10mΩ≤R<1Ω
RL1210
RL1218 -55°C to +125°C 10mΩ≤R<1Ω
±1 500 ppm/°C ±1 200 ppm/°C ±1 000 ppm/°C
±600 ppm/°C
±300 ppm/°C
±200 ppm/°C
±1 500 ppm/°C ±1 000 ppm/°C
±600 ppm/°C
±300 ppm/°C
±200 ppm/°C
±800 ppm/°C
10mΩ≤R≤30mΩ
30mΩ<R≤56mΩ
56mΩ<R≤180mΩ
180mΩ<R<1Ω
±2 000 ppm/°C
±1 000 ppm/°C
±700 ppm/°C
±250 ppm/°C
10mΩ≤R≤18mΩ 18mΩ<R≤47mΩ 47mΩ<R≤91mΩ 91mΩ<R≤360mΩ 360mΩ<R≤500mΩ 500mΩ<R<1Ω
RL2010
RL2512
-55°C to +125°C 10mΩ≤R<1Ω
±1 500 ppm/°C ±1 200 ppm/°C ±1 000 ppm/°C
±600 ppm/°C
±300 ppm/°C
±200 ppm/°C
±1 500 ppm/°C ±1 200 ppm/°C
±600 ppm/°C
±300 ppm/°C
±200 ppm/°C
±800 ppm/°C
Environmental characteristics
Performance test
Test method
Procedure
Requirements
Life
MIL-STD-202Gmethod 108A
1 000 hours at 70°C ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
±2%
High temperature
exposure
MIL-STD-202Gmethod 108A
1 000 hours at maximum operating temperature
depending on specification, unpowered
±1%
Moisture resistance
MIL-STD-202Gmethod 106F
Each temperature / humidity cycle is defined as 8 hours (method
106F), 3 cycles / 24 hours for 10d with 25°C / 65°C 95% R.H
±2%
Thermal shock
MIL-STD-202Gmethod 107G
LCT / UCT, number of cycles required is 300
Maximum transfer time is 20 seconds
±1%
Wetting
J-STD-002B
testB
Electrical test not required. Magnification 50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned
(≥95% covered)
No visible damage
Resistance to
soldering heat
MIL-STD-202Gmethod 210F
Lead-free solder, 260°C, 10 seconds immersion time
±1%
No visible damage
MIL-R-55342Dpara 4.7.5
RL standard power:
6.25 times of rated power for 5 seconds at room temperature
RL high power:
5 times of rated power for 5 seconds at room temperature
±2%
No visible damage
Solderability
Short time overload
36
Chip Resistors Selection Charts
RL - Thick film low ohmic chip resistors, 0402 to 2512
Global part number - Preferred type
Ordering example: RL0603JR-070R01L
RL
0603
J R ―
07
0R01
Series name (code 1-2)
RL=Thick Film Low ohmic
Size code (code 3-6)
(inch / metric)
0402 = 1.0 x 0.5
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6
1210 = 3.2 x 2.6
1218 = 3.2 x 4.5
2010 = 5.0 x 2.5
2512 = 6.35 x 3.2
Tolerance (code 7)
F = ±1%
G = ±2%
J=±5%
L
Default code(1/2) (code 17)
Resistance (code 12-16)
0R01=0.01Ω
0R1 =0.1Ω
0R2 =0.2Ω
Taping reel (code 10-11)
07 = 7 inch Dia. reel
10 = 10 inch Dia. reel
13 = 13 inch Dia. reel
T. C. R. (code 9)
“―” = Based on spec.
(― for thick film only)
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Note: 1. All of our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. Letter L is system default code for ordering only
37
Chip Resistors Selection Charts
RL - Thick film low ohmic chip resistors, 0402 to 2512
Phycomp worldwide - Traditional type
Low ohmic chip resistors
Size: inch (mm)
0402 (1005)
0603 (1608)
0805 (2012)
1206 (3216)
Power
1/16 W
1/10 W
1/8 W
1/4 W
Tolerance
+5%
+1%
+5%
+1%
+5%
+1%
+5%
+1%
Resistance
E24
E24
E24
E24
E24
E24
E24
E24
Packing
paper tape
paper tape
paper tape
paper tape
----2350 512 10…L 2350 512 12…L 2350 511 10…L 2350 511 12…L 2350 510 10…L 2350 510 12…L
Quantity
5 000
------------10 000 2350 513 20…L 2350 513 22…L
For ordering rules: See page 14 for E24 / E96 values and the last 4 or 3 digits of the 12NC catalogue number
Phycomp worldwide - Traditional type
Size: inch (mm)
1210 (3225)
Power
1/2 W
Tolerance
+5%
+1%
Resistance
E24
E24
Packing
paper tape
----Quantity
4 000
2390 735 3….L
5 000 2390 735 90..0L/60..7L
Low ohmic chip resistors
1218 (3248)
1W
+5%
+1%
E24
E24
blister tape
2322 735 64…L
2322 735 7….L
---
---
2010 (5025)
3/4 W
+5%
+1%
E24
E24
blister tape
2322 760 90..0L/60..7L 2322 761 90..0L/6...7L 2322 762 90..0L/60..7L 2322 763 90..0L/6...7L
For ordering rules: See page 14 for E24 / E96 values and the last 4 or 3 digits of the 12NC catalogue number
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
38
2512 (6432)
1W
+5%
+1%
E24
E24
blister tape
---
---
---
---
Chip Resistors Selection Charts
RL - Thick film low ohmic, high power chip resistors, 0402 / 1206
Global part number - Preferred type
Ordering example: RL0805JR-7W0R01L
RL
0805
J R ― 7W
0R01
L
Series name (code 1-2)
RL=Thick film low ohmic
Default code (code 17)
Resistance (code 12-16)
0R01=0.01Ω
0R1 =0.1Ω
0R2 =0.2Ω
Size code (code 3-6)
(inch / metric)
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6
Taping reel (code 10-11)
Tolerance (code 7)
F = ±1%
G = ±2%
J=±5%
W=7 inch Dia. reel and
7
2 x standard power type
Packing style (code 8 )
R = Paper tape reel
T. C. R. (code 9)
“―” = Based on spec.
(― for thick film only)
Note: 1. All of our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. Letter L is system default code for ordering only
Phycomp worldwide - Traditional type
Size: inch (mm)
Power
Tolerance
Resistance
Packing
Quantity
5 000
+5%
E24
2350 511 15…L
Low ohmic high power chip resistors
0805 (2012)
1/4 W
+1%
E24 / E96
paper tape
2350 511 17…L
1206 (3216)
1/2 W
+5%
E24
+1%
E24 / E96
paper tape
2350 519 01…L
2350 519 1.…L
For ordering rules: See page 14 for E24 / E96 values and the last 4 or 3 digits of the 12NC catalogue number
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
39
Chip Resistors Selection Charts
PT - Thick film low ohmic low T. C. R. chip resistors, 0402 to 2512
Features
• Excellent T. C. R.
• Precision current sensing control
• Excellent performance for current sensing applications
• Low ohmic and high power
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
marking layer
overcoat
protective glass
70
Rated Power (%)
100
resistive layer
80
60
inner electrode
40
20
termination (Ni / matte tin)
155
-55
-40
-20
0
20
40
60
80
100
120
140
inner electrode
ceramic substrate
160
Ambient Temperature ( C)
Dimensions
I1
I1
H
I2
I2
L
W
unit: mm
Type
L
W
H
l1
l2
PT0402
1.00 ±0.10
0.50 ±0.05
0.35 ±0.05
0.20 ±0.10
0.25 ±0.10
PT0603
1.60 ±0.10
0.80 ±0.10
0.45 ±0.10
0.25 ±0.15
0.25 ±0.15
PT0805
2.00 ±0.10
1.25 ±0.10
0.55 ±0.10
0.35 ±0.20
0.35 ±0.20
PT1206
( 50mΩ ≤ R < 75mΩ 3.10 ±0.10
& 91mΩ ≤ R < 1Ω)
1.60 ±0.10
0.55 ±0.10
0.45 ±0.20
0.45 ±0.20
PT1206
(75mΩ≤R<91mΩ)
3.10±0.10
1.60±0.10
0.55±0.10
0.75±0.20
0.45±0.20
PT2010
5.00 ±0.10
2.50 ±0.15
0.55 ±0.10
0.60 ±0.20
0.50 ±0.20
PT2512
6.35 ±0.10
3.20 ±0.15
0.55 ±0.10
0.60 ±0.20
0.50 ±0.20
Note: For relevant physical dimensions, please refer to above construction outlines
Please contact our sales offices, distributors and representatives in your region before ordering
40
Chip Resistors Selection Charts
PT - Thick film low ohmic low T. C. R. chip resistors, 0402 to 2512
Electrical characteristics
Type
Power
P70
Operating Temp.
range
Max.
working voltage
Tolerance
1/8W
50mΩ ≤ R < 68mΩ ±600 ppm/°C
68mΩ ≤ R < 100mΩ ±300 ppm/°C
100mΩ ≤ R < 1Ω ±200 ppm/°C
1/6W
68mΩ ±300 ppm/°C
1/16W
PT0402
50mΩ
50mΩ < R < 68mΩ
68mΩ ≤ R < 100mΩ
100mΩ ≤ R < 1Ω
1/10W
PT0603
1/5W
1/3W
1/8W
PT0805
-55°C to +155°C
(PxR)^1/2
E24 ±2%, ±5%
E24/E96 ±1%
1/4W
1/4W
PT1206
PT2010
PT2512
Resistance range & T. C. R.
Max. resistance
Rated current
5mΩ
3A
0/+400 ppm/°C
0/+350 ppm/°C
0/+300 ppm/°C
Max. resistance
±200 ppm/°C
Rated current
8mΩ
5A
50mΩ 0/+400 ppm/°C
50mΩ < R < 68mΩ 0/+350 ppm/°C
68mΩ 0/+300 ppm/°C
50mΩ
50mΩ < R < 68mΩ
68mΩ ≤ R < 100mΩ
100mΩ ≤ R < 1Ω
0/+350 ppm/°C
0/+300 ppm/°C Max. resistance
0/+250 ppm/°C
Rated current
±100 ppm/°C
50mΩ ≤ R < 75mΩ ±350ppm
75mΩ ≤ R ≤ 100mΩ ±100ppm
100mΩ < R < 1Ω ±75ppm
1/2W
3/4W
100mΩ ±100 ppm/°C
100mΩ < R < 1Ω ±75 ppm/°C
1W
1W
Jumper criteria
2W
5mΩ
6A
Max. resistance
Rated current
5mΩ
10A
Max. resistance
Rated current
-----
Max. resistance
Rated current
-----
Environmental characteristics
Performance test
Test method
Procedure
Requirements
Life
MIL-STD-202Gmethod 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
±(1% +0.0005Ω)
< 20mΩ for jumper
High temperature exposure
MIL-STD-202Gmethod 108A
1 000 hours at maximum operating temperature depending on
specification, unpowered
±(1% +0.0005Ω)
< 20mΩ for jumper
Moisture resistance
MIL-STD-202Gmethod 106F
Each temperature / humidity cycle is defined as 8 hours (method
106F), 3 cycles / 24 hours for 10d with 25°C / 65°C 95% R.H
±(0.5% +0.0005Ω)
< 20mΩ for jumper
Thermal shock
MIL-STD-202Gmethod 107G
LCT / UCT, number of cycles required is 300
Maximum transfer time is 20 seconds
±(1% +0.0005Ω)
< 10mΩ for jumper
Wetting
J-STD-002B
testB
Electrical test not required. Magnification 50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned
(≥95% covered)
No visible damage
Resistance to
soldering heat
MIL-STD-202Gmethod 210F
Lead-free solder, 260°C, 10 seconds immersion time
±(0.5% +0.0005Ω)
No visible damage
< 10mΩ for jumper
MIL-R-55342Dpara 4.7.5
PT standard power:
6.25 times of rated power for 5 seconds at room temperature
PT high power:
5 times of rated power for 5 seconds at room temperature
PT jumper:
2.5 times of rated current for 5 seconds at room temperature
±(1% +0.0005Ω)
No visible damage
< 10mΩ for jumper
Solderability
Short time overload
41
Chip Resistors Selection Charts
PT - Thick film low ohmic low T. C. R. chip resistors, 0402 to 2512
Global part number - Preferred type
Ordering example: PT2512FK-070R01L
PT
2512
F K ―
07
0R01
Series name (code 1-2)
PT = Thick film low ohmic low T. C. R.
Size code (code 3-6)
(inch / metric)
0402 = 1.0 x 0.5
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6
2010 = 5.0 x 2.5
2512 = 6.35 x 3.2
Tolerance (code 7)
F = ± 1%
G = ± 2%
J= ± 5%
“―” for Jumper ordering
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Note: 1. All of our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. Letter L is system default code for ordering only
3. PT series products are available by "Global part number" only
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
42
L
Default code(1/2) (code 17)
Resistance (code 12-16)
0R =Jumper
0R1= 0.1Ω
0R2= 0.2Ω
Taping reel (code 10-11)
07 = 7 inch Dia. reel
13 = 13 inch Dia. reel
W=7 inch Dia. reel and
7
2 x standard power type
T =7 inch Dia. reel and
7
3 x standard power type
T. C. R. (code 9)
“―” = Based on spec.
Chip Resistors Selection Charts
PT - Thick film low ohmic low T. C. R. chip resistors, wide termination, 0815
Features
• Excellent T. C. R.
• Precision current sensing control
• Excellent performance for current sensing applications
• Low ohmic and high power
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
marking layer
protective coat
resistive layer
inner electrode
H
termination (Ni / matte tin)
ceramic substrate
I2
I1
70
Rated Power (%)
100
80
60
W
40
20
155
-55
-40
-20
0
20
40
60
80
100
120
140
160
Ambient Temperature ( C)
L
Dimensions
Type
L
W
H
I1
I2
PT0815
2.00 ±0.10
3.70 ±0.10
0.50 ±0.10
0.35 ±0.20
0.40 ±0.20
43
Chip Resistors Selection Charts
PT - Thick film low ohmic low T. C. R. chip resistors, wide termination, 0815
Electrical characteristics
Type
PT0815
Power
P70
1/2W
1W
Operating Temp.
range
Max.
working voltage
Tolerance
Resistance range & T. C. R.
-55°C to +155°C
(PxR)^1/2
E24 ±2%, ±5%
E24/E96 ±1%
25mΩ ≤ R ≤ 50mΩ ±100 ppm/°C
Environmental characteristics
Performance test
Test method
Procedure
Requirements
Life
MIL-STD-202Gmethod 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
±(1% +0.0005Ω)
High temperature exposure
MIL-STD-202Gmethod 108A
1 000 hours at maximum operating temperature
depending on specification, unpowered
±(1% +0.0005Ω)
Moisture resistance
MIL-STD-202Gmethod 106F
Each temperature / humidity cycle is defined as
8 hours (method 106F), 3 cycles / 24 hours
for 10d with 25°C / 65°C 95% R.H
±(0.5% +0.0005Ω)
Wetting
J-STD-002B
testB
Electrical test not required. Magnification 50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned (≥95% covered)
No visible damage
Resistance to
soldering heat
MIL-STD-202Gmethod 210F
Lead-free solder, 260°C, 10 seconds immersion time
±(0.5% +0.0005Ω)
No visible damage
MIL-R-55342Dpara 4.7.5
PT standard power:
6.25 times of rated power for 5 seconds at room
temperature
PT high power:
5 times of rated power for 5 seconds at room temperature
±(1% +0.0005Ω)
No visible damage
Solderability
Short time overload
44
Chip Resistors Selection Charts
PT - Thick film low ohmic low T. C. R. chip resistors, wide termination, 0815
Global part number - Preferred type
Ordering example: PT0815FK-070R01L
PT
0815
F K ―
07
0R01
Series name (code 1-2)
PT = Thick film low ohmic low T. C. R.
Size code (code 3-6)
(inch / metric)
0815 = 2.00 x 3.70
Tolerance (code 7)
F = ±1%
G = ±2%
J=±5%
Packing style (code 8 )
K = Embossed plastic tape reel
L
Default code(1/2) (code 17)
Resistance (code 12-16)
0R025 = 0.025Ω
0R05 = 0.05Ω
Taping reel (code 10-11)
07 = 7 inch Dia. reel
W=7 inch Dia. reel and
7
2 x standard power type
T. C. R. (code 9)
“―” = base on spec
Note: 1. All of our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. Letter L is system default code for ordering only
3. PT series products are available by "Global part number" only
45
Chip Resistors Selection Charts
PR/PA/PF/PH/PE - Current sensors - low T. C. R. chip resistors, 0402 to 4527
Features
• Excellent T. C. R. compared to thick film low ohmic
• Precision current sensing control
• Excellent performance for current sensing applications
• Ultra low ohmic down to 0.0005Ω
Derating curve
Construction
PR/PA series
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
70
Rated Power (%)
100
80
60
PR series
PE/PF 0603 ~ 4527
40
PA, PH series
PE/PF 0402
20
155
-55
-40
-20
0
20
40
60
80
100
120
140
160
170
180
Ambient Temperature ( C)
Note: construction will be adjusted to resistance
value (only for PF series).
Dimensions
PR series
Type
PR1206
PR2010
PR2512 (1)
PR2512 (2)
PA series
Type
PA2512
Resistance range
1mΩ ≤ R ≤ 6mΩ
1mΩ ≤ R ≤ 3mΩ
4mΩ ≤ R ≤ 100mΩ
1mΩ ≤ R ≤ 2mΩ
3mΩ ≤ R ≤ 5mΩ
0.5mΩ ≤ R ≤ 4mΩ
5mΩ ≤ R ≤ 75mΩ
L
3.20 ±0.25
5.10 ±0.25
5.10 ±0.25
W
1.60 ±0.25
2.54 ±0.25
2.54 ±0.25
6.40 ±0.20
3.20 ±0.20
6.25 ±0.25
3.30 ±0.25
Resistance range
1mΩ ≤ R ≤ 10mΩ
L
6.50 ±0.20
W
3.20 ±0.20
Note: 1. Apply to ordering codes ending in “L”
2. Apply to ordering codes ending in “Z”
Please contact sales offices, distributors and representatives in your region before ordering
46
H
0.64 ±0.25
0.80 ±0.25
0.64 ±0.25
0.75 ±0.15
0.55 ±0.10
0.78 ±0.25
0.64 ±0.25
l1
0.50 ±0.25
1.30 ±0.25
0.80 ±0.25
1.20 ±0.20
0.60 ±0.20
1.88 ±0.25
1.11 ±0.25
unit: mm
l2
0.50 ±0.25
1.30 ±0.25
0.80 ±0.25
1.20 ±0.20
0.60 ±0.20
1.88 ±0.25
1.11 ±0.25
H
0.65 ±0.15
l1
0.90 ±0.20
unit: mm
l2
0.90 ±0.20
Chip Resistors Selection Charts
PR/PA/PF/PH/PE - Current sensors - low T. C. R. chip resistors, 0402 to 4527
Dimensions
PF / PH / PE series
Type
PF / PE0402
PF / PE0603 (2)
PF / PH0805 (1)
PF / PH / PE0805
PF / PH / PE0805 (2)
PF / PH1206 (1)
PF / PH / PE1206 (2)
PF / PE2010
PF2512 (1)
PF / PE2512 (2)
PF / PE4527
Resistance range
10mΩ ≤ R ≤ 50mΩ
5mΩ ≤ R < 100mΩ
10mΩ < R ≤ 50mΩ
3mΩ
4mΩ
5mΩ
6mΩ ≤ R ≤ 7mΩ
8mΩ ≤ R < 100mΩ
10mΩ < R ≤ 50mΩ
3mΩ
4mΩ
5mΩ ≤ R ≤ 8mΩ
9mΩ ≤ R < 100mΩ
5mΩ ≤ R ≤ 9mΩ
10mΩ ≤ R < 100mΩ
6mΩ
7mΩ ≤ R ≤ 15mΩ
20mΩ ≤ R ≤ 50mΩ (1W)
20mΩ ≤ R ≤ 50mΩ (2W)
1mΩ
2mΩ
3mΩ
4mΩ
5mΩ
6mΩ ≤ R ≤ 8mΩ
9mΩ ≤ R < 100mΩ
5mΩ
6mΩ ≤ R <1Ω
L
1.00 ± 0.30
1.60 ± 0.20
2.03 ± 0.25
2.10 ± 0.20
W
0.50 ± 0.20
0.80 ± 0.20
1.27 ± 0.25
1.35 ± 0.20
H
0.45 ± 0.20
0.60 ± 0.15
0.33 ± 0.12
0.65 ± 0.20
l1
0.25 ± 0.10
--0.38 ± 0.25
0.75 ± 0.15
2.00 ± 0.20
1.25 ± 0.20
0.60 ± 0.15
---
3.20 ± 0.25
1.60 ± 0.25
0.60 ± 0.25
0.50 ± 0.25
3.20 ± 0.20
1.60 ± 0.20
0.60 ± 0.15
---
5.00 ± 0.20
2.50 ± 0.20
0.60 ± 0.15
---
6.45 ± 0.25
3.25 ± 0.25
0.70 ±0 .25
6.30 ± 0.20
3.10 ± 0.20
0.60 ± 0.15
---
11.50±0.20
11.50 ± 0.20
7.00±0.20
7.00 ± 0.20
0.60±0.15
0.60 ± 0.15
2.90±0.20
---
0.75 ± 0.25
1.30 ± 0.25
0.75 ± 0.25
unit: mm
l2
--0.30 ± 0.15
0.38 ± 0.25
--0.70 ± 0.15
0.63 ± 0.15
0.55 ± 0.15
0.40 ± 0.15
0.65 ± 0.25
1.30 ± 0.20
1.20 ± 0.20
1.15 ± 0.20
0.58 ± 0.20
1.50 ± 0.20
0.60 ± 0.20
1.85 ± 0.25
1.55 ± 0.25
0.75 ± 0.25
1.30 ± 0.25
2.93 ± 0.20
2.70 ± 0.20
2.50 ± 0.20
2.15 ± 0.20
1.95 ± 0.20
1.90 ± 0.20
0.95 ± 0.20
--2.60 ± 0.20
Note: 1. Apply to ordering codes ending in “L”
2. Apply to ordering codes ending in “Z”
3. For relevant physical dimensions, please refer to above construction outlines
Please contact with sales offices, distributors and representatives in your region before ordering 47
Chip Resistors Selection Charts
PR/PA/PF/PH/PE - Current sensors - low T. C. R. chip resistors, 0402 to 2512
Electrical characteristics
Type
Technology
Size
0402
0603
0805
PE
Metal Foil
1206
2010
2512
4527
0402
0603
0805
PF
Metal Foil
1206
2010
2512
4527
PH
Metal Foil
0805
1206
Power Operating Temp.
Max.
Tolerance
P70
range
working voltage
1/16W
1/8W -55°C to 155°C
1/4W
1/10W
1/5W
1/3W
2/5W
1/2W
1/8W
1/4W
1/3W
±1%
1/2W
(PxR)^1/2
±2%
±5%
1/4W
-55°C to 170°C
1/2W
1W
1/2W
1W
1W
2W
3W
2W
3W
5W
1/16W
1/8W -55°C to 155°C
1/4W
1/10W
1/5W
1/3W
2/5W
1/2W
1/8W
1/4W
1/3W
±1%
(PxR)^1/2
±2%
1/2W
±5%
1/4W
-55°C to 170°C
1/2W
1W
1/2W
1W
1W
2W
3W
2W
3W
5W
4/5W
-55°C to 155°C
(PxR)^1/2
±1%, ±2%, ±5%
1W
Note: Please contact with sales offices, distributors and representatives in your region before ordering
48
Resistance range
Min.
T. C. R.
10mΩ ≤ R ≤ 50mΩ
±100 ppm/°C
5mΩ ≤ R<100mΩ
3mΩ ≤ R<100mΩ
3mΩ ≤ R<100mΩ
±50 ppm/°C
±75 ppm/°C
±100 ppm/°C
5mΩ ≤ R<100mΩ
6mΩ ≤ R<100mΩ
5mΩ ≤ R<1Ω
10mΩ ≤ R ≤ 50mΩ
±100 ppm/°C
5mΩ ≤ R < 100mΩ
3mΩ ≤ R < 100mΩ
3mΩ ≤ R < 100mΩ
5mΩ ≤ R < 100mΩ
6mΩ ≤ R < 100mΩ
5mΩ ≤ R < 1Ω
4mΩ ≤ R ≤ 50mΩ
±50 ppm/°C
±75 ppm/°C
±100 ppm/°C
Chip Resistors Selection Charts
PR/PA/PF/PH/PE - Current sensors - low T. C. R. chip resistors, 0402 to 4527
Electrical characteristics
Type
Technology
Size
1206
2010
PR
Power Operating Temp.
Max.
Tolerance
Resistance range
P70
range
working voltage
1/4W
1/2W
±1%, ±2%, ±5% 1mΩ ≤ R ≤ 6mΩ
1W
1/2W
±1%, ±2%, ±5% 1mΩ ≤ R < 100mΩ
1W
±0.5%
7mΩ ≤ R ≤ 75mΩ
1W
Metal Plate
-55°C to 170°C
(PxR)^1/2
±1%, ±2%, ±5%
±0.5%
2512
2W
PA
Metal Plate
2512
3W
1W
2W
3W
±1%, ±2%, ±5%
-55°C to 155°C
Min.
T. C. R.
±50 ppm/°C
0.5mΩ ≤ R ≤ 2mΩ
±200 ppm/°C
3mΩ ≤ R ≤ 5mΩ
±100 ppm/°C
7mΩ ≤ R ≤ 75mΩ
±50 ppm/°C
0.5mΩ ≤ R ≤ 2mΩ
±200 ppm/°C
3mΩ ≤ R ≤ 5mΩ
±100 ppm/°C
±1%, ±2%, ±5% 0.5mΩ ≤ R ≤ 10mΩ
±50 ppm/°C
1mΩ ≤ R ≤ 10mΩ
±100 ppm/°C
(PxR)^1/2
±1%, ±5%
Note: Please contact with sales offices, distributors and representatives in your region before ordering
Environmental characteristics
Performance test
Test method
Procedure
Requirements
Life
MIL-STD-202Gmethod 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
±(1% +0.0005Ω)
High temperature exposure
MIL-STD-202Gmethod 108A
1 000 hours at maximum operating temperature depending on
specification, unpowered
±(1% +0.0005Ω)
Moisture resistance
MIL-STD-202Gmethod 106F
Each temperature / humidity cycle is defined as 8 hours (method
106F), 3 cycles / 24 hours for 10d with 25°C / 65°C 95% R.H
±(0.5% +0.0005Ω)
Thermal shock
MIL-STD-202Gmethod 107G
LCT / UCT, number of cycles required is 300
Maximum transfer time is 20 seconds
±(0.5% +0.0005Ω)
Wetting
J-STD-002B
testB
Electrical test not required. Magnification 50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned
(≥95% covered)
Resistance to
soldering heat
MIL-STD-202Gmethod 210F
Lead-free solder, 260°C, 10 seconds immersion time
±(0.5% +0.0005Ω)
No visible damage
MIL-R-55342Dpara 4.7.5
5 times of rated power for 5 seconds at room temperature
±(0.5% +0.0005Ω)
No visible damage
Solderability
Short time overload
49
Chip Resistors Selection Charts
PR/PA/PF/PH/PE - Current sensors - low T. C. R. chip resistors, 0402 to 2512
Global part number - Preferred type
Ordering example: PF2512FKF070R01L
PF
2512
F K
F
07
0R01
L
Series name (code 1-2)
PR/PA/PF/PH/PE = Current sensors - low T. C. R.
