LITEMAX DLF/DLH0835 V2 Sunlight Readable 8.4” LED B/L LCD User Manual (1st Edition 2012/3/23) All information is subject to change without notice. Approved by Checked by FOR MORE INFORMATION: Prepared by AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA 92656 PHONE: (949) 360 5830 E-MAIL: [email protected] Website: www.azdisplays.com Page 1 RECORD OF REVISION Version and Date Mar,23,2012 Page Old Description all New Description Initial Release Page 2 Remark Contents RECORD OF REVISION .................................................................................................. 2 Contents........................................................................................................................... 3 1.0 GENERAL DESCRIPTION ......................................................................................... 4 2.0 Input Terminals.......................................................................................................... 6 3.0 Electrical Characteristics ......................................................................................... 9 4.0 TIMING Characteristics of Input Signals ................................................................11 5.0 Input Signals, Basic Display Colors and Gray Scale of Each Color ................... 12 6.0 OPTICAL SPECIFICATION...................................................................................... 13 7.0 LED DRIVING BOARD SPECIFICATIONS .............................................................. 16 8.0 AD5621GD SPECIFICATION (DLH0835 V2 Only) .................................................. 19 General Description ...................................................................................................... 19 Supported Timing (*by your panel resolution) ........................................................... 20 Outline Dimensions ...................................................................................................... 22 Pin Define ................................................................................................................ 23 CN1: Panel connector ...................................................................................... 24 CN2: DVI-D Input connector ............................................................................. 24 CN3: DVI-D Input connector(16pin connector) ................................................. 25 CN4: Analog RGB Input connector(D-SUB 15Pin) ........................................... 25 CN5: Analog RGB Input connector(13pin connector) ....................................... 25 J1: Power DIN Jack(12V).................................................................................. 26 J2: Power connector(12V) ................................................................................ 26 J3: Power connector(5V) .................................................................................. 26 J4: Inverter Connector ...................................................................................... 26 J5,J6: FAN ........................................................................................................ 26 J7: Key Pad ...................................................................................................... 26 J8: TO Audio PCB connector(Audio control) .................................................... 27 J9: Ambient ....................................................................................................... 27 J10: VR connector ............................................................................................ 27 J11: G-PROBE(RS232)..................................................................................... 