Z-Power LED X10490 Technical Data Sheet Specification SAWX5X0X (AX52X0-01) SSC Drawn Approval 고객명 Approval Rev. 01 September 2012 1 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-18 (Rev.00) Z-Power LED X10490 Technical Data Sheet Contents 1. Description 2. Part number 3. Mechanical dimensions 4. Optical and thermal characteristics 5. Color spectrum, Ta=25oC 6. Radiant pattern, Ta=25oC 7. I-V characteristics, Ta=25oC 8. Relative Flux vs. Forward voltage 9. Relative Flux vs. Junction temperature 10. Forward Current vs. Junction temperature 11. Acriche Binning structure graphical representation 12. Operating and biasing instructions of SAWX5X0X(AX52X0-01) 13. Emitter Reel Packaging 14. Solder profile 15. Precautions for use 16. Handling of silicone resin for LEDs Rev. 01 September 2012 2 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-18 (Rev.00) Z-Power LED X10490 Technical Data Sheet SAWX5X0X Description Features The Acriche series of devices are designed for ease of implementation and readily connect to AC sources emitting very high flux while avoiding power losses associated with AC to regulated DC conversion. • Connect directly in AC power • Power Saving • Long Life Time • Simple BOM • Miniaturization • Low thermal resistance • SMT solderbility • Lead Free product • RoHS compliant Acriche is a long-lasting, environmentally friendly semiconductor light source that can be attached either directly to AC voltages. Acriche’s thermal management exceeds other power LED solutions incorporating state-of-the-art SMD technology, thermal path design, and materials. Whether designing a spot light or tiled array the Acriche A5 is an ideal light source for general purpose illumination applications. This application note provides binning and labeling information of A5 series. It includes the A5 bins for luminous flux, color coordinates and correlated color temperature for white. Applications • • • • 100V / 110V / 120V Architectural lighting Residential lighting Task lighting Decorative / Pathway lighting 220V / 230V * The appearance and specifications of the product can be changed for improvement without notice. Rev. 01 September 2012 3 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-18 (Rev.00) Z-Power LED X10490 Technical Data Sheet Part number 1. Part Number form : SA X1 X2 X3 X4 X5X6 – X7X8X9X10X11 W0 Cool White W8 Warm White 5 A5 series B 100V / 110V / 120V, RMS D 220V / 230V, RMS PCB type 0 Emitter X6 Revision X Internal code (Rev.0 : A / Rev.1 : B / Rev.2 : C) X7X8 Brightness bin - - X9X10 Color bin - - X11 VF bin - - X1 X2 Color X3 Acriche series X4 Voltage X5 2. Sticker Diagram on Reel & Aluminum Vinyl Bag PART NO. : SA X1 X2 X3 X4 X5X6 QUANTITY : ### LOT NUMBER : ########## BIN CODE : X7 X8 X9 X10 X11 * For more information about binning and labeling, refer to the SAWX5X0X Bin & Labeling Rev. 01 September 2012 4 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-18 (Rev.00) Z-Power LED X10490 Technical Data Sheet Mechanical dimensions 1. Outline dimensions 7.0 6.4 Thermal path 7.0 6.4 2.6 4.4 2.95 1.0 2. Recommended PCB solder pad 6.4 Temperature check point 6.4 0.5 2.6 4.4 * Notes : [1] [2] [3] [4] [5] [6] All dimensions are in millimeters. (Tolerance : ±0.2) Scale : none The appearance and specifications of the product may be changed for improvement without notice Electrically neutral thermal path Do not design solder-pad larger than recommended size. Excess solder paste may form solder ball and create electrical short between internal pads. Rev. 01 September 2012 5 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-18 (Rev.00) Z-Power LED X10490 Technical Data Sheet Optical and thermal characteristics 1. SAW05B0X(AW5200-01) 1-1 Electro-Optical characteristics at 100V/110V/120V[RMS] Ta=25ºC Value Parameter Symbol Unit Min Typ Max