TAI-SAW TECHNOLOGY CO., LTD. 4.0x2.5 16.0MHz Crystal Unit MODEL NO.: TZ0111A REV. NO.: 5.0 Revise: Rev. Rev. Page Rev. Account Date 1 5.0 N/A P5 Initial release Change Reel Dimension 05/30/05’ N/A 04/13/10’ 4.0 TAI-SAW TECHNOLOGY CO., LTD. Ref. No. Reviser Kelly Huang Quinton Lo TST DCC Release document 2 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SMD 4.0x2.5 16MHz Crystal Unit MODEL NO.: TZ0111A REV. NO.: 5.0 Features: Surface Mount Seam Weld Package Excellent Aging Good Frequency Perturbation and Stability over Temperature RoHS Compliant Lead free Lead-free soldering Description and Applications: Surface mount 4.0mmx2.5mm crystal unit . Electrical Specifications: TZ0111A Specification Nominal Frequency 16.000000 MHz Mode of Oscillation Fundamental Storage Temperature Range -40°C to +85°C Operating Temperature Range -20°C to +75°C Frequency Stability over Operating Temperature Range +/-10 ppm (referred to the value at 25°C) Frequency Perturbation +/-1.0 ppm Frequency Make Tolerance (FL) +/-10 ppm @ 25°C +/- 3°C Equivalent Series Resistance (ESR) 50 Ω max Nominal Drive Level 100 uW Shunt Capacitance (Co) 2 pF max Load Capacitance (CL) 9 pF Pulling Sensitivity 17 ppm/pF min (Load @ 9pF) Marking Laser Marking Aging +/-1ppm/ year @25°C Unit Weight 0.023+/-0.005g TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 Mechanical Dimensions (mm): Base1 #1 pin #2 pin #3 pin #4 pin Pin Connection IN/OUT GND IN/OUT GND Base2 #1 pin #2 pin #3 pin #4 pin TAI-SAW TECHNOLOGY CO., LTD. Pin Connection IN/OUT GND IN/OUT GND TST DCC Release document 4 Recommended Land Pattern: (unit: mm) Marking: Line 1: P/N: 111 Line 2: TST Logo + Crystal Product Code + Date Code Product Code Table Date Code Table WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 A B C D E F G H I J K L WK13 M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w x y z TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 Reel Dimensions (mm): Tape Dimensions (mm): Direction of Feed [NOTE]: 1. Unless otherwise specified tolerance on dimension +/-0.1 mm. 2. Material: conductive polystyrene with color black. 3. 10 pitch cumulative tolerance +/-0.2 mm. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 Packing Quantity/Packing: 1K pcs maximum per reel Reflow Profile: Note: 1.Max peak temperature: 260+/-5 deg C; Time: 10+/-2 sec 2. Temperature: 217+/-5 deg C; Time: 90~100 sec TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7 Reliability Specifications Test name Reference standard Test process / method Mechanical characteristics resistance to Soldering heat (IR reflow) Temp./ Duration : 260°C /10sec ×2 times Total time : 4min.(IR-reflow) Vibration Total peak amplitude : 1.5mm Vibration frequency : 10 to 55 Hz Sweep period : 1.0 minute Vibration directions : 3 mutually perpendicular Duration : 2 hr / direc. directions : 3 impacts per axis Acceleration : 3000g's, +20/-0 % Duration : 0.3 ms (total 18 shocks) Waveform : Half-sine Solder Temperature:265±5°C Duration time: 5±0.5 seconds. Mechanical Shock Solderability EIAJED-4701 -300(301)M(II) MIL-STD 202F method 201A MIL-STD 202F method 213C MIL-STD 883G method 2003 Environmental characteristics Thermal Shock Humidity test Dry heat ( Aging test ) PCT test Heat cycle conditions -55 ℃ (30min) ←→ * cycle time : 10 times 125 ℃ (30min) Temperature : 70 ± 2 °C Relative humidity : 90~95% Duration : 96 hours Temperature : 125 ± 2 °C Duration : 168 hours 2 MIL-STD 883G method 1010.7 MIL-STD 202F method 103B 5 Pressure: 2.06kg/cm (2.03*10 pa) Temperature : 121 ± 2 °C Relative humidity : 100% Duration : 24 hours TAI-SAW TECHNOLOGY CO., LTD. MIL-STD 883G method 1008.2 condition C EIAJED-4701-3 B-123A TST DCC Release document 8