27 JP1:PANEL VCC............................................................................................... 27 DC characteristics............................................................................................. 27 OSD menu...................................................................................................................... 28 9.0 MECHANICAL DRAWING........................................................................................ 34 10.0 PRECAUTIONS ...................................................................................................... 35 Page 3 1.0 GENERAL DESCRIPTION DLF/DLH0835 V2 is a replaced model of DLF/DLH0835 V1. It is a color TFT-LCD Display as active switching devices with 1,000nits LED backlight powered by Durapixel™ technology. This LCD display has a 8.4 inch diagonally measured active area with SVGA resolutions (800 horizontal by 600 vertical pixel array). Each pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical stripe and this module can display 16.2M colors. 1.1 FEATURES Sunlight Readable LED Backlight High Shock & Vibration Resistance Low Power Consumption High Uniformity Low EMI Noise Wide Dimming Life Expectancy Operation Temperature 1.2 GENERAL SPECIFICATIONS Model No. DLF0835 V2 Description Display Area (mm) Brightness Resolution Contrast Ratio Pixel Pitch (mm) Viewing Angle Display Colors Response Time (Typical) Sync Power Consumption Dimensions (mm) Weight (Net) 8.4” TFT LCD, LED Backlight 1000 nits, SVGA 170.4(H) x 127.8(V) 1000 cd/m2 SVGA (800 x 600) 450 : 1 0.213 x 0.213 130°(H), 120°(V) 16.2M / 262K 35 ms LVDS W 199.5(W) x 154(H) x 12.45(D) 0.33Kg DLH0835 V2 1.3 Difference of V1 & V2 Model Bezel Opening Outline Dimension View Angle Response Color Time Contrast Ratio LID Dimension DLF0835 V1 175.5x133 199.5x149.5x11.6 120°(H)~120°(V) 30ms 16.2M 600:1 124x50x15 DLF0835 V2 173.4x130.8 199.5x154x11.6 130°(H)~120°(V) 35ms 262K/16.2M 450:1 70x30x7 Page 4 1.4 ABSOLUTE MAXIMUM RATINGS Page 5 2.0 Input Terminals Page 6 Page 7 Page 8 3.0 Electrical Characteristics Page 9 Page 10 4.0 TIMING Characteristics of Input Signals Page 11 5.0 Input Signals, Basic Display Colors and Gray Scale of Each Color Page 12 6.0 OPTICAL SPECIFICATION Optical Item Red Color chromaticity Data Unit Rx 0.5655 - Ry 0.3286 - Gx 0.3496 - Gy 0.6036 - Symbol Green Condition Bx θx=0 0.1492 - By θy=0 0.1196 - Wx BM-7 0.3041 - Wy 0.3453 - Center Luminance of White Lc 1000 cd/㎡ Average La 997 cd/㎡ Uniform Lu 80 ％ Contrast Ratio CR 450 : 1 - 54.33 ％ Blue White Color Saturation Viewing Angle NTSC Horizontal Vertical θx=0 θy=0 Klein K-10 θx+ θxθy+ Note Test Mode： （1） （2） （3） Test Mode： （1） （4） 65 CR≧10 θy- 65 60 55 Page 13 Deg Test Mode： （1） （3） Test Mode： （1） Definition of Viewing Angle（θx，θy）： （2） Definition of Test Point： A B C 1 2 3 Active Area Page 14 （3）BM-7 Measurement Setup: （4）Klein K-10 Measurement Setup: Page 15 7.0 LED DRIVING BOARD SPECIFICATIONS 1. LED Application This specification is applied to LED converter unit for DLF/DLH0835 V2(1000nit) LED backlight 2. Operating Characteristics Item Symbol MIN. TYP. MAX. Unit Remark Conditions Input Voltage Vin Input Current (Low Brightness) VIN=12V,Vadj=5V IinL Input Current (High Brightness) 10.0 12.0 14.0 3 ‐‐‐‐‐ ‐‐‐‐‐ 0.456 0.377 0.319 0.0 ‐‐‐‐‐ ‐‐‐‐‐ 0.172 0.172 0.172 VIN=12V,Vadj=5V IoutL LED Current VIN=12V,Vadj=0V 200 220 HZ 0.5 ‐‐‐‐‐ 4.8 2 ‐‐‐‐‐ 5 24.172 24.136 24.121 V 91.75 91.76 92.90 523 550 PWM Frequency Brightness Control Freq VIN=12V 180 Efficiency Vout η Normal Operation VIN=12V,Vadj=0V VIN=12V,Vadj=0V Page 16 Arms KHz VIN=12V,Vadj=0V Von/off 580 Freq Connection of Voltage A Working Frequency Output Voltage A IoutH Vadj mA (High Brightness) ON/OFF Control V VIN=12V,Vadj=0V IinH LED Current (Low Brightness) V V ％ Vadj±5% 