FEATURES / BENEFITS IntelliLED® Hi-Flux LED Traffic Signal Modules The signal's intelligence is constantly monitoring all of the critical parameters that contribute to degradation of LED intensity such as temperature, drive current and the number of hours of operation. When the IntelliLED® signal reaches a point that it can no longer maintain the required intensity, it will give a subtle but clear TTC (Time-to-Change) visual indication by the way it turns on. To address the "Green Glare" issue, IntelliLED® signals offer dimming that is fully compatible to "Phase Cut" dimming used with conventional incandescent NEMA TS1 & TS2 controllers. Utilizes Hi-Flux technology to achieve a very uniform appearance, similar to but better than the incandescent signals they replace. Consumes up to 40% less power than conventional LED signals, and over 90% less power than incandescent signals. Long life; Up to 10 times longer than incandescent signals. SPECIFICATIONS Operating Voltage Range: 80VAC to 135VAC (120VAC nominal) Convex tinted lens reduces glare & sun reflection Fuse and transient suppressor incorporated for line and load protection Operating Temperature Range: -40°C to +74°C Turn-On/Turn-Off Time = 75 msec max Power Factor > 0.9 Total Harmonic Distortion < 20% Meets ITE VTCSH-2 Specification Meets FCC Title 47, Subpart B, Section 15 Regulations for electrical noise Conforms to MIL-STD-810F for blowing rain Provided with quick connect terminals and spade adapters Written manufacturer’s warranty available upon request All products traceable by serial number Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com MDTSMODJ001_E IntelliLED® Hi-Flux LED Traffic Signal Modules 12” (300mm) SIGNALS Part Number Color 433-1210-401 Red 433-2220-601 Green 433-2270-601 Green 435-1210-401 Red 435-2220-601 Green 435-2270-601 Green Dimming TTC* Expanded View Lens Type Initial Typical Wattage at 25°C Dim Mode Typical Wattage at 25°C Dominant Wavelength (nm) Tinted 5 N/A 622 Tinted 13 5 505 Clear 13 5 505 Tinted 6 N/A 622 Tinted 16 6 505 Clear 16 6 505 * TTC = Time-to-Change The signal’s intelligence reduces power consumption up to 40% over conventional LED signals by maintaining the optimum drive characteristics, and by enabling nighttime dimming of the green signals. Typical Power Comparisons in Watts (@ 25°C) Color Duty Cycle Traditional LED Signal IntelliLEDTM Signal Red 55% 11 5 Yellow 5% 20 12 Green 40% 12 12* 12 8* Weighted Average * Assumes Green Dimming for 8 hours per day NOTE: Yellow power values are for calculation purposes. The IntelliLED® signal is currently available in Red and Green. Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com MDTSMODJ001_E