ASM40 4 0 W U l t r a m i n i a t ure Medical Open Frame Switching Power Supplies series Up to 40W Output Power Universal 90-264VAC Input Single and Dual Outputs from 5VDC to 48VDC High Efficiency up to 86% 4000V Isolation 1U Compatible Height 2”W x 4”L x 1.244”H Model Number Output Voltage Max. O/P Amps Min. O/P Amps Efficiency @ 230VAC R&N P-P Current Limit SINGLE OUTPUT ASM40-5(A)* ASM40-9(A)* ASM40-12(A)* ASM40-15(A)* ASM40-24(A)* ASM40-36(A)* ASM40-48(A)* 5VDC 9VDC 12VDC 15VDC 24VDC 36VDC 48VDC 8 4.44 3.33 2.66 1.66 1.11 0.83 0 0 0 0 0 0 0 73% 82% 84% 84% 86% 85% 86% 100mV 100mV 150mV 150mV 150mV 100mV 400mV 170% 200% 240% 240% 240% 187% 240% DUAL OUTPUT ASM40D-1 ASM40D-2 ASM40D-3 ASM40D-5 (V1/V2) 5/12VDC 5/15VDC 5/24VDC 5/48VDC (I1/I2) 3.3/2 3.3/1.6 3.3/1 3.3/0.50 0.66/0.40 0.66/0.32 0.66/0.20 0.66/0.10 81% 82% 82% 82% 100/120mV 100/150mV 100/240mV 100/400mV 225% 225% 225% 225% *Note: The Single Outputs can be ordered with Molex 09-50-30x1 I/O connectors.. Simply add the suffix “A” to the end of the Model Number. For example, ASM40-5A WWW.ASTRODYNE.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 ASM40 4 0 W U l t r a m i n i a t ure Medical Open Frame Switching Power Supplies INPUT SPECIFICATIONS Input Voltage Range Frequency Range Inrush Current, typ: Leakage Current series GENERAL SPECIFICATIONS 90-264 VAC 47-63 Hz 30A @ 100VAC Input * 60A @ 200VAC Input * <0.1mA OUTPUT SPECIFICATIONS Voltage and Current See Selection Chart Load Regulation (0%-FL) Single O/P: ± 1% Dual O/P (V1/V2): ± 3/5% max Line Regulation (LL-HL) Single O/P: ± 1% max Dual O/P (V1/V2): ± 1/2% max Cross Regulation (Dual Outputs) (100-20% L w. other O/P at 60%) ± 3/5% max Preset Accuracy 1% DC Voltage Adjust (typ) ± 6% of FS (Primary) Temperature Coefficient ± 0.05%/°C Ripple/Noise, 20Mhz BW See Selection Chart measured directly at the pins at nominal load, 25°C ambient, 0.1-uF bypass, peak to peak at 20 MHz bandwidth Over Voltage Protection Latching, 130% max. Current Limit, Self Recovering See Selection Chart * Short Circuit Protection Continuous, self-recovering * Hold Up Time (115V / 60Hz) 10 mS, min. Input-Out Isolation 4000VAC Efficiency See Selection Chart Switching Frequency 65Khz, (fixed, typical) Safety UL/cUL: ANSI/AAMI ES60601-1:2005 UL-EU: EN60601-1 CE: EN60601-1-2 CB: IEC60601-1:2005 (3rd Edition) CSA: CSA-C22.2 No. 601.1-M90 PHYSICAL SPECIFICATIONS Size Construction Weight 2” x 4” x 1.244” 50.8 x 101.6 x 31.6mm Open Frame 7oz (198g) ENVIRONMENTAL SPECIFICATIONS Oper. Temperature Storage Temperature Relative Humidity EMC MTBF -20 to +50°C(FL) , See Derate -40 to +85°C * 0 to + 95%, non-cond * EN 60601-1-2:2001 185,000 Hrs Mil Std 217, 25°C OUTPUT DERATING CURVE 100 90 80 All specifications are typical at nominal input, full load, and 25°C unless otherwise noted * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. Load (%) 70 60 50 40 30 20 Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. 10 0 -20 10 20 30 40 50 60 70 Ambient Temperature DegC WWW.ASTRODYNE.