3. Connector Socket 3‐1. Input Connector: J3(JST S 8B‐PH‐SM3‐TB or Compatible PIN No Symbol Description 1 Vin DC+12V 2 Vin DC+12V 3 Vin DC+12V 4 GND Ground 5 GND Ground 6 GND Ground 7 Brightness Brightness Control 5V~0V 8 Control ON/OFF Control 0.8V(OFF) 2~5V(ON) 3‐2 .Output Connector: J1,J2(JST S 2B‐ZR‐SM3A‐TF or Compatible) PIN NO Symbol Description 1 Output LED High Voltage( + ) 2 Output LED Low Voltage ( ‐ ) Page 17 4. Mechanical Characteristics Dimension: 70mm*30mm*7mm INPUT CONNECTOR J3: PIN1:VIN PIN2:VIN PIN3:VIN PIN4:GND PIN5:GND PIN6GND PIN7:BRIGHTNESS PIN8:ON/OFF 7mm Page 18 8.0 AD5621GD SPECIFICATION (DLH0835 V2 Only) We developed this A/D board to support industrial high brightness and commercial applications. This A/D board has many functions. It has options of external luminance sensor, a surface mounted VR button to control the brightness, fan rotation and thermal sensor. The rev.1 has released for European RoHS Compliant purpose. General Description Max Resolution Up To WXGA 60Hz LVDS Output Support Panel DC5V or 3.3V, 12V Output External Fan Control by Software OSD Control Inverter 0~5V Dimming Control 2Wx2 Audio Output Input Power 12V Analog signal Input (RGB) *External V.R. brightness control *External light sensor brightness control Page 19 Supported Timing (*by your panel resolution) The following table displays optimum quality modes that the LCD monitor provides. If the other video modes are used, the monitor will stop working or display a poor quality picture. TIMMING MODE RESOLUTION VGA 640x480@60Hz 640x480@72Hz 640x480@75Hz SVGA 800x600@56Hz 800x600@60Hz 800x600@72Hz 800x600@75Hz XGA 1024x768@60Hz 1024x768@70Hz 1024x768@75Hz SXGA 1280x1024@60Hz 1280x1024@70Hz 1280x1024@75Hz WXGA 1366x768@60Hz Page 20 Page 21 Outline Dimensions unit:mm Page 22 Pin Define Page 23 CN1: Panel connector Pin No. Function Pin No. Function 1 RxO0+ 16 RxE1- 2 RxO0- 17 RxE2+ 3 RxO1+ 18 RxE2- 4 RxO1- 19 RxEC+ 5 RxO2+ 20 RxEC- 6 RxO2- 21 RxE3+ 7 RxOC+ 22 RxE3- 8 RxOC- 23 GND 9 RxO3+ 24 GND 10 RxO3- 25 GND 11 GND 26 GND 12 GND 27 PANEL-VCC 13 RxE0+ 28 PANEL-VCC 14 RxE0- 29 PANEL-VCC 15 RxE1+ 30 PANEL-VCC CN2: DVI-D Input connector Pin No. Function Pin No. Function Pin No. Function 1 T.M.D.S. Data2- 9 T.M.D.S. Data1- 17 T.M.D.S. Data0- 2 T.M.D.S. Data2+ 10 T.M.D.S. Data1+ 18 T.M.D.S. Data0+ 3 T.M.D.S. Data2/4 Shield 11 T.M.D.S Data1/3 Shield 19 T.M.D.S. Data0/5 Shield 4 T.M.D.S. Data4- 12 T.M.D.S. Data3- 20 T.M.D.S. Data5- 5 T.M.D.S. Data4+ 13 T.M.D.S. Data3+ 21 T.M.D.S. Data5+ 6 DDC Clock 14 +5V Power 22 7 DDC Data 15 8 Not Connected 16 Ground (for +5V) Hot Plug Detect Page 24 T.M.D.S. Clock Shield 23 T.M.D.S. Clock+ 24 T.M.D.S. Clock- CN3: DVI-D Input connector(16pin connector) Pin No. Function Pin No. Function Pin No. Function 1 T.M.D.S. 7 DDC Data 13 GND 2 T.M.D.S. 8 DDC Clock 14 GND 3 T.M.D.S. 9 GND 15 Hot Plug Detect 4 T.M.D.S. 10 GND 16 +5V Power 5 T.M.D.S. 11 T.M.D.S. Clock- 6 T.M.D.S. 12 T.M.D.S. Clock+ CN4: Analog RGB Input connector(D-SUB 15Pin) Pin No. Symbol Description Pin No. Symbol Description 1 RED Analog Red 9 NC +5VDC 2 GREEN Analog Green 10 SGND Sync GND 3 BLUE Analog Blue 11 NCD Reserved 4 GND Reserved 12 SDA DDC Serial Data 5 NC VGA_CAB 13 HSYNC Horizontal Sync 6 RGND Red Return 14 VSYNC Vertical Sync 7 GGND Green Return 15 SCL DDC Data Clock 8 BGND Blue Return CN5: Analog RGB Input connector(13pin connector) Pin No. Symbol Description Pin No. Symbol Description 1 SCL DDC Data Clock 8 RED Analog Red 2 SDA DDC Serial Data 9 GGND Green Return 3 GND Reserved 10 GREEN Analog Green 4 NC VGA_CAB 11 BGND Blue Return 5 VSYNC Vertical Sync 12 BLUE Analog Blue 6 HSYNC Horizontal Sync 13 NC +5VDC 7 RGND Red Return Page 25 J1: Power DIN Jack(12V) Pin No. Function Pin No. Function 1 12VDC 2 12VDC 