AZ DISPLAYS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY CUSTOMER APPROVAL ※ PART NO. : APPROVAL ATM0350D6(AZDISPLAYS) VER1.0 COMPANY CHOP CUSTOMER COMMENTS AZ DISPLAYS ENGINEERING APPROVAL DESIGNED BY CHECKED BY APPROVED BY ATM0350D6(AZ DISPLAYS) TFT MODULE VER1.0 Record of Revision Version Revise Date V1.0 2010-06-21 AZ DISPLAYS Page Content First issued 2 ATM0350D6(AZ DISPLAYS) TFT MODULE VER1.0 Table of Contents Record of Revision............................................................................................................................ 2 1. General Specifications ............................................................................................................... 4 2. Input/Output Terminals ............................................................................................................... 5 3 Absolute Maximum Ratings ....................................................................................................... 8 4 Electrical Characteristics............................................................................................................ 8 5 Timing Chart............................................................................................................................. 10 6 Optical Characteristics ............................................................................................................. 16 7 Environmental / Reliability Tests............................................................................................... 20 8 Mechanical Drawing................................................................................................................. 21 9 Packing Drawing ...................................................................................................................... 22 10 Precautions For Use of LCD modules...................................................................................... 24 AZ DISPLAYS 3 ATM0350D6(AZ DISPLAYS) TFT MODULE VER1.0 1. General Specifications Feature Size Resolution Interface Display Spec. 3.5inch 320(RGB) X 240 RGB/CCIR656/601 Color Depth 24bit Technology type a-Si Pixel pitch (mm) 0.219 x 0.219 Display colors Pixel Configuration Display Mode Mechanical Characteristics Spec 16.7M Dithering R.G.B. Vertical Stripe TM with Normally White Surface Treatment Clear Type. 3H Viewing Direction 12 o’clock Gray Scale Inversion Direction 6 o’clock LCM (W x H x D) (mm) 76.9*63.9*3.15 Active Area(mm) 70.08 x 52.56 With /Without TSP Without TSP Weight (g) LED Numbers Driver IC 29.3 6 LEDs Seril Novatek NT39016D Note 1: Viewing direction for best image quality is different from TFT definition, there is a 180 degree shift. Note 2: Requirements on Environmental Protection: RoHS Note 3: LCM weight tolerance: ± 5% AZ DISPLAYS 4 ATM0350D6(AZ DISPLAYS) TFT MODULE VER1.0 2. Input/Output Terminals 2.1 TFT LCD Panel Matching connector of Kyocera elco: 6240 serials No Symbol I/O/P Description 1 LED_Cathode P LED_Cathode 2 LED_Cathode P LED_Cathode 3 LED_Anode P LED_Anode 4 LED_Anode P LED_Anode Remarks Note2-1 5 NC - No Connect 6 NC - No Connect 7 NC - No Connect 8 RESET I Reset 9 SPENA I Serial port data enable signal 10 SPCK I SPI Serial Clock 11 SPDA 12 D00 I Data 00 Note 2-2 13 D01 I Data 01 Note 2-2 14 D02 I Data 02 Note 2-2 15 D03 I Data 03 Note 2-2 16 D04 I Data 04 Note 2-2 17 D05 I Data 05 Note 2-2 18 D06 I Data 06 Note 2-2 19 D07 I Data 07 Note 2-2 20 D08 I Data 