ФV [2] - 120 - lm CCT - 6300 - K CRI Ra - 70 - - Operating Current Iopt - 20 - mA [RMS] Power Dissipation PD 1.65 W Operating Frequency Freq 50 / 60 Hz View Angle 2Θ 1/2 145 deg. Luminous Flux [1] Correlated Color Temperature [3] 1-2 Absolute Maximum Ratings Parameter Symbol Value Unit Operating Voltage vopt [4] 115/127/138 V [RMS] Power Dissipation PD - W Junction Temperature Tj 125 ºC Operating Temperature Topr -30 ~ +85 ºC Storage Temperature Tstg -40 ~ +120 ºC ESD Sensitivity - ±2,000V HBM - * Notes : [1] Acriche series maintains a tolerance of 10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT 5% tester tolerance [4] ‘Operating Voltage' doesn't indicate the maximum voltage which customers use, but it means tolerable voltage according to the voltage variation rate by one's country. It is recommended that the temperature of solder pad should be below 70℃. Rev. 01 September 2012 6 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-18 (Rev.00) Z-Power LED X10490 Technical Data Sheet Optical and thermal characteristics 2. SAW05D0X(AW5220-01) 2-1 Electro-Optical characteristics at 220V/230V[RMS] Ta=25ºC Value Parameter Symbol Unit Min Typ Max ФV [2] - 120 - lm CCT - 6300 - K CRI Ra - 70 - - Operating Current Iopt - 10 - mA [RMS] Power Dissipation PD 1.65 W Operating Frequency Freq 50 / 60 Hz View Angle 2Θ 1/2 145 deg. Luminous Flux [1] Correlated Color Temperature [3] 2-2 Absolute Maximum Ratings Parameter Symbol Value Unit Operating Voltage vopt [4] 253/265 V [RMS] Power Dissipation PD - W Junction Temperature Tj 125 ºC Operating Temperature Topr -30 ~ +85 ºC Storage Temperature Tstg -40 ~ +120 ºC ESD Sensitivity - ±2,000V HBM - * Notes : [1] Acriche series maintains a tolerance of 10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT 5% tester tolerance [4] ‘Operating Voltage' doesn't indicate the maximum voltage which customers use, but it means tolerable voltage according to the voltage variation rate by one's country. It is recommended that the temperature of solder pad should be below 70℃. Rev. 01 September 2012 7 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-18 (Rev.00) Z-Power LED X10490 Technical Data Sheet Optical and thermal characteristics 3. SAW85B0X(AN5200-01) 3-1 Electro-Optical characteristics at 100V/110V/120V [RMS] Ta=25ºC Value Parameter Symbol Unit Min Typ Max ФV [2] - 80 - lm CCT - 3000 - K CRI Ra - 80 - - Operating Current Iopt - 20 - mA [RMS] Power Dissipation PD 1.65 W Operating Frequency Freq 50 / 60 Hz View Angle 2Θ 1/2 135 deg. Luminous Flux [1] Correlated Color Temperature [3] 3-2 Absolute Maximum Ratings Parameter Symbol Value Unit Operating Voltage vopt [4] 115/127/138 V [RMS] Power Dissipation PD - W Junction Temperature Tj 125 ºC Operating Temperature Topr -30 ~ +85 ºC Storage Temperature Tstg -40 ~ +120 ºC ESD Sensitivity - ±2,000V HBM - * Notes : [1] Acriche series maintains a tolerance of 10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT 5% tester tolerance [4] ‘Operating Voltage' doesn't indicate the maximum voltage which customers use, but it means tolerable voltage according to the voltage variation rate by one's country. It is recommended that the temperature of solder pad should be below 70℃. Rev. 01 September 2012 8 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-18 (Rev.00) Z-Power LED X10490 Technical Data Sheet Optical and thermal characteristics 4. SAW85D0X(AN5220-01) 4-1 Electro-Optical characteristics at 220V/230V[RMS] Ta=25ºC Value Parameter Symbol Unit Min Typ Max ФV [2] - 80 - lm CCT - 3000 - K CRI Ra - 80 - - Operating Current Iopt - 10 - mA [RMS] Power Dissipation PD 1.65 W Operating Frequency Freq 50 / 60 Hz View Angle 2Θ 1/2 135 deg. Luminous Flux [1] Correlated Color Temperature [3] 4-2 Absolute Maximum Ratings Parameter Symbol Value Unit Operating Voltage vopt [4] 