Default code(1/2) (code 17)
L / Z = Default code
Size code (code 3-6)
(inch / metric)
0402 = 1.0 x 0.5
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6
2010 = 5.0 x 2.5
2512 = 6.35 x 3.2
4527 = 11.0 x 7.0
Resistance (code 12-16)
0U5=0.0005Ω
0R01=0.01Ω
0R1 =0.1Ω
0R2 =0.2Ω
Taping reel (code 10-11)
07 =7 inch Dia. reel
7W=7 inch Dia. reel
2 x standard power type
7T =7 inch Dia. reel
3 x standard power type
47 =7 inch Dia. reel
4 x standard power type
57 =7 inch Dia. reel
5 x standard power type
Tolerance (code 7)
F = ±1%
G = ±2%
J=±5%
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
T. C. R. (code 9)
E = ±50 ppm/°C
M=±75 ppm/°C
F=±100 ppm/°C
G=±200 ppm/°C
Note: 1. All of our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. PH series products are available by "Global part number" only
Phycomp worldwide - Traditional type
Current Sensor - Low T. C. R. / PR series
Size: inch (mm)
2010 (5025)
2512 (6432)
Power
1/2 W
1W
1W
2W
Tolerance
+5%
+1%
+5%
+1%
+5%
+1%
+5%
+1%
Packing
blister tape
blister tape
Quantity
4 000 2322 760 63..0L 2322 761 11.. 0L 2322 760 65.. 0L 2322 761 13.. 0L 2322 762 94..0L 2322 763 95..0L 2322 762 10..0L 2322 763 10..0L
For ordering rules: See page 14 for E24 / E96 values and the last 4 or 3 digits of the 12NC catalogue number
Phycomp worldwide - Traditional type
Size: inch (mm)
Power
Tolerance
Packing
Quantity 4 000
+5%
2322 764 96..L
Current Sensor - Low T. C. R. / PF series
2512 (6432)
1W
+1%
blister tape
2322 764 97..L
For ordering rules: See page 14 for E24 / E96 values and the last 4 or 3 digits of the 12NC catalogue number
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
50
2W
+5%
+1%
2322 764 10..L
2322 764 30..L
Chip Resistors Selection Charts
PE/PF - Current sensors - low T. C. R. chip resistors, wide termination, 0612 to 0830
Features
• Excellent T. C. R. compared to thick film low ohmic
• Precision current sensing control
• Excellent performance for current sensing applications
• Low ohmic and high power
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
70
Rated Power (%)
100
80
60
40
20
170
-55
-40
-20
0
20
40
60
80
100
120
140
160
180
Ambient Temperature ( C)
Dimensions
Type
PE / PF0612 (2)
Resistance range
L
W
H
l1
l2
1mΩ
1.60 ±0.20
0.32 ±0.20
0.60 ±0.15
---
0.55±0.20
2mΩ ≤ R ≤ 4mΩ
1.60 ±0.20
0.32 ±0.20
0.60 ±0.15
---
0.40±0.20
5mΩ ≤ R ≤ 300mΩ
1.60 ±0.20
0.32 ±0.20
0.60 ±0.15
---
0.30±0.15
1mΩ
2.50±0.20
3.70±0.20
0.60±0.15
---
0.95±0.20
2mΩ
2.50±0.20
3.70±0.20
0.60±0.15
---
0.75±0.20
3mΩ ≤ R ≤ 100mΩ
2.50±0.20
3.70±0.20
0.60±0.15
---
0.60±0.20
PE / PF0815 (1)
10 / 15 / 20mΩ
2.15 ±0.20
3.75 ±0.25
0.65 ±0.25
0.65 ±0.25
0.70 ±0.25
6 / 8 / 10mΩ
2.00 ±0.20
7.50 ±0.30
0.60 ±0.15
---
0.60 ±0.15
PE / PF0830 (2)
1mΩ ≤ R ≤ 100mΩ
(except 6/8/10mΩ)
2.50 ±0.20
7.50 ±0.30
0.60 ±0.15
---
0.58 ±0.15
PE / PF0815 (2)
Note: 1. Apply to ordering codes ending in “L”
2. Apply to ordering codes ending in “Z”
Please contact sales offices, distributors and representatives in your region before ordering
51
Chip Resistors Selection Charts
PE/PF - Current sensors - low T. C. R. chip resistors, wide termination, 0612 to 0830
Electrical characteristics
Type
Technology
Size
0612
PF
Metal Foil
wide termination
0815
0830
0612
PE
Metal Foil
wide termination
0815
0830
Power
P70
1W
2W
1/2W
1W
2W
3W
1W
2W
1/2W
1W
2W
3W
Operating Temp.
range
Max.
working voltage
Tolerance
-55°C to 170°C
(PxR)^1/2
±1%, ±2%, ±5%
1mΩ ≤ R ≤ 300mΩ
1mΩ ≤ R ≤ 100mΩ
1mΩ ≤ R ≤ 100mΩ
±75 ppm/°C
±100 ppm/°C
-55°C to 170°C
(PxR)^1/2
±1%, ±2%, ±5%
1mΩ ≤ R ≤ 300mΩ
1mΩ ≤ R ≤ 100mΩ
1mΩ ≤ R ≤ 100mΩ
±75 ppm/°C
±100 ppm/°C
Resistance range & T. C. R.
Note: Please contact with sales offices, distributors and representatives in your region before ordering
Environmental characteristics
Performance test
Test method
Procedure
Requirements
Life
MIL-STD-202Gmethod 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
±(1% +0.0005Ω)
High temperature exposure
MIL-STD-202Gmethod 108A
1 000 hours at maximum operating temperature
depending on specification, unpowered
±(1% +0.0005Ω)
Moisture resistance
MIL-STD-202Gmethod 106F
Each temperature / humidity cycle is defined as
8 hours (method 106F), 3 cycles / 24 hours
for 10d with 25°C / 65°C 95% R.H
±(0.5% +0.0005Ω)
Wetting
J-STD-002B testB
Electrical test not required. Magnification 50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned
(≥95% covered)
Resistance to
soldering heat
MIL-STD-202Gmethod 210F
Lead-free solder, 260°C, 10 seconds immersion time
±(0.5% +0.0005Ω)
No visible damage
MIL-R-55342Dpara 4.7.5
5 times of rated power for 5 seconds at room temperature
±(0.5% +0.0005Ω)
No visible damage
Solderability
Short time overload
52
Chip Resistors Selection Charts
PE/PF - Current sensors - low T. C. R. chip resistors, wide termination, 0612 to 0830
Global part number - Preferred type
Ordering example: PF0815FKF070R01L
PF
0815
F K
F
07
0R01
Series name (code 1-2)
PE /PF = current sensors - low T. C. R.,
wide termination
Size code (code 3-6)
(inch / metric)
0612 = 1.6 x 3.2
0815 = 2.15 x 3.75
0830 = 2.0 x 7.5
Tolerance (code 7)
F = ±1%
G = ±2%
J=±5%
L
Default code(1/2) (code 17)
L / Z = Default code
Resistance (code 12-16)
0R01 = 0.01Ω
0R02 = 0.02Ω
Taping reel (code 10-11)
07 =7 inch Dia. reel
7W=7 inch Dia. reel
2 x standard power type
T. C. R. (code 9)
M = ±75 ppm/°C
F=±100 ppm/°C
Packing style (code 8 )
K = Embossed plastic tape reel
Note: 1. All of our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. PF series wide termination type products are available by "Global part number" only
53
Chip Resistors Selection Charts
PS - Current sensors - low T.C.R. chip resistors, 4 termination, 0306 to 1225
Features
• Excellent T. C. R. compared to thick film low ohmic
• Precision current sensing control
• Excellent performance for current sensing applications
• Ultra-low resistance and narrow tolerance are suitable for
current detection
Derating curve
Construction
Marking Coating
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
H
Protective coat
Resistor Layer
Ceramic substrate
70
100
Rated Power (%)
Terminal electrode
80
PS0306 / PS0508 / PS0612
60
0508, 0612, 1225
L
40
a
0306
20
155
-55
-40
-20
0
20
40
60
80
100
120
140
160
C
D
170
180
Ambient Temperature ( C)
W
PS1225
W
R010
B
B
2
1
A
4
3
A
L
Top
Bottom
Dimensions
Type
L
W
a
D
c
H
PS0306
0.80±0.20
1.60±0.20
0.25±0.20
0.30±0.15
0.30±0.15
0.55±0.20
PS0508
1.25±0.20
2.00±0.20
0.25±0.20
0.20±0.15
0.30±0.20
0.55±0.20
PS0612
1.50±0.25
3.15±0.25
0.35±0.20
0.38±0.20
0.66±0.20
0.75±0.25
Type
L
W
A
B
H
PS1225
3.10±0.20
6.30±0.20
0.80±0.20
2.20±0.20
0.60±0.15
Note: Apply to ordering codes ending in “Z”
Please contact sales offices, distributors and representatives in your region before ordering
54
Chip Resistors Selection Charts
PS - Current sensors - low T.C.R. chip resistors, 4 termination, 0306 to 1225
Electrical characteristics
Type
Technology
Size
0306
0508
PS
Metal Foil
4 termination
Power
P70
1/8W
1/4W
1/8W
1/4W
1/2W
Operating Temp.
range
Max.
working voltage
Tolerance
Resistance range & T. C. R.
-55°C to 155°C
10mΩ ≤ R ≤ 50mΩ
-55°C to 170°C
(PxR)^1/2
0612
1W
-55°C to 170°C
1225
3W
-55°C to 170°C
±1%, ±5%
±75 ppm/°C
±100 ppm/°C
0.5mΩ, 0.75mΩ ±700 ppm/°C
1mΩ ≤ R ≤ 2mΩ ±400 ppm/°C
3mΩ ≤ R ≤ 5mΩ ±150 ppm/°C
4mΩ ≤ R ≤ 50mΩ
±75 ppm/°C
±100 ppm/°C
Note: Please contact with sales offices, distributors and representatives in your region before ordering
Environmental characteristics
Performance test
Test method
Procedure
Requirements
Life
MIL-STD-202Gmethod 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
±(1% +0.0005Ω)
High temperature exposure
MIL-STD-202Gmethod 108A
1 000 hours at maximum operating temperature
depending on specification, unpowered
±(1% +0.0005Ω)
Moisture resistance
MIL-STD-202Gmethod 106F
Each temperature / humidity cycle is defined as
8 hours (method 106F), 3 cycles / 24 hours
for 10d with 25°C / 65°C 95% R.H
±(0.5% +0.0005Ω)
Wetting
J-STD-002B testB
Electrical test not required. Magnification 50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned
(≥95% covered)
Resistance to
soldering heat
MIL-STD-202Gmethod 210F
Lead-free solder, 260°C, 10 seconds immersion time
±(0.5% +0.0005Ω)
No visible damage
MIL-R-55342Dpara 4.7.5
5 times of rated power for 5 seconds at room temperature
±(0.5% +0.0005Ω)
No visible damage
Solderability
Short time overload
55
Chip Resistors Selection Charts
PS - Current sensors - low T.C.R. chip resistors, 4 termination, 0306 to 1225
Global part number - Preferred type
Ordering example: PS0612FKF070R01L
PS
0612
F K
F
07
0R01
Series name (code 1-2)
PS = current sensors - low T.C.R., 4 termination
Size code (code 3-6)
(inch / metric)
0306 = 0.8 x 1.6
0508 = 1.25 x 2.0
0612 = 1.6 x 3.2
1225 = 3.2 x 6.35
Tolerance (code 7)
F = ±1%
J =±5%
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Note: 1. All of our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. PS series 4 termination type products are available by "Global part number" only
56
L
Default code(1/2) (code 17)
Z = Default code
Resistance (code 12-16)
0U5 = 0.0005Ω
0R01 = 0.01Ω
0R02 = 0.02Ω
Taping reel (code 10-11)
07 =7 inch Dia. reel
7W = 7 inch Dia. reel
2 x standard power type
7T = 7 inch Dia. reel
3 x standard power type
T. C. R. (code 9)
M = ±75 ppm/°C
F=±100 ppm/°C
L = ±150 ppm/°C
P = ±400 ppm/°C
Q = ±700 ppm/°C
Chip Resistors Selection Charts
AR - NiAu termination chip resistors, 0402 to 1206
Features
• New NiAu terminations provide special application for
hybrid board gluing
• Competitive with AgPd terminations
• Special use in high temperature environment
• Higher component and equipment reliability
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
overcoat
protective glass
70
100
Rated Power (%)
marking layer
resistive layer
(jumper chip is a conductor)
80
60
inner electrode
40
20
termination (Ni / Au / Pd)
155
-55
-40
-20
0
20
40
60
80
100
120
140
160
ceramic substrate
Ambient Temperature ( C)
Dimensions
I1
I1
H
I2
I2
L
W
Type
L
W
H
I1
I2
AR0402
1.00 ±0.05
0.50 ±0.05
0.35 ±0.05
0.20 ±0.10
0.25 ±0.10
AR0603
1.60 ±0.10
0.80 ±0.10
0.45 ±0.10
0.25 ±0.15
0.25 ±0.15
AR0805
2.00 ±0.10
1.25 ±0.10
0.50 ±0.10
0.35 ±0.20
0.35 ±0.20
AR1206
3.10 ±0.10
1.60 ±0.10
0.55 ±0.10
0.45 ±0.20
0.40 ±0.20
unit: mm
57
Chip Resistors Selection Charts
AR - NiAu termination chip resistors, 0402 to 1206
Electrical characteristics
Type
Power Operating Temp.
MWV RCOV DWV
range
P70
AR0402 1/16W -55°C to +155°C
50V
100V
100V
AR0603 1/10W -55°C to +155°C
50V
100V
100V
AR0805
1/8W
-55°C to +155°C 150V
300V
300V
AR1206
1/4W
-55°C to +155°C 200V
500V
500V
Resistance range & tolerance
T. C. R.
( ppm/°C)
Jumper criteria
(unit: A)
Rated current 1.0
Max. current 2.0
E24 ±5% 1Ω ≤ R ≤ 10MΩ
E24/E96 ±1% 1Ω ≤ R ≤ 10MΩ 10Ω < R ≤ 10MΩ ±100
1Ω ≤ R ≤ 10Ω ±200
Jumper < 50MΩ
Rated current 1.0
Max. current 2.0
Rated current 2.0
Max. current 5.0
Rated current 2.0
Max. current 10.0
Environmental characteristics
Performance test
Test method
Procedure
Requirements
Life
MIL-STD-202Gmethod 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
±(2% +0.05Ω)
< 100mΩ for jumper
High temperature exposure
MIL-STD-202Gmethod 108A
1 000 hours at maximum operating temperature
depending on specification, unpowered
±(1% +0.05Ω)
< 50mΩ for jumper
Moisture resistance
MIL-STD-202Gmethod 106F
Each temperature / humidity cycle is defined as 8 hours
(method 106F), 3 cycles / 24 hours for 10d with
25°C / 65°C 95% R.H
±(2% +0.05Ω)
< 100mΩ for jumper
Thermal shock
MIL-STD-202Gmethod 107G
LCT / UCT, number of cycles required is 300
Maximum transfer time is 20 seconds
±(0.5% +0.05Ω) for
10K to 10M
±(1% +0.05Ω) for others
< 50mΩ for jumper
Wetting
J-STD-002B
testB
Electrical test not required. Magnification 50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned (≥95% covered)
No visible damage
Resistance to
soldering heat
MIL-STD-202Gmethod 210F
Lead-free solder, 260°C, 10 seconds immersion time
±(1% +0.05Ω)
< 50mΩ for jumper
No visible damage
MIL-R-55342Dpara 4.7.5
2.5 times RCWV or maximum overload voltage whichever is less for 5 seconds at room temperature
±(2% +0.05Ω)
< 50mΩ for jumper
No visible damage
Solderability
Short time overload
58
Chip Resistors Selection Charts
AR - NiAu termination chip resistors, 0402 to 1206
Global part number - Preferred type for ordering Yageo / Phycomp branded products
Ordering example: AR0603JR-07100KL
AR
0603
J R ―
07
100K
Series name (code 1-2)
AR = NiAu termination
Size code (code 3-6)
(inch / metric)
0402 = 1.0 x 0.5
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6
Tolerance (code 7)
F = ±1%
J=±5% (for Jumper ordering)
L
Default code(1/2) (code 17)
Resistance (code 12-16)
0R = Jumper
10R =10Ω
100R=100Ω
100K=100KΩ
Taping reel (code 10-11)
07 = 7 inch Dia. reel
T. C. R. (code 9)
“―” = Based on spec.
(― for thick film only)
Packing style (code 8 )
R = Paper tape reel
Note: 1. All of our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. Letter L is system default code for ordering only
Phycomp worldwide - Traditional type
Chip resistors with Ni/Au terminations
Size: inch (mm)
0402 (1005)
0603 (1608)
0805 (2012)
1206 (3216)
Power
1/16 W
1/10 W
1/8 W
1/4 W
Tolerance
+5%
+1%
+5%
+1%
+5%
+1%
+5%
+1%
Resistance
E24
E24 / E96
E24
E24 / E96
E24
E24 / E96
E24
E24 / E96
Packing
paper tape
paper tape
paper tape
paper tape
----2322 702 11…L 2322 704 1.…L 2322 730 11… 2322 734 1.…L 2322 711 11...L 2322 729 1.…L
Quantity 5 000
------------10 000 2322 705 12…L 2322 706 2….
----2322 702 19001L
--2322 730 19001L
--2322 711 19001L
--Jumper 5 000
--------------10 000 2322 705 19001 L
For ordering rules: See page 14 for E24 / E96 values and the last 4 or 3 digits of the 12NC catalogue number
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 13 for details.
59
Chip Resistors Selection Charts
SR - Surge chip resistors, 0402 to 2512
Features
• Reduced size of final equipment
• Low assembly costs
• Higher component and equipment reliability
• Excellent performance at pulse loading
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
marking layer
overcoat
protective glass
70
Rated Power (%)
100
resistive layer
80
60
inner electrode
40
termination (Ni / matte tin)
20
155
-55
-40
-20
0
20
40
60
80
100
120
140
inner electrode
ceramic substrate
160
Ambient Temperature ( C)
Dimensions
I1
I1
H
I2
I2
L
60
W
unit: mm
Type
L
W
H
I1
I2
SR0402
1.00±0.05
0.50±0.05
0.35±0.05
0.20±0.10
0.25±0.10
SR0603
1.60±0.10
0.80±0.10
0.45±0.10
0.25±0.15
0.25±0.15
SR0805
2.00 ±0.10
1.25 ±0.10
0.50 ±0.10
0.35 ±0.20
0.35 ±0.20
SR1206
3.10 ±0.10
1.60 ±0.10
0.55 ±0.10
0.45 ±0.20
0.40 ±0.20
SR1218
3.10 ±0.10
4.60 ±0.10
0.55 ±0.10
0.45 ±0.20
0.40 ±0.20
SR2010
5.00 ±0.10
2.50 ±0.15
0.55 ±0.10
0.55 ±0.15
0.50 ±0.20
SR2512
6.35 ±0.10
3.10 ±0.15
0.55 ±0.10
0.60 ±0.20
0.50 ±0.20
Chip Resistors Selection Charts
SR - Surge chip resistors, 0402 to 2512
Electrical characteristics
Power
P70
Operating Temp.
range
MWV
RCOV
DWV
1/16W
-55°C to +155°C
50V
100V
100V
1/8W
-55°C to +155°C
50V
100V
100V
1/10W
-55°C to +155°C
50V
100V
100V
1/5W
-55°C to +155°C
50V
100V
100V
1/8W
-55°C to +155°C
150V
300V
300V
1/4W
-55°C to +155°C
150V
300V
300V
1/4W
-55°C to +155°C
200V
400V
500V
1/2W
-55°C to +155°C
200V
400V
500V
SR1218
1W
-55°C to +155°C
200V
400V
500V
SR2010
3/4W
-55°C to +155°C
200V
400V
500V
SR2512
1W
-55°C to +155°C
200V
400V
500V
Type
SR0402
SR0603
SR0805
SR1206
Resistance range & tolerance
T. C. R.
E24 ±5%, ±10%, ±20% 1Ω ≤ R ≤ 100KΩ
±200 ppm/°C
Environmental characteristics
Performance test
Test method
Procedure
Requirements
Life
MIL-STD-202Gmethod 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
±(3% +0.05Ω)
High temperature exposure
MIL-STD-202Gmethod 108A
1 000 hours at maximum operating temperature
depending on specification, unpowered
±(3% +0.05Ω)
Wetting
J-STD-002B
testB
Electrical test not required. Magnification 50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned (≥95% covered)
No visible damage
Resistance to
soldering heat
MIL-STD-202Gmethod 210F
Lead-free solder, 260°C, 10 seconds immersion time
±(1% +0.05Ω)
No visible damage
MIL-R-55342Dpara 4.7.5
2.5 times RCWV or maximum overload voltage whichever is less for 5 seconds at room temperature
±(2% +0.05Ω)
No visible damage
Solderability
Short time overload
Pulse-Load behavior
10 4
One-Pulse limiting electric power (W)
10 3
10 2
10 1
2512
2010
1218
1
1210
1206
0805
0603
10 -1
10 -2
0402
10 -1
1
10 1
10 2
10 3
Pulse duration (ms)
61
Chip Resistors Selection Charts
SR - Surge chip resistors, 0402 to 2512
Global part number - Preferred type for ordering Yageo / Phycomp branded products
Ordering example: SR0805MR-07100KL
SR
0805
M R ―
07
100K
L
Default code(1/2) (code 17)
Series name (code 1-2)
SR = Surge
Resistance (code 12-16)
10R =10Ω
100K=100KΩ
Size code (code 3-6)
(inch / metric)
0402 = 1.0 x 0.5
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6
1218 = 3.2 x 4.5
2010 = 5.0 x 2.5
2512 = 6.35 x 3.2
Taping reel (code 10-11)
7W = 7 inch Dia. reel
2 x standard power type
07 = 7 inch Dia. reel
10 = 10 inch Dia. reel
13 = 13 inch Dia. reel
Tolerance (code 7)
J=±5%
K=±10%
M = ±20%
T. C. R. (code 9)
“―” = Based on spec.
(― for thick film only)
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Note: 1. All of our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. Letter L is system default code for ordering only
Phycomp worldwide - Traditional type
Size: inch (mm)
Power
Tolerance
Resistance
Packing
Quantity
4 000
5 000
1206 (3216)
1/4 W
+5%
E24
paper tape
Surge chip resistors
1218 (3248)
1W
+10%
E24
paper tape
---
---
2350 554 12…L
2350 550 10…L
0805 (2012)
1/8 W
+10%
E24
paper tape
+5%
E24
paper tape
2512 (6432)
1W
+10%
E24
paper tape
+20%
E24
paper tape
2350 557 10…L
2350 556 11…L
2350 556 10…L
2350 556 13…L
---
---
---
---
For ordering rules: See page 14 for E24 / E96 values and the last 4 or 3 digits of the 12NC catalogue number
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
62
Chip Resistors Selection Charts
RV - High voltage chip resistors, 0603 to 2512
Features
• Higher maximum working voltage compared to RC series
• Extremely thin and light
• Reliable electrode construction
• Compatible with lead containing and lead-free soldering
processes
• Highly stable in auto-placement surface mounting
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
marking layer
overcoat
protective glass
70
Rated Power (%)
100
resistive layer
80
60
inner electrode
40
termination (Ni / matte tin)
20
155
-55
-40
-20
0
20
40
60
80
100
120
140
inner electrode
ceramic substrate
160
Ambient Temperature ( C)
Dimensions
I1
I1
H
I2
I2
L
W
Type
L
W
H
I1
I2
RV0603
1.60 ±0.10
0.80 ±0.10
0.45 ±0.10
0.25 ±0.15
0.25 ±0.15
RV0805
2.00 ±0.10
1.25 ±0.10
0.50 ±0.10
0.35 ±0.20
0.35 ±0.20
RV1206
3.10 ±0.10
1.60 ±0.10
0.55 ±0.10
0.40 ±0.20
0.45 ±0.20
RV2512
6.35 ±0.10
3.10 ±0.15
0.55 ±0.10
0.60 ±0.20
0.50 ±0.20
unit: mm
63
Chip Resistors Selection Charts
RV - High voltage chip resistors, 0603 to 2512
Electrical characteristics
Type
Power
P70
Operating Temp.
range
MWV
RCOV
DWV
RV0603
1/10W
-55°C to +155°C
350V
500V
500V
E24 ±5%
10KΩ ≤ R ≤ 1MΩ
E24/E96 ±1%
RV0805
1/8W
-55°C to +155°C
400V
800V
800V
E24 ±5%
100KΩ ≤ R ≤ 10MΩ
E24/E96 ±1%
RV1206
1/4W
-55°C to +155°C
500V
1000V
1000V
E24 ±5% 100KΩ ≤ R ≤ 27MΩ
E24/E96 ±1% 100KΩ ≤ R ≤ 10MΩ
RV2512
1W
-55°C to +155°C
500V
1000V
1000V
E24 ±5% 4.7MΩ ≤ R ≤ 16MΩ
Resistance range & tolerance
T. C. R.
±200 ppm/°C
Environmental characteristics
Performance test
Test method
Procedure
Requirements
Life
MIL-STD-202Gmethod 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
±(2% +0.05Ω)
High temperature exposure
MIL-STD-202Gmethod 108A
1 000 hours at maximum operating temperature
depending on specification, unpowered
±(1% +0.05Ω)
Moisture resistance
MIL-STD-202Gmethod 106F
Each temperature / humidity cycle is defined as
8 hours (method 106F), 3 cycles / 24 hours
for 10d with 25°C / 65°C 95% R.H
±(2% +0.05Ω)
Thermal shock
MIL-STD-202Gmethod 107G
LCT / UCT, number of cycles required is 300
Maximum transfer time is 20 seconds
±(0.5% +0.05Ω) for 10K to 10M
±(1% +0.05Ω) for others
Wetting
J-STD-002B
testB
Electrical test not required. Magnification 50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned (≥95% covered)
No visible damage
Resistance to
soldering heat
MIL-STD-202Gmethod 210F
Lead-free solder, 260°C, 10 seconds immersion time
±(1% +0.05Ω)
No visible damage
MIL-R-55342Dpara 4.7.5
2.5 times RCWV or maximum overload voltage whichever is less for 5 seconds at room temperature
±(2% +0.05Ω)
No visible damage
Solderability
Short time overload
64
Chip Resistors Selection Charts
RV - High voltage chip resistors, 0603 to 2512
Global part number - Preferred type for ordering Yageo / Phycomp branded products
Ordering example: RV0805JR-07100KL
RV
0805
J R ―
07
100K
L
Default code(1/2) (code 17)
Series name (code 1-2)
RV = High voltage
Resistance (code 12-16)
100K=100KΩ
1M =1MΩ
Size code (code 3-6)
(inch / metric)
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6
2512 = 6.35 x 3.2
Taping reel (code 10-11)
07 = 7 inch Dia. reel
Tolerance (code 7)
F = ±1%
J=±5%
T. C. R. (code 9)
“―” = Based on spec.
