BI-MODAL GREEN & YELLOW LED ARROWS Application: Typically used in left turn control applications, Dialight LED Bimodal arrow provides both a yellow and a green arrow from a single module. This space savings provides the ability to display two distinct indications with only the need for one additional traffic signal head. In using less signal heads it provide the ability to maintain minimum signal to ground vehicle clearance heights keeping the signal in a better field of view. Electrical specifications Operating Voltage: 80V AC to 135V AC (120V AC nominal) Power Consumption: 6W/7W Operating Temp: -40°C to +74°C Features & Benefits • 5 year full performance warranty • 90% reduction in power vs. incandescent Noise Requirements/ • Long life; up to 10 times longer than incandescent • Hard coated lenses for abrasion resistance EMC: FCC Title 47, Subpart B, Section 15, class A device. RF Immunity; 10V/m, 80MHz-1GHz Surge Protection: 1 kV line to line 2 kV line to ground THD: <20% Power Factor: > 0.9 • Easy to install into existing signal enclosure • Convex lens reduces glare & sun reflection • Fuse and transient suppressor incorporated for line and load protection All values typical unless otherwise state • Turn-On/Turn-Off Time = 75 msec max • Conforms to MIL-STD-810F for blowing rain • All products traceable by serial number Ordering Codes: Part Number Description 430-6370-001 Bi-Modal Green/Yellow CSA Approved Lens Type Typical Wattage at 25oC Dominant Wavelength (nm) • Clear 6/7 505/590 Dialight reserves the right to make changes at any time in order to supply the best product possible. The most current version of this document will always be available at: www.dialight.com/Assets/Brochures_And_Catalogs/Signaling/MDTSBMARW001.pdf www.dialight.com MDTSBMARW001_C