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 ASM40 4 0 W U l t r a m i n i a t ure Medical Open Frame Switching Power Supplies series MECHANICAL DIMENSIONS WITH JST CONNECTORS - STANDARD All 4 corner holes need to be bonded accordingly to the end product PE (Protective Earth) path. 4.00in 101.6mm 3.70in 94mm .15in 3.8mm 2.00in 50.8mm .125in 4_ 3.17mm 3 4 5 6 1.70in 43.2mm ACL 1 ACN 2 +V2out GND GND +V1out .15in 3.8mm 1.17in 29.6mm max C .08in 2mm Length 、Width tolerance : DRAWING NO. ASM60W_C Single Outputs Dual Outputs 1 2 3 4 5 6 AC Line AC Neutral + Output GND GND + Output AC Line AC Neutral + Output 2 GND GND + Output 1 C DESCRIPTION Height changes WWW.ASTRODYNE.COM .063in 1.6mm 0.1mm (0.004in) Pin # REV Input connector : JST/VH series or equivalent Output connector : JST/VH series or equivalent SHEET METAL TOLERANCE (UNLESS OTHERWISE SPECIFIED) UNIT SIZE mm A4 MATERIAL PART NO. Connectors and Mating Connectors 1:1 SCALE ANGULAR PIERCINGBENDING DIMENSION MODEL NO. Input Connector: JST B3P-VH or Molex 41791 Series (3 Position) 2012/05/24 SHEET OF ±0.1 ±0.15 X<8 ±0.3° Input8<X<25 Mating Connector: JST VHR-3N or Molex 3069 Series (3 Position) 2D TITLE ±0.5° Projection ±0.1 ±0.2 Output Connector:±0.15 JST B4P-VH or Molex 41791 DRAWN Series (4 Position) ±0.5° ±0.25 Erica 25<X<100 Output Mating Connector: JST VHR-4N±1° or MolexCHECKED 3069 Series (4 Position) ±0.2 ±0.3 100<X<300 DATE 300<X<800 ±0.3 ±0.5 ±1.5° APPROVED Use with JST # SVH-21T-P1.1 or Molex 2478 Series Crimp Terminals ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 ASM40 4 0 W U l t r a m i n i a t ure Medical Open Frame Switching Power Supplies series MECHANICAL DIMENSIONS WITH MOLEX CONNECTORS (“A” VERSIONS SINGLE OUTPUTS ONLY) All 4 corner holes need to be bonded accordingly to the end product PE (Protective Earth) path. 4.00in 101.6mm 3.70in 94mm .15in 3.8mm 2.00in 1.70in 50.8mm 43.2mm .125in 4_ 3.17mm 3 4 5 6 ACL 1 ACN 2 +Vout +Vout GND GND .15in 3.8mm 1.17in 29.6mm max C .08in 2mm Length 、Width tolerance : C .06in 1.6mm 0.1mm (0.004in) ASM60-A_C DRAWING NO. REV Input connector : Molex 5273 series or equivalent Output connector : Molex 5273 series or equivalent Pin # Single Outputs 1 2 3 4 5 6 AC Line AC Neutral + Output + Output GND GND DESCRIPTION Height changes WWW.ASTRODYNE.COM SHEET METAL TOLERANCE (UNLESS OTHERWISE SPECIFIED) UNIT SIZE mm A4 MATERIAL PART NO. Connectors and Mating Connectors 1:1 SCALE ANGULAR PIERCINGBENDING DIMENSION 2012/05/25Input MODEL NO. Connector: JST B3P-VH or Molex 41791 Series (3 Position) SHEET OF ±0.1 ±0.15 X<8 ±0.3° Input8<X<25 Mating Connector: JST VHR-3N or Molex 3069 Series (3 Position) 2D TITLE ±0.5° Projection ±0.1 ±0.2 Output Connector:±0.15 JST B4P-VH or Molex 41791DRAWN Series (4 Position) ±0.5° Erica ±0.25 25<X<100 Output Mating Connector: JST VHR-4N or Molex 3069 Series (4 Position) ±0.2 ±1° CHECKED ±0.3 100<X<300 DATE 300<X<800 ±0.3 ±0.5 ±1.5° APPROVED Use with JST # SVH-21T-P1.1 or Molex 2478 Series Crimp Terminals 3912 ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458