(― for thick film only)
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Note: 1. All of our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. Letter L is system default code for ordering only
Phycomp worldwide - Traditional type
High voltage chip resistors
Size: inch (mm)
Power
Tolerance
Resistance
Packing
Quantity
4 000
5 000
0805 (2012)
1/8 W
+5%
E24
1206 (3216)
1/4 W
+1%
E24 / E96
+5%
E24
---
---
---
---
2322 762 98...L
2322 792 61...L
2322 793 6....L
2322 790 61...L
2322 791 6....L
---
paper tape
+1%
E24 / E96
2512 (6432)
1W
+5%
E24
blister tape
paper tape
For ordering rules: See page 14 for E24 / E96 values and the last 4 or 3 digits of the 12NC catalogue number
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
65
Chip Resistors Selection Charts
TR - Trimmable chip resistors, 0402 to 1206
Features
• Reduced size of final equipment
• Low assembly costs
• Higher component and equipment reliability
• Improved performance at high frequency
• Low noise, when not trimmed
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
overcoat
resistive layer
70
Rated Power (%)
100
inner electrode
80
termination
60
ceramic substrate
TR0805TR1206
40
TR0402TR0603
20
155
125
-55
-40
-20
0
20
40
60
80
100
120
140
160
Ambient Temperature ( C)
Dimensions
I1
I1
H
I2
I2
L
66
W
unit: mm
Type
L
W
H
I1
I2
TR0402
1.00 ±0.10
0.50 ±0.05
0.35 ±0.05
0.20 ±0.10
0.25 ±0.10
TR0603
1.60 ±0.10
0.80 ±0.10
0.45 ±0.10
0.25 ±0.15
0.25 ±0.15
TR0805
2.00 ±0.10
1.25 ±0.10
0.50 ±0.10
0.35 ±0.20
0.35 ±0.20
TR1206
3.10 ±0.10
1.60 ±0.10
0.55 ±0.10
0.45 ±0.20
0.40 ±0.20
Chip Resistors Selection Charts
TR - Trimmable chip resistors, 0402 to 1206
Electrical characteristics
Type
Power
P70
Operating Temp.
range
MWV
RCOV
DWV
100V
TR0402
1/16W
-55°C to +125°C
50V
100V
TR0603
1/16W
-55°C to +125°C
50V
100V
100V
TR0805
1/8W
-55°C to +155°C
150V
300V
500V
TR1206
1/4W
-55°C to +155°C
200V
500V
500V
Resistance range & tolerance
T. C. R.
( ppm/°C)
E24 +0/-10%, +0/-20%, +0/-30% 1Ω ≤ R ≤ 10MΩ
1Ω ≤ R ≤ 10Ω ±200
10Ω < R ≤ 1MΩ ±100
1MΩ < R ≤ 10MΩ ±200
Environmental characteristics
Performance test
Test method
Procedure
Requirements
Life
MIL-STD-202Gmethod 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
±(1% +0.05Ω)
High temperature exposure
MIL-STD-202Gmethod 108A
1 000 hours at maximum operating temperature
depending on specification, unpowered
±(1% +0.05Ω)
Moisture resistance
MIL-STD-202Gmethod 106F
Each temperature / humidity cycle is defined as
8 hours (method 106F), 3 cycles / 24 hours
for 10d with 25°C / 65°C 95% R.H
±(2% +0.05Ω)
Thermal shock
MIL-STD-202Gmethod 107G
LCT / UCT, number of cycles required is 300
Maximum transfer time is 20 seconds
±(1% +0.05Ω)
Wetting
J-STD-002B
testB
Electrical test not required. Magnification 50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned (≥95% covered)
No visible damage
Resistance to
soldering heat
MIL-STD-202Gmethod 210F
Lead-free solder, 260°C, 10 seconds immersion time
±(1% +0.05Ω)
No visible damage
MIL-R-55342Dpara 4.7.5
2.5 times RCWV or maximum overload voltage
whichever is less for 5 seconds at room temperature
±(1% +0.05Ω)
No visible damage
Solderability
Short time overload
67
Chip Resistors Selection Charts
TR - Trimmable chip resistors, 0402 to 1206
Global part number - Preferred type for ordering Yageo / Phycomp branded products
Ordering example: TR0603MR-07100KL
TR
M R ―
0603
07
100K
L
Default code(1/2) (code 17)
Series name (code 1-2)
TR = Trimmable
Resistance (code 12-16)
10R =10Ω
100R=100Ω
100K=100KΩ
Size code (code 3-6)
(inch / metric)
0402 = 1.0 x 0.5
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6
Taping reel (code 10-11)
07 = 7 inch Dia. reel
Tolerance (code 7)
K=0/-10%
M=0/-20%
N=0/-30%
T. C. R. (code 9)
“―” = Based on spec.
(― for thick film only)
Packing style (code 8 )
R = Paper tape reel
Note: 1. All of our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. Letter L is system default code for ordering only
Phycomp worldwide - Traditional type
Size: inch (mm)
Power
Tolerance
Resistance
Packing
Quantity 5 000 0/-20%
5 000 0/-30%
Europe
5 000
0402 (1005)
1/16 W
E24
paper tape
Trimmable chip resistors
0603 (1608)
1/10 W
E24
paper tape
1206 (3216)
1/4 W
E24
paper tape
2350 500 11…L
2350 503 21…L
2350 502 11…L
2350 501 11…L
2350 503 20…L
2350 502 10…L
2350 511 10…L
2350 500 10…L
on request
on request
on request
2322 724 94…L
2322 792 61...L
2322 793 6....L
2322 791 6....L
---
For ordering rules: See page 14 for E24 / E96 values and the last 4 or 3 digits of the 12NC catalogue number
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
68
0805 (2012)
1/8 W
E24
paper tape
Chip Resistors Selection Charts
AF - Sulfur resistant chip resistors, 0201 to 2512
Features
• Superior resistance against sulfur containing atmosphere
• Hightly reliable multilayer electrode construction
• Compatible with all soldering processes
• Highly stable in auto-placement surface mounting applications
• Barrier layer end termination
• Halogen free product and production
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
marking layer
overcoat
protective glass
70
Rated Power (%)
100
resistive layer
80
60
inner electrode
40
termination (Ni / matte tin)
20
155
-55
-40
-20
0
20
40
60
80
100
120
140
inner electrode
ceramic substrate
160
Ambient Temperature ( C)
Dimensions
I1
I1
H
I2
I2
L
W
unit: mm
Type
AF0201
AF0402
AF0603
AF0805
AF1206
AF1210
AF1218
AF2010
AF2512
L
0.60±0.03
1.00 ±0.05
1.60 ±0.10
2.00 ±0.10
3.10 ±0.10
3.10±0.10
3.10±0.10
5.00±0.10
6.35±0.10
W
0.30±0.03
0.50 ±0.05
0.80 ±0.10
1.25 ±0.10
1.60 ±0.10
2.60±0.15
4.60±0.10
2.50±0.15
3.10±0.15
H
0.23 ±0.03
0.32 ±0.05
0.45 ±0.10
0.50 ±0.10
0.55 ±0.10
0.50 ±0.10
0.55 ±0.10
0.55±0.10
0.55±0.10
l1
0.10±0.05
0.20 ±0.10
0.25 ±0.15
0.35 ±0.20
0.45 ±0.20
0.45±0.15
0.45±0.20
0.55±0.15
0.60±0.20
l2
0.15±0.05
0.25 ±0.10
0.25 ±0.15
0.35 ±0.20
0.40 ±0.20
0.50±0.20
0.40±0.20
0.50±0.20
0.50±0.20
69
Chip Resistors Selection Charts
AF - Sulfur resistant chip resistors, 0201 to 2512
Electrical characteristics
Type
Power Operating Temp.
MWV RCOV DWV
range
P70
E24 ±5% 1Ω ≤ R ≤ 10MΩ
E24/E96 ±1% 1Ω ≤ R ≤ 10MΩ
Jumper < 50mΩ
Jumper criteria
(unit: A)
T. C. R.
( ppm/°C)
Resistance range & tolerance
1Ω ≤ R ≤ 10Ω -100/+350 Rated current 0.5
10Ω < R ≤ 10MΩ ±200
Max. current 1.0
AF0201 1/20W -55°C to +125°C 25V
50V
AF0402 1/16W -55°C to +155°C 50V
100V 100V
Rated current 1.0
Max. current 2.0
AF0603 1/10W -55°C to +155°C 50V
100V 100V
Rated current 1.0
Max. current 2.0
50V
E24 ±5% 1Ω ≤ R ≤ 22MΩ
1Ω ≤ R ≤ 10Ω ±200
E24/E96 ±1% 1Ω ≤ R ≤ 10MΩ
10Ω < R ≤ 10MΩ ±100
Jumper < 50mΩ
10MΩ < R ≤ 22MΩ ±200
AF0805 1/8W -55°C to +155°C 150V 300V 300V
Rated current 2.0
Max. current 5.0
AF1206 1/4W -55°C to +155°C 200V 400V 500V
Rated current 2.0
Max. current 10.0
AF1210 1/2W -55°C to +155°C 200V 500V 500V
Rated current 2.0
Max. current 10.0
AF1218
-55°C to +155°C 200V 500V 500V
1W
E24 ±5% 1Ω ≤ R ≤ 10MΩ
E24/E96 ±1% 1Ω ≤ R ≤ 10MΩ
Jumper < 50mΩ
AF2010 3/4W -55°C to +155°C 200V 500V 500V
AF2512
1Ω ≤ R ≤ 10Ω ±200
10Ω < R ≤ 10MΩ ±100
Rated current 2.0
Max. current 10.0
Rated current 2.0
Max. current 10.0
-55°C to +155°C 200V 500V 500V
1W
Rated current 2.0
Max. current 10.0
Environmental characteristics
Performance test
Test method
Procedure
Requirements
Life
MIL-STD-202Gmethod 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
±(1% +0.05Ω)
< 100mΩ for jumper
High temperature exposure
MIL-STD-202Gmethod 108A
1 000 hours at maximum operating temperature
depending on specification, unpowered
±(1% +0.05Ω)
< 100mΩ for jumper
Moisture resistance
MIL-STD-202Gmethod 106F
Each temperature / humidity cycle is defined as
8 hours (method 106F), 3 cycles / 24 hours
for 10d with 25°C / 65°C 95% R.H
±(0.5% +0.05Ω) for 1% tol.
±(1% +0.05Ω) for 5% tol.
< 100mΩ for jumper
Thermal shock
MIL-STD-202Gmethod 107G
LCT / UCT, number of cycles required is 300
Maximum transfer time is 20 seconds
±(0.5% +0.05Ω) for 1% tol.
±(1% +0.05Ω) for 5% tol.
< 100mΩ for jumper
Wetting
J-STD-002B testB
Electrical test not required. Magnification 50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned
(≥95% covered)
No visible damage
Resistance to
soldering heat
MIL-STD-202Gmethod 210F
Lead-free solder, 260°C, 10 seconds immersion time
±(1% +0.05Ω)
No visible damage
Short time overload
MIL-R-55342Dpara 4.7.5
2.5 times RCWV or maximum overload voltage whichever is less for 5 seconds at room temperature
±(1% +0.05Ω)
No visible damage
Anti-FOS
ASTM-B-809-95
Sulfur (saturated vapor) 1000 hours, 60±2°C, 91~93
%RH, Rating with no power
±(1% +0.05Ω)
Solderability
70
Chip Resistors Selection Charts
AF - Sulfur resistant chip resistors, 0201 to 2512
Global part number - Preferred type
Ordering example: AF0603JR-07100KL
AF
060 3
J R ―
07
100K
Series name (code 1-2)
AF = Anti-sulfurated
Size code (code 3-6)
(inch / metric)
0201 = 0.6 x 0.3
0402 = 1.0 x 0.5
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6
1210 = 3.2 x 1.6
1218 = 3.2 x 2.6
2010 = 5.0 x 2.5
2512 = 6.35 x 3.2
Tolerance (code 7)
F = ±1%
J = ±5% (for Jumper ordering)
L
Default code(1/2) (code 17)
Resistance (code 12-16)
0R = Jumper
10R = 10Ω
100R = 100Ω
100K = 100KΩ
Taping reel (code 10-11)
07 = 7 inch Dia. reel
10 = 10 inch Dia. reel
13 = 13 inch Dia. reel
T. C. R. (code 9)
“―” = Based on spec.
(― for thick film only)
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Note: 1. All our RSMD products meet RoHS Compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. Letter L is system default code for order only
3. AF series products are available by "Global part number" only
71
Chip Resistors Selection Charts
AF - Sulfur resistant chip resistors, Arrays
Features
• Superior resistance against sulfur containing atmosphere
• Highly reliable multilayer electrode construction
• Compatible with all soldering processes
• Highly stable in auto-placement surface mounting applications
• Barrier layer end termination
• Halogen free product and production
Schematics
Dimensions
AF122
AF124
H
T
H
P
a
B
B
W1
W2
Side view for all types
P
72
a
H1
L
L
Type
H / H1
B
P
L
T
W1
W2
AF122
0.30 +0.10/-0.05
0.24 ± 0.10
0.67 ± 0.05
1.00 ± 0.10
0.30 ±0.10
0.25 ± 0.10
1.00 ± 0.10
AF124
H : 0.45 ± 0.05
H1 : 0.30 ± 0.05
0.20 ± 0.15
0.50 ± 0.05
2.00 ± 0.10
0.45 ± 0.10
0.30 ± 0.15
1.00 ± 0.10
Chip Resistors Selection Charts
AF - Sulfur resistant chip resistors, Arrays
Electrical characteristics
Type
Power Operating Temp.
MWV RCOV DWV Resistance range & tolerance
rating
range
T. C. R.
Jumper criteria
(unit: A)
AF122
1/16W -55°C to +125°C
50V
100V 100V
Rated current
E24 ±5% 1Ω ≤ R ≤ 1MΩ
1Ω ≤ R < 10Ω ±250ppm/°C Max. current
E24/E96 ±1% 1Ω ≤ R ≤ 1MΩ
10Ω < R < 1MΩ ±200ppm/°C Rated current
Jumper < 50mΩ
100V
Max. current
0.5A
1.0A
AF124
1/16W -55°C to +155°C
25V
50V
1.0A
2.0A
Environmental characteristics
Performance test
Test method
Procedure
Requirements
Life
MIL-STD-202Gmethod 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
±(2% +0.05Ω)
< 100mΩ for jumper
High temperature exposure
MIL-STD-202Gmethod 108A
1 000 hours at maximum operating temperature
depending on specification, unpowered
±(1% +0.05Ω)
< 50mΩ for jumper
Moisture resistance
MIL-STD-202Gmethod 106F
Each temperature / humidity cycle is defined as
8 hours (method 106F), 3 cycles / 24 hours
for 10d with 25°C / 65°C 95% R.H
±(2% +0.05Ω)
< 50mΩ for jumper
Thermal shock
MIL-STD-202Gmethod 107G
LCT / UCT, number of cycles required is 300
Maximum transfer time is 20 seconds
±(0.5% +0.05Ω) for 10K to 10M
±(1% +0.05Ω) for others
< 50mΩ for jumper
Wetting
J-STD-002B testB
Electrical test not required. Magnification 50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned (≥95% covered)
Resistance to
soldering heat
MIL-STD-202Gmethod 210F
Lead-free solder, 260°C, 10 seconds immersion time
±(1% +0.05Ω)
< 50mΩ for jumper
No visible damage
Short time overload
MIL-R-55342Dpara 4.7.5
2.5 times RCWV or maximum overload voltage whichever is less for 5 seconds at room temperature
±(2% +0.05Ω)
< 50mΩ for jumper
No visible damage
Anti-FOS
ASTM-B-809-95
Sulfur (saturated vapor) 1000 hours, 60±2°C, 91~93
%RH, Rating with no power
±(1% +0.05Ω)
Solderability
73
Chip Resistors Selection Charts
AF - Sulfur resistant chip resistors, Arrays
Global part number - Array
Ordering example: AF122-JR-07100KL
AF
12
2
― J R ―
07
100K
Series name (code 1-2)
AF = Array (convex) thick film
Size code (inch) (code 3-4)
12 = 0402 x 2 (0404)
0402 x 4 (0408)
Number of resistor (code 5)
2 = 2 resistors
4 = 4 resistors
Schematic (code 6)
"─" = Based on spec.
L
Default code (code 17)
Resistance (code 12-16)
0R = Jumper
10R = 10Ω
100R = 100Ω
100K = 100KΩ
Taping reel (code 10-11)
07 = 7 inch Dia. reel
10 = 10 inch Dia. reel
13 = 13 inch Dia. reel
T. C. R. (code 9)
“―” = Based on spec.
Packing style (code 8)
R = Paper tape reel
Tolerance (code 7)
F = ± 1%
J = ± 5% (for jumper ordering)
Note: 1. All our RSMD products meet RoHS Compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. Letter L is system default code for order only
74
Chip Resistors Selection Charts
AC - Automotive grade chip resistors, 0402 to 2512
Features
• AEC-Q200 qualified
• Production part approval process (PPAP) support
• High reliability
• High quality level
Derating curve
Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
marking layer
overcoat
protective glass
70
Rated Power (%)
100
resistive layer
80
60
inner electrode
40
termination (Ni / matte tin)
20
inner electrode
ceramic substrate
155
-55
-40
-20
0
20
40
60
80
100
120
140
160
Ambient Temperature ( C)
Dimensions
I1
I1
H
I2
I2
L
W
unit: mm
Type
AC0402
AC0603
AC0805
AC1206
AC1210
AC1218
AC2010
AC2512
L
1.00 ±0.05
1.60 ±0.10
2.00 ±0.10
3.10 ±0.10
3.10 ±0.10
3.10 ±0.10
5.00 ±0.10
6.35 ±0.10
W
0.50 ±0.05
0.80 ±0.10
1.25 ±0.10
1.60 ±0.10
2.60 ±0.15
4.60 ±0.10
2.50 ±0.15
3.10 ±0.15
H
0.32 ±0.05
0.45 ±0.10
0.50 ±0.10
0.55 ±0.10
0.50 ±0.10
0.55 ±0.10
0.55 ±0.10
0.55 ±0.10
l1
0.20 ±0.10
0.25 ±0.15
0.35 ±0.20
0.45 ±0.20
0.45 ±0.15
0.45 ±0.20
0.55 ±0.15
0.60 ±0.20
l2
0.25 ±0.10
0.25 ±0.15
0.35 ±0.20
0.40 ±0.20
0.50 ±0.20
0.40 ±0.20
0.50 ±0.20
0.50 ±0.20
75
Chip Resistors Selection Charts
AC - Automotive grade chip resistors, 0402 to 2512
Electrical characteristics
Type
Operating
Temp.
range
Power
P70
MWV RCOV DWV
Resistance range & tolerance
Jumper criteria
(unit: A)
T. C. R.
( ppm/°C)
AC0402 1/16W -55°C to +155°C 50V
100V 100V
Rated current 1.0
Max. current 2.0
AC0603 1/10W -55°C to +155°C 50V
100V 100V
Rated current 1.0
Max. current 2.0
AC0805 1/8W -55°C to +155°C 150V 300V 300V
Rated current 2.0
Max. current 5.0
AC1206 1/4W -55°C to +155°C 200V 400V 500V
Rated current 2.0
Max. current 10.0
E24 ±5% 1Ω ≤ R ≤ 10MΩ
1Ω ≤ R ≤ 10Ω ±200
E24/E96 ±0.5%, ±1% 1Ω ≤ R ≤ 10MΩ
10Ω < R ≤ 10 MΩ ±100
Jumper < 0.05Ω
AC1210 1/2W -55°C to +155°C 200V 500V 500V
Rated current 2.0
Max. current 10.0
-55°C to +155°C 200V 500V 500V
Rated current 6.0
Max. current 10.0
AC2010 3/4W -55°C to +155°C 200V 500V 500V
Rated current 2.0
Max. current 10.0
-55°C to +155°C 200V 500V 500V
Rated current 2.0
Max. current 10.0
AC1218
AC2512
1W
1W
Environmental characteristics
Performance test
Test method
Procedure
Requirements
Life
AEC-Q200-REV C-Test 8
MIL-STD-202 Method 108
1 000 hours at 125°C applied RCWV
1.5 hours on, 0.5 hours off
±(1% +0.05Ω)
< 100mΩ for jumper
High temperature exposure
AEC-Q200-REV C-Test 3
MIL-STD-202 Method 108
1 000 hours at maximum operating temperature
depending on specification
±(1% +0.05Ω)
< 50mΩ for jumper
Moisture resistance
AEC-Q200-REV C-Test 6
MIL-STD-202 Method 106
Each temperature / humidity cycle is defined as
8 hours (method 106F), 3 cycles / 24 hours
for 10d with 25°C / 65°C 95% R.H.
±(0.5% +0.05Ω) for 1% tol.
±(2% +0.05Ω) for 5% tol.
< 100mΩ for jumper
Biased humidity
AEC-Q200-REV C-Test 7
MIL-STD-202 Method 103
1 000 hours; + 85°C 85% R.H.; 10% of operating
power
Measured at 24 ±2 hours after test
±(1% +0.05Ω)
< 100mΩ for jumper
Thermal shock
AEC-Q200-REV C-Test 16
MIL-STD-202 Method 107
LCT / UCT, number of cycles required is 300
Maximum transfer time is 20 seconds
±(1% +0.05Ω)
< 50mΩ for jumper
Wetting
AEC-Q200-REV C-Test 18
J-STD-002B testB
Electrical test not required. Magnification 50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned
(≥95% covered)
No visible damage
Resistance to
soldering heat
AEC-Q200-REV C-Test 15
MIL-STD-202 Method 215
Lead-free solder, 260°C, 10 seconds immersion time
±(1% +0.05Ω)
< 50mΩ for jumper
No visible damage
MIL-R-55342Dpara 4.7.5
2.5 times RCWV or maximum overload voltage
whichever is less for 5 seconds at room temperature
±(1% +0.05Ω)
< 100mΩ for jumper
No visible damage
Solderability
Short time overload
76
Chip Resistors Selection Charts
AC - Automotive grade chip resistors, 0402 to 2512
Global part number - Preferred type
Ordering example: AC0603JR-07100KL
AC
060 3
J R ―
07
100K
Series name (code 1-2)
AC = Automotive grade
Size code (code 3-6)
(inch / metric)
0402 = 1.0 x 0.5
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6
1210 = 3.2 x 2.6
1218 = 3.2 x 4.5
2010 = 5.0 x 2.5
2512 = 6.35 x 3.2
Tolerance (code 7)
F = ±1%
J = ±5% (for jumper ordering)
L
Default code(1/2) (code 17)
Resistance (code 12-16)
0R = Jumper
10R = 10Ω
100R = 100Ω
100K = 100KΩ
Taping reel (code 10-11)
07 = 7 inch Dia. reel
10 = 10 inch Dia. reel
13 = 13 inch Dia. reel
T. C. R. (code 9)
“―” = Based on spec.
(― for thick film only)
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Note: 1. All of our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. Letter L is system default code for ordering only
3. AC series products are available by "Global part number" only
77
Chip Resistors Selection Charts
AT - RF attenuator chip resistors, 0404
Features
• Reduce system size
• Low assembly cost
• Higher component and system reliability
• Suitable for applications of mobile phones, receivers,
battery chargers, palmtop computers and tablets
Derating curve
Construction
Maximum dissipation (P) in percentage of rated power as a function of the
operating ambient temperature (Tamb).
ATV 321
The rectangular marker designates input pin 1
1
3
1
3
70
100
Rated Power (%)
Schematics
80
R1
attenuated
output signal
input signal
R2
R2
60
40
20
2
125
-55
-40
-20
0
20
40
60
80
100
120
140
2
160
4
4
Ambient Temperature ( C)
Dimensions
L
P
T
A
B
D
W
unit: mm
78
Type
L
W
T
A
B
P
D
ATV321
1.00 ±0.10
1.00 ±0.10
0.35 ±0.05
0.33 ±0.10
0.15 ±0.10
0.65 ±0.10
0.25 ±0.10
Chip Resistors Selection Charts
AT - RF attenuator chip resistors, 0404
Electrical characteristics
Type
Power
P70
Operating Temp.
range
MPV
VSWR
(Max.)
Impedance
Attenuation range & tolerance
-1dB to -5dB ±0.3 dB
ATV321
40mW
-55°C to +125°C
50V
1.3
50Ω
-6dB to -10dB ±0.5 dB
-15dB ±1.0 dB
-20dB ±2.0 dB
Frequency range
-1dB to -10dB DC to 2.5 GHz
-15dB to -20dB DC to 2.0 GHz
Environmental characteristics
Performance test
Test method
Procedure
Requirements
Life
MIL-STD-202Gmethod 108A
1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
Max.: ±0.3 dB
Humidity
(steady state)
JIS C 5202 7.5
1 000 hours, 40 ±2°C, 93(+2/-3)% RH
RCWV applied for 1.5 hours on and 0.5 hour off
Max.: ±0.3 dB
Moisture resistance
MIL-STD-202Gmethod 106F
Each temperature / humidity cycle is defined as 8 hours (method
106F), 3 cycles / 24 hours for 10d with 25°C / 65°C 95% R.H
Max.: ±0.3 dB
Thermal shock
MIL-STD-202Gmethod 107G
LCT / UCT, number of cycles required is 300
Maximum transfer time is 20 seconds
Max.: ±0.3 dB
Wetting
J-STD-002B
testB
Electrical test not required. Magnification 50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned
(≥95% covered)
Resistance to
soldering heat
MIL-STD-202Gmethod 210F
Lead-free solder, 260°C, 10 seconds immersion time
Max.: ±0.1 dB
MIL-R-55342Dpara 4.7.5
2.5 times RCWV or maximum overload voltage whichever is
less for 5 seconds at room temperature
Max.: ±0.3 dB
Solderability
Short time overload
79
Chip Resistors Selection Charts
AT - RF attenuator chip resistors, 0404
Global part number - Preferred type for ordering Yageo / Phycomp branded products
Ordering example: ATV321CR-071DBL
AT
V321
C R ―
07
1DB
L
Default code(1/2) (code 16)
Series name (code 1-2)
AT= RF attenuator thick film
Attenuation (code 12-15)
0dB
-1dB
-2dB
-10dB
-15dB
-20dB
Size code (code 3-6)
(inch / metric)
V321 = 0404 = 1.0 x 1.0
Tolerance (code 7)
C = ±0.3dB
D = ±0.5dB
F = ±1dB
G = ± 2dB
Taping reel (code 10-11)
07 = 7 inch Dia. reel
Packing style (code 8 )
R = Paper/PE tape reel
T. C. R. (code 9)
“―” = Based on spec.
(― for thick film only)
Note: 1. All of our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. Letter L is system default code for ordering only
Phycomp worldwide - Traditional type
Packing
Quantity
Remark
paper tape
2350 703 11…L
For last three digits, see following table "Attenuation codes"
10 000
Note: L = Default code
Phycomp CTC ordering code - Traditional type - North America
Packing
Quantity
Remark
paper tape
9CV3218AXXXXX-PF3
For last 9th to 13th digits, see following table "Attenuation codes"
10 000
Attenuation codes
Standard
80
Value
(dB)
Tolerance
(dB)
Phycomp worldwide code
(12NC)
Phycomp North America code
(NA code)
1
2
3
4
5
6
7
8
9
10
15
20
±0.3
±0.3
±0.3
±0.3
±0.3
±0.5
±0.5
±0.5
±0.5
±0.5
±1.0
±2.0
012
022
032
042
052
063
073
083
093
103
154
205
01DBC
02DBC
03DBC
04DBC
05DBC
06DBD
07DBD
08DBD
09DBD
10DBD
15DBF
20DBG
Chip Resistors Engineering Design Kits
Engineering design kits/ Engineering design books
Thick film chip resistors
Global CTC
(Preferred)
Description
Max.
power
Resistance
range
Resistor Min.
pieces items
Size
Tolerance
RC0100-R-SKE24L RC0100, ±1% & ±5% , RoHS compliant, + Jumper
01005
F/J
1/32W
10 - 1M
100
100
RC0201-R-SKE24L RC0201, ±1% & ±5% , RoHS compliant, + Jumper
0201
F/J
1/20 W
10 - 1M
100
120
RC0402JR-SKE24L RC0402, ±5%, RoHS compliant, + Jumper
0402
J
1/16 W
10 - 1M
100
110
RC0402FR-SKE96L RC0402, ±1%, RoHS compliant, + Jumper
0402
F
1/16 W
10 - 1M
100
450
RC0603JR-SKE24L RC0603, ±5%, RoHS compliant, + Jumper
0603
J
1/10 W
10 - 1M
50
110
RC0603FR-SKE96L RC0603, ±1%, RoHS compliant, + Jumper
0603
F
1/10 W
10 - 1M
50
450
RC0805JR-SKE24L RC0805, ±5%, RoHS compliant, + Jumper
0805
J
1/8 W
10 - 1M
50
110
RC0805FR-SKE96L RC0805, ±1%, RoHS compliant, + Jumper
0805
F
1/8 W
10 - 1M
50
280
RC1206JR-SKE24L RC1206, ±5%, RoHS compliant, + Jumper
1206
J
1/4 W
10 - 1M
50
110
RC1206FR-SKE96L RC1206, ±1%, RoHS compliant, + Jumper
1206
F
1/4 W
10 - 1M
50
350
Size
Tolerance
Max.
power
Resistance
range
0402 X 2
0402 X 4
J
1/16 W
10 - 1M
Size
Tolerance
Max.
power
Resistance
range
0402 - 2512
F/J
---
100m - 910m
Size
Tolerance
Max.
power
Resistance
range
---
---
---
---
Size
Tolerance
Max.
power
Resistance
range
F/J
---
1 - 10M
Size
Tolerance
Max.
power
Resistance
range
0402 - 1206
---
---
---
Size
Tolerance
Max.
power
Resistance
range
0402 - 1206
B
---
10 ~ 1M
Size
Tolerance
Max.
power
Resistance
range
0402 - 1206
F
---
10 ~ 1M
Size
Tolerance
Max.
power
Resistance
range
0603 - 2512
F
---
0.5m ~ 50m
Thick film array chip resistors (convex)
Global CTC
(Preferred)
YC12X-JR-SK001L
Description
YC124 / YC122, ±5%, +Jumper, RoHS compliant,
Resistor Min.
pieces items
100
75
Engineering design kit for current sensing application
Global CTC
(Preferred)
CS0402-R-SK001L
Description
RL0402 - RL2512, ±1% & ±5%, RoHS compliant
Resistor Min.
pieces items
30
160
Engineering design kit for mobile application
Global CTC
(Preferred)
Description
MD0402-R-SK001L Chip resistors / MLCC / Attenuators
Resistor Min.
pieces items
50 - 100
44
Note: Before ordering, please contact our sales force for detail of resistance
Engineering design kit for automotive application
Global CTC
(Preferred)
AC0402-R-SK001L
Description
AC0402 - AC1206, ±1% & ±5%, RoHS compliant, + Jumper 0402 - 1206
Resistor Min.
pieces items
50-100
200
Engineering design kit for general purpose
Global CTC
RC0402-R-SK001L
Description
Chip resistors / MLCC
Resistor
Items
pieces
50-100
472
Engineering design book for thin film chip resistor
Global CTC
RT0402-R-SB001L
Description
RT0402 - RT1206, E96 series, ±0.1%, RoHS compliant
Resistor
Items
pieces
10
60
Engineering design book for automotive application
Global CTC
AC0402-R-SB001L
Description
AC0402 - AC1206, E96 series, ±1%, RoHS compliant
Resistor
Items
pieces
10
60
Engineering design book for current sensing application
Global CTC
PE0603-R-SB001L
Description
PA/PE/PR, ±1%, RoHS compliant, low T.C.R.
