40 dB Gain, 25 dBm IP3, 0.8 dB NF, 11 dBm P1dB, 1 GHz to 2 GHz, Low Noise High Gain Amplifier SMA TECHNICAL DATA SHEET PE15A1019 PE15A1019 is a wideband low noise RF coaxial power amplifier operating in the 1 GHz to 2 GHz frequency range. The amplifier offers 0.8 dB noise figure typical, 11 dBm of P1dB and 40 dB small signal gain with gain flatness of ±1.0 dB. The low noise amplifier requires typically a +10V DC power supply and is unconditionally stable. The amplifier operates over the temperature range of -40°C and +85°C. Features • • • • • • 1 GHz to 2 GHz Frequency Range Noise Figure: 0.8 dB typ P1dB: 11 dBm Flat Small Signal Gain: 40 dB Gain Flatness: ±1 .0 dB Gain Variance over OTR: ±1 .0 dB • • • • • 50 Ohm Input and Output Matched -40 to 85°C Operating Temperature Unconditionally Stable Single DC Positive Supply Built-in Voltage Regulator Applications • • • • • • Laboratory Applications R&D Labs Military Radio Radar Systems Telecom Infrastructure Test Instrumentation • • • • • • Military & Space Communication Systems Wireless Communication Microwave Radio Systems Cellular Base Stations Low Noise Amplifier • • • • • • General Purpose Amplification General Purpose Wireless Wideband Gain Block IF Amplifier/RF Driver Amplifier RF Wideband Front Ends RF Pre-amplification Electrical Specifications (TA = +25°C, DC Voltage = 10Volts, DC Current = 120mA) Description MinimumTypical Maximum Units Frequency Range 1 2 Small Signal Gain 37 43 Gain Flatness 40 ±1 GHz dB dB Gain Variance at OTR* ±1 dB Output at 1 dB Compression Point +11 dBm Output 3rd Intercept Point +25 dBm +22 Noise Figure 0.8 Input VSWR 1.7:1 Output VSWR 1.6:1 1 dB 2:1 2:1 Spurious -60 dBc Operating DC Voltage 9 10 12 Volts Operating DC Current 100 120 135 mA Operating Temperature Range -40 +85 °C . . *OTR= Base Plate Operating Temperature Range Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 40 dB Gain, 25 dBm IP3, 0.8 dB NF, 11 dBm P1dB, 1 GHz to 2 GHz, Low Noise High Gain Amplifier SMA PE15A1019 PE15A1019 REV 1.0 1 40 dB Gain, 25 dBm IP3, 0.8 dB NF, 11 dBm P1dB, 1 GHz to 2 GHz, Low Noise High Gain Amplifier SMA TECHNICAL DATA SHEET PE15A1019 Absolute Maximum Rating Parameter Rating Units Source Voltage +15 Volts RF input Power +13 dBm DC Voltage at RF I/O +25 Volts Operating Temperature (base-plate) -40 to +85 °C Storage Temperature -55 to +125 °C ESD Sensitive Material, Transport material in Approved ESD bags. Handle only in approved ESD Workstation. . Mechanical Specifications Size Length Width Height 1.5 in [38.1 mm] 0.85 in [21.59 mm] 0.375 in [9.53 mm] Input Connector Output Connector SMA Female SMA Female . Environmental Specifications Temperature Operating Range Storage Range -40 to +85 deg C -55 to +125 deg C . Compliance Certifications (visit www.Pasternack.com for current document) Not RoHS Compliant Plotted and Other Data Notes: • Values at +25 °C, sea level • ESD Sensitive Material, Transport material in Approved ESD bags. Handle only in approved ESD Workstation. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 40 dB Gain, 25 dBm IP3, 0.8 dB NF, 11 dBm P1dB, 1 GHz to 2 GHz, Low Noise High Gain Amplifier SMA PE15A1019 PE15A1019 REV 1.0 2 40 dB Gain, 25 dBm IP3, 0.8 dB NF, 11 dBm P1dB, 1 GHz to 2 GHz, Low Noise High Gain Amplifier SMA TECHNICAL DATA SHEET PE15A1019 Typical Performance Data dB Gain, Input Return Loss and Output Return Loss 50 40 30 Gain(dB) 25 C 20 IN_Return Loss(dB) 10 OUT_Return Loss(dB) 0 -10 -20 -30 Freq.(MHz) dB Noise Figure 2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 Noise Figure 0.2 0 Freq.(MHz) Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 40 dB Gain, 25 dBm IP3, 0.8 dB NF, 11 dBm P1dB, 1 GHz to 2 GHz, Low Noise High Gain Amplifier SMA PE15A1019 PE15A1019 REV 1.0 3 40 dB Gain, 25 dBm IP3, 0.8 dB NF, 11 dBm P1dB, 1 GHz to 2 GHz, Low Noise High Gain Amplifier SMA TECHNICAL DATA SHEET PE15A1019 40 dB Gain, 25 dBm IP3, 0.8 dB NF, 11 dBm P1dB, 1 GHz to 2 GHz, Low Noise High Gain Amplifier SMA from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and millimeter wave products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 40 dB Gain, 25 dBm IP3, 0.8 dB NF, 11 dBm P1dB, 1 GHz to 2 GHz, Low Noise High Gain Amplifier SMA PE15A1019 URL: http://www.pasternack.com/40-db-0.8-db-2-ghz-low-noise-high-gain-amplifier-sma-pe15a1019-p.aspx PE15A1019 REV 1.0 4 PE15A1019 CAD Drawing 40 dB Gain, 25 dBm IP3, 0.8 dB NF, 11 dBm P1dB, 1 GHz to 2 GHz, Low Noise High Gain Amplifier SMA PE15A1019 REV 1.0 5