3 GND 4 GND J2: Power connector(12V) Pin No. Function Pin No. Function 1 12VDC 4 GND 2 12VDC 5 GND 3 12VDC 6 GND J3: Power connector(5V) Pin No. Function Pin No. Function 1 5VDC 2 5VDC 3 GND 4 GND J4: Inverter Connector Pin No. Symbol Description Pin No. Symbol Description 1 ON/OFF Backlight ON/OFF 5 GND GND 2 BRIGHT Dimming adjust 6 12VDC Input 12VDC 3 GND GND 7 12VDC Input 12VDC 4 GND GND 8 12VDC Input 12VDC J5,J6: FAN Pin No. Function Pin No. Function 1 FAN(+) 2 GND J7: Key Pad Pin No. Function Pin No. Function 1 POWER KEY 6 MENU KEY 2 GREEN LED 7 AUTO KEY 3 RED LED 8 GND 4 LEFT KEY 9 GND 5 RIGHT KEY Page 26 J8: TO Audio PCB connector(Audio control) Pin No. Function Pin No. Function 1 12VDC 5 5VDC 2 12VDC 6 Volume 3 GND 7 Mute 4 GND J9: Ambient Pin No. Function Pin No. Function 1 NC 3 GND 2 L_Sensor J10: VR connector Pin No. Function Pin No. Function 1 3,3VDC 2 VR 3 GND J11: G-PROBE(RS232) Pin No. Function Pin No. Function 1 5VDC 3 RXD 2 TXR 4 GND Pin No. Function Pin No. Function 1-2 12V 5-6 3.3V 3-4 5V JP1:PANEL VCC DC characteristics. Power Consumption 6 W Operation Temperation 0~70 ℃ Storage Temperature -20~85 ℃ Note: This Value is for a/d board body. Page 27 Note1 OSD menu Here are some instructions for you to use the OSD (On Screen Display). By pressing the “menu”, you will see the below picture. Timing shows resolution, H-frequency,and V-frequency of the panel.Version shows the firmware control version. This 2 information is not changeable by user. There are 7 sub pages inside the OSD manual, Brightness, Signal select, Sound, Color, Image, Tools, and Exit. When you press “menu” button, you enter the “Brightness” sub page. press ’’menu’’ press ’’menu press ’’menu’’ You will see 4 selections: press ’’menu’’ OSD Brightness: press ’’right’’ key press “menu” once, you can go into adjust the brightness. Press “left” you can dim down the brightness to “0”, while press “right” you can increase the brightness to “100”. Ambient light sensor: press this Icon, must to accompany with Litemax ambient light sensor to auto dimming.(OPTION) Potentiometer: press this icon, adjust VR function.(OPTION) Ambient light sensor with OSD offset: press this Icon Press ’’right’’ key Press ’menu’’ once, you can adjust min. luminance to fit your application (OPTION) Contrast: Press “menu” and “right” you can adjust the contrast from “0” to “100” by pressing the “left” and “right”. Exit: You can exit this sub menu back to normal screen. Page 28 Analog: RGB/VGA INPUT Digital: DVI input Exit: You can exit this sub menu back to normal screen. There are 3 options for “Sound” sub page. Audio Volume: Audio volume adjustment. Mute: You can mute the speaker by pressing this option. Exit: back to the normal screen. Page 29 Auto Color: by press this “Auto Color” option, you can get the optimal color performance. SRGB: Windows standard color setting. Color Tempture: You can have 3 options in this selection. Color Tempture User Color Tempture_6500K Color Tempture_93OOK “user mode”, “6500K” (Warm color scheme), “9300K (Cold color scheme). Def ault is “user”, and inside all “R”, “G”, and “B” are set “100” Exit: back to the normal screen. Page 30 Go into the “Image” page, you can see below picture. Auto just: Pressing this option, the AD5621 will adjust the optimal frequency of horizontal and vertical. You will see “Auto tune….” On the screen for around 3 seconds. Clock: If you are not satisfied about the Autotune result, you can adjust manually by “Clock”. The screen will be “wider” if you adjust this function. Phase: If you see “double image” on characters, you can adjust “Phase” to make it perfect image. HPos: You can shift the screen horizontally by this function. Vpos: You can shift the screen vertically by this