Resistor
Items
pieces
10
60
81
SMD CERAMIC MULTILAYER CAPACITORS
MLCC General Information
Specification overview
Specification overview
Description
TC
code
NPO
Series
Capacitance range
Voltage range
General purpose
0.47 pF to 22 nF
10V to 50 V
01005, 0201, 0402, 0603,
0805, 1206, 1210,1812
Medium and High voltage
10 pF to 22 nF
100 V to 3000 V
0402, 0603, 0805, 1206,
1210, 1808, 1812
High frequency
0.2 pF to 100 pF
16V to 250 V
01005, 0201, 0402, 0603, 0805
General purpose & High capacitance
100 pF to 47 µF
6.3 V to 50 V
01005, 0201, 0402, 0603, 0805,
1206, 1210,1812, 2220
100 pF to 2.2 µF
100 V to 3000 V 0603, 0805, 1206, 1210, 1812
Discrete
X7R Medium and High voltage
Low inductance
10 nF to 220 nF
10 V to 50 V
0306, 0508, 0612
Soft termination
100 pF to 1 μF
16 V to 630 V
0603, 0805,1206, 1210, 1808, 1812
X5R General purpose & High capacitance
100 pF to 100 µF
6.3 V to 50 V
01005, 0201, 0402, 0603,
0805, 1206, 1210,1812
Y5V General purpose & High capacitance
10 nF to 47 µF
6.3 V to 50 V
0201, 0402, 0603, 0805, 1206, 1210
Automotive grade
products
NP0 Automotive grade
10 pF to 10 nF
50 V to 630 V
0402, 0603, 0805,1206, 1210
X7R Automotive grade
100 pF to 2.2 μF
16 V to 630 V
0402, 0603, 0805,1206, 1210
Safety certification
products
NP0 High voltage SC type
2.0 pF to 470 pF
X1/Y2, X2/Y3
1808, 1812
X7R High voltage SC type
150 pF to 1.5 nF
X1/Y2, X2/Y3
1808, 1812
NP0 4C arrays
10 pF to 470 pF
50 V
0508, 0612
X7R 4C arrays
180 pF to 100 nF
16 V to 50 V
0508, 0612
Y5V 4C arrays
10 nF to 100 nF
25 V
0612
C-Arrays
84
Size
MLCC General Information
Ordering information - Global part number
Global part number
Ordering example: CC0201KRX7R8BB102
CC
0201
Series name (code 1-2)
CA=4 x Capacitors array
CC=Multilayer chip capacitors
CL=Low inductance capacitors
CQ=High frequency capacitors
SC=Safety certification capacitors
AC = Automotive grade capacitors
CS = Soft termination capacitors
Size code (code 3-6)
0100
0201
0402
0603
0805
1206
1210
1808
1812
2220
0306
0508
0612
Capacitance tolerance (code 7)
A = ±0.05 pF (CQ series only)
B = ±0.1 pF
C = ±0.25 pF
D = ±0.5 pF
F = ±1%
G = ±2%
J=±5%
K = ±10%
M = ±20%
Z=-20% to +80%
Packing style (code 8)
R = Paper / PE tape reel Ø7 inch
P = Paper / PE tape reel Ø13 inch
K = Embossed plastic tape reel Ø7 inch
F = Embossed plastic tape reel Ø13 inch
C = Bulk case
TC material (code 9-11)
NPO
X5R
X7R
Y5V
K R X7R 8 B B
102
Capacitance value (code 15-17)
102 = 1 000 pF
(2 significant digits+number of zeros;
the 3rd digit signifies the multiplying
factor, and letter R is decimal point)
0=x1
1 = x 10 1
2 = x 10 2
3 = x 10 3
4 = x 10 4
5 = x 10 5
6 = x 10 6
7 = x 10 7
X X R = Special capacitance
(X X: capacitance before decimal point)
Process code (code 14)
N = NP0
B = Class 2 product
Termination (code 13)
B = Ni-Barrier
Rated voltage (code 12)
5 =6.3 V
6 =10 V
7 =16 V
8 =25 V
G = 35 V
9 = 50 V
0 = 100 V
A = 200 V
Y = 250 V
B = 500 V
Z = 630 V
C = 1 kV
D = 2 kV
E = 3 kV
T = X2 / Y3 for TUV / UL
W = X1 / Y2 for TUV / UL
U = X1 for UL (X7R, 1812)
85
MLCC Selection Charts
Ordering information - Global part number
Global part number
Ordering example: CCxxxxKRX5RxBBxxx (for Low profile)
CC 1
05
Series name (code 1-2)
CC = Multilayer chip capacitors
Number of cap (code 3)
4 = 4 cap
2 = 2 cap
1 = Single
Size code (code 4-5)
01 = 0201
02 = 0402
03 = 0603
05 = 0805
06 = 1206, 0306
08 = 1808, 0508
10 = 1210
12 = 1812, 0612
Thickness (code 6)
3 =0.3 mm
4 =0.45 mm
5 =0.5 mm
6 =0.6 mm
8 =0.8 mm
9 =0.85 mm
A =1.0 mm
B =1.25 mm
C =1.6 mm
D =2.0 mm
E =2.5 mm
F =1.7 mm
M=1.15 mm
N =1.35 mm
Q =1.5 mm
R =1.8 mm
Capacitance tolerance (code 7)
B = ±0.1 pF
C = ±0.25 pF
D = ±0.5 pF
F = ±1%
G = ±2%
J=±5%
K = ±10%
M = ±20%
Z=-20% to +80%
Packing style (code 8)
R = Paper / PE tape reel Ø7 inch
P = Paper / PE tape reel Ø13 inch
K = Embossed plastic tape reel Ø7 inch
F = Embossed plastic tape reel Ø13 inch
C = Bulk case
86
9 K R X7R 8 B B
102
Capacitance value (code 15-17)
102 = 1 000 pF
(2 significant digits+number of zeros;
the 3rd digit signifies the multiplying
factor, and letter R is decimal point)
0=x1
1 = x 10 1
2 = x 10 2
3 = x 10 3
4 = x 10 4
5 = x 10 5
6 = x 10 6
7 = x 10 7
X X R = Special capacitance
(X X: capacitance before decimal point)
Process code (code 14)
N = NP0
B = Class 2 product
Termination (code 13)
B = Ni-Barrier
Rated voltage (code 12)
5=6.3 V
6=10 V
7 =16 V
8 =25 V
9 =50 V
0 =100 V
A = 200 V
B = 500 V
C = 1 kV
D = 2 kV
E = 3 kV
G = 35 V
Y = 250 V
Z=630 V
TC material (code 9-11)
X5R
X7R
MLCC General Information
Thickness classes and packing quantities for all series
Thickness classes and packing quantities
Description
Thickness
classification
(mm)
Paper
Blister
Paper
Blister
01005
0.2±0.02
20 000
---
---
---
330 mm / 13”
Quantity
per
bulk case
---
0201
0.3 ±0.03 / ±0.05
15 000
---
50 000
---
---
0.5 ±0.05 / ±0.15 / ±0.20
10 000
---
50 000
---
50 000
0603
0.8 ±0.1 / ±0.2
4 000
---
15 000
---
15 000
0.6 ±0.1
4 000
---
20 000
---
10 000
0.85/1.0 ±0.1
4 000
---
15 000
---
8 000
1.25 ±0.2
---
3 000
---
10 000
5 000
1206
0.6 ±0.1
4 000
---
20 000
---
---
0.85 ±0.1
4 000
---
15 000
---
---
1.00 / 1.15 ±0.1
---
3 000
---
10 000
---
1.25 ±0.2
---
3 000
---
10 000
---
1.6 ±0.15
1210
Discrete capacitors
1808
1812
2220
8 mm
---
2 500
---
10 000
---
1.6 ±0.2 / ±0.3
---
2 000
---
10 000
---
0.6 / 0.7 ±0.1
---
4 000
---
15 000
---
0.85 ±0.1
---
4 000
---
10 000
---
1.0 ±0.15
---
3 000
---
10 000
---
1.15 ±0.1
---
3 000
---
10 000
---
1.15 ±0.15
---
3 000
---
10 000
---
1.25 ±0.2
---
3 000
---
---
---
1.5 ±0.1
---
2 000
---
---
---
1.6 / 1.9 ±0.2
---
2 000
---
---
---
2.0 ±0.2
---
2 000 / 1 000
---
---
---
2.5 ±0.2 / ±0.3
---
1 000 / 500
---
---
---
1.15 ±0.15
---
3 000
---
---
---
1.25 ±0.2
---
3 000
---
---
---
1.35 ±0.15
---
2 000
---
---
-----
1.5 ±0.1
---
2 000
---
---
1.6 ±0.2
---
2 000
---
8 000
---
2.0 ±0.2
---
2 000
---
---
---
0.6 / 0.85 ±0.1
---
2 000
---
---
---
1.15 ±0.1
---
1 000
---
---
---
1.15 ±0.15
Arrays
Tape width
180 mm / 7”
0402
0805
Low inductance
Quantity per reel
Size
code
12 mm
1.25 ±0.2
---
1 000
---
---
---
---
1 000
---
---
---
1.35 ±0.15
---
1 000
---
---
---
1.5 ±0.1
---
1 000
---
---
---
1.6 ±0.2
---
1 000
---
---
---
2.0 ±0.2
---
1 000
---
---
---
0.85 ±0.1
---
1 500
---
---
---
1.15 ±0.1
---
1 500
---
---
---
0306
0.5 ±0.1
4 000
---
15 000
---
---
0508
0.85 ±0.1
4 000
---
15 000
---
---
0612
0.85 ±0.1
4 000
---
15 000
---
---
0508
0.6 ±0.1
4 000
---
---
---
---
0612
0.8 ±0.1
4 000
---
---
---
---
8 mm
87
MLCC Selection Charts
NPO - General purpose 16 to 50V, 01005 to 1812
Features
• Ultra-stable on capacitance
• Tight tolerance available
• High reliability
• Low ESR
• Good frequency performance
• No aging of capacitance
Temperature characteristic
Construction
40
TC
(x10- 6/K)
20
0
-20
-40
-40
0
40
80
120
T ( „ C)
Case dimensions
Discrete capacitors - General purpose
Case size designation
Inch-based
W
L2
L4
L1
L2 / L3
W
L1
min
L2 / L3
max
L4
min
01005
0402M
0.4±0.02
0.2±0.02
0.07
0.14
0.14
0201
0603M
0.6 ±0.03
0.3 ±0.03
0.10
0.20
0.20
0402
1005M
1.0 ±0.05
0.5 ±0.05
0.15
0.30
0.40
0603
1608M
1.6 ±0.10
0.8 ±0.10
0.20
0.60
0.40
0.25
0.75
0.55
0.25
0.75
0.55
0805
2012M
L3
1206
1210
1812
Note: 1. Dimension for size 0805 to 1812, C ≤ 1 nF
2. Dimension for size 0805 to 1812, C > 1 nF
88
Metric
Dimensions in mm
3216M
3225M
4532M
2.0 ±0.10
(1)
1.25 ±0.10
(1)
2.0 ±0.20
(2)
1.25 ±0.20
(2)
3.2 ±0.15
(1)
1.6 ±0.15
(1)
0.25
0.75
1.40
3.2 ±0.30
(2)
1.6 ±0.20
(2)
0.25
0.75
1.40
3.2 ±0.20
(1)
2.5 ±0.20
(1)
0.25
0.75
1.40
3.2 ±0.40
(2)
2.5 ±0.30
(2)
0.25
0.75
1.40
4.5 ±0.20
(1)
3.2 ±0.20
(1)
0.25
0.75
2.20
4.5 ±0.40
(2)
3.2 ±0.40
(2)
0.25
0.75
2.20
MLCC Selection Charts
NPO - General purpose 16 to 50V, 01005 to 0603
NP0
General purpose
Capacitance
0.22 pF
0.47 pF
0.56 pF
0.68 pF
0.82 pF
1 pF
1.2 pF
1.5 pF
1.8 pF
2.2 pF
2.7 pF
3.3 pF
3.9 pF
4.7 pF
5.6 pF
6.8 pF
8.2 pF
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
39 pF
47 pF
56 pF
68 pF
82 pF
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1000 pF
Tape width
01005
16 V
0201
0402
16 V
25 V
50 V
0.3 ±0.03
0.3 ±0.03
0.3 ±0.03
0603
16 V
25 V
50 V
0.5 ±0.05
0.5 ±0.05
0.5 ±0.05
16 V
25 V
50 V
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.2 ±0.02
0.5 ±0.05
0.5 ±0.05
8 mm
0.5 ±0.05
Note: Values in shaded cells indicate thickness class (unit: mm)
89
MLCC Selection Charts
NPO - General purpose 16 to 50V, 01005 to 0603
NP0
General purpose
Capacitance
01005
16 V
0201
16 V
25 V
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
12 nF
15 nF
18 nF
22 nF
33 nF
39 nF
Tape width
Note: Values in shaded cells indicate thickness class (unit: mm)
90
0402
50 V
16 V
25 V
8 mm
0603
50 V
16 V
25 V
50 V
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
MLCC Selection Charts
NPO - General purpose 16 to 50V, 0805 to 1812
NP0
General purpose
Capacitance
0.22 pF
0.47 pF
0.56 pF
0.68 pF
0.82 pF
1 pF
1.2 pF
1.5 pF
1.8 pF
2.2 pF
2.7 pF
3.3 pF
3.9 pF
4.7 pF
5.6 pF
6.8 pF
8.2 pF
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
39 pF
47 pF
56 pF
68 pF
82 pF
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1000 pF
Tape width
0805
1206
16 V
25 V
50 V
16 V
25 V
50 V
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
1210
1210
1812
25 V
50 V
50 V
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
91
MLCC Selection Charts
NPO - Gerneral purpose 16 to 50V, 0805 to 1812
NP0
General purpose
Capacitance
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
12 nF
15 nF
18 nF
22 nF
33 nF
39 nF
47 nF
56 nF
68 nF
82 nF
100 nF
Tape width
0805
1206
16 V
25 V
50 V
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
25 V
50 V
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
1.25 ±0.2
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
1210
1812
25 V
50 V
50 V
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
Note: Values in shaded cells indicate thickness class (unit: mm)
92
16 V
1210
2.0 ±0.2
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
1.15 ±0.1
1.6 ±0.2
1.15 ±0.1
1.6 ±0.2
1.15 ±0.1
1.6 ±0.2
1.6 ±0.2
1.6 ±0.2
1.6 ±0.2
8 mm
2.0 ±0.2
MLCC Selection Charts
NPO - Medium & High voltage, 0402 to 1812
Features
• Capable of operating at high voltage levels
• For high frequency snubber
• Decoupling / smoothing function
Temperature characteristic
Construction
40
TC
(x10- 6/K)
20
0
-20
-40
0
-40
40
80
120
T ( „ C)
Dimensions
Discrete capacitors - Medium and High voltage
Case size designation
W
L2
L4
L1
L3
Dimensions in mm
L2 / L3
L2 / L3
Inch-based
Metric
L1
W
0402
1005M
1.0 ±0.05
0.5 ±0.05
0.15
0.30
0.40
0603
1608M
1.6 ±0.10
0.8 ±0.10
0.20
0.60
0.40
0805
2012M
2.0 ±0.20
1.25 ±0.20
0.25
0.75
0.55
1206
3216M
3.2 ±0.30
1.6 ±0.20
0.25
0.75
1.40
1210
3225M
3.2 ±0.40
2.5 ±0.30
0.25
0.75
1.40
1808
4520M
4.5 ±0.40
2.0 ±0.30
0.25
0.75
2.20
1812
4532M
4.5 ±0.40
3.2 ±0.30
0.25
0.75
2.20
min
max
L4
min
93
MLCC Selection Charts
NPO - Medium voltage, 0402 to 0805
NP0
Medium voltage
Capacitance
1 pF
1.2 pF
1.5 pF
1.8 pF
2.2 pF
2.7 pF
3.3 pF
3.9 pF
4.7 pF
5.6 pF
6.8 pF
8.2 pF
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
39 pF
47 pF
56 pF
68 pF
82 pF
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1000 pF
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
Tape width
0402
100 V
0603
100 V
250 V
100 V
250 V
500 V
630 V
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.85 ±0.1
0.85 ±0.1
0.5 ±0.05
0.8 ±0.1
0.8 ±0.1
Note: Values in shaded cells indicate thickness class (unit: mm)
94
0805
0.6 ±0.1
0.85 ±0.1
1.25 ±0.2
0.85 ±0.1
1.25 ±0.2
1.25 ±0.2
8 mm
1.25 ±0.2
MLCC Selection Charts
NPO - Medium voltage, 1206 / 1210
NP0
Medium voltage
Capacitance
1 pF
1.2 pF
1.5 pF
1.8 pF
2.2 pF
2.7 pF
3.3 pF
3.9 pF
4.7 pF
5.6 pF
6.8 pF
8.2 pF
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
39 pF
47 pF
56 pF
68 pF
82 pF
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1000 pF
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
Tape width
1206
100 V
250 V
1210
500 V
630 V
100 V
250 V
500 V
630 V
0.6 ±0.1
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
0.85 ±0.1
0.6 ±0.1
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
0.85 ±0.1
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
0.85 ±0.1
1.25 ±0.2
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
95
MLCC Selection Charts
NPO - High voltage, 0805 to 1210
NP0
High voltage
Capacitance
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
39 pF
47 pF
56 pF
68 pF
82 pF
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1000 pF
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
12 nF
15 nF
18 nF
22 nF
33 nF
Tape width
0805
1000 V
1210
1000 V
2000 V
1.25 ±0.2
1.25 ±0.2
1000 V
2000 V
1.25 ±0.2
1.25 ±0.2
0.85 ±0.1
Note: Values in shaded cells indicate thickness class (unit: mm)
96
1206
8 mm
MLCC Selection Charts
NPO - High voltage, 1808 / 1812
NP0
High voltage
Capacitance
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
39 pF
47 pF
56 pF
68 pF
82 pF
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1000 pF
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
12 nF
15 nF
18 nF
22 nF
33 nF
Tape width
1808
1000 V
2000 V
1812
3000 V
1000 V
2000 V
3000 V
1.25 ±0.2
1.25 ±0.2
1.6 ±0.2
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
2.0 ±0.2
1.25 ±0.2
12 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
97
MLCC Selection Charts
NP0 - High frequency, 01005 to 0805
Features
• Lowest ESR in high frequency
• Ultra small
• Noise filtering
ESR characteristic
Impendance and ESR @ 20„C
1K
Z
(Ω)
100
10
1
ESR
Impendance
100m
100K
1M
10M
100M
1G
10G
Frequency (Hz)
Construction
98
MLCC Selection Charts
NP0 - High frequency, 01005 to 0805
Case dimensions
Discrete capacitors - High Frequency
Case size designation
W
L2
L4
L1
L3
Dimensions in mm
L1
W
0402M
0.4 ±0.02
0.2 ±0.02
0.07
0.14
0.13
0201
0603M
0.6 ±0.03
0.3 ±0.03
0.10
0.20
0.20
0402
1005M
1.0 ±0.05
0.5 ±0.05
0.15
0.30
0.40
0603
1608M
1.6 ±0.10
0.8 ±0.10
0.20
0.60
0.40
0805
2012M
2.0 ±0.10
1.25 ±0.10
0.25
0.75
0.55
01005
L4
max
min
16 V
High frequency
0201
16 V
0402
25 V
16 V
25 V
50 V
Capacitance
0.2 pF
0.22 pF
0.3 pF
0.47 pF
0.4 pF
0.56 pF
0.5 pF
0.68 pF
0.6 pF
0.82 pF
0.7 pF
1 pF
0.8 pF
1.2 pF
0.9 pF
1.5 pF
1 pF
1.8 pF
1.2 pF
2.2 pF
1.5 pF 0.2 ±0.02 0.3 ±0.03 0.3 ±0.03
2.7 pF
1.8 pF
3.3 pF
2.2 pF
3.9 pF
0.5 ±0.05 0.5 ±0.05 0.5 ±0.05
4.7 pF
3.3 pF
5.6 pF
3.9 pF
6.8 pF
4.7 pF
8.2 pF
5.6 pF
10 pF
6.8 pF
12 pF
8.2 pF
15 pF
10 pF
18 pF
12 pF
22 pF
15 pF
27 pF
18 pF
33 pF
22 pF
39 pF
27 pF
47 pF
33 pF
56 pF
39 pF
68 pF
47 pF
Tape
width
min
NP0
High frequency
2.7 pF
L2 / L3
Metric
01005
NP0
Capacitance
L2 / L3
Inch-based
0603
50 V
100 V
0805
250 V
50 V
100 V
250 V
0.8 ±0.1 0.8 ±0.1 0.8 ±0.1
0.6 ±0.1 0.6 ±0.1 0.6 ±0.1
82 pF
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
100 pF
Tape
width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
99
MLCC Selection Charts
X7R - General purpose & High capacitance, 01005 to 2220
Features
• Semi-stable on capacitance and high K
• High volumetric efficiency
• Highly reliable in high temperature application
• High insulation resistance
Temperature characteristic
∆C
C
(%)
Construction
15
10
5
0
-5
-10
-15
-55
-25
5
40
65
95
125
T ( C)
Case dimensions
Discrete capacitors - General purpose & High capacitance
Case size designation
L1
W
01005
0402M
0.4±0.02
0.2±0.02
0201
0603M
0402
1005M
1608M
W
0805
L4
L1
2012M
L3
1206
3216M
1210
3225M
1808
4520M
1812
4532M
2220
5750M
0.07
min
L2 / L3
max
0.14
L4
min
0.14
0.6 ±0.03
0.3 ±0.03
0.10
0.20
0.20
0.6 ±0.05
0.3 ±0.05
0.10
0.20
0.20
1.0 ±0.05 (1)
0.5 ±0.05 (1)
0.15
0.30
0.40
1.0 ±0.20
(2)
0.5 ±0.20 (2)
0.15
0.30
0.40
1.6 ±0.10
(1)
(1)
0.20
0.60
0.40
1.6 ±0.15 (2)
0.8 ±0.15 (2)
0.20
0.60
0.40
2.0 ±0.10 (1)
1.25 ±0.10 (1)
0.25
0.75
0.55
2.0 ±0.20 (2)
1.25 ±0.20 (2)
0.25
0.75
0.55
3.2 ±0.15 (1)
1.6 ±0.15 (1)
0.25
0.75
1.40
3.2 ±0.30 (2)
1.6 ±0.20 (2)
0.25
0.75
1.40
(1)
(1)
0.25
0.75
1.40
3.2 ±0.40 (2)
2.5 ±0.30 (2)
0.25
0.75
1.40
4.5 ±0.40
2.0 ±0.30
0.25
0.75
2.20
4.5 ±0.20 (1)
3.2 ±0.20 (1)
0.25
0.75
2.20
4.5 ±0.40 (2)
3.2 ±0.40 (2)
0.25
0.75
2.20
5.7 ±0.40
5.0 ±0.30
0.25
0.75
3.40
3.2 ±0.20
Note: 1. Dimension for size 0402, C < 4.7 μF; 0603, C < 10 μF; 0805 to 1812, C ≤ 100 nF
2. Dimension for size 0402, C ≥ 4.7 μF; 0603, C ≥ 10 μF; 0805 to 1812, C > 100 nF
100
L2 / L3
Metric
0603
L2
Dimensions in mm
Inch-based
0.8 ±0.10
2.5 ±0.20
MLCC Selection Charts
X7R - General purpose & High Capacitance , 01005 to 0402
X7R
Capacitance
01005
6.3 V
10 V
6.3 V
10 V
General purpose
0201
16 V
25 V
50 V
6.3 V
10 V
0402
16 V
25 V
50 V
10 pF
15 pF
22 pF
33 pF
47 pF
68 pF
100 pF
150 pF
220 pF
0.3 ±0.03
330 pF 0.2 ±0.02 0.2 ±0.02
470 pF
680 pF
0.3 ±0.03 0.3 ±0.03 0.3 ±0.03 0.3 ±0.03
1.0 nF
1.5 nF
2.2 nF
3.3 nF
0.5 ±0.05 0.5 ±0.05 0.5 ±0.05 0.5 ±0.05 0.5 ±0.05
4.7 nF
6.8 nF
10 nF
15 nF
22 nF
33 nF
47 nF
68 nF
100 nF
150 nF
220 nF
0.5 ±0.05 0.5 ±0.05 0.5 ±0.05
330 nF
470 nF
0.5 ±0.05 0.5 ±0.05
680 nF
1000 nF
0.5 ±0.05
2.2 µF
4.7 µF
10 µF
22 µF
47 µF
100 µF
Tape width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
101
MLCC Selection Charts
X7R - General purpose & High capacitance, 0603 / 0805
X7R
General purpose
Capacitance
0603
6.3 V
10 V
16 V
0805
25 V
50 V
6.3 V
10 V
16 V
25 V
50 V
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
1.25 ±0.2
1.25 ±0.2
10 pF
15 pF
22 pF
33 pF
47 pF
68 pF
100 pF
150 pF
220 pF
330 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
0.8 ±0.1
0.8 ±0.1
6.8 nF
10 nF
15 nF
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
22 nF
33 nF
47 nF
68 nF
100 nF
0.85 ±0.1
150 nF
220 nF
330 nF
470 nF
0.8 ±0.1
1.25 ±0.2
680 nF
1000 nF
0.8 ±0.1
0.8 ±0.15
1.25 ±0.2
2.2 µF
4.7 µF
10 µF
22 µF
47 µF
100 µF
Tape width
Note: Values in shaded cells indicate thickness class (unit: mm)
102
8 mm
1.25 ±0.2
MLCC Selection Charts
X7R - General purpose & High capacitance, 1206 to 2220
X7R
General purpose
Capacitance
1206
6.3 V
10 V
1210
16 V
25 V
50 V
6.3 V
10 V
16 V
25 V
50 V
1812
2220
50 V
50 V
10 pF
15 pF
22 pF
33 pF
47 pF
68 pF
100 pF
150 pF
220 pF
330 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
0.85 ±0.1
6.8 nF
10 nF 0.85 ±0.1 0.85 ±0.1 0.85 ±0.1 0.85 ±0.1
15 nF
0.85 ±0.1
22 nF
0.85 ±0.1
0.85 ±0.1 0.85 ±0.1 0.85 ±0.1 0.85 ±0.1
33 nF
47 nF
68 nF
100 nF
150 nF
1.15 ±0.1
220 nF
330 nF
0.85 ±0.1
470 nF
1.0 ±0.1
680 nF
1000 nF 1.15 ±0.1 1.15 ±0.1 1.15 ±0.1 1.15 ±0.1
2.2 µF
0.85 ±0.1
1.15 ±0.1 1.15 ±0.1 1.15 ±0.1 1.15 ±0.1
1.6 ±0.2
1.6 ±0.2
1.6 ±0.2
1.6 ±0.2
22 µF
47 µF
1.25 ±0.2
1.25 ±0.2 1.25 ±0.2 1.25 ±0.2 1.25 ±0.2
1.6 ±0.2
4.7 µF
10 µF
1.15 ±0.1 1.15 ±0.1
1.6 ±0.2
1.15 ±0.1
1.9 ±0.2
1.9 ±0.2
1.9 ±0.2
2.5 ±0.2
2.5 ±0.2
1.9 ±0.2
1.9 ±0.2
2.5 ±0.2
2.5 ±0.2
2.5 ±0.2
100 µF
Tape width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
103
MLCC Selection Charts
X7R - Medium & High voltage, 0402 to 1812
Features
• Capable of operating at high voltage levels
• For high frequency snubber
• Decoupling / smoothing function
Temperature characteristic
∆C
C
(%)
Construction
15
10
5
0
-5
-10
-15
-55
-25
5
40
65
95
125
T ( C)
Dimensions
Discrete capacitors - Medium and High voltage
Case size designation
W
L2
104
L4
L1
L3
Dimensions in mm
L2 / L3
L2 / L3
Inch-based
Metric
L1
W
0402
1005M
1.0 ±0.05
0.5 ±0.05
0.15
0.30
0.40
0603
1608M
1.6 ±0.10
0.8 ±0.10
0.20
0.60
0.40
0805
2012M
2.0 ±0.20
1.25 ±0.20
0.25
0.75
0.55
1206
3216M
3.2 ±0.30
1.6 ±0.20
0.25
0.75
1.40
1210
3225M
3.2 ±0.40
2.5 ±0.30
0.25
0.75
1.40
1808
4520M
4.5 ±0.40
2.0 ±0.30
0.25
0.75
2.20
1812
4532M