08 Note 2-2 21 D09 I Data 09 Note 2-2 22 D10 I Data 10 Note 2-2 23 D11 I Data 11 Note 2-2 24 D12 I Data 12 Note 2-2 25 D13 I Data 13 Note 2-2 26 D14 I Data 14 Note 2-2 27 D15 I Data 15 Note 2-2 28 D16 I Data 16 Note 2-2 AZ DISPLAYS I/O SPI Serial Data Input/output 5 ATM0350D6(AZ DISPLAYS) TFT MODULE VER1.0 29 D17 I Data 17 Note 2-2 30 D18 I Data 18 Note 2-2 31 D19 I Data 19 Note 2-2 32 D20 I Data 20 Note 2-2 33 D21 I Data 21 Note 2-2 34 D22 I Data 22 Note 2-2 35 D23 I Data 23 Note 2-2 36 HSYNC I Horizontal Synchronous Signal 37 VSYNC I Vertical Synchronous Signal 38 CLK I Data Clock 39 NC - No Connect 40 NC - No Connect 41 VDD P power supply（3.3V） 42 VDD P power supply（3.3V） 43 NC - No Connect 44 NC - No Connect 45 NC - No Connect 46 NC - No Connect 47 NC - No Connect 48 NC - No Connect 49 NC - No Connect 50 NC - No Connect 51 NC - No Connect 52 DEN I Data enabling signal 53 GND P Ground 54 GND P Ground Note2-1: I/O definition: I----Input O----Output AZ DISPLAYS P----Power/Ground 6 ATM0350D6(AZ DISPLAYS) TFT MODULE VER1.0 Note2-2: Mode D(23:16) D(15:08) D(07:00) HSYNC VSYNC ITU-R BT 656 D(23:16) GND GND NC NC NC ITU-R BT 601 D(23:16) GND GND HSYNC VSYNC NC 8 Bit RGB D(23:16) GND GND HSYNC VSYNC 24 Bit RGB R(7:0) G(7:0) B(7:0) HSYNC VSYNC AZ DISPLAYS DEN NC for HV Mode DEN for Den Mode NC for HV Mode DEN for Den Mode 7 ATM0350D6(AZ DISPLAYS) TFT MODULE VER1.0 3 Absolute Maximum Ratings 3.1 Driving TFT LCD Panel Ta = 25℃ Item Supply Voltage Operating Temperature Storage Temperature Symbol VDD TOPR TSTG MIN -0.3 -20 -30 MAX 5.0 60 70 Unit V ℃ ℃ Remark 4 Electrical Characteristics 4.1 Driving TFT LCD Panel Item Supply Voltage Low Level Input Signal Voltage High Level Power Consumption (Panel+LSI) 4.2 GND=0V, Ta=25℃ Symbol VDD VIL VIH Full Mode (60HZ) Stand-by Mode MIN 3.0 GND 0.7* VDD TYP 3.3 - MAX 3.6 0.3* VDD VDD Unit V V V - 35 50 mW - 0.12 0.17 mW Remark Driving Backlight Ta=25℃ Item Symbol Forward Current IF Forward Current Voltage VF Backlight Power Consumption WBL MIN -16.8 -- TYP 20 19.2 384 MAX 25 21.6 510 Unit mA V mW Remark Note 1: The figure below shows the connection of backlight LED. LED_Anode LED_Cathode Note 2: Each LED : IF =20 mA, V =3.2V Note 3: The minimal life of LED : 20,000 hours AZ DISPLAYS 8 ATM0350D6(AZ DISPLAYS) TFT MODULE VER1.0 4.3 Block Diagram LCD PANEL D00~D23, HSYNC, VSYNC CLK，DEN Source+ Gate Driver Grayscale Manipulation Voltage Charge pump SPENA, SPCK, SPDA RESET VDD VCOM FPC TCON RGB ITU-R BT 601/656 SPI Signal RESET Signal POWER SUPPLY LCD Driver Chip (COG) B/L AZ DISPLAYS LED_Anode, LED_Cathode B/L 9 ATM0350D6(AZ DISPLAYS) TFT MODULE VER1.0 5 Timing Chart 5.1 Timing Parameter 5.1.1 AC Electrical Characteristics (VDD=3.3V, GND= 0V,Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Conditions CLK clock time Tclk 35.7 ns CLK=28MHz CLK pulse duty Tchw 40 50 60 % HSYNC to CLK Thc - - 1 CLK HSYNC width Thwh 1 - - CLK VSYNC width Tvwh 1 - - Th HSYNC period time Th 60 63.56 67 us VSYNC setup time Tvst 12 - - ns VSYNC hold time Tvhd 12 - - ns HSYNC setup time Thst 12 - - ns HSYNC hold time Thhd 12 - - ns Data set-up time Tdsu 12 - - ns D[23:00] to CLK Data hold time Tdhd 12 - - ns D[23:00] to CLK DEN setup time Tesd 12 - - ns DEN to CLK AZ DISPLAYS Tclk 10 ATM0350D6(AZ DISPLAYS) TFT MODULE VER1.0 5.2 24 bit RGB mode for 320RGB x 240 Parameter Symbol Min. Typ. Max. Unit Conditions CLK frequency CLK cycle time Time that HSYNC to 1’st data input(NTSC) Fclk Tclk - 6.4 156 - MHz ns VDD=3.0~3.6V Ths 40 70 255 CLK VSYNC HSYNC 1 2 13 14 253 254 1 2 Default=13 lines Display lines = 240 lines Total lines = 263 lines HSYNC CLK 1 2 70 71 Default Ths = 70 D23~D16 R R R R R R R R D15~D08 G G G G G G G G D07~D00 B B B B B B B B DEN Active Area = 320RGB Total Area = 408 CLK AZ DISPLAYS 11 ATM0350D6(AZ DISPLAYS) TFT MODULE VER1.0 5.3 5.4 8 bit RGB mode for 320RGB x 240 Parameter Symbol Min. Typ. Max. Unit Conditions CLK frequency CLK cycle time Time that HSYNC to 1’st data input(NTSC) Fclk Tclk - 27 37 - MHz ns VDD=3.0~3.6V Ths 35 70 255 CLK Parameter Symbol Min. Typ. Max. Unit Conditions CLK frequency CLK cycle time Time that HSYNC to 1’st data input(PAL) Time that HSYNC to 1’st data input(NTSC) Fclk Tclk - 24.54/27 40/37 - MHz ns VDD=3.0~3.6V Ths 128 264 - CLK Ths 128 244 - CLK ITU-R BT 601 AZ DISPLAYS 12 ATM0350D6(AZ DISPLAYS) TFT MODULE VER1.0 5.5 ITU-R BT 656 Parameter Symbol Min. Typ. Max. Unit Conditions CLK frequency CLK cycle time Time that EVA to 1’st data input(PAL) Time that EVA to 1’st data input(NTSC) Fclk Tclk - 27 37 - MHz ns VDD=3.0~3.6V Ths 128 288 - CLK Ths 128 276 - CLK Typ. 50 - Max. 60 - Unit ns % ns ns ns us 5.6 3-wire serial communication AC timing Parameter Serial clock SPCK pulse duty Serial data setup time Serial data hold time Serial clock high/low Chip select distinguish AZ DISPLAYS Symbol Min. Tspck 320 Tscdut 40 Tisu 120 Tihd 120 Tssw 120 Tcd 1 Conditions 13 ATM0350D6(AZ DISPLAYS) TFT MODULE VER1.0 5.7 3-Wire Control Registers List 3-Wire Register Register Description D[15:8] Name Init R/W Function Description 000000b 000001b 000010b 000011b 000100b 000101b 000110b 000111b 001000b 001001b 001010b 001011b 001100b 001101b 001110b 001111b 010000b 010001b 010010b 011110b R00 R01 R02 R03 R04 R05 R06 R07 R08 R09 R0A R0B R0C R0D R0E R0F R10 R11 R12 R1E 07h 00h 03h CCh 46h 0Dh 00h 00h 08h 40h 88h 88h 20h 20h 68h A4h 04h 24h 24h 00h R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W 100000b R20 00h R/W System control register Timing Controller function register Operation control register Input data Format control register Source Timing delay control register Gate Timing delay control register Reserved Internal function control register RGB Contrast control register RGB Brightness control register Hue / Saturation control register R / B Sub-Contrast control register R Sub-Brightness control register B Sub-Brightness control register VCOMDC Level Control Register VCOMAC Level Control Register VGAM2 level control register VGAM3/4 level control register VGAM5/6 level control register VCOMDC Trim function control register Wide and narrow display mode control register Note : R03: c4h:ITU-R BT 656 Mode c2h:ITU-R BT 601 Mode c8h:8 bit RGB Mode(HV Mode) c9h:8 bit RGB Mode(DE Mode) cch(default):24 bit RGB Mode (HV mode) cdh:24 bit RGB Mode (DE mode) AZ DISPLAYS 14 ATM0350D6(AZ DISPLAYS) TFT MODULE VER1.0 5.8 5.9 power on sequence power off sequence AZ DISPLAYS 15 ATM0350D6(AZ DISPLAYS) TFT MODULE VER1.0 6 Optical Characteristics 6.1 Optical Specification Ta=25℃ Item Symbol Condition Min Typ. Max. 30 40 - 50 60 - 50 60 - 50 60 - θ=0° 200 350 - 25℃ - 25 40 x 0.260 0.310 0.360 y 0.283 0.333 0.383 x 0.574 0.624 0.674 0.318 0.368 0.418 0.300 0.350 0.400 y 0.500 0.550 0.600 x 0.093 0.143 0.193 y 0.069 0.119 0.169 U 75 80 - % Note1 Note6 - 50 - % Note 5 240 300 - cd/m2 Note1 Note7 θT View Angles θB θL CR≧10 θR Contrast Ratio Response Time White RED Chromaticity GREEN BLUE Uniformity CR TON TOFF y x Backlight is on NTSC Luminance L Unit Remark Degree Note 2 Note1 Note3 ms Note1 Note4 Note5, Note1 Test Conditions: 1. VF =19.2V, IF =20mA(LED current), the ambient temperature is 25℃. 