253/265 V [RMS] Power Dissipation PD - W Junction Temperature Tj 125 ºC Operating Temperature Topr -30 ~ +85 ºC Storage Temperature Tstg -40 ~ +120 ºC ESD Sensitivity - ±2,000V HBM - * Notes : [1] Acriche series maintains a tolerance of 10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT 5% tester tolerance [4] ‘Operating Voltage' doesn't indicate the maximum voltage which customers use, but it means tolerable voltage according to the voltage variation rate by one's country. It is recommended that the temperature of solder pad should be below 70℃. Rev. 01 September 2012 9 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-18 (Rev.00) Z-Power LED X10490 Technical Data Sheet Color spectrum, Ta=25oC 1.4 Cool White Warm White Photopic sensitivity curve Relative Intensity [a.u.] 1.2 1.0 0.8 0.6 0.4 0.2 0.0 300 400 500 600 700 800 900 60 90 Wavelength (nm) Radiation pattern, Ta=25oC Relative Intensity [a.u.] 1.0 Cool White Warm White 0.8 0.6 0.4 0.2 0.0 -90 -60 -30 0 30 Directional angle [deg.] Rev. 01 September 2012 10 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-18 (Rev.00) Z-Power LED X10490 Technical Data Sheet I-V characteristics, Ta=25oC 1. SAWX5B0X with external resistor @ 100V and 110V, 120V 40 100V 110V 120V Current [RMS , mA] 30 20 10 0 0 25 50 75 100 125 Voltage [RMS , V] 2. SAWX5D0X with external resistor @ 220V and 230V 20 220V 230V Current [RMS , mA] 15 10 5 0 0 30 60 90 120 150 180 210 240 270 Voltage [RMS , V] Rev. 01 September 2012 11 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-18 (Rev.00) Z-Power LED X10490 Technical Data Sheet Relative Flux vs. Forward voltage 1. SAWX5B0X with external resistor @ 100V and 110V, 120V Relative Lumious Flux(a.U) 2.5 100V 110V 120V 2.0 1.5 1.0 0.5 0.0 80 90 100 110 120 130 140 Voltage [RMS , V] Relative Lumious Flux(a.U) 2. SAWX5D0X with external resistor @ 220V and 230V 2.0 220V 230V 1.5 1.0 0.5 0.0 180 200 220 240 260 Voltage [RMS , V] Rev. 01 September 2012 12 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-18 (Rev.00) Z-Power LED X10490 Technical Data Sheet Relative Flux vs. Junction temperature 1. SAWX5B0X with external resistor @110V (20mA,RMS @ 110V,RMS / Tj=25oC, Initial point) Relative Luminous Flux [%] 120 100 80 60 110V 40 20 0 25 50 75 100 125 o Junction temperature [ C] 2. SAWX5D0X with external resistor @220V (10mA,RMS @ 220V,RMS / Tj=25oC, Initial point) Relative Luminous Flux [%] 120 100 80 60 220V 40 20 0 25 50 75 100 125 o Junction temperature [ C] Rev. 01 September 2012 13 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-18 (Rev.00) Z-Power LED X10490 Technical Data Sheet Forward Current vs. Junction temperature 1. SAWX5B0X with external resistor @ 110V (20mA,RMS @ 110V,RMS / Tj=25oC, Initial point) 30 Foward Current [mA,rms] 110V 28 26 24 22 20 25 50 75 100 125 o Junction temperature [ C] 2. SAWX5D0X with external resistor @ 220V (10mA,RMS @ 220V,RMS / Tj=25oC, Initial point) 15 Foward Current [mA,rms] 220V 14 13 12 11 10 25 50 75 100 125 o Junction temperature [ C] Rev. 01 September 2012 14 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-18 (Rev.00) Z-Power LED X10490 Technical Data Sheet Acriche Binning structure graphical representation 1. SAWX5X0X 0.46 2700K 0.44 3000K 3200K F9 3700K G0 F8 F1 0.40 F3 F2 5000K 0.38 CIE Y G2 F0 4700K 0.36 F4 C8 B9 6000K B8 G6 0.30 H7 C3 B1 C2 C5 B3 C4 6500K C7 A1 B2 B5 C6 7000K A0 A3 B4 B7 A2 A5 B6 7600K Z1 A4 A7 Z3 8200K A6 A9 Z5 Z2 Z4 Z7 A8 Z6 H6 F7 B0 0.32 G7 F6 C1 C0 G4 H3 H5 H4 G5 F5 C9 5300K 5600K H2 G3 H1 H0 G1 H9 H8 G9 G8 3500K 0.42 0.34 2600K 2900K Cool White Warm White Planckian locus Energy star rank Z9 Z8 0.28 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 CIE X *Notes : For more detailed information on Acriche binning see the “Binning and Labeling(A5 series)” document at www.Acriche.com Rev. 01 