CTS Series BDN Extruded Heat Sinks ® ADHESIVE PEEL AND STICK HEAT SINKS Technical Data ELECTRONIC COMPONENTS Adhesive Peel and Stick Aluminum Heat Sinks • Pre-applied adhesive − just peel off the release liner and press onto the component • With pre-applied adhesive, just peel • Reduces assembly − noonto more off the release linercosts and press themessy adhesives or greases required component Reduces mechanical assembly costs; ••Excellent bondno more messy adhesives or greases required • Thermally optimized pin fin • Excellent mechanical bond ••Omnidirectional Thermally optimized pin fin Omnidirectional ••Adhesive shear strenght at 100ºC is 36 psi. A inch square sinkatwould 36 lb. of Adhesive shear heat strength 100°Crequire is •one H±0.015 (a remove one inchheat square heat sink would 36psito force sink. require a 36lb. force to remove heat sink) • Applicable for BGA, PGA, PLCC, and QFP Applicable for BGA, PGA, PLCC, •packages W±0.01 L±0.01 P±0.01 G±0.01 T±0.01 and QFP packages HEAT SINK SPECIFICATIONS PIN FIN CONFIGURATION SIZE HEAT SINK PART NUMBER*** (W) (L) 0.91 0.91 1.01 1.01 1.11 1.11 1.21 1.21 1.31 1.31 1.41 1.41 1.51 1.51 1.61 1.61 1.71 1.71 1.81 1.81 BDN19-3CB/A01 1.91 BDN21-3CB/A01 2.11 BDN09-3CB/A01 BDN09-6CB/A01 BDN10-3CB/A01 BDN10-5CB/A01 BDN11-3CB/A01 BDN11-6CB/A01 BDN12-3CB/A01 BDN12-5CB/A01 BDN13-3CB/A01 BDN13-5CB/A01 NOTES: *Thermal resistance of adhesive tape is included. **Thermal resistance values based on power density of 3 watts/in.2 ***Part numbers listed for standard black anodized heat sinks with CTS adhesive tapes. Page 1 of 2 BDN14-3CB/A01 BDN14-6CB/A01 BDN15-3CB/A01 BDN15-5CB/A01 BDN16-3CB/A01 BDN16-6CB/A01 BDN17-3CB/A01 BDN18-3CB/A01 BDN18-6CB/A01 All dimensions are in inches. G FIN MATRIX THERMAL RESISTANCE CASE TO AMBIENT* °C/WATTS FORCED NATURAL CONVECTION CONVECTION** @ 400 LFPM (H) T P .355 .09 .069 .072 7x7 26.9 9.6 .605 .10 .132 .128 4x4 24.5 7.7 .355 .09 .083 .072 7x7 26.4 8.0 .555 .10 .111 .114 5x5 20.8 6.3 .355 .09 .076 .072 8x8 20.9 7.2 .605 .10 .119 .128 5x5 18.5 5.7 .355 .09 .060 .081 9x9 19.6 6.8 .555 .10 .105 .114 6x6 16.5 5.2 .355 .09 .074 .081 9x9 16.1 6.0 .555 .10 .125 .114 6x6 14.9 4.7 .355 .09 .067 .081 10x10 16.2 5.6 .605 .10 .128 .128 6x6 13.1 4.2 .355 .09 .062 .081 11x11 15.1 4.5 .555 .10 .118 .114 7x7 11.9 3.8 .355 .09 .072 .081 11x11 13.5 4.5 .605 .10 .119 .128 7x7 10.6 3.5 .355 .09 .065 .072 13x13 11.5 3.8 .355 .09 .072 .072 13x13 10.8 3.5 .605 .10 .128 .114 8x8 8.1 2.8 1.91 .355 .09 .069 .072 14x14 9.9 2.9 2.11 .355 .09 .064 .072 16x16 8.5 2.6 August 2010 3 Series BDN Forged Heat Sinks Dimensional Information: CTS ® CLIP STYLES MATERIAL: Nylon Plastic per UL94-V0 Component Size Length x Width (mm) 19 21 23 25 27 29 31 33 35 37.5 40 42.5 45 x x x x x x x x x x x x x 0.9mm +/- 0.3mm Short Height Color: Orange 1.7mm +/- 0.3mm Medium Height Color: Blue 3.3mm+/- 0.3mm Tall Height Color: Yellow Part Number 19 21 23 25 27 29 31 33 35 37.5 40 42.5 45 C1919S C2121S C2323S C2525S C2727S C2929S C3131S C3333S C3535S C3838S C4040S C4343S C4545S C1919M C2121M C2323M C2525M C2727M C2929M C3131M C3333M C3535M C3838M C4040M C4343M C4545M Clip Size Length x Width x Height (mm) C1919T C2121T C2323T C2525T C2727T C2929T C3131T C3333T C3535T C3838T C4040T C4343T C4545T Length Case Height 21.2 23.2 25.2 27.2 29.2 31.2 33.2 35.2 37.2 39.7 42.2 44.7 47.2 x x x x x x x x x x x x x 21.2 23.7 25.7 27.7 29.7 31.2 33.7 35.2 37.7 40.2 42.7 45.1 47.7 x x x x x x x x x x x x x 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 Width Height Adhesive Tape Information: TAPE STYLES Supplier Thickness (mm) Thermal Impedance (°C-in.2/W) Dielectric Strength (V/mil) A01 CTS 0.13 0.82 4,000 Double-sided acrylic adhesive on a Kapton® MT carrier T410 Chomerics 0.18 1.10 N/A Double-sided acrylic adhesive loaded with aluminum oxide on an aluminum foil carrier T411 Chomerics 0.28 1.00 N/A Double-sided silicone adhesive with expanded aluminum mesh carrier T412 Chomerics 0.23 0.25 N/A Doubled-sided acrylic adhesive loaded with titanium diboride on an expanded aluminum carrier 8815 3M 0.38 1.20 668 Double-sided acrylic adhesive loaded with ceramic particles Thermal Tape Page 2 of 2 ORDERING INFORMATION Description August 2010