2. The test systems refer to Note 1 and Note2. AZ DISPLAYS 16 ATM0350D6(AZ DISPLAYS) TFT MODULE VER1.0 Note 1: Definition of optical measurement system. The optical characteristics should be measured in dark room. After 5 minutes operation, the optical properties are measured at the center point of the LCD screen. All input terminals LCD panel must be ground when measuring the center area of the panel. Photo detector Field 500mm TFT-LCD Module LCD Panel Item Photo detector Field SR-3A 1° BM-7A 2° Contrast Ratio Luminance The center of the screen Chromaticity Lum Uniformity Response Time Note 2: Definition of viewing angle range and measurement system. viewing angle is measured at the center point of the LCD by CONOSCOPE(ergo-80)。 Fig. 1 Definition of viewing angle AZ DISPLAYS 17 ATM0350D6(AZ DISPLAYS) TFT MODULE VER1.0 Note 3: Definition of contrast ratio “White state “:The state is that the LCD should driven by Vwhite. “Black state”: The state is that the LCD should driven by Vblack. Vwhite: To be determined Vblack: To be determined. Note 4: Definition of Response time The response time is defined as the LCD optical switching time interval between “White” state and “Black” state. Rise time (TON) is the time between photo detector output intensity changed from 90% to 10%. And fall time (TOFF) is the time between photo detector output intensity changed from 10% to 90%. Note 5: Definition of color chromaticity (CIE1931) Color coordinates measured at center point of LCD. AZ DISPLAYS 18 ATM0350D6(AZ DISPLAYS) TFT MODULE VER1.0 Note 6: Definition of Luminance Uniformity Active area is divided into 9 measuring areas (Refer Fig. 2). Every measuring point is placed at the center of each measuring area. Luminance Uniformity(U) = Lmin/ Lmax L-------Active area length W----- Active area width Fig. 2 Definition of uniformity Lmax: The measured maximum luminance of all measurement position. Lmin: The measured minimum luminance of all measurement position. Note 7: Definition of Luminance : Measure the luminance of white state at center point. AZ DISPLAYS 19 ATM0350D6(AZ DISPLAYS) TFT MODULE VER1.0 7 Environmental / Reliability Tests No 1 2 3 4 5 6 Test Item High Temperature Operation Low Temperature Operation High Temperature Storage Low Temperature Storage High Temperature & High Humidity Storage Condition Remarks Ts=+60℃,240hrs Note1 IEC60068-2-2,GB2423.2—89 Ta=-20℃,240hrs Note 2, IEC60068-2-1 GB2423.1—89 Ta=+70℃,240hrs IEC60068-2-2, GB2423.2—89 Ta=-30℃,240hrs IEC60068-2-1 GB2423.1—89 +60℃,90% RH max,160 hours IEC60068-2-3, GB/T2423.3—2006 Thermal Shock -30℃ 30 min~+70℃ 30 min, (Non-operation) Change time:5min,30 Cycle. Start with cold temperature, end with high temperature IEC60068-2-14,GB2423.22—87 C=150pF, R=330Ω，5points/panel Air:±8KV,5times;Contact:±4KV,5times; IEC61000-4-2 7 （ Environment:15℃ ～ 35℃,30% ～ GB/T17626.2—1998 60%,86Kpa～106Kpa） Frequency range:10~55Hz,Stroke:1.5mm IEC60068-2-6 Vibration 8 (Non-operation) Sweep:10Hz~55Hz~10Hz 2 hours for each GB/T2423.10—1995 direction of X.Y.Z.