2.5 dB NF, 16 dBm P1dB, 0.009 MHz to 3 GHz, Low Noise Amplifier, 32 dB Gain, SMA TECHNICAL DATA SHEET PE15A1007 PE15A1007 is a wideband low noise RF coaxial amplifier operating in the 9 kHz to 3 GHz frequency range. The amplifier offers 2.5 dB typical noise figure, 16 dBm of P1dB and high 32 dB minimum small signal gain with gain flatness of ±1.5dB maximum. This exceptional technical performance is achieved through the use of hybrid MIC design and advanced SiGe Bipolar devices. The low noise amplifier requires typically a +12V DC power supply. The connectorized SMA module is unconditionally stable and includes built-in voltage regulation. This low noise amplifier requires only a single positive supply, is unconditionally stable and operates over the temperature range of -40°C and +85°C. Features • • • • • • 9 kHz to 3 GHz Frequency Range P1dB: 16 dBm High Small Signal Gain: 32 dB minimum Gain Flatness: ±1.25 dB Gain Variance: ±1 dB Noise Figure: 2.5dB typ • • • • • • Reverse Isolation: 65 dB 50 Ohm Input and Output Matched -40 to 85°C Operating Temperature Unconditionally Stable Single DC Positive Supply Built-in Voltage Regulator Applications • • • • • • Laboratory Applications R&D Labs Military Radio Radar Systems Telecom Infrastructure Test Instrumentation • • • • • • Military & Space Communication Systems Wireless Communication Microwave Radio Systems Cellular Base Stations Low Noise Amplifier • • • • • • General Purpose Amplification General Purpose Wireless Wideband Gain Block IF Amplifier/RF Driver Amplifier RF Wideband Front Ends RF Pre-amplification Electrical Specifications (TA = +25°C, DC Voltage = 12Volts, DC Current = 110mA) Description MinimumTypical Maximum Units Frequency Range 0 Small Signal Gain 32 Gain Flatness ±1.25 3 GHz 36 dB ±1.5 dB Gain Variance at OTR* ±1 dB Output at 1 dB Compression Point +15 +16 dBm Output at 1 dB Compression Point +15 +16 dBm Noise Figure (10 MHz to 3 GHz) 2.5 Input VSWR 1.6:1 2:1 Output VSWR 1.8:1 2.5:1 Reverse Isolation 60 3 65 Spurious -60 Operating DC Voltage 12 Operating DC Current 90 110 Operating Temperature Range -40 dB dB dBc Volts 130 mA +75 °C Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 2.5 dB NF, 16 dBm P1dB, 0.009 MHz to 3 GHz, Low Noise Amplifier, 32 dB Gain, SMA PE15A1007 PE15A1007 REV 1.0 1 2.5 dB NF, 16 dBm P1dB, 0.009 MHz to 3 GHz, Low Noise Amplifier, 32 dB Gain, SMA TECHNICAL DATA SHEET PE15A1007 . . *OTR= Base Plate Operating Temperature Range Absolute Maximum Rating Parameter Rating Units Source Voltage +15 Volts RF input Power +5 dBm Operating Temperature (base-plate) -55 to +125 °C Storage Temperature -40 to +85 °C ESD Sensitive Material, Transport material in Approved ESD bags. Handle only in approved ESD Workstation. . Mechanical Specifications Size Length Width Height 1.5 in [38.1 mm] 0.85 in [21.59 mm] 0.375 in [9.53 mm] Input Connector Output Connector SMA Female SMA Female . Environmental Specifications Temperature Operating Range Storage Range -40 to +75 deg C -55 to +125 deg C . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Plotted and Other Data Notes: • Values at +25 °C, sea level • ESD Sensitive Material, Transport material in Approved ESD bags. Handle only in approved ESD Workstation. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 2.5 dB NF, 16 dBm P1dB, 0.009 MHz to 3 GHz, Low Noise Amplifier, 32 dB Gain, SMA PE15A1007 PE15A1007 REV 1.0 2 2.5 dB NF, 16 dBm P1dB, 0.009 MHz to 3 GHz, Low Noise Amplifier, 32 dB Gain, SMA TECHNICAL DATA SHEET PE15A1007 Typical Performance Data dB Gain, Input Return Loss and Output Return Loss 40 30 Gain(dB) 25 C 20 IN_Return Loss(dB) 10 OUT_Return Loss(dB) 0 -10 -20 -30 -40 Freq.(MHz) dB Noise Figure 3 2.8 2.6 2.4 2.2 2 1.8 1.6 1.4 Noise Figure 1.2 10 110 210 310 410 510 610 710 810 910 1010 1110 1210 1310 1410 1510 1610 1710 1810 1910 2010 2110 2210 2310 2410 2510 2610 2710 2810 2910 3000 1 Freq.(MHz) Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 2.5 dB NF, 16 dBm P1dB, 0.009 MHz to 3 GHz, Low Noise Amplifier, 32 dB Gain, SMA PE15A1007 PE15A1007 REV 1.0 3 2.5 dB NF, 16 dBm P1dB, 0.009 MHz to 3 GHz, Low Noise Amplifier, 32 dB Gain, SMA TECHNICAL DATA SHEET PE15A1007 2.5 dB NF, 16 dBm P1dB, 0.009 MHz to 3 GHz, Low Noise Amplifier, 32 dB Gain, SMA from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and millimeter wave products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 2.5 dB NF, 16 dBm P1dB, 0.009 MHz to 3 GHz, Low Noise Amplifier, 32 dB Gain, SMA PE15A1007 URL: http://www.pasternack.com/2.5-db-3-ghz-low-noise-amplifier-32-db-gain-sma-pe15a1007-p.aspx PE15A1007 REV 1.0 4 PE15A1007 CAD Drawing 2.5 dB NF, 16 dBm P1dB, 0.009 MHz to 3 GHz, Low Noise Amplifier, 32 dB Gain, SMA PE15A1007 REV 1.0 5