4.5 ±0.40
3.2 ±0.30
0.25
0.75
2.20
min
max
L4
min
MLCC Selection Charts
X7R - Medium and High voltage, 0402 to 0805
X7R
Medium voltage & High voltage
Capacitance
0402
100 V
0603
100 V
0805
250 V
100 V
250 V
500 V
630 V
1000 V
100 pF
150 pF
220 pF
330 pF
0.85 ±0.1
470 pF
680 pF
1.0 nF
0.8 ±0.1
0.5 ±0.05
0.85 ±0.1
0.6 ±0.1
1.5 nF
0.85 ±0.1
0.85 ±0.1
2.2 nF
3.3 nF
0.8 ±0.1
4.7 nF
6.8 nF
10 nF
15 nF
22 nF
1.25 ±0.2
0.85 ±0.1
1.25 ±0.2
1.25 ±0.2
33 nF
47 nF
68 nF
1.25 ±0.2
100 nF
150 nF
220 nF
330 nF
470 nF
680 nF
1000 nF
2.2 µF
4.7 µF
10 µF
22 µF
47 µF
100 µF
Tape width
12 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
105
MLCC Selection Charts
X7R - Medium and High voltage, 1206 / 1210
X7R
Medium voltage & High voltage
Capacitance
1206
100 V
250 V
500 V
630 V
1210
1000 V
2000 V
100 V
250 V
500 V
630 V
1000 V
2000 V
100 pF
150 pF
220 pF
330 pF
470 pF
1.25 ±0.2
680 pF
1.0 nF
1.5 nF
0.85 ±0.1
2.2 nF
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
3.3 nF 0.85 ±0.1
1.25 ±0.2 1.25 ±0.2
4.7 nF
0.85 ±0.1
6.8 nF
10 nF
1.25 ±0.2
15 nF
0.85 ±0.1
22 nF
33 nF
1.25 ±0.2
47 nF
1.6 ±0.2
1.6 ±0.2
1.6 ±0.2
1.25 ±0.2
68 nF
100 nF
150 nF
1.25 ±0.2
1.6 ±0.2
1.25 ±0.2
220 nF
330 nF
470 nF
1.6 ±0.2
1.6 ±0.2
1.25 ±0.2
680 nF
1000 nF
1.6 ±0.2
2.2 µF
2.0 ±0.2
4.7 µF
10 µF
22 µF
47 µF
100 µF
Tape width
Note: Values in shaded cells indicate thickness class (unit: mm)
106
1.25 ±0.2
12 mm
1.6 ±0.2
1.6 ±0.2
MLCC Selection Charts
X7R - Medium and High voltage, 1808 / 1812
X7R
Medium voltage & High voltage
Capacitance
1808
1000 V
2000 V
1812
3000 V
100 V
250 V
500 V
630 V
1000 V
2000 V
3000 V
100 pF
150 pF
220 pF
330 pF
1.6 ±0.2
470 pF
1.35 ±0.2
680 pF
1.0 nF
1.5 nF
2.2 nF
1.6 ±0.2
2.0 ±0.2
1.35 ±0.2
1.35 ±0.2
1.6 ±0.2
3.3 nF
4.7 nF
6.8 nF
10 nF
1.35 ±0.2
1.6 ±0.2
15 nF
22 nF
1.6 ±0.2
1.25 ±0.2
0.85 ±0.1
0.85 ±0.1
2.0 ±0.2
1.25 ±0.2
33 nF
1.6 ±0.2
47 nF
68 nF
1.25 ±0.2
100 nF
150 nF
220 nF
1.6 ±0.2
1.25 ±0.2
330 nF
1.6 ±0.2
470 nF
680 nF
1.6 ±0.2
1000 nF
2.2 µF
4.7 µF
10 µF
22 µF
47 µF
100 µF
Tape width
12 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
107
MLCC Selection Charts
X7R / X5R - Low inductance, 0306 to 0612
Features
• Good solution for anti resonance reduction with
controlled ESR
• Suitable for high speed IC decoupling due to low
inductance type
Temperature characteristic
∆C
C
(%)
Construction
15
10
5
0
-5
-10
-15
-55
-25
5
40
65
95
125
T ( C)
Dimensions
Discrete capacitors - Low inductance types only
Case size designation
W
T
L2
108
L4
L1
L3
Dimensions in mm
L2 / L3
L2 / L3
Inch-based
Metric
L1
W
T
0306
0816M
0.8 ±0.15
1.6 ±0.20
0.50 ±0.10
0.10
0.30
0.20
0508
1220M
1.25 ±0.20
2.0 ±0.20
0.85 ±0.10
0.13
0.46
0.38
0612
1632M
1.6 ±0.20
3.2 ±0.20
0.85 ±0.10
0.13
0.46
0.50
min
max
L4
min
MLCC Selection Charts
X7R / X5R - Low inductance, 0306 to 0612
X7R
Low Inductance series
Capacitance
0306
0508
10 V
10 V
0612
16 V
25 V
16 V
25 V
50 V
0.85 ±0.1
0.85 ±0.1
1.15 ±0.1
1.15 ±0.1
10 nF
22 nF
0.85 ±0.1
47 nF
100 nF
220 nF
0.85 ±0.1
0.5 ±0.1
470 nF
0.85 ±0.1
0.85 ±0.1
1000 nF
1.15 ±0.1
Tape width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
X5R
Low Inductance series
Capacitance
0306
6.3 V
10 V
16 V
100 nF
220 nF
470 nF
1000 nF
Tape width
0.5±0.1
0.5±0.1
0.5±0.1
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
109
MLCC Selection Charts
X7R - Soft termination, 0603 to 1812
Features
• Flexible termination system
• Improved resistance to thermal stresses
• Increased mechanical performance
Temperature characteristic
∆C
C
(%)
Construction
15
10
Copper
5
Soft electrode
(Stress relaxation)
0
Ni Plating
-5
Sn Plating
-10
-15
-55
-25
5
40
65
95
125
T ( C)
Dimensions
Discrete capacitors - Soft termination
Case size designation
Inch-based
W
L2
110
L4
L1
L3
Metric
Dimensions in mm
L1
W
L2 / L3 min
L2 / L3 max
L4 min
0603
1608M
1.6 ±0.20
0.8 ±0.15
0.20
0.50
0.40
0805
2012M
2.0 ±0.30
1.25 ±0.20
0.25
0.75
0.55
1206
3216M
3.2 ±0.40
1.6 ±0.20
0.25
0.85
1.40
1210
3225M
3.2 ±0.40
2.5 ±0.30
0.25
0.85
1.40
1812
4532M
4.5 ±0.40
3.2 ±0.20
0.25
0.85
2.20
MLCC Selection Charts
X7R - Soft termination, 0603 / 0805
X7R
Soft termination
Capacitance
0603
16 V
25 V
50 V
0805
100 V
250 V
50 V
100 V
250 V
500 V
630 V
1000 V
100 pF
150 pF
180 pF
220 pF
0.85 ±0.15 0.85 ±0.15
330 pF
390 pF
0.8 ±0.15
470 pF
680 pF
0.85 ±0.15
1.0 nF
1.5 nF
0.8 ±0.15
0.6 ±0.15
0.6 ±0.15
0.85 ±0.15
2.2 nF
3.3 nF
4.7 nF
0.8 ±0.15
0.8 ±0.15
6.8 nF 0.8 ±0.15
10 nF
15 nF
18 nF
22 nF
27 nF
1.25 ±0.2
0.85 ±0.15 0.85 ±0.15
33 nF
47 nF
68 nF
1.25 ±0.2
1.25 ±0.2
100 nF
150 nF
220 nF
330 nF
470 nF
680 nF
1000 nF
2.2 µF
4.7 µF
10 µF
22 µF
47 µF
100 µF
Tape width
12 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
111
MLCC Selection Charts
X7R - Soft termination, 1206
X7R
Soft termination
Capacitance
1206
16 V
25 V
50 V
100 V
250 V
500 V
630 V
1000 V
2000 V
100 pF
150 pF
180 pF
220 pF
330 pF
390 pF
1.25 ±0.2
470 pF
1.25 ±0.2
680 pF
1.0 nF
1.5 nF
0.85 ±0.15
2.2 nF
3.3 nF
0.85 ±0.15
4.7 nF
0.85 ±0.15
6.8 nF
10 nF
0.85 ±0.15
0.85 ±0.15
15 nF
18 nF
22 nF
1.25 ±0.2
27 nF
33 nF
47 nF
68 nF
100 nF
1.25 ±0.2
150 nF
220 nF
1.15 ±0.2
330 nF
1.15 ±0.2
470 nF
680 nF
1.6 ±0.2
1.15 ±0.2
1000 nF
2.2 µF
4.7 µF
10 µF
22 µF
47 µF
100 µF
Tape
width
Note: Values in shaded cells indicate thickness class (unit: mm)
112
12 mm
1.25 ±0.2
1.25 ±0.2
MLCC Selection Charts
X7R - Soft termination, 1210/ 1812
X7R
Soft termination
Capacitance
1210
16 V
25 V
50 V
1812
100 V
250 V
50 V
100 V
250 V
500 V
630 V
100 pF
150 pF
180 pF
220 pF
330 pF
390 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
1.25 ±0.2
6.8 nF
10 nF
15 nF
18 nF
0.85 ±0.15
0.85 ±0.15
0.85 ±0.15
0.85 ±0.15
1.6 ±0.2
0.85 ±0.15
0.85 ±0.15
1.25 ±0.2
0.85 ±0.15
22 nF
27 nF
1.25 ±0.2
33 nF
47 nF
1.15 ±0.2
68 nF
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
1.6 ±0.2
1.6 ±0.2
100 nF
150 nF
1.15 ±0.2
1.15 ±0.2
220 nF
1.6 ±0.2
1.6 ±0.2
330 nF
470 nF
680 nF
1000 nF
2.2 µF
4.7 µF
10 µF
22 µF
47 µF
100 µF
Tape
width
12mm
Note: Values in shaded cells indicate thickness class (unit: mm)
113
MLCC Selection Charts
X5R - General purpose & High capacitance, 01005 to 1812
Features
• Semi-stable on capacitance and high K
• High volumetric efficiency
• Highly reliable in high temperature application
• High insulation resistance
Temperature characteristic
∆C
C
(%)
Construction
15
10
5
0
-5
-10
-15
-60
-35
-10
15
40
65
90
T ( „ C)
Case dimensions
Discrete capacitors - General purpose & High capacitance
Case size designation
Metric
L1
01005
0402M
0.4±0.02
0402
0603
0603M
1005M
1608M
W
L4
L1
L3
0805
1206
2012M
3216M
1210
3225M
1808
4520M
1812
4532M
L2 / L3
max
L4
min
0.07
0.14
0.14
0.3 ±0.03
0.10
0.20
0.20
0.3 ±0.05
(2)
0.10
0.20
0.20
1.0 ±0.05 (1)
0.5 ±0.05 (1)
0.15
0.30
0.40
1.0 ±0.20 (2)
0.5 ±0.20 (2)
0.15
0.30
0.40
1.6 ±0.10 (1)
0.8 ±0.10 (1)
0.20
0.60
0.40
1.6 ±0.20 (2)
0.8 ±0.20 (2)
0.20
0.60
0.40
2.0 ±0.10 (1)
1.25 ±0.10 (1)
0.25
0.75
0.55
(2)
(2)
0.6 ±0.03
0.6 ±0.05
(2)
2.0 ±0.20
0.2±0.02
min
(1)
(1)
0.25
0.75
0.55
3.2 ±0.15 (1)
1.6 ±0.15 (1)
0.25
0.75
1.40
3.2 ±0.30 (2)
1.6 ±0.20 (2)
0.25
0.75
1.40
3.2 ±0.20 (1)
2.5 ±0.20 (1)
0.25
0.75
1.40
3.2 ±0.40 (2)
2.5 ±0.30 (2)
0.25
0.75
1.40
1.25 ±0.20
4.5 ±0.40
2.0 ±0.30
0.25
0.75
2.20
4.5 ±0.20 (1)
3.2 ±0.20 (1)
0.25
0.75
2.20
4.5 ±0.40 (2)
3.2 ±0.40 (2)
0.25
0.75
2.20
Note: 1. Dimension for size 0201, C < 1 μF; 0402, C < 4.7 μF; 0603, C < 10 μF; 0805 to 1812, C ≤ 100 nF
2. Dimension for size 0201, C ≥ 1 μF; 0402, C ≥ 4.7 μF; 0603, C ≥ 10 μF; 0805 to 1812, C > 100 nF
114
L2 / L3
W
Inch-based
0201
L2
Dimensions in mm
MLCC Selection Charts
X5R - General purpose & High capacitance, 01005 to 0402
X5R
General purpose & High capacitance
Capacitance
01005
6.3 V
0201
6.3 V
10 V
16 V
0402
25 V
50 V
6.3 V
10 V
16 V
25 V
50 V
0.5 ±0.05
0.5 ±0.05
0.5 ±0.05
0.5 ±0.05
0.5 ±0.05
100 pF
150 pF
220 pF
330 pF
0.3 ±0.03
470 pF
680 pF
1.0 nF 0.2 ±0.02
0.3 ±0.03
1.5 nF
2.2 nF
0.3 ±0.03
0.3 ±0.03
0.3 ±0.03
3.3 nF
4.7 nF
0.5 ±0.05
6.8 nF
10 nF
0.5 ±0.05
15 nF
0.5 ±0.05
22 nF
33 nF
47 nF
68 nF
100 nF
0.2 ±0.02
0.3 ±0.03
0.3 ±0.03
0.3 ±0.03
0.3 ±0.03
0.3 ±0.03
0.3 ±0.03
150 nF
220 nF
330 nF
470 nF
0.3 ±0.03
0.5 ±0.05
0.5 ±0.05
0.3 ±0.05
0.5 ±0.05
0.5 ±0.05
680 nF
1 000 nF
2.2 µF
4.7 µF
10 μF
Tape width
0.5 ±0.15
0.5 ±0.15
0.5 ±0.15
0.5 ±0.2
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
115
MLCC Selection Charts
X5R - General purpose & High capacitance, 0603 / 0805
X5R
General purpose & High capacitance
Capacitance
0603
6.3 V
10 V
16 V
0805
25 V
50 V
6.3 V
10 V
16 V
25 V
50 V
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
100 pF
150 pF
220 pF
330 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10 nF
15 nF
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
22 nF
33 nF
47 nF
68 nF
100 nF
0.85 ±0.1
150 nF
220 nF
330 nF
470 nF
1.25 ±0.2
680 nF
1 000 nF
2.2 µF
1.25 ±0.2
4.7 µF
10 µF
0.8 ±0.15
22 µF
0.8 ±0.2
0.8 ±0.2
0.8 ±0.15
0.8 ±0.15
0.8 ±0.2
0.8 ±0.2
47 µF
100 µF
Tape width
Note: Values in shaded cells indicate thickness class (unit: mm)
116
8 mm
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
MLCC Selection Charts
X5R - General purpose & High capacitance, 1206
X5R
General purpose & High capacitance
Capacitance
1206
6.3 V
10 V
16 V
25 V
50 V
100 pF
150 pF
220 pF
330 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
0.85 ±0.1
6.8 nF
10 nF
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
15 nF
22 nF
33 nF
47 nF
68 nF
100 nF
150 nF
1.15 ±0.1
220 nF
330 nF
1.0 ±0.1
470 nF
680 nF
1 000 nF
1.15 ±0.1
1.15 ±0.1
1.15 ±0.1
1.15 ±0.1
2.2 µF
4.7 µF
10 µF
22 µF
1.6 ±0.2
1.6 ±0.2
1.6 ±0.2
1.6 ±0.2
1.6 ±0.2
1.6 ±0.3
1.6 ±0.3
47 µF
100 µF
1.6 ±0.3
Tape width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
117
MLCC Selection Charts
X5R - High capacitance, 1210 / 1812
X5R
General purpose & High capacitance
Capacitance
1210
6.3 V
10 V
1812
16 V
25 V
50 V
6.3 V
100 pF
150 pF
220 pF
330 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10 nF
15 nF
22 nF
33 nF
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
47 nF
68 nF
100 nF
150 nF
220 nF
1.15 ±0.1
330 nF
470 nF
680 nF
1 000 nF
1.15 ±0.1
1.15 ±0.1
1.15 ±0.1
1.15 ±0.1
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
1.9 ±0.2
1.9 ±0.2
1.9 ±0.2
1.9 ±0.2
2.2 µF
4.7 µF
10 µF
22 µF
47 µF
100 µF
1.9 ±0.2
2.5 ±0.2
2.5 ±0.2
2.5 ±0.2
2.5 ±0.2
2.5 ±0.3
2.5 ±0.3
2.5 ±0.3
Tape width
Note: Values in shaded cells indicate thickness class (unit: mm)
118
1.25 ±0.2
2.5 ±0.3
2.5 ±0.2
3.2 ±0.3
8 mm
MLCC Selection Charts
Y5V - General purpose & High capacitance, 0201 to 1210
Features
• High volumetric efficiency
• Non-polar construction
Temperature characteristic
∆C
C
(%)
Construction
25
0
-25
-50
-75
-100
-30
-5
20
55
70
95
T ( C)
Case dimensions
Discrete capacitors - General purpose & High capacitance
Case size designation
Inch-based
0201
0402
W
L2
L4
L1
0603
0603M
1005M
1608M
L3
0805
1206
1210
Dimensions in mm
2012M
3216M
3225M
L2 / L3
L2 / L3
L1
W
0.6 ±0.03
0.3 ±0.03
0.10
0.20
0.20
0.6 ±0.05
0.3 ±0.05
Metric
min
max
L4
min
0.10
0.20
0.20
0.5 ±0.05
(1)
0.15
0.30
0.40
0.5 ±0.20
(2)
0.15
0.30
0.40
1.6 ±0.10 (1)
0.8 ±0.10 (1)
0.20
0.60
0.40
(2)
(2)
1.0 ±0.05
(1)
1.0 ±0.20
(2)
0.20
0.60
0.40
2.0 ±0.10 (1)
1.25 ±0.10 (1)
0.25
0.75
0.55
(2)
(2)
1.6 ±0.15
0.8 ±0.15
0.25
0.75
0.55
3.2 ±0.15 (1)
1.6 ±0.15 (1)
0.25
0.75
1.40
(2)
(2)
0.25
0.75
1.40
3.2 ±0.20 (1)
2.5 ±0.20 (1)
0.25
0.75
1.40
(2)
(2)
0.25
0.75
1.40
2.0 ±0.20
3.2 ±0.30
3.2 ±0.40
1.25 ±0.20
1.6 ±0.20
2.5 ±0.30
Note: 1. Dimension for size 0402, C < 4.7 μF; 0603, C < 10 μF; 0805 to 1210, C ≤ 100 nF
2. Dimension for size 0402, C ≥ 4.7 μF; 0603, C ≥ 10 μF; 0805 to 1210, C > 100 nF
119
MLCC Selection Charts
Y5V - General purpose & High capacitance 6.3 to 25V, 0201 / 0402
Y5V
General purpose & High capacitance
Capacitance
0201
6.3 V
0402
6.3 V
10 V
16 V
25 V
10 nF
22 nF
47 nF
0.3 ±0.03
100 nF
0.5 ±0.05
0.5 ±0.05
0.5 ±0.05
220 nF
470 nF
1 000 nF
Tape width
Note: Values in shaded cells indicate thickness class (unit: mm)
120
8 mm
0.5 ±0.05
MLCC Selection Charts
Y5V - General purpose & High capacitance 6.3 to 25V, 0603 / 0805
Y5V
General purpose & High capacitance
Capacitance
0603
6.3 V
10 V
0805
16 V
25 V
6.3 V
10 V
16 V
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
25 V
10 nF
22 nF
47 nF
100 nF
220 nF
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
470 nF
0.85 ±0.1
1 000 nF
2.2 µF
0.85 ±0.1
0.85 ±0.1
1.25 ±0.2
1.25 ±0.2
4.7 µF
0.85 ±0.1
1.25 ±0.2
1.25 ±0.2
10 µF
22 µF
Tape width
0.6 ±0.1
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
121
MLCC Selection Charts
Y5V - General purpose & High capacitance 6.3 to 25V, 1206 / 1210
Y5V
General purpose & High capacitance
Capacitance
1206
1210
6.3 V
10 V
16 V
25 V
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.85 ±0.1
0.85 ±0.1
1.6 ±0.2
1.6 ±0.2
6.3 V
10 V
16 V
25 V
1.5 ±0.1
10 nF
22 nF
47 nF
100 nF
220 nF
470 nF
1 000 nF
2.2 µF
0.85 ±0.1
0.85 ±0.1
4.7 µF
10 µF
22 µF
1.15 ±0.1
1.6 ±0.2
1.6 ±0.2
47 µF
Tape width
Note: Values in shaded cells indicate thickness class (unit: mm)
122
8 mm
1.5 ±0.1
1.5 ±0.1
1.5 ±0.1
1.6 ±0.2
1.6 ±0.2
1.6 ±0.2
MLCC Selection Charts
Y5V - General purpose & High capacitance 50V, 0402 to 1206
Y5V
General purpose & High capacitance
Capacitance
10 nF
0402
0603
0805
1206
50 V
50 V
50 V
50 V
0.5 ±0.05
22 nF
47 nF
0.6 ±0.1
0.8 ±0.1
0.6 ±0.1
100 nF
220 nF
0.85 ±0.1
470 nF
1 000 nF
1.25 ±0.2
2.2 µF
Tape width
0.85 ±0.1
1.15 ±0.1
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
123
MLCC Selection Charts
NP0 / X7R - Automotive grade, 0402 to 1210
Features
• Comply with AEC-Q200 standard
• MSL class: MSL 1
• J-STD-020D and TS-16949 compliant
• Halogen free epoxy
• RoHS compliant
Applications
• All general purpose applications
• Entertainment applications
• Comfort / security applications
• Information applications
Construction
Dimensions
Discrete capacitors - Automotive grade
Case size designation
W
L2
124
L4
L1
L3
Dimensions in mm
Inch-based
Metric
L1
W
L2 / L3 min
L2 / L3 max
L4 min
0402
1005M
1.0 ±0.05
0.5 ±0.05
0.15
0.30
0.40
0603
1608M
1.6 ±0.20
0.8 ±0.10
0.20
0.60
0.40
0805
2012M
2.0 ±0.20
1.25 ±0.20
0.25
0.75
0.55
1206
3216M
3.2 ±0.30
1.6 ±0.20
0.25
0.75
1.40
1210
3225M
3.2 ±0.30
2.5 ±0.20
0.25
0.75
1.40
MLCC Selection Charts
NP0 - Automotive grade, 0402 to 0805
NP0
Automotive Grade
Capacitance
0402
50 V
0603
50 V
100V
0805
250V
50 V
100 V
250 V
500 V
630 V
0.6 ±0.1
0.6 ±0.1
0.6 ±0.1
0.85 ±0.1
0.85 ±0.1
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
39 pF
47 pF
0.5 ±0.05
56 pF
68 pF
82 pF
0.8 ±0.1
100 pF
0.8 ±0.1
0.8 ±0.1
0.6 ±0.1
0.6 ±0.1
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
0.85 ±0.1
560 pF
680 pF
1.25 ±0.2
820 pF
1 000 pF
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
Tape width
8mm
Note: Values in shaded cells indicate thickness class (unit: mm)
125
MLCC Selection Charts
NP0 - Automotive grade, 1206 / 1210
NP0
Automotive Grade
Capacitance
1206
50 V
100 V
1210
250 V
500 V
0.6 ±0.1
0.6 ±0.1
630 V
50 V
100 V
250 V
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
500 V
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
39 pF
47 pF
56 pF
68 pF
82 pF
100 pF
1.25 ±0.2
120 pF
150 pF
180 pF
1.25 ±0.2
0.6 ±0.1
0.6 ±0.1
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1 000 pF
1.2 nF
0.85 ±0.1
0.85 ±0.1
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
Tape width
Note: Values in shaded cells indicate thickness class (unit: mm)
126
8mm
MLCC Selection Charts
X7R - Automotive grade, 0402 / 0603
X7R
Automotive grade
Capacitance
100 pF
150 pF
180 pF
220 pF
330 pF
390 pF
470 pF
680 pF
1 000 pF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10 nF
15 nF
18 nF
22 nF
27 nF
33 nF
47 nF
68 nF
100 nF
150 nF
220 nF
270 nF
330 nF
390 nF
470 nF
680 nF
1000 nF
2.2 μF
4.7 μF
10 μF
Tape width
0402
10 V
16 V
25 V
50 V
10 V
16 V
0603
25 V
50 V
100V
0.5 ±0.05
0.5 ±0.05
0.5 ±0.05
0.8 ±0.1
0.5 ±0.05
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
8mm
Note: Values in shaded cells indicate thickness class (unit: mm)
127
MLCC Selection Charts
X7R - Automotive grade, 0805
X7R
Capacitance
100 pF
150 pF
180 pF
220 pF
330 pF
390 pF
470 pF
680 pF
1 000 pF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10 nF
15 nF
18 nF
22 nF
27 nF
33 nF
47 nF
68 nF
100 nF
150 nF
220 nF
270 nF
330 nF
390 nF
470 nF
680 nF
1000 nF
2.2 μF
4.7 μF
10 μF
Tape width
10 V
16 V
100 V
250 V
500 V
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
Note: Values in shaded cells indicate thickness class (unit: mm)
128
Automotive grade
0805
25 V
50 V
1.25 ±0.2
8mm
MLCC Selection Charts
X7R - Automotive grade, 1206
X7R
Capacitance
100 pF
150 pF
180 pF
220 pF
330 pF
390 pF
470 pF
680 pF
1 000 pF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10 nF
15 nF
18 nF
22 nF
27 nF
33 nF
47 nF
68 nF
100 nF
150 nF
220 nF
270 nF
330 nF
390 nF
470 nF
680 nF
1000 nF
2.2 μF
4.7 μF
10 μF
Tape width
6.3 V
10 V
16 V
Automotive grade
1206
25V
50V
100V
250 V
0.85 ±0.1
500 V
630 V
1.25 ±0.2
1.25 ±0.2
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
1.25 ±0.2
1.25 ±0.2
1.15 ±0.2
1.6 ±0.2
1.15 ±0.2
1.15 ±0.2
1.15 ±0.2
1.6 ±0.2
1.15 ±0.2
8mm
Note: Values in shaded cells indicate thickness class (unit: mm)
129
MLCC Selection Charts
X7R - Automotive grade, 1210
X7R
Automotive grade
Capacitance
1210
6.3 V
10 V
16 V
25V
50V
100V
250 V
500 V
100 pF
150 pF
180 pF
220 pF
330 pF
390 pF
470 pF
680 pF
1 000 pF
1.5 nF
2.2 nF
3.3 nF
1.25 ±0.2
4.7 nF
0.85 ±0.1
6.8 nF
10 nF
15 nF
18 nF
0.85 ±0.1
0.85 ±0.1
22 nF
27 nF
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1
33 nF
1.25 ±0.2
47 nF
68 nF
100 nF
150 nF
1.25 ±0.2
220 nF
1.15 ±0.2
270 nF
330 nF
390 nF
470 nF
680 nF
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
1000 nF
2.2 μF
4.7 μF
10 μF
Tape width
Note: Values in shaded cells indicate thickness class (unit: mm)
130
12mm
MLCC Selection Charts
NP0 / X7R - High voltage SC type, 1808 / 1812
Features
• Capable of operating at high voltage levels
• For high frequency snubber
• Decoupling/ Smoothing function
• TUV certificate No.: 50031668
• UL certificate No.: E238900
Temperature characteristic
NP0
X7R
40
TC
(x10- 6/K)
20
∆C
C
(%)
15
10
5
0
0
-5
-20
-10
-40
-15
-40
0
40
80
120
-55
-25
5
40
65
95
125
T ( C)
T ( „ C)
Construction
Dimensions
Discrete capacitors - High voltage SC type
Case size designation
W
L2
L4
L1
L3
Dimensions in mm
L2 / L3
L2 / L3
Inch-based
Metric
L1
W
1808
4520M
4.8 ±0.30
2.0 ±0.30
0.25
0.75
1812
4532M
4.8 ±0.30
3.2 ±0.30
0.25
0.75
min
max
131
MLCC Selection Charts
NP0 - High voltage SC type, 1808 / 1812
NP0
X7R
1808
Capacitance
X1/Y2
for TUV
1808
X1/Y2
for UL
1812
X2/Y3
X2/Y3
for TUV/UL for TUV/UL
Capacitance
2 pF
150 pF
3.3 pF
180 pF
4.7 pF
220 pF
5 pF
240 pF
10 pF
270 pF
12 pF
330 pF
15 pF
390 pF
18 pF
22 pF
1.6 ±0.2
430 pF
1.6 ±0.2
470 pF
27 pF
1.6 ±0.2
33 pF
1 000 pF
1.2 nF
68 pF
Tape width
100 pF
150 pF
2.0 ±0.2
180 pF
2.0 ±0.2
2.0 ±0.2
270 pF
330 pF
2.0 ±0.2
470 pF
560 pF
680 pF
820 pF
1 000 pF
Tape width
1.6 ±0.2
1.6 ±0.2
2.0 ±0.2
2.0 ±0.2
1.6 ±0.2
1.6 ±0.2
2.0 ±0.2
2.0 ±0.2
12 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
120 pF
430 pF
X1 for UL
1.5 nF
82 pF
390 pF
X1/Y2
for TUV
820 pF
56 pF
240 pF
X1/Y2
X2/Y3
for TUV/UL for TUV/UL
560 pF
47 pF
220 pF
1812
680 pF
1.6 ±0.2
39 pF
12 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
132
1808
MLCC Selection Charts
NP0 / X7R / Y5V - 4C Arrays, 0508 / 0612
Features
• Less than 50% board space of an equivalent discrete
component
• High volumetric efficiency
