HEXAGONE Industrial Power for Business-Critical Continuity™ DC Back-up Power System Hexagone is a battery charger dedicated to protect DC critical industrial equipments and processes from the damaging effects of power interruptions and losses. Benefits ■ ■ ■ Shorten lead time to meet project schedules Easy parameter settings for quick on-site adjustments Easy maintenance via direct access to components from front to reduce MTTR Key Features ■ High reliability provided by a fully controlled 6-pulse SCR bridge and a reduced quantity of components Low Ripple Voltage to enhance battery life Low inrush current < 8In not to oversize mains power supply ■ Human-Machine Interface (HMI) choice to deliver the user with appropriate information level ■ Fault prediction to anticipate potential failures ■ Ingress protection up to IP55 for harsh environmental conditions ■ Compatibility with Nickel-Cadmium and Lead batteries, open or gas-recombination types ■ Galvanic isolation between input and output ■ Digital control and monitoring ■ A wide choice of configurations and options ■ ■ Applications Hexagone suits all DC applications requiring a large battery back-up: ■ Power Transmission and Distribution ■ Continuous process industries ■ Petrochemical and Chemical industries ■ Water treatment ■ Marine ■ Military Hexagone is available as standard from 35A to 400A in a wide range of output voltages, from 24 Vdc to 220 Vdc. It is suitable for use either as a battery charger, rectifier or as a DC power supply. Hexagone features a microprocessor control which offers exceptional stability and allows adaptability for different application requirements. In order to improve load availability and process reliability, Hexagone is able to operate in dual parallel configuration. HEXAGONE Industrial Power for Business-Critical Continuity™ DC Back-up Power System Ratings (A) 24 VDC output voltage 48 VDC output voltage 110 / 125 VDC output voltage 220 VDC output voltage 35 ✓ ✓ 65 100 160 220 300 400 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ This publication is issued to provide outline information only and is not deemed to form any part of any offer and/or contract. The company has a policy of continuous product development and improvement, and we therefore reserve the right to vary any information without prior notice. Hexagone-DSUK-Rev0-06/2011 Technical Specification Input Three-phase voltage / tolerance Frequency range Inrush current Power factor 380 - 400 - 415 / +/-10% (other voltage on request) From 47 to 63 Hz < 8In 0.8 Output Nominal DC voltage Available ratings Static regulation Ripple voltage (disconnected battery) Float voltage Charge voltage Equalization voltage 24, 48, 110, 125, 220 VDC (other upon request) See table above 0.5% < 0.7% From 0.70 Un to 1.47 Un From 0.73 Un to 1.60 Un From 0.83 Un to 1.70 Un Battery Type Autonomy Lead Acid or Nickel Cadmium, vented or recombination type From few minutes to several hours, as per customer's requirement General data AC/DC efficiency Operating temperature Storage temperature Relative humidity Operating altitude Cooling External ingress protection Noise Input / output isolation Frame colour Dimensions From 83% to 94% (according to model) From 0 to 45°C From -20 to +70°C (battery excluded) < 95% non condensing at 20°C 1000m (without system derating) Fan-assisted IP 20 < 60 dB 2500 VAC / 1 minute RAL 7035 Varying according to ratings and options (please consult us) Options Charger Battery Mechanical Load Coupling diode Dropping diode DC earth fault monitor Ultra low ripple voltage < 0.1% Isolated communication interface, RS 485, Modbus protocol Front panel LEDs status annunciator Protection against battery reversed polarity Battery Low Voltage Disconnect (LVD) Integrated batteries (on shelves or drawers) Temperature sensor for battery charge compensation External ingress protection IP21, 23, 41, 43, 55 Natural cooling Space heater Input / output terminal wiring Internal protection against electric contacts with open door Internal lighting, lifting eyes Distribution board (circuit breaker with or without contact) Standards Compliance Emerson Network Power. The global leader in enabling Business-Critical Continuity™. EMC n°2004/108/CE - NF EN 61000-6-2 - NF EN 61000-6-4 LVD n°2006/95/CE - NF EN 60439-1 NFC 58-311 IEC 60146 ■ AC Power ■ Connectivity ■ DC Power ■ Embedded Computing Emerson Network Power Chloride France S.A. 30 avenue Montgolfier - BP90 - 69684 Chassieu Cedex France T +33 (0) 4 78 40 13 56 - F +33 (0) 4 78 90 58 90 E [email protected] EmersonNetworkPower.com ■ Embedded Power ■ Industrial Power ■ Infrastructure Management & Monitoring ■ Outside Plant ■ Power Switching & Controls ■ Precision Cooling ■ Racks & Integrated Cabinets ■ Services Emerson, Business-Critical Continuity and Emerson Network Power are trademarks of Emerson Electric Co. or one of its affiliated companies. ©2011 Emerson Electric Co. E-0000 000