function. Exit: Back to normal screen. On the “Tools” sub menu, you will see 5 icons. Osd Control: Select this option, you will see 4 more options: Page 31 Osd_time: You can selection the time of OSD from 2 sec. to 16 sec. D Osd_HPos: You can move the OSD horizontally over the screen. Osd_VPos: You can move the OSD Vertically over the screen. Exit: back to main menu. Factory_Reset: By pressing this, the screen will be back to the factory setting on very beginning and lost all the personal settings. Sharpness: You can make the characters looks sharper. Dos_mode/Gxf_mode: Some old programs running over 640x400 and 720x400 (DOS Mode and graphics mode), you need to select this option manually. Exit Factory Burn-in mode: While your VGA cable is connected on the monitor, press “Menu” and Left <” simultaneously, you will see “BURN IN MODE” on the center of the screen for 3 sec. Then unplug the VGA cable, the screen will show Red, Green, Blue, White, and Black in sequence automatically. You can plug in the VGA signal cable, and re-plug the power connector to exit the burn-in mode. Page 32 OSD Lock Function: It is possible to lock all the OSD buttons to prevent unauthorized changes to occur by pressing “Menu” and “right >” buttons simultaneously. the center of the screen for 3 seconds. You will see the “lock” icon below on If any button is pushed after the lock function is initiated, the below icon will appear on the screen.' To release the OSD lock, press “Menu” and “Right >”. the screen for 3 seconds. The below icon will appear on the center of Now all OSD keys are active again. Page 33 9.0 MECHANICAL DRAWING Page 34 10.0 PRECAUTIONS HANDLING PRECAUTIONS (1) The module should be assembled into the system firmly by using every mounting hole. Be careful not to twist or bend the module. (2) While assembling or installing modules, it can only be in the clean area. The dust and oil may cause electrical short or damage the polarizer. (3) Use fingerstalls or soft gloves in order to keep display clean during the incoming inspection and assembly process. (4) Do not press or scratch the surface harder than a HB pencil lead on the panel because the polarizer is very soft and easily scratched. (5) If the surface of the polarizer is dirty, please clean it by some absorbent cotton or soft cloth. Do not use Ketone type materials (ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl chloride. It might permanently damage the polarizer due to chemical reaction. (6) Wipe off water droplets or oil immediately. Staining and discoloration may occur if they left on panel for a long time. (7) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of contacting with hands, legs or clothes, it must be washed away thoroughly with soap. (8) Protect the module from static electricity, it may cause damage to the C-MOS Gate Array IC. (9) Do not disassemble the module. (10) Do not pull or fold the lamp wire. (11) Pins of I/F connector should not be touched directly with bare hands. STORAGE PRECAUTIONS (1) High temperature or humidity may reduce the performance of module. Please store LCD module within the specified storage conditions. (2) It is dangerous that moisture come into or contacted the LCD module, because the moisture may damage LCD module when it is operating. (3) It may reduce the display quality if the ambient temperature is lower than 10 ºC. For example, the response time will become slowly, and the starting voltage of lamp will be higher than the room temperature. OPERATION PRECAUTIONS (1) Do not pull the I/F connector in or out while the module is operating. (2) Always follow the correct power on/off sequence when LCD module is connecting and operating. This can prevent the CMOS LSI chips from damage during latch-up. Page 35