• Increased throughput, by time saved in mounting
Temperature characteristic
NP0
X7R
40
TC
(x10- 6/K)
20
∆C
C
(%)
15
10
5
0
0
-5
-20
-10
-40
-15
0
-40
40
80
120
-55
T ( „ C)
∆C
C
5
40
65
95
125
T ( C)
Temperature characteristic
Y5V
-25
Construction
25
(%)
0
-25
-50
-75
-100
-30
-5
20
55
70
95
T ( C)
133
MLCC Selection Charts
NP0 / X7R / Y5V - 4C Arrays, 0508 / 0612
Dimensions
4C arrays
Case size designation
B
W
L
A
P
T
Note: 1. Available for NP0 and X7R
2. Available for Y5V
134
Dimensions in mm
Inch-based
Metric
L
W
Tmin
Tmax
A
B
P
0508
(4 x 0402)
1220M
(4 x 1005)
2.0 ±0.15
1.25 ±0.15
0.50
0.70
0.28 ±0.10
0.2 ±0.10
0.5 ±0.10
0612
(4 x 0603)
1632M
(4 x 1608)
3.2 ±0.15
1.60 ±0.15
0.4 ±0.10
0.3 ±0.20
0.8 ±0.10
0.70
(1)
0.90
(1)
0.50
(2)
0.70
(2)
MLCC Selection Charts
NP0 - 4C Arrays, 0508 / 0612
NP0
4C arrays
Capacitance
0508
50 V
0612
100 V
50 V
100 V
0.8 ±0.1
0.8 ±0.1
10 pF
15 pF
18 pF
22 pF
27 pF
47 pF
0.6 ±0.1
0.6 ±0.1
100 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1 000 pF
Tape width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
135
MLCC Selection Charts
X7R - 4C Arrays, 0508 / 0612
X7R
4C arrays
Capacitance
0508
16 V
25 V
0612
50 V
16 V
25 V
50 V
0.8 ±0.1
0.8 ±0.1
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1 000 pF
0.6 ±0.1
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
0.6 ±0.1
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
0.6 ±0.1
12 nF
15 nF
18 nF
22 nF
27 nF
0.8 ±0.1
33 nF
47 nF
56 nF
68 nF
82 nF
100 nF
Tape width
Note: Values in shaded cells indicate thickness class (unit: mm)
136
8 mm
MLCC Selection Charts
Y5V - 4C Arrays, 0612
Y5V
4C arrays
Capacitance
0612
25 V
10 nF
22 nF
47 nF
0.6 ±0.1
100 nF
Tape width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
137
MLCC Engineering Design Kits
Sample kits for 0201 / 0402
0201 sample kits
NP0 50 V
Capacitance (pF)
1
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
Tolerance
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.50 pF
±0.50 pF
±0.50 pF
±5%
±5%
±5%
±5%
±5%
NP0 25 V
Capacitance (pF)
Tolerance
27
±5%
33
±5%
39
±5%
47
±5%
56
±5%
68
±5%
82
±5%
100
±5%
Y5V 6.3V
Capacitance (pF)
Tolerance
100 000
-20% to +80%
X5R 6.3V
Capacitance (pF)
Tolerance
100 000
±10%
X7R 50 V
Capacitance (pF)
47
68
100
150
220
330
470
X7R 25 V
Capacitance (pF)
680
1 000
X7R 16V
Capacitance (pF)
1 500
2 200
3 300
X7R 10 V
Capacitance (pF)
10 000
Tolerance
±10%
±10%
±10%
±10%
±10%
±10%
±10%
Tolerance
±10%
±10%
Tolerance
±10%
±10%
±10%
Tolerance
±10%
Note: 100 pieces per value. Ordering code CC020100000000000 for Yageo brand product
0402 sample kits
NP0 50 V
Capacitance (pF)
1
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
Tolerance
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.50 pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
Y5V 16 V
Capacitance (pF)
10 000
22 000
47 000
100 000
X5R 25V
Capacitance (pF)
100 000
±5%
Tolerance
±20%
±20%
±20%
±20%
Tolerance
±10%
X7R 50 V
Capacitance (pF)
100
150
220
330
470
680
1 000
1 500
2 200
3 300
X7R 25 V
Capacitance (pF)
4 700
100 000
138
Tolerance
±10%
±10%
X7R 16 V
Capacitance (pF)
6 800
10 000
15 000
22 000
Note: 95 pieces per value. Ordering code CC040200000000000 for Yageo brand product
Tolerance
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
Tolerance
±10%
±10%
±10%
±10%
MLCC Engineering Design Kits
Sample kits for 0603 / 0805
0603 sample kits
NP0 50 V
Capacitance (pF)
1
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
680
Tolerance
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.50 pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
NP0 25 V
Capacitance (pF)
1 000
1 500
Y5V 50 V
Capacitance (pF)
10 000
22 000
47 000
100 000
Y5V 16 V
Capacitance (pF)
220 000
470 000
Tolerance
±5%
±5%
Tolerance
±20%
±20%
±20%
±20%
Tolerance
±20%
±20%
X7R 50 V
Capacitance (pF)
100
150
220
330
470
680
1 000
1 500
2 200
3 300
4 700
6 800
10 000
X7R 25 V
Capacitance (pF)
15 000
22 000
X7R 16 V
Capacitance (pF)
33 000
47 000
68 000
100 000
Tolerance
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
Tolerance
±10%
±10%
Tolerance
±10%
±10%
±10%
±10%
Note: 48 pieces per value. Ordering code CC060300000000000 for Yageo brand product
0805 sample kits
NP0 50 V
Capacitance (pF)
1
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
680
1 000
1 500
2 200
Tolerance
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.50 pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
NP0 25 V
Capacitance (pF)
3 300
4 700
Y5V 50 V
Capacitance (pF)
10 000
22 000
47 000
100 000
220 000
Y5V 16 V
Capacitance (pF)
470 000
1 000 000
Tolerance
±5%
±5%
Tolerance
±20%
±20%
±20%
±20%
±20%
Tolerance
±20%
±20%
X7R 50 V
Capacitance (pF)
220
330
470
680
1 000
1 500
2 200
3 300
4 700
6 800
10 000
15 000
22 000
33 000
47 000
68 000
100 000
X7R 16 V
Capacitance (pF)
150 000
220 000
330 000
470 000
Tolerance
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
Tolerance
±10%
±10%
±10%
±10%
Note: 48 pieces per value. Ordering code CC080500000000000 for Yageo brand product
139
MLCC Engineering Design Kits
Sample kits for 1206
1206 sample kits
NP0 50 V
Capacitance (pF)
1
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
680
1 000
1 500
2 200
3 300
4 700
6 800
Tolerance
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.25 pF
±0.50 pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
NP0 25 V
Capacitance (pF)
10 000
Y5V 50 V
Capacitance (pF)
100 000
220 000
470 000
1 000 000
Note: 48 pieces per value. Ordering code CC120600000000000 for Yageo brand product
140
Tolerance
±5%
Tolerance
±20%
±20%
±20%
±20%
X7R 50 V
Capacitance (pF)
220
330
470
680
1 000
1 500
2 200
3 300
4 700
6 800
10 000
15 000
22 000
33 000
47 000
68 000
100 000
150 000
220 000
X7R 16 V
Capacitance (pF)
330 000
470 000
680 000
1 000 000
Tolerance
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
Tolerance
±10%
±10%
±10%
±10%
MLCC Engineering Design Kits
Sample kits for high capacitance series
High capacitance sample kits
Capacitance
1 µF
1 µF
2.2 µF
Capacitance
1 µF
1 µF
2.2 µF
2.2 µF
2.2 µF
4.7 µF
4.7 µF
10 µF
Capacitance
2.2 µF
4.7 µF
4.7 µF
4.7 µF
10 µF
10 µF
10 µF
22 µF
Capacitance
4.7 µF
4.7 µF
10 µF
10 µF
22 µF
X5R 0402
Rated voltage
6.3 V
10 V
6.3 V
X5R 0603
Rated voltage
16 V
25 V
6.3 V
10 V
16 V
6.3 V
10 V
6.3 V
X5R 0805
Rated voltage
25 V
6.3 V
10 V
16 V
6.3 V
10 V
16 V
6.3 V
X5R 1206
Rated voltage
16 V
25 V
16 V
25 V
6.3 V
Tolerance
±10%
±10%
±20%
Tolerance
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±20%
Capacitance
1 µF
Capacitance
1 µF
2.2 µF
2.2 µF
Capacitance
1 µF
2.2 µF
4.7 µF
10 µF
X7R 0603
Rated voltage
16 V
X7R 0805
Rated voltage
25 V
16 V
25 V
X7R 1206
Rated voltage
25 V
25 V
25 V
16 V
Tolerance
±10%
Tolerance
±10%
±10%
±10%
Tolerance
±10%
±10%
±10%
±10%
Tolerance
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±20%
Capacitance
1 µF
1 µF
Capacitance
1 µF
1 µF
2.2 µF
2.2 µF
4.7 µF
Capacitance
1 µF
1 µF
1 µF
2.2 µF
4.7 µF
10 µF
Capacitance
4.7 µF
10 µF
10 µF
22 µF
Y5V 0402
Rated voltage
6.3 V
10 V
Y5V 0603
Rated voltage
10 V
16 V
10 V
16 V
6.3 V
Y5V 0805
Rated voltage
16 V
25 V
50 V
16 V
10 V
10 V
Y5V 1206
Rated voltage
16 V
10 V
16 V
16 V
Tolerance
-20% to +80%
-20% to +80%
Tolerance
-20% to +80%
-20% to +80%
-20% to +80%
-20% to +80%
-20% to +80%
Tolerance
-20% to +80%
-20% to +80%
-20% to +80%
-20% to +80%
-20% to +80%
-20% to +80%
Tolerance
-20% to +80%
-20% to +80%
-20% to +80%
-20% to +80%
Tolerance
±10%
±10%
±10%
±10%
±20%
Note: 50 pieces per value. Ordering code CC888800000000000 for Yageo brand product
High capacitance sample kits for smart phone
Capacitance
100 nF
100 nF
220 nF
470 nF
1 μF
Capacitance
1 μF
1 μF
1 μF
2.2 μF
4.7 μF
10 μF
X5R 0201
Rated voltage
6.3 V
10 V
6.3 V
6.3 V
6.3 V
X5R 0402
Rated voltage
6.3 V
10 V
16 V
6.3 V
6.3 V
6.3 V
Tolerance
±10%
±10%
±20%
±20%
±20%
Tolerance
±10%
±10%
±10%
±20%
±20%
±20%
Capacitance
1 μF
1 μF
2.2 μF
2.2 μF
4.7 μF
4.7 μF
10 μF
22 μF
X5R 0603
Rated voltage
16 V
25 V
10 V
16 V
6.3 V
10 V
6.3 V
6.3 V
Tolerance
±10%
±10%
±10%
±10%
±10%
±10%
±20%
±20%
Capacitance
2.2 μF
2.2 μF
4.7 μF
4.7 μF
4.7 μF
4.7 μF
10 μF
10 μF
10 μF
22 μF
47 μF
Capacitance
10 μF
10 μF
22 μF
47 μF
X5R 0805
Rated voltage
16 V
25 V
6.3 V
10 V
16 V
25 V
6.3 V
10 V
16 V
6.3 V
6.3 V
X5R 1206
Rated voltage
16 V
25 V
6.3 V
6.3 V
Tolerance
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±20%
±20%
Tolerance
±10%
±10%
±10%
±20%
Note: 50 pieces per value. Ordering code SP888800000000000 for Yageo brand product
141
MLCC Engineering Design Kits
High voltage sample kits for general applications
High voltage sample kits for general applications
Capacitance
10 pF
100 pF
1 nF
10 pF
100 pF
Capacitance
10 pF
100 pF
1 nF
10 pF
100 pF
Capacitance
10 pF
100 pF
1 nF
10 pF
100 pF
10 pF
100 pF
Capacitance
10 pF
100 pF
1 nF
10 pF
100 pF
1 nF
10 pF
100 pF
NP0 1206
Rated voltage
1 kV
1 kV
1 kV
2 kV
2 kV
NP0 1210
Rated voltage
1 kV
1 kV
1 kV
2 kV
2 kV
NP0 1808
Rated voltage
1 kV
1 kV
1 kV
3 kV
3 kV
2 kV
2 kV
NP0 1812
Rated voltage
2 kV
2 kV
2 kV
1 kV
1 kV
1 kV
3 kV
3 kV
Tolerance
±5%
±5%
±5%
±5%
±5%
Tolerance
±5%
±5%
±5%
±5%
±5%
Tolerance
±5%
±5%
±5%
±5%
±5%
±5%
±5%
Tolerance
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
Note: 50 pieces per value. Ordering code HV777700000000000 for Yageo brand product
142
Capacitance
10 nF
1 nF
1 nF
Capacitance
1 nF
10 nF
1 nF
Capacitance
10 nF
1 nF
1 nF
1 nF
Capacitance
10 nF
1 nF
10 nF
X7R 1206
Rated voltage
1 kV
2 kV
1 kV
X7R 1210
Rated voltage
1 kV
1 kV
2 kV
X7R 1808
Rated voltage
1 kV
3 kV
1 kV
2 kV
X7R 1812
Rated voltage
2 kV
1 kV
1 kV
Tolerance
±10%
±10%
±10%
Tolerance
±10%
±10%
±10%
Tolerance
±10%
±10%
±10%
±10%
Tolerance
±10%
±10%
±10%
MLCC Engineering Design Kits
Sample kits for high frequency series
High frequency sample kits
Capacitance
0.2pF
0.3pF
0.4pF
0.5pF
0.6pF
0.7pF
0.8pF
0.9pF
1.0pF
1.1pF
1.2pF
1.3pF
1.5pF
Rated voltage Tolerance
25 V
±0.1pF
25 V
±0.1pF
25 V
±0.1pF
25 V
±0.1pF
25 V
±0.1pF
25 V
±0.1pF
25 V
±0.1pF
25 V
±0.1pF
25 V
±0.1pF
25 V
±0.1pF
25 V
±0.1pF
25 V
±0.1pF
25 V
±0.1pF
Capacitance
1.6pF
1.8pF
2.0pF
2.2pF
2.4pF
2.7pF
3.0pF
3.3pF
3.6pF
3.9pF
4.0pF
4.3pF
4.7pF
NP0 0201
Rated voltage Tolerance
25 V
±0.1pF
25 V
±0.1pF
25 V
±0.1pF
25 V
±0.1pF
25 V
±0.1pF
25 V
±0.1pF
25 V
±0.1pF
25 V
±0.1pF
25 V
±0.1pF
25 V
±0.1pF
25 V
±0.1pF
25 V
±0.1pF
25 V
±0.1pF
Capacitance
5.0pF
5.6pF
6.0pF
6.2pF
6.8pF
7.0pF
7.5pF
8.0pF
8.2pF
9.0pF
9.1pF
10pF
Rated voltage Tolerance
25 V
±0.25pF
25 V
±0.25pF
25 V
±0.25pF
25 V
±0.25pF
25 V
±0.25pF
25 V
±0.25pF
25 V
±0.25pF
25 V
±0.25pF
25 V
±0.25pF
25 V
±0.25pF
25 V
±0.25pF
25 V
±5%
Capacitance
6.8pF
7.0pF
7.5pF
8.0pF
8.2pF
9.0pF
9.1pF
10pF
12pF
15pF
18pF
22pF
27pF
33pF
Rated voltage Tolerance
50V
±0.25pF
50V
±0.25pF
50V
±0.25pF
50V
±0.25pF
50V
±0.25pF
50V
±0.25pF
50V
±0.25pF
50V
±5%
50V
±5%
50V
±5%
50V
±5%
50V
±5%
50V
±5%
50V
±5%
Note: 10 pieces per value. Ordering code CQ0201000000SB000 for Yageo brand product
High frequency sample kits
Capacitance
0.2pF
0.3pF
0.4pF
0.5pF
0.6pF
0.7pF
0.8pF
0.9pF
1.0pF
1.1pF
1.2pF
1.3pF
1.5pF
1.6pF
1.8pF
Rated voltage Tolerance
50V
±0.1pF
50V
±0.1pF
50V
±0.1pF
50V
±0.1pF
50V
±0.1pF
50V
±0.1pF
50V
±0.1pF
50V
±0.1pF
50V
±0.1pF
50V
±0.1pF
50V
±0.1pF
50V
±0.1pF
50V
±0.1pF
50V
±0.1pF
50V
±0.1pF
Capacitance
2.0pF
2.2pF
2.4pF
2.7pF
3.0pF
3.3pF
3.6pF
3.9pF
4.0pF
4.3pF
4.7pF
5.0pF
5.6pF
6.0pF
6.2pF
NP0 0402
Rated voltage Tolerance
50V
±0.1pF
50V
±0.1pF
50V
±0.1pF
50V
±0.1pF
50V
±0.1pF
50V
±0.1pF
50V
±0.1pF
50V
±0.1pF
50V
±0.1pF
50V
±0.1pF
50V
±0.1pF
50V
±0.25pF
50V
±0.25pF
50V
±0.25pF
50V
±0.25pF
Note: 10 pieces per value. Ordering code CQ0402000000SB000 for Yageo brand product
143
MLCC Engineering Design Kits
Sample kits for high frequency series
High frequency sample kits
NP0 0603
Capacitance
Rated voltage Tolerance
Capacitance
Rated voltage Tolerance
Capacitance
Rated voltage Tolerance
0.2pF
250 V
±0.1pF
2.0pF
250 V
±0.1pF
6.8pF
250 V
±0.25pF
0.3pF
250 V
±0.1pF
2.2pF
250 V
±0.1pF
7.0pF
250 V
±0.25pF
0.4pF
250 V
±0.1pF
2.4pF
250 V
±0.1pF
7.5pF
250 V
±0.25pF
0.5pF
250 V
±0.1pF
2.7pF
250 V
±0.1pF
8.0pF
250 V
±0.25pF
0.6pF
250 V
±0.1pF
3.0pF
250 V
±0.1pF
8.2pF
250 V
±0.25pF
0.7pF
250 V
±0.1pF
3.3pF
250 V
±0.1pF
9.0pF
250 V
±0.25pF
0.8pF
250 V
±0.1pF
3.6pF
250 V
±0.1pF
9.1pF
250 V
±0.25pF
0.9pF
250 V
±0.1pF
3.9pF
250 V
±0.1pF
10pF
250 V
±5%
1.0pF
250 V
±0.1pF
4.0pF
250 V
±0.1pF
12pF
250 V
±5%
1.1pF
250 V
±0.1pF
4.3pF
250 V
±0.1pF
15pF
250 V
±5%
1.2pF
250 V
±0.1pF
4.7pF
250 V
±0.1pF
18pF
250 V
±5%
1.3pF
250 V
±0.1pF
5.0pF
250 V
±0.25pF
22pF
250 V
±5%
1.5pF
250 V
±0.1pF
5.6pF
250 V
±0.25pF
27pF
250 V
±5%
1.6pF
250 V
±0.1pF
6.0pF
250 V
±0.25pF
33pF
250 V
±5%
1.8pF
250 V
±0.1pF
6.2pF
250 V
±0.25pF
47pF
250 V
±5%
Note: 10 pieces per value. Ordering code CQ0603000000SB000 for Yageo brand product
High frequency sample kits
NP0 0805
Capacitance
Rated voltage Tolerance
Capacitance
Rated voltage Tolerance
Rated voltage Tolerance
0.2pF
250 V
±0.1pF
2.4pF
250 V
±0.1pF
8.2pF
250 V
±0.25pF
0.3pF
250 V
±0.1pF
2.7pF
250 V
±0.1pF
9.0pF
250 V
±0.25pF
0.4pF
250 V
±0.1pF
3.0pF
250 V
±0.1pF
9.1pF
250 V
±0.25pF
0.5pF
250 V
±0.1pF
3.3pF
250 V
±0.1pF
10pF
250 V
±5%
0.6pF
250 V
±0.1pF
3.6pF
250 V
±0.1pF
12pF
250 V
±5%
0.7pF
250 V
±0.1pF
3.9pF
250 V
±0.1pF
15pF
250 V
±5%
0.8pF
250 V
±0.1pF
4.0pF
250 V
±0.1pF
18pF
250 V
±5%
0.9pF
250 V
±0.1pF
4.3pF
250 V
±0.1pF
22pF
250 V
±5%
1.0pF
250 V
±0.1pF
4.7pF
250 V
±0.1pF
27pF
250 V
±5%
1.1pF
250 V
±0.1pF
5.0pF
250 V
±0.25pF
33pF
250 V
±5%
1.2pF
250 V
±0.1pF
5.6pF
250 V
±0.25pF
47pF
250 V
±5%
1.3pF
250 V
±0.1pF
6.0pF
250 V
±0.25pF
56pF
250 V
±5%
1.5pF
250 V
±0.1pF
6.2pF
250 V
±0.25pF
68pF
250 V
±5%
1.6pF
250 V
±0.1pF
6.8pF
250 V
±0.25pF
82pF
250 V
±5%
1.8pF
250 V
±0.1pF
7.0pF
250 V
±0.25pF
100pF
250 V
±5%
2.0pF
250 V
±0.1pF
7.5pF
250 V
±0.25pF
2.2pF
250 V
±0.1pF
8.0pF
250 V
±0.25pF
Note: 10 pieces per value. Ordering code CQ0805000000SB000 for Yageo brand product
144
Capacitance
SMD CERAMIC EMI FILTER CAPACITORS
X2Y ® PRODUCTS
X2Y® Product Selection Charts
SMD ceramic EMI filter capacitors X2Y® series
Features
• Broadband Filtering and Decoupling: X2Y® is effective up to 10
GHz and frequencies beyond
• Ultra Low ESL: Noise cancellation within X2Y® makes ESL
reducing from nanohenry to picohenry levels
• Bypass: Unlike feedthrough capacitors, X2Y® is in bypass, so no
DC current limitations
• Matched Y-caps: Two tightly matched line to ground capacitors in
one device
• Superior Balance: Temperature and voltage variations balanced of
two Y-caps
• Aging Reliability: Aging effects are equal on two Y-caps
Circuit of typical applications
SCM049_V
A
A
G1
A
G2
G2
G2
G1
B
B
B
G1
Decoupling application
146
Benefits
Applications
• Fewer Components in Filtering: One X2Y® can replace multiple
inductors and/or capacitors
• Superior Performance in Filtering: One X2Y® can eliminate both
differential and common mode noises
• Fewer Components in Decoupling: Up to 1:7 replacement of MLCC
in power delivering system bypass networks
• Superior Performance in Decoupling: Large or small, X2Y®
components exhibit ultra low ESL
• Total Cost Savings: Assembly cost savings through reduced
component count and placement costs
• Board Level Design Advantages: Dramatically reduces via drills,
which blocks routing
•
•
•
•
•
•
•
•
•
•
•
•
EMI filtering application
EMI filtering on DC motors
Filtered connectors (airbag connectors, RJ-45 connectors)
High speed data-line filtering
Decoupling of supply-lines in high speed digital circuits
Broadband filtering
Amplifier decoupling and EMI suppression
IC Decoupling, on-package, on-PCB
DC power line filtering
Data line filtering
EMI suppression for DC motors
Sensors
Audio
X2Y® Product Selection Charts
Ordering information
X7R
Y-Capacitor
Size
0603
0805
1206
1210
1410
Voltage rating
(V)
Thickness
(mm)
Global part number
Capacitance
(nF)
TOLERANCE
( %)
1
1
1.5
1.5
2.2
4.7
5.6
5.6
10
22
47
56
100
220
1
4.7
10
15
18
22
22
39
47
100
180
15
22
47
100
220
390
470
100
220
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
20%
100
16
100
50
100
100
100
50 / 63
50 / 63
25
16
16
10
10
100
100
100
50 / 63
50 / 63
50 / 63
25
25
16
16
10
100
100
50 / 63
50 / 63
16
16
10
50
50
390
20%
50
470
560
820
1000
390
20%
20%
20%
20%
20%
25
25
16
16
50
1.30
Voltage rating
(V)
Thickness
(mm)
Global part number
0.65
CX 0603 MR X5R 6BB 224
CX 0603 MR X5R 6BB 334
CX 0603 MR X5R 6BB 474
CX 0603 MR X5R 5BB 474
0.65
0.85
1.20
CX 0603 MR X7R 0BB 102
CX 0603 MR X7R 7BB 102
CX 0603 MR X7R 0BB 152
CX 0603 MR X7R 9BB 152
CX 0603 MR X7R 0BB 222
CX 0603 MR X7R 0BB 472
CX 0603 MR X7R 0BB 562
CX 0603 MR X7R 9BB 562
CX 0603 MR X7R 9BB 103
CX 0603 MR X7R 8BB 223
CX 0603 MR X7R 7BB 473
CX 0603 MR X7R 7BB 563
CX 0603 MR X7R 6BB 104
CX 0603 MR X7R 6BB 224
CX 0805 MR X7R 0BB 102
CX 0805 MR X7R 0BB 472
CX 0805 MR X7R 0BB 103
CX 0805 MR X7R 9BB 153
CX 0805 MR X7R 9BB 183
CX 0805 MR X7R 9BB 223
CX 0805 MR X7R 8BB 223
CX 0805 MR X7R 8BB 393
CX 0805 MR X7R 7BB 473
CX 0805 MR X7R 7BB 104
CX 0805 MR X7R 6BB 184
CX 1206 MK X7R 0BB 153
CX 1206 MK X7R 0BB 223
CX 1206 MK X7R 9BB 473
CX 1206 MK X7R 9BB 104
CX 1206 MK X7R 7BB 224
CX 1206 MK X7R 7BB 394
CX 1206 MK X7R 6BB 474
CX 1210 MK X7R 9BB 104
CX 1210 MK X7R 9BB 224
CX 1210 MK X7R 9BB 394
1.60
CX 1210 MK X7R 8BB 474
CX 1210 MK X7R 8BB 564
CX 1210 MK X7R 7BB 824
CX 1210 MK X7R 7BB 105
CX 1410 MK X7R 9BB 394
X5R
Y-Capacitor
Size
0603
Capacitance
(nF)
TOLERANCE
( %)
220
330
470
470
20%
20%
20%
20%
10
10
10
6.3
Note: 1. Special values are available on request
147
X2Y® Product Selection Charts
Ordering information
NP0
Y-Capacitor
Size
0603
0805
Capacitance
(nF)
0.01
0.022
0.033
0.047
0.1
0.22
0.47
0.01
0.022
0.047
TOLERANCE
( %)
20%
Voltage rating
(V)
100
100
100
100
50
50
50
50
50
50
Thickness
(mm)
Global part number
0.85
CX 0603 MR NPO 0BB 100
CX 0603 MR NPO 0BB 220
CX 0603 MR NPO 0BB 330
CX 0603 MR NPO 0BB 470
CX 0603 MR NPO 9BB 101
CX 0603 MR NPO 9BB 221
CX 0603 MR NPO 9BB 471
CX 0805 MR NPO 9BB 100
CX 0805 MR NPO 9BB 220
CX 0805 MR NPO 9BB 470
Note: 1. Special values are available on request
Thickness classes and packing quantities
Quantity per reel
8 mm tape width
Ø180mm / 7”
0603 - 1410
Thickness
Classification
(mm)
0.60 ±0.10
0.85 ±0.10
1.20 ±0.15
1.60 ±0.15
1.90 ±0.20
Note: 1. Special values are available on request
148
Paper
4 000
4 000
-------
Blister
----3 000
2 000
2 000
X2Y® Product Selection Charts
Ordering information
Global part number
Ordering example: CX0603MKX7R6BB104
CX
0603
Series name (code 1-2)
CX = X2Y ®‑series
Size code (code 3-6)
EIA
mm
0603 (1608M)
0805 (2012M)
1206 (3216M)
1210 (3225M)
1410 (3625M)
Capacitance tolerance (code 7)
M = ±20%
Packing style (code 8)
R = Paper tape reel Ø7"
K = Embossed plastic tape reel Ø7"
TC material (code 9-11)
NP0
X7R
X5R
M K X7R 6 B B
104
Capacitance value (code 15-17)
104 = 100 000 pF
(2 significant digits+number of zeros;
the 3rd digit signifies the multiplying
factor, and letter R is decimal point)
0=x1
1 = x 10 1
2 = x 10 2
3 = x 10 3
4 = x 10 4
5 = x 10 5
6 = x 10 6
Process code (code 14)
B = BME
Termination (code 13)
B = Ni-barrier
Rated voltage (code 12)
5 = 6.3 V
6 = 10 V
7 = 16 V
8 = 25 V
9 = 50 V
0 = 100 V
149
WIRELESS COMPONENTS
Wireless Components Product Selection Charts
Introduction
Introduction
Yageo produces a comprehensive range of wireless components, inclding metal/PCB/FPCB antenna, patch antenna
(ceramic bulk), active antenna (LNA circuit), chip antenna, and RF components (filter/balancer).
