TAI-SAW TECHNOLOGY CO., LTD. No.3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, Taiwan, R.O.C. TEL : 886-3-4690038 FAX : 886-3-4697532 E-mail : [email protected] Web: www.taisaw.com IF SAW Filter 45.75 MHz MODEL NO.: TB0792A Rev No.2 A. FEATURES: 1.IF Filter for Digital TV B. MAXIMUM RATING: 1.DC voltage: 12 V. 2.AC voltage: 10 V. 3.Storage Temperature: -40°C to +85 °C. 4.Operating Temperature: -25 °C to +65 °C Electrostatic Sensitive Device C. ELECTRICAL CHARACTERISTICS: MIN. TYP. MAX. Reference level for the Following data 43.5 MHz 26.8 28.8 30.8 dB 45.75 MHz 46.50 MHz 41.25 MHz 39.75 MHz 47.25 MHz Lower side lobe 35.00-39.25 MHz Upper side lobe 47.65-50.00 MHz Reflected Wave Signal Suppression Feed through Signal Suppression Group delay ripple Impedance at 43.5 MHz Input Impedance Output Impedance Temperature Coefficient of frequency -1.2 0.9 -1.1 30.0 30.0 -0.2 1.9 -0.1 34.0 43.0 0.8 2.9 0.9 - dB dB dB dB dB 28.0 41.0 - dB 28.0 42.0 50.0 - 37.0 52.0 56.0 60 - dB dB dB ns 2.9||15.0 0.5||12.0 -72.0 - Insertion attenuation - TAI-SAW TECHNOLOGY CO., LTD. - - KΩ||pF KΩ||pF ppm/K TST DCC Release document 2 D.FREQUENCY CHARACTERISTICS: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 E.TEST CIRCUIT F. Outline Drawing Unit: mm 7 9 2 1 T Δ □ Pin No. Functions 1. Input 2. Input - ground 3. Chip carrier - ground 4. Output 5. Output □ : Week Code △ : Product / Year Code TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 Product Code Table Year 2013 2017 2014 2018 2015 2019 2016 2020 Product Code B b B b Week Code Table WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 WK13 A B C D E F G H I J K L M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w x y z G. PACKING 1 Plastic tube (1:5) A plastic tube contains 25PCS saw filters. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 2 .double-trough Styrofoam (1:2) The plastic tubes were be placed in the double-trough Styrofoam. One trough contains 1000PCS saw filters, so a double-trough Styrofoam can contains 2000PCS saw filters. 3. Plastic tube in double-trough Styrofoam view(1:2) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 4. Inner carton box (1:4) An inner carton box contains one double-trough Styrofoam. 5.Inner carton box view Inner Carton Box Packing two unit, each unit with one label La 75㊣1.0 Outside l be La l be 460㊣1.0 Outside 170㊣1.0 Outside double-trough styrofoam Plastic tube each one contains 25pcs One Unit contains 1000pcs(40*25pcs) The Inner Carton Box contains 2000pcs (2*1000pcs) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7 6.Outer carton box (1:4) A outer carton box contains four inner carton boxes, so one outer carton box contains 8000PCS saw filters. φ=25mm Storage condition after packing 1. Storage temperature:-10℃~+40℃ 2. Storage humidity:40%~70% 3. Using deadline: 2 year after purchasing Soldering Ability should be checked if over the using deadline 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 Temp ( Deg C) H. RECOMMENDED REFLOW PROFILE Time (Sec) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 8