TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com IF SAW Filter 44MHz(BW=6.0MHz) for digital TV MODEL NO.: TB0496A REV. NO.3 A. MAXIMUM RATING: DC voltage VDC AC voltage VPP Operating Temperature Range TA Storage Temperature Range Tstg 12 10 -25~65 -40~85 V V ℃ ℃ Between any terminals Between any terminals RoHS Compliant Lead free Lead-free soldering B. Characteristics : 1. Electronic Characteristics Reference temperature: Ta=25℃ Terminating source impedance ZS=50Ω Terminating load impedance ZL=2kΩ//3pF Electrostatic Sensitive Device 2 .Amplitude Characteristics MIN. TYP. MAX. - 44.00 - MHz 12.7 14.7 16.7 dB 0.0 -1.2 -1.1 1.5 1.8 6.3 39.0 0.4 6.0 7.6 0.3 0.4 2.7 3.0 8.3 55.0 1.0 1.8 1.9 3.8 4.2 10.3 - dB MHz MHz dB dB dB dB dB dB 42.0 37.0 47.0 47.0 - dB dB 35.0 41.0 42.0 50.0 42.0 51.0 52.0 56.0 - dB dB dB dB - 40 - ns Center frequency fc Center frequency between 3dB point Insertion attenuation Reference level for the Following data 44.06 MHz Amplitude ripple 41.53-46.59 MHz 3dB Pass Bandwidth 30dB Pass Bandwidth 41.53 MHz 46.59 MHz 41.06 MHz 47.06 MHz 47.31 MHz 39.81 MHz Lower side lobe 35.06 to 39.46 MHz 39.46 to 40.06 MHz Upper side lobe 48.06 to 50.06 MHz 50.06 to 55.06 MHz Reflected Wave Signal Suppression Feed through Signal Suppression Group delay ripple 41.53 … 46.59 MHz TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 2 - Impedance at 44.06 MHz Input Impedance Output Impedance Temperature Coefficient of frequency - 1.3||16.1 1.1||5.6 -72.0 - KΩ||pF KΩ||pF ppm/K C. Frequency Characteristics : 1. S21 Response: (span 20MHz) Fig.1 Horizontal : 2MHz/Div Fig.2 Horizontal : 0.8MHz/Div Vertical: 10B/Div Vertical: 1dB/Div TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 3 - D. TEST CIRCUIT: E. Outline Drawing: 4 9 6 T Δ □ Pin No. Functions 1. 2. 3. 4. 5. Input Input - ground Chip carrier - ground Output Output □ : Week Code △ : Product / Year Code Product Code Table Year 2009 2013 2010 2014 2011 2015 2012 2016 Product Code B b B b TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 4 - Date Code Table WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 WK13 A B C D E F G H I J K L M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w x y z G. Packing: 1.Plastic tube (1:5) A plastic tube contains 28PCS saw filters. 2 .double-trough Styrofoam (1:2) The plastic tubes were be placed in the double-trough Styrofoam. One trough contains 1000PCS saw filters, so a double-trough Styrofoam can contains 2000PCS saw filters. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 5 - 3. Plastic tube in double-trough Styrofoam view(1:2) 4. Inner carton box (1:4) An inner carton box contains one double-trough Styrofoam. A Bottom left corner of A: TYPE__________ QUANTITY____________ Top right corner of A: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 6 - 5.Inner carton box view Inner Carton Box Packing two unit, each unit with one label La be 62㊣1.0 Outside l La be l 458㊣1.0 Outside 160㊣1.0 Outside double-trough styrofoam Plastic tube each one contains 28pcs One Unit contains1000pcs(35* 28pcs+1* 20pcs) The Inner Carton Box contains 2000pcs (2* 1000pcs) 6.Outer carton box (1:4) A outer carton box contains four inner carton boxes, so one outer carton box contains 8000PCS saw filters. φ=25mm The two sides: Storage condition after packing 1. Storage temperature:-10℃~+40℃ 2. Storage humidity:40%~70% 3. Using deadline: 2 year after purchasing 4. Soldering Ability should be checked if over the using deadline TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 7 -