Our products cover a wide variety of wireless communication protocols, including Bluetooth & IEEE 802.11b/g, WPAN
(Wireless Personal Area Network), WLAN (Wireless Local Area Network), WMAN (Wireless Metropolitan Area
Network), WWAN (Wireless Wide Area Network) and LTE (Long Term Evolution).
Wireless Components
Antenna
Metal
PCB
LTCC / Ceramic
FPCB
Patch / Ceramic
LTCC Balun/ Filter/ Balun + Filter (Combo) / X2Y
Balun
Balun + Filter
Filter
X2Y Filter
Yageo Antenna Portfolio
Cellular WWAN
(GSM/CDMA/UMTS/LTE)
700/824 MHz 960MHz
169 MHz 315 & 433 MHz
Short-Range
(UHF/Sub-GHz)
152
Frequency
1 GHz = 1,000 MHz
1710 - 2170 MHz
868 & 915 MHz 1575 & 1602 MHz
GPS & Glonass
2.4 - 2.5 GHz
4.9/5.15-5.875 GHz
2.4 & 5 GHz
(BT/WiFi/ZigBee)
FEM Substrate
Wireless Components Selection Charts
Introduction
Portable devices, home appliances, industrial/medical equipment will be equipped with wireless connectivity for Peer-to-Peer data
exchange. More wireless components are needed.
Surveillance
Smart Energy
Mobile
Medical
PC
Automotive
Key features of wireless components
Compact
• Maximize performance with the smallest size required
• The smallest 2.4/5 GHz antenna: PCB 18.4x7.5 mm / LTCC 2x1.25 mm
Multi-Band & High Efficiency
• WWAN: Quad-band (850/900/1800/1900 MHz) to Penta-band (850/900/1800/1900/2100 MHz)
• Support 4G cellular network LTE 700 MHz (Band 12,13,17), 2300/2600 MHz
• Multi-band 2.3/2.4/2.7 & 5 GHz supporting WLAN/WiMAX/LTE
• Operating in dual navigational systems GPS & Glonass: 1575 – 1602 MHz
High Reliability
• Operating temperature range: -40°C ~ 105°C
• Operating humidity 95% RH at 40°C
• Vibration verification
Easy Installation
• Reliable adhesive tape, surface mount, and flexible cable/connector selection
153
Wireless Components Selection Charts
Antenna - 2.4 GHz
2.4 GHz
Model
Part No./ Description
Electrical Data
Mechanical Data
ANT1204F001R2400A /
Freq. Range: 2400~2500 MHz
Size (mm) : 12*4*2.0
CAN4311059012451K
VSWR*: 2.0 (Max)
Operating Temp.: -40 ~ 105°C
Polarization: Linear
RoHS Compliance
1204 2.4GHz PIFA Chip Antenna
ANT1004F002R2400A /
CAN4311041022451K
1004 2.4GHz PIFA Chip Antenna
ANT9520LL06R2400A /
CAN4311795062452K
9520 2.4GHz Chip Antenna
Freq. Range: 2400~2500 MHz
*
Size (mm) : 10*4*2.0
VSWR : 2.0 (Max)
Operating Temp.: -40 ~ 105°C
Polarization: Linear
RoHS Compliance
Peak Gain : 1.55 dBi(Typ.)
Freq. Range: 2400~2500 MHz
*
Size (mm) : 9.5*2.0*1.2
VSWR : 2.5 (Max)
Operating Temp.: -40 ~ 105°C
Polarization: Linear
RoHS Compliance
Peak Gain : 2.85 dBi(Typ.)
ANT8010LL04R2400A /
Freq. Range: 2400~2500 MHz
CAN4311781042453K
VSWR*: 2.0 (Max)
Operating Temp.: -40 ~ 105°C
Polarization: Linear
RoHS Compliance
8010 2.4GHz Chip Antenna
Size (mm) : 8.0*1.0*1.0
Peak Gain : 5.88 dBi(Typ.)
ANT7836A003R2400A /
Freq. Range: 2400~2500 MHz
CAN4311278032451K
VSWR*: 2.0 (Max)
Operating Temp.: -40 ~ 105°C
Polarization: Linear
RoHS Compliance
7836 2.4GHz Chip Antenna
Size (mm) : 7.8*3.6*0.5
Peak Gain : 3.93 dBi dBi(Typ.)
ANT7020LL05R2400A /
Freq. Range: 2400~2500 MHz
CAN4311772052452K
VSWR*: 2.8 (Max)
Operating Temp.: -40 ~ 105°C
Polarization: Linear
RoHS Compliance
7020 2.4GHz Chip Antenna
Size (mm) : 7.0*2.0*0.8
Peak Gain : 2.62 dBi dBi(Typ.)
ANT5320LL45R2400A /
Freq. Range: 2400~2500 MHz
CAN4311753452451K
VSWR*: 2.0 (Max)
Operating Temp.: -40 ~ 105°C
Polarization: Linear
RoHS Compliance
5320 2.4GHz Chip Antenna
Size (mm) : 5.3*2.0*1.2
Peak Gain : 5.5 dBi dBi(Typ.)
ANT5320LL24R2400A /
Freq. Range: 2400~2500 MHz
CAN4311753242452K
VSWR*: 2.0 (Max)
Operating Temp.: -40 ~ 105°C
Polarization: Linear
RoHS Compliance
5320 2.4GHz PIFA Chip Antenna
Size (mm) : 5.3*2.0*1.25
Peak Gain : 2.78 dBi(Typ.)
ANT5010LL04R2400A /
Freq. Range: 2400~2500 MHz
CAN4311751042453K
VSWR*: 2.8 (Max)
Operating Temp.: -40 ~ 105°C
Polarization: Linear
RoHS Compliance
5010 2.4GHz Chip Antenna
Size (mm) : 5.0*1.0*1.0
Peak Gain : 2.28 dBi(Typ.)
ANT3216LL00R2400A /
Freq. Range: 2400~2500 MHz
CAN4311712002453K
VSWR*: 2.5 (Max)
Operating Temp.: -40 ~ 105°C
Polarization: Linear
RoHS Compliance
3216 2.4Ghz Chip Antenna
Size (mm) : 3.2*1.6*1.3
Peak Gain : 5 dBi(Typ.)
ANT3216A063R2400A /
Freq. Range: 2400~2500 MHz
CAN4311212632453K
VSWR*: 2.0 (Max)
Operating Temp.: -40 ~ 105°C
Polarization: Linear
RoHS Compliance
3216 2.4GHz PIFA Chip Antenna
Size (mm) : 3.2*1.6*0.5
Peak Gain : 1.69 dBi(Typ.)
ANT3012LL04R2400A /
Freq. Range: 2400~2500 MHz
CAN4311792042453K
VSWR*: 2.0 (Max)
Operating Temp.: -40 ~ 105°C
Polarization: Linear
RoHS Compliance
3012 2.4GHz Chip Antenna
* VSWR depends on the environment
154
Peak Gain : 6.66 dBi(Typ.)
Peak Gain : 1.84 dBi(Typ.)
Size (mm) : 3.0*1.2*1.2
Wireless Components Selection Charts
Antenna - 2.4/ 5 GHz
2.4 GHz
Model
Part No./ Description
Electrical Data
Mechanical Data
ANT2012LL13R2400A /
CAN4311714132454K
Freq. Range : 2400~2500 MHz
VSWR*: 2.0 (Max)
Polarization: Linear
Peak Gain : 2.72 dBi(Typ.)
Freq. Range : 2400 MHz
VSWR*: 2.5 (Max)
Polarization: Linear
Peak Gain : 4.8 dBi(Typ.)
Size (mm) : 2.0*1.2*1.0
Operating Temp.: -40 ~ 105°C
2012 2.4GHz PIFA Chip Antenna
ANTX200P001B24003
2.4GHz PCB Antenna - mini
RoHS Compliance
Size (mm) : 18.4*7.5*0.55
Operating Temp.: -40 ~ 80°C
RoHS Compliance
2.4 GHz / GPS
Model
Part No./ Description
Electrical Data
Mechanical Data
ANT1003LL15R1524A /
CAN4311756151521K
Freq. Range : 1575 / 2400 MHz
VSWR*: 2.8 (Max)
Polarization: Linear
Peak Gain : 1.15 dBi / 2.90 dBi(Typ.)
Freq. Range : 1575 / 2400 MHz
Size (mm) : 10*3*1.5
Operating Temp.: -40 ~ 105°C
1003 2.4GHz+GPS PIFA Chip
Antenna
ANT5320LL07R1524A /
CAN4311753071522K
5320 2.4GHz+GPS PIFA Chip
Antenna
RoHS Compliance
Size (mm) : 5.3*2.0*1.2
Operating Temp.: -40 ~ 105°C
VSWR*: 2.0 (Max)
Polarization: Linear
RoHS Compliance
Peak Gain : 2.47 dBi / 2.04 dBi(Typ.)
2.4 / 5 GHz
Model
Part No./ Description
Electrical Data
Mechanical Data
ANT1003LL05R2455A /
CAN4311756052521K
1003 2.4+5GHz Chip Antenna
Freq. Range :
2400~2500/ 5150~5875 MHz
Size (mm) : 10*3*1.6
Operating Temp.: -40 ~ 105°C
RoHS Compliance
ANT5320LL04R2455A /
CAN4311753042522K
5320 2.4+5GHz Chip Antenna
ANT5320LL24R2455A /
CAN4311753242522K
5320 2.4+5GHz PIFA Chip
VSWR*: 2.8 (Max)
Polarization: Linear
Peak Gain : 2.5 dBi / 2.48dBi(Typ.)
Freq. Range :
2400~2500/ 5150~5875 MHz
VSWR*: 2.8 (Max)
Polarization: Linear
Peak Gain : 2.72 dBi / 3.85dBi(Typ.)
Freq. Range : 2400~2500/
5150~5875 MHz
Antenna
VSWR*: 2.8 (Max)
Polarization: Linear
Peak Gain : 2.17 dBi / 3.51dBi(Typ.)
ANTX100P001B24553
2.4+5GHz PCB Antenna
Freq. Range :
2400~2500/ 5150~5875 MHz
VSWR*: 2.5 (Max)
Polarization: Linear
Peak Gain : 5.1dBi(Typ.)
Size (mm) : 5.3*2.0*1.4
Operating Temp.: -40 ~ 105°C
RoHS Compliance
Size (mm) : 5.3*2.0*1.2
Operating Temp.: -40 ~ 105°C
RoHS Compliance
Size (mm) : 50*10*0.9
Operating Temp.: -40 ~ 80°C
RoHS Compliance
5 GHz
Model
Part No./ Description
Electrical Data
Mechanical Data
ANT3216LL05R5000A /
Freq. Range : 5150~5875 MHz
Size (mm) : 3.2*1.6*1.3
CAN4311712055003K
VSWR*: 2.0 (Max)
Polarization: Linear
Peak Gain : 5.71 dBi(Typ.)
Operating Temp.: -40 ~ 105°C
3216 5GHz Chip Antenna
RoHS Compliance
* VSWR depends on the environment
155
Wireless Components Product Selection Charts
Antenna - Cellular WWAN / Short Range
Cellular WWAN
Model
Part No./ Description
Electrical Data
Mechanical Data
ANT2112A010B0918A /
Freq. Range :
824~960 / 1710~1990 MHz
Size (mm) : 21*12*0.5
Operating Temp.: -40 ~ 105°C
RoHS Compliance
CAN4313284109181B
VSWR*: 2.0 (Max)
2112 Cellular-Band Chip Antenna Polarization: Linear
Peak Gain : 0.5 ~ 1 dBi(Typ.)
ANT3505B000TWPENA /
Freq. Range :
824~960 /1710~2170 MHz
CAN4313449009181B
VSWR*: 2.8 / 3.5 (Max)
Polarization: Linear
3505 Penta-band Antenna
Peak Gain : 2.9 dBi(Typ.)
ANT1204LL00R0918A /
Freq. Range : 900/1800 MHz
VSWR*: 3.0 (Max)
CAN4311759009181K
Polarization: Linear
1204 Cellular-Band Chip Antenna Peak Gain : N/A
ANTX100P001BWPEN3
Freq. Range :
824~960 / 1710~2170 MHz
Penta-band PCB Antenna
VSWR*: 2.5 Max ( Low Band )
3.5 Max ( High Band )
Polarization: Linear
Peak Gain : 4.2 dBi(Typ.)
Size (mm) : 35*5*6
Operating Temp.: -40 ~ 105°C
RoHS Compliance
Size (mm) : 12*4*1.2
Operating Temp.: -40 ~ 105°C
RoHS Compliance
Size (mm) : 50*20*0.55
Operating Temp.: -40 ~ 80°C
Cable*: Φ1.13 / 100mm
Connector: I-PEX
Mounting: Adhesive Tape
RoHS Compliance
Short-Range
Model
Part No./ Description
Electrical Data
Mechanical Data
ANT1204LL05R0915A /
Size (mm) : 12*4*1.6
Operating Temp.: -40 ~ 105°C
1204 915MHz Chip Antenna
Freq. Range : 915 MHz
VSWR*: 2.0 (Max)
Polarization: Linear
Peak Gain : 3.32 dBi(Typ.)
ANT1204LL08R0870A /
Freq. Range : 870 MHz
Size (mm) : 12*4*1.6
Operating Temp.: -40 ~ 105°C
CAN4311759050911K
VSWR*: 2.0 (Max)
CAN4311759080871K
Polarization: Linear
1204 870MHz Chip Antenna
Peak Gain : 0.5 dBi(Typ.)
ANT1204LL17R0870A /
Freq. Range : 870 MHz
VSWR*: 2.8 (Max)
CAN4311759170871K
Polarization: Linear
1204 870MHz PIFA Chip Antenna Peak Gain : 1.05 dBi(Typ.)
ANT7020LL05R0870A /
RoHS Compliance
Size (mm) : 12*4*1.0
Operating Temp.: -40 ~ 105°C
RoHS Compliance
Freq. Range : 870 MHz
VSWR*: 2.0 (Max)
Polarization: Linear
Peak Gain : N/A
Size (mm) : 7.0*2.0*0.7
Operating Temp.: -40 ~ 105°C
Size (mm) : 12*4*1.6
Operating Temp.: -40 ~ 105°C
1204 433MHz Chip Antenna
Freq. Range : 315/ 433 MHz
VSWR*: 2.0 (Max)
Polarization: Linear
Peak Gain : 0.79 dBi(Typ.)
ANT1204LL20R0433A /
Freq. Range : 315/ 433 MHz
Size (mm) : 12*4*1.2
CAN4311759200431K
VSWR*: 3.0 (Max)
Polarization: Linear
Peak Gain : 0.83 dBi(Typ.)
Freq. Range : 169 MHz
VSWR*: 2.0 (Max)
Operating Temp.: -40 ~ 105°C
CAN4311772050872K
7020 870MHz Chip Antenna
ANT1204F002R0433A /
CAN4311059020431K
1204 433MHz Chip Antenna
ANT2405F001R0169A /
CAN4311050010162K
2405 169MHz Chip Antenna
* VSWR depends on the environment
* Cable/Connector is customizable
156
RoHS Compliance
Polarization: Linear
Peak Gain : N/A
RoHS Compliance
RoHS Compliance
RoHS Compliance
Size (mm): 24*5*1.6
Operating Temp.: -40 ~ 105°C
RoHS Compliance
Wireless Components Selection Charts
Antenna - GPS
GPS
Model
Part No./ Description
Electrical Data
Mechanical Data
ANT8010LL05R1575A /
CAN4311781051583K
Freq. Range : 1575 MHz
VSWR*: 2.0 (Max)
Polarization: Linear
Peak Gain: 0.67 dBi(Typ.)
Freq. Range : 1575 MHz
VSWR*: 2.0 (Max)
Polarization: Linear
Peak Gain: 2.52 dBi(Typ.)
Freq. Range : 1575 MHz
VSWR*: 2.0 (Max)
Polarization: Linear
Peak Gain: 3.16 dBi(Typ.)
Freq. Range : 1575 MHz
VSWR*: 2.0 (Max)
Polarization: Linear
Peak Gain: 7.32 dBi(Typ.)
Freq. Range : 1575 MHz
VSWR*: 2.0 (Max)
Polarization: RHCP
Peak Gain: -3 dBic(Typ.)
Freq. Range : 1575 MHz
VSWR*: 2.0 (Max)
Polarization: RHCP
Peak Gain: -1 dBic(Typ.)
Freq. Range : 1575 MHz
VSWR*: 2.0 (Max)
Polarization: RHCP
Peak Gain: -1 dBic(Typ.)
Freq. Range : 1575 MHz
VSWR*: 2.0 (Max)
Polarization: RHCP
Peak Gain: 1.5 dBic(Typ.)
Freq. Range : 1575 MHz
VSWR*: 2.0 (Max)
Polarization: RHCP
Peak Gain: 1.5 dBic(Typ.)
Freq. Range : 1575 MHz
VSWR*: 2.0 (Max)
Polarization: RHCP
Peak Gain: 1.5 dBic(Typ.)
Freq. Range : 1575 MHz
VSWR*: 2.0 (Max)
Polarization: RHCP
Peak Gain: 2 dBic(Typ.)
Freq. Range : 1575 MHz
VSWR*: 2.0 (Max)
Polarization: RHCP
Peak Gain: 4 dBic(Typ.)
Size (mm): 8.0*1.0*1.0
Operating Temp.: -40 ~ 105°C
8010 GPS Chip Antenna
ANT6230LL01R1575A /
CAN4311763011582K
6230 GPS Chip Antenna
ANT5320LL14R1575A /
CAN4311753141582K
5320 GPS PIFA Chip Antenna
ANT3216LL15R1575A /
CAN4311712151583K
3216 GPS PIFA Chip Antenna
ANT1010B00FT1575A /
CAN43134200F1581B
10104 GPS Patch Antenna
ANT1212B00BT1575A /
CAN43134220B1581B
12124 GPS Patch Antenna
ANT1212B00DT1575A /
CAN43134220D1581B
12124 GPS Patch Antenna
ANT1515B00BT1575A /
CAN43134230B1581B
15154 GPS Patch Antenna
ANT1515B00DT1575A /
CAN43134230D1581B
15154 GPS Patch Antenna
ANT1515B00FT1575A /
CAN43134230F1581B
15154 GPS Patch Antenna
ANT1818B00AT1575A /
CAN43134240A1581B
18182 GPS Patch Antenna
ANT1818B00BT1575A /
CAN43134240B1581B
18184 GPS Patch Antenna
RoHS Compliance
Size (mm): 6.2*3.0*1.25
Operating Temp.: -40 ~ 105°C
RoHS Compliance
Size (mm): 5.3*2.0*1.2
Operating Temp.: -40 ~ 105°C
RoHS Compliance
Size (mm): 3.2*1.6*1.2
Operating Temp.: -40 ~ 105°C
RoHS Compliance
Size (mm): 10*10*4
Operating Temp.: -40 ~ 105°C
Mounting: PIN
RoHS Compliance
Size (mm): 12*12*4
Operating Temp.: -40 ~ 105°C
Mounting : SMD
RoHS Compliance
Size (mm): 12*12*4
Operating Temp.: -40 ~ 105°C
Mounting: PIN
RoHS Compliance
Size (mm): 15*15*4
Operating Temp.: -40 ~ 105°C
Mounting: SMD
RoHS Compliance
Size (mm): 15*15*4
Operating Temp.: -40 ~ 105°C
Mounting: PIN
RoHS Compliance
Size (mm): 15*15*4
Operating Temp.: -40 ~ 105°C
Mounting: PIN
RoHS Compliance
Size (mm): 18*18*2
Operating Temp.: -40 ~ 105°C
Mounting: SMD
RoHS Compliance
Size (mm): 18*18*4
Operating Temp.: -40 ~ 105°C
Mounting: SMD
RoHS Compliance
* VSWR depends on the environment
157
Wireless Components Selection Charts
Antenna - GPS
GPS
Model
Part No./ Description
Electrical Data
Mechanical Data
ANT1818B00CT1575A /
CAN43134240C1581B
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
Polarization: RHCP
Peak Gain: 2 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
Polarization: RHCP
Peak Gain: 4 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
Polarization: RHCP
Peak Gain: 2 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
Polarization: RHCP
Peak Gain: 5 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
Polarization: RHCP
Peak Gain: 5.5 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
Polarization: RHCP
Peak Gain: 5 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
Polarization: RHCP
Peak Gain: 5.5 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
Polarization: RHCP
Peak Gain: 5 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
Polarization: RHCP
Peak Gain: 5.5 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
Polarization: Linear
Peak Gain: -0.5 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
Polarization: Linear
Peak Gain: 1.61 dBic(Typ.)
Size (mm): 18*18*2
Operating Temp. : -40 ~ 105°C
18182 GPS Patch Antenna
ANT1818B00DT1575A /
CAN43134240D1581B
18184 GPS Patch Antenna
ANT1818B00ET1575A /
CAN43134240E1581B
18182 GPS Patch Antenna
ANT2525B00AT1575A /
CAN43134250A1581B
25252 GPS Patch Antenna
ANT2525B00BT1575A /
CAN43134250B1581B
25254 GPS Patch Antenna
ANT2525B00CT1575A /
CAN43134250C1581B
25252 GPS Patch Antenna
ANT2525B00DT1575A /
CAN43134250D1581B
25254 GPS Patch Antenna
ANT2525B00ET1575A /
CAN43134250E1581B
25252 GPS Patch Antenna
ANT2525B00FT1575A /
CAN43134250F1581B
25254 GPS Patch Antenna
ANT1606B00DT1575A /
CAN43134460D1581B
16064 GPS Patch Antenna
ANT1004B000R1575A /
CAN4311441001581K
10044 GPS Patch Antenna
* VSWR depends on the environment
158
Mounting: PIN
RoHS Compliance
Size (mm): 18*18*4
Operating Temp. : -40 ~ 105°C
Mounting: PIN
RoHS Compliance
Size (mm): 18*18*2
Operating Temp. : -40 ~ 105°C
Mounting: PIN
RoHS Compliance
Size (mm): 25*25*2
Operating Temp. : -40 ~ 105°C
Mounting: SMD
RoHS Compliance
Size (mm): 25*25*4
Operating Temp. : -40 ~ 105°C
Mounting: SMD
RoHS Compliance
Size (mm): 25*25*2
Operating Temp. : -40 ~ 105°C
Mounting: PIN
RoHS Compliance
Size (mm): 25*25*4
Operating Temp. : -40 ~ 105°C
Mounting: PIN
RoHS Compliance
Size (mm): 25*25*2
Operating Temp. : -40 ~ 105°C
Mounting: PIN
RoHS Compliance
Size (mm): 25*25*4
Operating Temp. : -40 ~ 105°C
Mounting: PIN
RoHS Compliance
Size (mm): 16*6*4
Operating Temp. : -40 ~ 105°C
Mounting: PIN
RoHS Compliance
Size (mm): 10*4*4
Operating Temp. : -40 ~ 105°C
Mounting: SMD
RoHS Compliance
Wireless Components Selection Charts
Antenna - GPS / Glonass / Active Antenna
GPS+Glonass
Model
Part No./ Description
Electrical Data
Mechanical Data
ANT1818B00BT1516A /
CAN43134240B1561B
Freq. Range: 1575 / 1602 MHz
VSWR*: 2.0 (Max)
Polarization: Linear
Peak Gain: 1.89 / 2.59 dBi(Typ.)
Freq. Range: 1575 / 1602 MHz
VSWR*: 2.0 (Max)
Polarization: Linear
Peak Gain: 2.65 / 2.79 dBi (Typ.)
Size (mm): 18*18*4
Operating Temp. : -40 ~ 105°C
18184 Gps+Glonass Patch Antenna
ANT1818B00DT1516A /
CAN43134240D1561B
18184 Gps+Glonass Patch Antenna
ANT2525B00BT1516A /
CAN43134250B1561B
25254 Gps+Glonass Patch Antenna
ANT2525B00DT1516A /
CAN43134250D1561B
25254 Gps+Glonass Patch Antenna
Freq. Range: 1575 / 1602 MHz
VSWR*: 2.0 (Max)
Polarization: Linear
Peak Gain: 3.44 / 4.10 dBi (Typ.)
Freq. Range: 1575 / 1602 MHz
VSWR*: 2.0 (Max)
Polarization: Linear
Peak Gain: 3.5 / 3.8 dBi (Typ.)
Mounting: SMD
RoHS Compliance
Size (mm): 18*18*4
Operating Temp. : -40 ~ 105°C
Mounting: PIN
RoHS Compliance
Size (mm): 25*25*4
Operating Temp. : -40 ~ 105°C
Mounting: SMD
RoHS Compliance
Size (mm): 25*25*4
Operating Temp. : -40 ~ 105°C
Mounting: PIN
RoHS Compliance
Active GPS
Model
Part No./ Description
Electrical Data
Mechanical Data
ANT2525JB08B1575A /
CAN4313325081581B
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
Polarization: RHCP
LNA Gain: 16 dB (Typ.)
Antenna Gain: 5.5 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
Polarization: RHCP
LNA Gain: 25 dB (Typ.)
Antenna Gain: 1.54 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
Polarization: RHCP
LNA Gain: 20.5 dB (Typ.)
Antenna Gain: 1.0 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 1.5 (Max)
Polarization: RHCP
LNA Gain: 25 dB (Typ.)
Antenna Gain: -0.16 dBic(Typ.)
Freq. Range: 1575 MHz
VSWR*: 2.0 (Max)
Polarization: Linear
LNA Gain: 20 dB (Typ.)
Antenna Gain: 0.35 dBi (Typ.)
