SHEET 1 OF 1 2.54 [.100 in] 5.08 [.200 in] 2 1 3 8.13 [.320 in] n1.09 [.043 in] 4 6 5 PCB MOUNTING 9.14 [.360 in] n6.00 [.236 in] SWITCH FUNCTION POS. 1 POS. 2 4.39 [.173 in] FLAT POS. 3 ISOMETRIC ON NONE ON 2-3, 5-6 OPEN 2-1, 5-4 POS. 1 n2.54 [.100 in] POS. 3 25~ 2 5 9.37 [.369 in] 5.59 [.220 in] 1 3 4 1/4-48 UNS-2A THREADS 6 CIRCUIT DIAGRAM: DPDT NOTE: 1. ALL DIMENSIONS IN mm [INCH] 2. GENERAL TOLERANCE: X.X=±0.4 X.XX=±0.25 3. TERMINAL NUMBERS FOR REF ONLY 4. PLATING MATERIAL: SILVER 5. RATING: 3 AMPS @ 120VAC OR 28VDC; 1 AMPS @ 250VAC 6. ELECTRIC LIFE: 30,000 MAKE-AND-BREAK CYCLES AT FULL LOAD. 7. INSULATION RESISTANCE: 1,000 MEGA-OHM MIN. 8. DIELECTRIC STRENGTH: 1,000 V RMS @SEA LEVEL. 9. OPERATING TEMP.: -30°C to 85°C 10. DENOTES CRITICAL PARAMETER. 11. 2002/95/EC (ROHS) COMPLIANT 12. HARDWARE TO BE SHIPPED BULK T200001 - HEXNUT - QTY 2 T200000 - LOCKWASHER - QTY 1 T200002 - LOCKRING - QTY 1 B 20601 A 16809 REV PCR NO E-LOGO ON OPPOSITE SIDE .51 [.020 in] 8.64 [.340 in] 4 6 6 .51 [.020 in] 3 3.30 [.130 in] 2.54 [.100 in] 05/10/12 drg RELEASED FOR PRODUCTION 12/28/06 TN DATE BY THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED TITLE EPOXY SEAL .76 [.030 in] 5.08 [.200 in] ADDED TERMINAL NUMBERS DESCRIPTION 5 200MDP1T1B1M2QEH DATE DR 12/28/2006 TN REV DWG ST221022 B