AMP6401 series

AMP6401
6 3 W M e d i c a l G r ade Desktop Switching Power Adapters
series
Universal 90-264VAC Input
UL/cUL60601-1: 3rd Ed., EN60601-1: 3rd Ed.
Regulated Single Outputs
4000V Isolation
IEC320-C14 Input
LPS Efficiency Level V (Most Models)
2.99”W x 5.75”L x1.69”H
Model Number
Output Voltage Output Amps Regulation Max. Output Watts Output Connector
Efficiency
SINGLE OUTPUT
AMP6401-02
AMP6401-03
AMP6401-04
*AMP6401-05
*AMP6401-06
*AMP6401-07
*AMP6401-08
*AMP6401-09
*AMP6401-10
5
7
9
12
15
18
24
30
36
77%
77%
80%
87%
87%
87%
87%
87%
87%
9
7.85
6.44
5.25
4.2
3.5
2.62
2.1
1.75
7%
7%
5%
5%
5%
5%
3%
3%
3%
45W
55W
58W
63W
63W
63W
63W
63W
63W
DIN
DIN
DIN
DIN
DIN
DIN
DIN
DIN
DIN
*Note: These Models meet LPS Efficiency Level V
WWW.ASTRODYNE.COM
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
6 3 W M e d i c a l G r ade Desktop Switching Power Adapters
INPUT SPECIFICATIONS
Input Voltage Range
Frequency Range
Leakage Current
Input Current Lowline
Input Current Highline
Inrush Current Lowline
Inrush Current Highline
Power Consumption @ No Load
series
PHYSICAL SPECIFICATIONS
90-264 VAC
47-63 Hz
0.1mA typ. @ 240VAC
1.62A
0.72A
45A max.
90A max.
0.5W, max. @ 230Vin
OUTPUT SPECIFICATIONS
Voltage and Current
Load Regulation Line Regulation
Ripple/Noise
Hold Up Time
Start Up Time
Over Voltage Protection
Over Current Protection
Transient Response (FL-1/2L)
Temperature Coefficient
AMP6401
See Selection Chart
See Selection Chart
± 0.5%, typ (1% Max.)
0.5% Pk-Pk, typ (1% Max.)
16mS min. at 110VAC Input
1S typ. (2S max.)
112-132%
110-150%
4mS
±0.04%/°C, typ.
Size
Construction
Weight
5.75”L x 2.99”W x 1.69”H
Desktop Style
19.75oz (560g)
ENVIRONMENTAL SPECIFICATIONS
Oper. Temperature
Storage Temperature
Relative Humidity
MTBF: MIL-HDBK-217F
EMI
Efficiency Level
0 to +70°C See Derate Curve
-40 to +85°C *
0 to + 95%, non-cond *
100,000 Hrs. 25°C
220VAC in: CISPR-11B
110VAC in: FCC-18B
V; Most Models, See Selection Chart
OUTPUT DERATING CURVE
GENERAL SPECIFICATIONS
Isolation
Isolation Resistance
Efficiency
Safety
I/P-O/P: 5656VDC (4000VAC)
I/P-GND: 2828VDC (2000VAC)
50MΩ
See Selection Chart
(c)UL60601-1, EN60601-1, IEC60601-1 3td Edition
All specifications are typical at nominal input, full load, and 25°C unless otherwise noted
* These are stress ratings. Exposure of the devices to any of these conditions
may adversely affect long term reliability. Proper operation under conditions
other than the standard operating conditions is neither warranteed nor implied.
WWW.ASTRODYNE.COM
Astrodyne products are not authorized or warranteed for use
as critical components in life support systems, equipment used
in hazardous environments, nuclear controls systems, or other
mission-critical applications.
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
AMP6401
6 3 W M e d i c a l G r ade Desktop Switching Power Adapters
series
MECHANICAL DIMENSIONS
DC Output Connections
DIN (Multi-Output Models)
5 Pin DIN
1
3
4
2
5
1. COM
2. COM
3. Output
4. COM
5. Output
SHIELD = GND
AMP6401-02~03 Output Cord Length 48”, 16AWG, 5 Pin Connector Min.
AMP6401-04~07 Output Cord Length 48”, 16AWG, 2 Pin Connector Min.
AMP6401-08~110 Output Cord Length 72”, 18AWG, 2 Pin Connector Min.
These dimensions are required to meet published Regulation and
Efficiency specifications as well as LPS Efficiency levels. Modifying
these cables will potentially change and/or waive said specifications and
Efficiency levels.
WWW.ASTRODYNE.COM
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458