Size (mm): 25*25*6.9
Cable* (mm): 1.13*75
Operating Temp. : -30 ~ 85°C
RoHS Compliance
25256.9 GPS Active Antenna
ANT1818JB30B1575A /
CAN4313324301581B
18187.1 GPS Active Antenna
ANT1515JB27B1575A /
CAN4313323271581B
15156.5 GPS Active Antenna
ANT1212JB27B1575A /
CAN4313322271581B
12126.5 GPS Active Antenna
ANT1606JB12B1575A /
CAN4313346121581B
20066.4 GPS Active Antenna
Size (mm): 18*18*7.1
Cable* (mm): 1.37*100
Operating Temp. : -30 ~ 85°C
RoHS Compliance
Size (mm): 15*15*6.5
Cable* (mm): 1.13*100
Operating Temp. : -30 ~ 85°C
RoHS Compliance
Size (mm): 12*12*6.5
Cable* (mm): 1.13*60
Operating Temp. : -30 ~ 85°C
RoHS Compliance
Size (mm): 20*6*6.4
Cable* (mm): 1.37*93
Operating Temp. : -30 ~ 85°C
RoHS Compliance
Active GPS+Glonass
Model
Part No./ Description
ANT8010JLC1B1516A /
CAN4313981C11561B
Electrical Data
Freq. Range: 1575/1602 MHz
VSWR*: 2.0 (Max)
22061.9 GPS+Glonass Active Antenna Polarization: Linear
LNA Gain: 20 / 20 dB (Typ.)
Antenna Gain: 5.88 dBi(Typ.)
Mechanical Data
Size (mm): 22*6*1.9
Cable* (mm): 1.13*100
Operating Temp. : -30 ~ 85°C
RoHS Compliance
* VSWR depends on the environment
* Cable/Connector is customizable
159
Wireless Components Selection Charts
Antenna - Others
FM
Model
Part No./ Description
Electrical Data
Mechanical Data
ANT2405F001R0098A /
CAN4311050010882K
Freq. Range : 88 MHz
VSWR*: 2.0 (Max)
Polarization: Linear
Peak Gain : N/A
Freq. Range : 88 MHz
VSWR*: 2.0 (Max)
Polarization: Linear
Peak Gain : N/A
Size (mm): 24*5*1.6
Operating Temp.: -40 ~ 105°C
2405 FM Chip Antenna
ANT1105LF00R0098A /
CAN4311858000882K
1105 FM (Ferrite) Chip Antenna
RoHS Compliance
Size (mm): 11*5*1.3
Operating Temp.: -40 ~ 105°C
RoHS Compliance
SDARS
Model
Part No./ Description
Electrical Data
Mechanical Data
ANT2525B00DT2300A /
CAN43134250D2301B
Freq. Range : 2320~2345 MHz
VSWR*: 2.0 (Max)
Polarization: LHCP
Peak Gain : 6 dBic(Typ.)
Size (mm):25*25*4
Operating Temp.: -40 ~ 105°C
25254 SDARS Patch Antenna
Mounting: PIN
RoHS Compliance
1.88~2.1 GHz
Model
Part No./ Description
Electrical Data
Mechanical Data
ANT8868LL00R1880A /
CAN4311788001881K
Freq. Range : 1880~2000 MHz
VSWR*: 2.0 (Max)
Polarization: Linear
Peak Gain: 6.13 dBi(Typ.)
Size (mm): 8.8*6.8*0.9
Operating Temp.: -40 ~ 105°C
8868 DECT Chip Antenna
* VSWR depends on the environment
160
RoHS Compliance
Wireless Components Selection Charts
Filters
Filter (BPF)
Model
Part No./ Description
Electrical Data
BPF2012LL05R2400A /
CFL4111714052454K
Freq. Range: 2400-2500MHz
Insertion Loss: 2.0dB (Max)
VSWR*: 2.0 (Max)
2012 2.4G BPF Type05,
H.R.3.2G
BPF2012LL22R2400A /
CFL4111714222454K
2012 2.4G BPF Type22,
H.R.2.1G
BPF2012LM17R2400A /
CFL4111514172454K
2012 2.4G BPF Type17,
H.R.2.1G
BPF2012LM47R2400A /
CFL4111514472454K
2012 2.4G BPF Type47,
H.R.2.1G
BPF2012LM09R2400A /
CFL4111514092454K
2012 2.4G BPF Type09
BPF2012LL01R5000A /
CFL4111714015004K
2012 5G BPF Type01
BPF2012LL05R5000A /
CFL4111714055004K
2012 5G BPF Type05
BPF1608LM02R2400A /
CFL4111515022454K
1608 2.4G BPF Type02
BPF1608LM07R2400A /
CFL4111515072454K
1608 2.4G BPF Type07
Mechanical Data
Attenuation:
24dB Min @ 3200MHz
30dB Min @ 4800~5000MHz
Size(mm): 2.0*1.2*0.9
Operating Temp.: -40~85°C
RoHS Compliance
20dB Min @ 7200~7500MHz
Freq. Range: 2400-2500 MHz
Insertion Loss: 2.5 dB (Max.)
VSWR*: 2.0 (Max)
Attenuation:
30dB Min @ 824~915 MHz
32dB Min @ 1920~1980 MHz
Size(mm): 2.0*1.2*0.5
Operating Temp.: -40~85°C
RoHS Compliance
Freq. Range: 2400-2500 MHz
Insertion Loss: 2.6dB (Max.)
VSWR*: 2.0 (Max)
16dB Min @ 2110~2170 MHz
35dB Min @ 4800~5000 MHz
23dB Min @ 7200~7500 MHz
Attenuation:
40dB Min @ 880~960 MHz
40dB Min @ 1710~1990 MHz
Size(mm): 2.0*1.2*0.9
Operating Temp.: -25~85°C
RoHS Compliance
Freq. Range: 2400-2500MHz
Insertion Loss: 1.8dB (Max)
VSWR*: 2.0 (Max)
20dB Min @ 2110~2170 MHz
30dB Min @ 4800~5000 MHz
30dB Min @ 7200~7500 MHz
Attenuation:
30dB Min @ 824~915 MHz
30dB Min @ 1545~1605 MHz
Size(mm): 2.0*1.2*0.8
Operating Temp.: -40~85°C
RoHS Compliance
Freq.Range: 2400-2500MHz
Insertion Loss: 1.2dB (Max)
VSWR*: 2.0 (Max)
35dB Min @1710~1990 MHz
30dB Min @2170 MHz
30dB Min @ 4800~5000 MHz
25dB Min @ 7200~7500 MHz
Attenuation:
15dB Min @1600MHz
25dB Min @3200MHz
Size(mm): 2.0*1.2*0.9
Operating Temp.: -40~85°C
RoHS Compliance
Freq. Range: 4900-5950 MHz
Insertion Loss: 1.5dB (Max)
VSWR*:2.0 (Max)
20dB Min @4800~5000MHz
Attenuation:
30dB [email protected]~3000MHz
25dBMin@ 3300~4000MHz
Size(mm): 2.0*1.2*1
Operating Temp.:
RoHS Compliance
Freq. Range: 5150-5850 MHz
Insertion Loss: 1.8dB (Max)
VSWR*: 2.0 (Max)
25dBMin@ 9800~11900MHz
Attenuation:
30dB Min @ 2400~2500MHz
20dB Min @ 4700MHz
Size(mm): 2.0*1.2*0.8
Operating Temp.: -40~85°C
RoHS Compliance
Freq. Range: 2400-2500 MHz
Insertion Loss: 1.7 dB (Max)
VSWR*: 2.0 (Max)
Attenuation:
30dB Min @ 880~960 MHz
20dB Min @ 1710~1990 MHz
Size(mm): 1.6*0.8*0.6
Operating Temp.: -40~85°C
RoHS Compliance
Freq. Range: 2400-2500 MHz
Insertion Loss: 3.2 dB (Max.)
VSWR*: 2.0 (Max)
8.5dB Min@ 2170 MHz
20dB Min @ 4800~5000 MHz
25dB Min @ 7200~7500 MHz
Attenuation:
40dB Min @ 880~915 MHz
38dB Min @ 1710~1850 MHz
Size(mm): 1.6*0.8*0.6
Operating Temp.: -40~85°C
RoHS Compliance
40dB Min @ 1850~1910 MHz
40dB Min @ 1920~1990 MHz
35dB Min @ 2110~2170 MHz
30dB Min @ 4800~5000 MHz
30dB Min @ 7200~7500 MHz
* VSWR depends on the environment
161
Wireless Components Selection Charts
Filter
Filter (BPF)
Model
Part No./ Description
Electrical Data
BPF1608LM17R2400A /
CFL4111515172454K
Freq. Range: 2400-2500 MHz
Insertion Loss: 2.7 dB (Max.)
VSWR*: 2.0 (Max)
Attenuation:
38dB Min @ 880~915 MHz
35dB Min @ 1710~1850 MHz
Size(mm): 1.6*0.8*0.6
Operating Temp.: -40~85°C
RoHS Compliance
Freq. Range: 2400-2500 MHz
Insertion Loss: 1.8 dB (Max.)
VSWR*: 2.0 (Max)
35dB Min @ 1850~1910 MHz
35dB Min @ 1920~1990 MHz
25dB Min @ 2110~2170 MHz
30dB Min @ 4800~5000 MHz
30dB Min @ 7200~7500 MHz
Attenuation:
20dB Min @ 1710~1990 MHz
6.5dB Min @ 2110~2170 MHz
Size(mm): 1.6*0.8*0.6
Operating Temp.: -40~85°C
RoHS Compliance
Freq. Range: 2400-2500 MHz
Insertion Loss: 2.8 dB (Max.)
VSWR*: 2.0 (Max)
25dB Min @ 4800~5000 MHz
20dB Min @ 7200~7500 MHz
Attenuation:
38dB Min @ 880~915 MHz
35dB Min @ 1710~1850 MHz
Size(mm): 1.6*0.8*0.6
Operating Temp.: -40~85°C
RoHS Compliance
1608 2.4G BPF Type17
BPF1608LM11R2400A /
CFL4111515112454K
1608 2.4G BPF Type11
BPF1608LM37R2400A /
CFL4111515372454K
1608 2.4G BPF Type37
Mechanical Data
35dB Min @ 1850~1910 MHz
35dB Min @ 1920~1990 MHz
30dB Min @ 2110~2170 MHz
35dB Min @ 4800~5000 MHz
25dB Min @ 7200~7500 MHz
Filter (LPF)
Model
Part No./ Description
Electrical Data
LPF1608LL53R2400A /
CFL4111715532454K
Freq. Range: 2400-2500 MHz
Insertion Loss: 0.48dB (Max)
VSWR*: 1.5 (Max)
1608 2.4G LPF Type53
Mechanical Data
Attenuation:
35dB Min @ 4800~5000 MHz
27dB Min @ 7200~7500 MHz
Size(mm): 1.6*0.8*0.65
Operating Temp.: -40~85°C
RoHS Compliance
Filter (Diplexer)
Model
Part No./ Description
Electrical Data
DPX2012LL85R2455A /
CFL4111714852524K
Freq. Range: 2400-2500MHz/
4900-5900MHz
2012 2.4/5GHz Diplexer
Type85
Insertion Loss:
Low : 0.7dB/
High: 0.9dB
DPX2012LL89R2455A /
CFL4111714892524K
2012 2.4/5GHz Diplexer
Type89
VSWR*: 2.0 (Max)
Freq. Range: 2400-2500MHz/
4900-5950MHz
Insertion Loss:
Low : 0.5dB/
High: 0.65dB
VSWR*: 2.0 (Max)
* VSWR depends on the environment
162
Mechanical Data
Attenuation:
20dB Min @ 4900~5900 MHz
20dB Min @ 2400~2500 MHz
Size(mm): 2.0*1.2*0.85
Operating Temp.: -40~85°C
RoHS Compliance
Attenuation:
Size(mm): 2.0*1.2*0.5
20dB Min.,[email protected]~5000 MHz Operating Temp.: -40~85°C
20dB Min.,[email protected]~7500 MHz RoHS Compliance
20dB Min. @ 824~915 MHz
20dB Min. @1800~2500 MHz
10dB Ref.,[email protected]~11900
MHz
Wireless Components Selection Charts
Filters
Balun
Model
Part No./ Description
Electrical Data
BLN1608LL01R5000A/
CBA4711715015004K
Freq. Range: 4900-5950MHz
1608 5G Balun Type01, 50100
BLN1608LL00R2400A/
CBA4711715002454K
1608 2.4G Balun Type00, 5050
BLN1608LL01R2400A/
CBA4711715012454K
Insertion Loss: 1.2 dB (Max)
VSWR*: 2.0 (Max)
Freq. Range: 2400-2500MHz
Insertion Loss: 1.2 dB (Max)
VSWR*: 2.0 (Max)
Freq. Range: 2400-2500MHz
Insertion Loss: 1.1 dB (Max)
*
1608 2.4G Balun Type01, 50100 VSWR : 2.0 (Max)
Mechanical Data
Unbalanced Impedance:
50Ω
Balanced Impedance: 100Ω
Phase Difference:
180 ±10 degree
Amplitude Difference:
1.5 dB (Max)
Unbalanced Impedance:
50Ω
Balanced Impedance: 50Ω
Phase Difference:
180 ±10 degree
Amplitude Difference:
1 dB (Max)
Unbalanced Impedance:
50Ω
Balanced Impedance: 100Ω
Phase Difference:
180 ±10 degree
Amplitude Difference:
2 dB (Max)
Size(mm): 1.6*0.8*0.65
Operating Temp.: -40~85°C
RoHS Compliance
Size(mm): 1.6*0.8*0.65
Operating Temp.: -40~85°C
RoHS Compliance
Size(mm): 1.6*0.8*0.65
Operating Temp.: -40~85°C
RoHS Compliance
Balance Filter (Combo)
Model
Part No./ Description
Electrical Data
BLF2012LL98R2400A/
CBA4711714982454K
Freq. Range: 2400-2500MHz
Insertion Loss: 3.5dB (Max)
VSWR*: 2.0 (Max)
Unbalanced Impedance:
50Ω
Balanced Impedance:
Conjugate match to CSR
BC03/04 series
Phase Difference:
180 ±5 degree @25°C
Amplitude Balance:
1.0 dB (Max)
Freq. Range: 2400-2500MHz
Insertion Loss: 2.8 dB (Max)
VSWR*: 2.0 (Max)
Unbalanced Impedance:
50Ω
Balanced Impedance:
Conjugate match to CSR
BC04/05/06 series
Phase Difference:
180 ±10 degree @25°C
Amplitude Balance:
1.5 dB (Max)
Freq. Range: 2400-2500MHz
Insertion Loss: 3.1dB (Max)
VSWR*:
Unbalanced Impedance:
50Ω
Balanced Impedance:
Conjugate match to MTK
MT6616 series
Phase Difference:
180 ±10 degree @25°C
Amplitude Balance:
1.5 dB (Max)
2012 2.4G Combo Type98
BLF2012LM37R2400A/
CBA4711514372454K
2012 2.4G Combo Type37
BLF2012LM31R2400A/
CBA4711514312454K
2012 2.4G Combo Type31
Mechanical Data
Attenuation:
40dB [email protected]~960MHz
25dB [email protected]~1600MHz
Size(mm): 2.0*1.2*0.9
Operating Temp.: -40~85°C
RoHS Compliance
35dB [email protected]~5000MHz
30dB [email protected]~7500MHz
Attenuation:
35dB [email protected]~960MHz
30dB [email protected]~1880MHz
Size(mm): 2.0*1.2*0.8
Operating Temp.: -40~85°C
RoHS Compliance
20dB [email protected]~1990MHz
30dB [email protected]~5000MHz
Attenuation:
35dB [email protected]~960MHz
30dB [email protected]~1880MHz
Size(mm): 2.0*1.2*0.8
Operating Temp.: -40~85°C
RoHS Compliance
20dB [email protected]~1990MHz
30dB [email protected]~5000MHz
* VSWR depends on the environment
163
Wireless Components Selection Charts
Product information - Ordering Information
Explanation of ordering code - New
Ordering example : ANT3216A063R2400A
ANT
3216
Product Type (code 1)
ANT: Antenna
BPF: Band-Pass Filter
LPF: Low-Pass Filter
BLN: Balun
BLF: Balun Filter
DPX: Diplexer
(1) Size (mm) - SMD (LTCC) (code 2)
3216: 3.2 x 1.6 mm
2012: 2.0 x 1.2 mm
2520: 2.5 x 2.0 mm
A
063
R
2400
A
Factory Control Code /
Cable Type (code 7)
Frequency Band (MHz)(code 6)
2400: 2.4 – 2.5 GHz;
2455: 2.4&5 GHz
1575: GPS; 1516: GPS+Glonass
0433: 433 MHz
0870: 868 MHz
0918: 900/1800 MHz
WQUD: 850/900/1800/1900 MHz
WPEN: 850/900/1800/1900/2100 MHz
(2) Connector - Cable length (mm)
Stand-alone (code 2)
Ex: X100 – IPEX connector, 100 mm cable length
X: IPEX, M: MMCX, S: SMA, Z: Stripped
100: 100 mm cable length
Packing Style (code 5)
R: Tape & Reel
T: Tray
B: Bulk
Type (code 3)
L, F, A: Chip antenna / Filter / Balun
B: Bulk antenna
P: PCB
X: FPCB
S: Metal
E: External
J: Integrated antenna
164
Serial No. (code 4)
Wireless Components Selection Charts
Product Information - Ordering Information
Explanation of ordering code - Antenna (old)
Ordering example : CAN4311792042453K
CAN43
11 7 92
04
245 3K
Series name (code 1)
Packing Quantity (code 7)
CAN43 = Antenna products
3K = 3,000 pcs per reel
Packing Style (code 2)
Working Frequency (code 6)
11=Reel
245 = 2.4 ~ 2.5 GHz
Material (code 3)
Antenna Type (code 5)
Size (code 4)
Explanation of ordering code - Filter / Diplexer / Balun / Combo (old)
Ordering example : CFL4X11714002453K
CFL4X 11 7
14
00
245
3K
Product Family (code 1)
Packing Quantity (code 7)
CFL41= Filter & Diplexer
CBA47= Balun & Combo
3K = 3000 pcs/reel ; plastic
4K = 4000 pcs/reel ; plastic
Packing Style (code 2)
11=Tape
13=Bulk
Material (code 3)
Size (mm) (code 4)
Working Frequency (code 6)
245 = 2.4-2.5GHz (BT, WLAN)
500 = 5 GHz
350 = 3-3.5GHz (WiMAX)
252 = 2.45/5GHz Dual Band (WLAN)
237 = 2.3-2.7GHz (WiMAX)
Type (code 5)
11 = 3.2*2.5
12 = 3.2*1.6
13 = 2.5*2.0
14 = 2.0*1.2
15 = 1.6*0.8
16 = 1.0*0.5
165
Wireless components Engineering Design Kits
Sample Kits
M2M Application : Antenna
Ordering code ANTSB000000020140
Product Series
2.4GHz
PART NUMBER
Frequency Range (MHz)
ANT1204F001R2400A
2400 - 2500
ANT8010LL04R2400A
2400 - 2500
ANT5320LL24R2400A
2400 - 2500
ANT3216A063R2400A
2400 - 2500
ANT3216LL00R2400A
2400 - 2500
ANT2012LL13R2400A
2400 - 2500
ANTX200P001B24003
2400 - 2500
ANT5320LL04R2455A
ANT5320LL24R2455A
2.4/5 GHz
ANTX100P001B24553
ANTX200P002B24553
GPS
5150 - 5875
2400 - 2500
5150 - 5875
2400 - 2500
5150 - 5875
2400 - 2500
5150 - 5875
ANT6230LL01R1575A
1575
ANT5320LL14R1575A
1575
ANT3216LL15R1575A
1575
ANT1212B00DT1575A
1575
ANT1515B00FT1575A
1575
ANT1818B00AT1575A
1575
ANT2525B00BT1575A
1575
ANT2525B00FT1575A
1575
ANT1818B00BT1516A
1575 / 1602
ANT1818B00DT1516A
1575 / 1602
ANT2525B00BT1516A
1575 / 1602
ANT2525B00DT1516A
1575 / 1602
Active GPS
ANT1818JB30B1575A
1575
2.4GHz + GPS
ANT5320LL17R1524A
1575 / 2400
GPS& GLONASS
ANT2112A010B0918A
ANT1204LL00R0918A
Cellular WWAN
ANT3505B000TWPENA
ANTX100P001BWPEN3
Short-Range
166
2400 - 2500
824 - 960
1710 - 1990
900 / 1800
824 - 960
1710 - 2170
824 - 960
1710 - 2170
ANT2405F001R0169A
169
ANT1204F002R0433A
315 / 433
ANT1204LL08R0870A
870
ANT1204LL05R0915A
915
FM
ANT1105LF00R0098A
88
SDARS
ANT2525B00DT2300A
2320 - 2345
MULTILAYER CHIP VARISTORS
MLV Product Selection Charts
Multilayer Chip Varistors, 0402 to 1206
Features
• Excellent clamping voltage
• Excellent energy dissipation capability
• Quick response time (<1n sec)
• Adjustable capacitance values
• High reliability
• High transient current capability
• Symmetrical voltage-current characteristics
Construction
Case dimensions
Case size designation
T
Dimensions in mm
Inch-based
L1
W
T
L2 / L2 min
L2 / L3 max
L4 min
0402
1.0 ±0.10
0.5 ±0.10
0.5 ±0.10
0.15
0.30
0.40
0603
1.6 ±0.15
0.8 ±0.10
0.8 ±0.10
0.20
0.60
0.40
0805
2.0 ±0.20
1.25 ±0.10
0.25
0.75
0.55
0.25
0.75
1.40
W
L2
L4
L3
L1
0.85 ±0.10
1206
3.2 ±0.15
1.6 ±0.15
Thickness classification and packing quantities
8 mm tape width per reel
Type
Thickness classification
(mm)
0402
0.50 ±0.10
10 000
0603
0.80 ±0.10
4 000
0805
0.85 ±0.10
4 000
1206
0.85 ±0.10
4 000
180 mm / 7”
Paper
168
MLV Product Selection Charts
Specification for 0402
MLV
General purpose
0402
Maximum
working voltage
5.5 V
5.5 V
9V
14 V
14 V
18 V
18 V
18 V
30 V
Varistor voltage
tolerance
(code 8)
10 ~ 14 V
(S)
7.2 ~ 10.8V
(M)
10.2~13.8V
(L)
18~24 V
(S)
16.2~19.8V
(K)
24~34 V
(S)
50~80 V
(S)
21.6~26.4 V
(K)
50~80 V
(S)
1 pF
3 pF
0.5 ±0.10
0.5 ±0.10
5 pF
10 pF
15 pF
22 pF
27 pF
33 pF
0.5 ±0.10
40 pF
50 pF
0.5 ±0.10
0.5 ±0.10
82 pF
100 pF
120 pF
160 pF
0.5 ±0.10
0.5 ±0.10
0.5 ±0.10
200 pF
250 pF
300 pF
0.5 ±0.10
360 pF
470 pF
480 pF
650 pF
900 pF
Tape width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
169
MLV Product Selection Charts
Specification for 0603
MLV
General purpose
0603
Maximum
working voltage
5.5 V
5.5 V
9V
9V
14 V
14 V
18 V
30 V
Varistor voltage
tolerance
(code 8)
10 ~ 14 V (S)
7.2 ~ 10.8 V (M)
14~ 18 V (S)
9.6 ~ 14.4 V (M)
18 ~ 24 V (S)
16.2 ~ 19.8 V (K)
24 ~ 32 V (S)
50 ~ 80 V (S)
1 pF
3 pF
0.80 ±0.10
5 pF
9 pF
10 pF
15 pF
22 pF
33 pF
50 pF
82 pF
0.80 ±0.10
0.80 ±0.10
100 pF
120 pF
160 pF
0.80 ±0.10
0.80 ±0.10
180 pF
200 pF
250 pF
300 pF
350 pF
0.80 ±0.10
0.80 ±0.10
0.80 ±0.10
360 pF
470 pF
650 pF
680 pF
800 pF
900 pF
Tape width
Note: Values in shaded cells indicate thickness class (unit: mm)
170
8 mm
MLV Product Selection Charts
Specification for 0805
MLV
General purpose
0805
Maximum
working voltage
5.5 V
9V
14 V
16 V
18 V
26 V
30 V
Varistor voltage
tolerance
7.2 ~ 10.8 V (M) 10.8 ~ 14.6 V (L) 16.3 ~ 20.7 V (K) 20 ~ 27 V (S) 19.27 ~ 28.8 V (M) 29.7 ~ 36.3 V (K) 36.9 ~ 45.1 V (K)
(code 8)
100 pF
45 ~ 58 V (S)
0.85 ±0.10
160 pF
0.85 ±0.10
250 pF
400 pF
500 pF
38 V
0.85 ±0.10
0.85 ±0.10
0.85 ±0.10
0.85 ±0.10
0.85 ±0.10
0.85 ±0.10
600 pF
900 pF
1.1 nF
3.3 nF
Tape width
8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
171
MLV Product Selection Charts
Specification for 1206
MLV
General purpose
1206
Maximum
working voltage
5.5 V
14 V
18 V
26 V
30 V
38 V
working voltage
7.2 ~ 10.8 V (M)
16.3 ~ 20.7 V (K)
19.27 ~ 28.8 V (M)
29.7 ~ 36.3 V (K)
36.9 ~ 45.1 V (K)
45 ~ 58 V (S)
100 pF
160 pF
0.85 ±0.10
250 pF
400 pF
500 pF
0.85 ±0.10
0.85 ±0.10
0.85 ±0.10
600 pF
800 pF
900 pF
0.85 ±0.10
1.1 nF
3.3 nF
Tape width
Note: Values in shaded cells indicate thickness class (unit: mm)
172
8 mm
0.85 ±0.10
MLV Product Selection Charts
Ordering information for 0402 to 1206
Global part number
Ordering example: VRS0402KR55R680N
VR S
Series name (code 1-2)
VR = Varistor
Chip type (code 3)
S = Single chip
Size code (code 4-7)
0402
0603
0805
1206
Varistor voltage tolerance (code 8)
K = ±10 %
L =±15 %
M=±20 %
S = Special range
Packing style (code 9)
R = paper tape reel Ø7 inch
0402
K R 55R
680
N
Capacitance tolerance (code 16)
K = ± 10 %
L = ± 15 %
M = ± 20 %
N = ± 30 %
Capacitance value (code 13-15)
680 = 68 pF
(2 significant digits+number of zeros;
the 3rd digit signifies the multiplying
factor, and letter R is decimal point)
0=x1
1 = x 10 1
Maximum working voltage (code 10-12)
33R = 3.3 V
55R = 5.5 V
090 = 9 V
110 = 11 V
120 = 12 V
140 = 14 V
150 = 15 V
160 = 16 V
180 = 18 V
190 = 19 V
220 = 22 V
260 = 26 V
300 = 30 V
310 = 31 V
380 = 38 V
173
YAGEO - A GLOBAL COMPANY
ASIA
Dongguan, China
Hong Kong, China
Mudu, China
Tel. +86 769 8772 0275
Fax. +86 769 8791 0053
Tel. +852 2342 6833
Fax. +852 2342 6588
Tel. +86 512 6651 8889
Fax. +86 512 6651 9889
Qingdao, China
Suzhou, China
Tokyo, Japan
Tel. +86 532 8797 0533
Fax. +86 532 8797 0533
Tel. +86 512 6825 5568
Fax. +86 512 6825 5386
Tel. +81 3 6809 3972
Fax. +81 3 6809 3982
Seongnam, Korea
Kuala Lumpur, Malaysia
Singapore
Tel. +82 31 712 4797
Fax. +82 31 712 5866
Tel. +60 3 8063 8864
Fax. +60 3 8063 7376
Tel. +65 6244 7800
Fax. +65 6244 4943
Taipei, Taiwan
Tel. +886 2 6629 9999
Fax. +886 2 6628 8886
EUROPE
Roermond, Benelux
Munich, Germany
Szombathely, Hungary
Tel. +31 475 385 555
Fax. +31 475 385 589
Tel. +49 8990 7784 380
Fax. +49 8990 7784 379
Tel. +36 94 517 702
Fax. +36 94 517 701
Milan, Italy
Moscow, Russian Federation
Tel. +39 02 6129 1017
Fax. +39 02 6601 7490
Tel. +7 965 408 18 11
Fax. +7 498 610 07 07
NORTH AMERICA
San Jose, U.S.A.
Tel. +1 408 240 6200
Fax. +1 408 240 6201
For a complete listing of all Yageo sales offices, distributors, and representatives, please visit "contact us" at
www.yageo.com
© YAGEO Corporation
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights.
Printed in Taiwan
Document order number : YL 100 00144
Date of release: January 2014