September 2012 15 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-18 (Rev.00) Z-Power LED X10490 Technical Data Sheet Operating and biasing instructions of SAWX5X0X(AX52X0-01) 1. Operating circuit Attention: see notes 1 through 4 below R AC Voltage 2. Resistor sheet VF BIN code SAWX5B0X (AX5200-01) [1] SAWX5D0X (AX5220-01) [1] Drive current : 20mA [RMS] [2] Drive current : 10mA [RMS] [2] Resistor value [3] [4] Resistor value [3] [4] 100V 110V 120V 220V 230V A 640 Ω 1120 Ω 1550 Ω 4500 Ω 5430 Ω B 580 Ω 1020 Ω 1470 Ω 4230 Ω 4850 Ω C 540 Ω 980 Ω 1430 Ω 3890 Ω 4830 Ω D 420 Ω 850 Ω 1330 Ω 3490 Ω 4250 Ω Notes : [1] External resistor is required for proper Acriche biasing. [2] Drive current and voltage levels must not cause Acriche to operate outside Absolute Maximum Rating for power dissipation in table 1-2. [3] Drive current tolerance is 10% on each resistor value. [4] Resistor power value must be taken into consideration when choosing the type of resistor. [rated power = operating current² X resistance] Rev. 01 September 2012 16 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-18 (Rev.00) Z-Power LED X10490 Technical Data Sheet 6 PS 06 20 40 80 60 Emitter Reel Packaging EIAJ RRM 16 D * Notes : [1] The number of loaded products in the reel is 500 or 1000ea [2] All dimensions are in millimeters (tolerance : ±0.2) [3] Scale none Rev. 01 September 2012 17 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-18 (Rev.00) Z-Power LED X10490 Technical Data Sheet Solder profile 1. Reflow solder conditions / profile Reflow condition Average ramp-up rate (TS-max to Peak) Pb-Free assembly 2~3℃ / second Preheat Temperature Min (TS-min) 150℃ Preheat Temperature Max (TS-max) 200℃ Time maintained above: : Liquidus Temperature (TL) Time maintained above: Time (tL) Peak Temperature (TP) 217~220℃ 60~150 seconds 250℃ Time within 5℃ of actual Peak Temperature (tP) 20~40 seconds ramp-down rate 4~6℃ / second Time 25℃ to Peak Temperature 6 minutes max 2. Hand Solder conditions 2-1 Lead : Not more than 3 seconds @MAX280℃ 2-2 Slug : Use a thermal-adhesives * Caution [1] Reflow soldering should not be done more than one time. [2] Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable, suitable tools have to be used. [3] Die slug is to be soldered. [4] When soldering, do not put stress on the LEDs during heating. [5] After soldering, do not warp the circuit board. [6] Recommend to use a convection type reflow machine with 7 ~ 8 zones. Rev. 01 September 2012 18 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-18 (Rev.00) Z-Power LED X10490 Technical Data Sheet Precautions for use [1] Please note Acriche runs on high voltage so use caution when near the leads or if a dome is inadvertently removed while circuit is active [2] Please do not touch any of the circuit board, components or terminals with bare hands or metal while circuit is electrically active. [3] Please do not add or change wires while Acriche circuit is active Handling of silicone resin for LEDs [1] Acriche series is encapsulated by silicone resin for the highest flux efficiency. [2] Avoid touching silicone resin portion of LED especially with sharp tools such as Pincette (tweezers). [3] Avoid leaving fingerprints on silicone resin parts. [4] Silicone resin is dust sensitive and needs a covered container for storage [5] When populating boards in SMT production there are no unusual restrictions regarding the form of the pick and place nozzle except that mechanical essure on the surface of the resin must be avoided. [6] Please do not apply diagonal force to the silicone lens in excess of 3000gf or permanent and fatal damage will occur. [7] Please do not cover the silicone resin with any other resin (epoxy, urethane, etc) Rev. 01 September 2012 19 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-18 (Rev.00)