PCA-6114P10-B: 14-slot backplane 1 CPU/ 10 PCI/ 3 ISA Rev. B1-03 size: 315x260mm 1. Connectors Connector Description ISA3~ISA4 PPCI1~PPCI SPCI4~SPCI ISA1~ISA2 KB1 KB2~KB3 KB4 BIG1 AT1 ATX1 CN1 CN2 CN3 FAN CN4 FAN 16 Bit ISA Bus connector 32 Bit PCI Bus connector (Primary) 32 Bit PCI Bus connector (Secondary) PICMG connector KB-In, from CPU card K/B connector KB-Out, 5 pin extemal K/B connector KB-Out, 5 pin AT external K/B connector Big 4 Pin Power connector AT Power connector ATX Power connector PS-ON Function, to CPU card for ATX 8 pin Alarm Board Power connector 3 pin +5V and +12V FAN connector (reserved) 2. Pin Assignments Pin 1 2 3 CN1 Name PS-ON GND 5V Pin 1 2 3 4 5 6 7 8 CN2 Name 5VSB GND GND -5V +5V +3.3V -12V +12V Pin 1 2 3 CN3 FAN Name +12V GND +5V Pin 1 2 3 CN4 FAN Name +12V GND +5V Pin 1 2 3 4 5 6 7 8 9 10 11 12 AT1 Name NC +5V +12V -12V GND GND GND GND -5V +5V +5v +5V Pin 1 2 3 4 BIG1 Name +12V GND GND +5V KB-1/KB-2/KB-3 Pin Name 1 KBCLK 2 KBDATA 3 NC 4 KBGND 5 KBVCC Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ATX1 Name +3.3V +3.3V GND +5V GND +5V GND NC 5VSB +12V +3.3V -12V GND PS-ON GND GND GND -5V +5V +5V 3. Jumper J1: Power Type Select (reserved) J1 open ATX closed* AT * Default setting: closed The PCA-6114P10-B can also support 3.3V power. If 3.3V power is needed while using an AT power supply, please contact Advantech sales for customization. 4. PCI Routing Table Primary PCI Group PCI Slot IDSEL PCI interrupt Pin Route INTA INTB INTC INTD PPCI1 P_AD31 INTB INTC INTD INTA PPCI2 P_AD30 INTC INTD INTA INTB PPCI3 P_AD29 INTD INTA INTB INTC6 Secondary PCI Group PCI Slot IDSEL PCI interrupt Pin Route INTA INTB INTC INTD SPCI1 P_AD20 INTA INTB INTC INTD SPCI2 P_AD21 INTB INTC INTD INTA SPCI3 P_AD22 INTC INTD INTA INTB SPCI4 P_AD23 INTD INTA INTB INTC 5. Detachable Board Depending on chassis usage, users may need to remove the detachable board along the dotted lines. P/N:2002611480