(package condition) Shock 60G 6ms, ± X,± Y,± Z 3times for each IEC60068-2-27 9 (Non-operation) direction GB/T2423.5—1995 Package IEC60068-2-32 10 Height:80 cm,1 corner, 3 edges, 6 surfaces Drop Test GB/T2423.8—1995 Electro Static Discharge (Operation) Note1: Ts is the temperature of panel’s surface. Note2: Ta is the ambient temperature of sample. AZ DISPLAYS 20 ATM0350D6(AZ DISPLAYS) TFT MODULE VER1.0 AZ DISPLAYS 21 ATM0350D6(AZ DISPLAYS) TFT MODULE VER1.0 9 Packing drawing LCM quantity per Partition: 3rows x 28 pcs = 84 pcs Total quantity in carton: 2 layers x 84 pcs per partition= 168 pc LCM 浦 海 上 国 :中 01 硊 12 華 20 ： 编 邮 新 东 区 龙 大 东 Anti_Static_Bag 号 01 61 道 2*3tier*5tie 5 Carton/168p 6 4 硊 華 :中 邮 编 国 海 上 20 ： 12 浦 东 区 新 龙 大 东 01 AZ DISPLAYS 61 道 01 号 7 22 ATM0350D6(AZ DISPLAYS) TFT MODULE VER1.0 Per carton: No Item Model (Material) 1 LCM module ATM0350D6 2 Partition_1 3. Anti-Static Bag 4 Dust-Proof Bag 5 Partition_2 6 Corrugated Paper Dimensions(mm) 76.90 x 63.90 x 3.15 Unit Weight(Kg) 0.03 Quantity 168 513*333*106 0.782 2 PE 155*85*0.05 0.003 168 PE -------------------- 0.060 1 Corrugated Paper 505*332*4.00 0.095 3 Corrugated Bar Corrugated Paper 513*117*4 0.032 12 7 Carton Corrugated Paper 530*350*250 1.1000 1 8 Total weight AZ DISPLAYS Remark Anti-static 8.937±5% 23 ATM0350D6(AZ DISPLAYS) TFT MODULE VER1.0 10 Precautions For Use of LCD modules 10.1 Handling Precautions 10.1.1. The display panel is made of glass. Do not subject it to a mechanical shock by dropping it from a high place, etc. 10.1.2. If the display panel is damaged and the liquid crystal substance inside it leaks out, be sure not to get any in your mouth, if the substance comes into contact with your skin or clothes, promptly wash it off using soap and water. 10.1.3. Do not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to vary. 10.1.4. The polarizer covering the display surface of the LCD module is soft and easily scratched. Handle this polarizer carefully. 10.1.5. If the display surface is contaminated, breathe on the surface and gently wipe it with a soft dry cloth. If still not completely clear, moisten cloth with one of the following solvents: － Isopropyl alcohol － Ethyl alcohol Solvents other than those mentioned above may damage the polarizer. Especially, do not use the following: － Water － Ketone － Aromatic solvents 10.1.6. Do not attempt to disassemble the LCD Module. 10.1.7. If the logic circuit power is off, do not apply the input signals. 10.1.8. To prevent destruction of the elements by static electricity, be careful to maintain an optimum work environment. 10.1.8.1. Be sure to ground the body when handling the LCD Modules. 10.1.8.2. Tools required for assembly, such as soldering irons, must be properly ground. 10.1.8.3. To reduce the amount of static electricity generated, do not conduct assembly and other work under dry conditions. 10.1.8.4. The LCD Module is coated with a film to protect the display surface. Be care when peeling off this protective film since static electricity may be generated. 10.2 Storage Precautions 10.2.1. When storing the LCD modules, avoid exposure to direct sunlight or to the light of fluorescent lamps. 10.2.2. The LCD modules should be stored under the storage temperature range. If the LCD modules will be stored for a long time, the recommend condition is: Temperature : 0℃ ～ 40℃ Relatively humidity: ≤80% 10.2.3. The LCD modules should be stored in the room without acid, alkali and harmful gas. 10.3 Transportation Precautions The LCD modules should be no falling and violent shocking during transportation, and also should avoid excessive press, water, damp and sunshine. AZ DISPLAYS 24