PCM-9362 Intel® Atom™ N450/D510 3.5” SBC with VGA, LVDS, 2 LAN, SATA, Mini PCIe and SSD Startup Manual Specifications Packing List Before you begin installing your card, please make sure that the following items have been shipped: 1. 1 PCM-9362 SBC 2. 1 Startup Manual 3. 1 Utility CD 4. 1 Mini jumper pack p/n: 9689000002 5. 1 SATA cable p/n: 1700006291 6. 1 Keyboard/Mouse cable p/n: 1703060191 7. 1 ATX Power cable p/n: 1700000265 8. 1 Audio cable p/n: 1703100152 9. 1 COM2 cable p/n: 1701140201 10. 2 USB 2 port cables p/n: 1703100121 11. 1 SATA power cable p/n: 1703150102 12. 1 LPT cable p/n: 1700260250 If any of these items are missing or damaged, please contact your distributor or sales representative immediately. Note 1: For detailed contents of PCM-9362, please refer to information on the enclosed CD-ROM (in PDF format). Note 2: Acrobat Reader is required to view any PDF file. Acrobat Reader can be downloaded at: www.adobe.com/Products/acrobat/readstep2. html (Acrobat is a trademark of Adobe) General • • • • • • • • • CPU: Intel® Atom™ Processor N450/D510 1.67 GHz System Chipset: Intel® Atom™ N450/D510+ICH8M System Memory: DDR2 667 MHz up to 2 GB BIOS: AMI 16 Mbit Flash BIOS Watchdog Timer: 255 level timer interval Expansion Interface: Mini-PCIe Battery: Lithium 3 V/210 mAH SATA interface: Two SATA ports support 300 MB/s Keyboard/mouse connector: Support internal pinheader connector for KB/mouse using • USB: Six USB 2.0 compliant universal serial bus ports • Audio: High Definition Audio(HD), Line-in, Line-out, Mic-in • GPIO: 8-bit general purpose Input/Output Solid State Disk • Supports one 50-pin socket for CFC type I/II VGA/LVDS Interface • Chipset: Embedded Gen3.5+ GFX Core • Memory Size: Up to 224 MB of dynamic video memory allocation • Resolution: - CRT: Intel Atom N450 up to 1400 x 1050 (SXGA) Intel Atom D510 up to 2048 x 1536 - LVDS: Single channel 18-bit LVDS up to WXGA 1366 x 768 • LVDS LCD: - Support 18-bit LVDS LCD • Dual Display: - CRT+LVDS (18-bit) Ethernet Interface For more information on this and other Advantech products, please visit our website at: • Chipset supports: 10/100/1000 Mbps - LAN1 Intel 82567, LAN2 Intel 82583V • Ethernet interface: IEEE 802.3,IEEE 802.3u, IEEE 802.3x, IEEE 8023y, IEEE802.ab (100 BASE-T) protocol compatible http://www.advantech.com Mechanical and Enviromental http://www.advantech.com/eplatform • Dimensions: 146 x 102 mm (5.7” x 4”) Mechanical Drawing is available. • Power Supply Type: AT/ATX • Power Requirement: For technical support and service, please visit our support website at: http://service.advantech.com.tw/suppot/ This manual is for the PCM-9362 Series Rev. A1 Part No. 2006936200 Print in China 1st Edition, November 2009 - AT: 5 V or 12 V, ATX: 5 V, 5 V sb (12 V is optional for LCD inverter and add on card) - AT: 12 V, ATX: 12 V, 5 V sb PCM-9362 Startup Manual Specifications • Power Consumption: - Typical in XP mode: PCM-9362NC-S6A1E: 5 V : 2.31 A PCM-9362N-S6A1E: 12 V : 0.87 A PCM-9362D-S6A1E: 12 V : 0.91 A - Max in HCT: PCM-9362NC-S6A1E: 5 V : 2.36 A PCM-9362N-S6A1E: 12 V : 1.01 A PCM-9362D-S6A1E: 12 V : 1.17 A • Operating Temperature: 0 ~ 60° C (32 ~ 140° F) • Weight: 0.85 kg (reference weight of total package) Jumpers and Connectors The board has a number of jumpers that allow you to configure your system to suit your application. The table below lists the function of each of the jumpers and connectors. Jumpers Jumpers and Connectors Connectors Label Function CN1 Audio CN2 SATA CN3 SATA CN4 GPIO CN5 HDD & PWR LED CN6 12V AT Power Input CN7 COM3/COM4 CN8 AT/ATX Power Input CN9 MIO 2.0 CN10 PS2 CN11 SMBus CN12 COM2 Label Function CN13 Inverter Power Output J2 COM2 Setting CN14 Internal USB J3 AT / ATX Power SEL CN15 Internal USB J4 Clear CMOS CN16 18 bits LVDS Panel Panel Voltage SEL CN17 LAN (Optional) CN18 LAN1 CN19 LAN2 CN20 Power Switch (Low Active ) CN21 LPT CN22 Standby Power Input CN23 Reset CN24 External USB CN25 External USB CN26 COM1 CN27 VGA CN28 Mini PCIE lock CN29 Mini PCIE slot CN30 DDR2 SODIMM CN31 BIOS Socket CN32 CF J5 PCM-9362 Startup Manual Jumpers and Connectors Jumpers Setting J4 Clear COMS Part Number 1653003101 J2 COM2 Setting Part Number 1653003260 Footprint HD_3x1P_79_D Footprint HD_3x2P_79 Description PIN HEADER 3*1P 180D(M) 2.0 mm DIP SQUARE W/O Pb Description PIN HEADER 3*2P 180D(M) 2.0 mm SMD SOUARE PIN Setting Function Setting Function (1-2) Normal (1-2) RS232 (2-3) Clear CMOS (3-4) RS485 (5-6) RS422 J5 PAN VOL SEL Part Number 1653003101 Footprint HD_3x1P_79_D Description PIN HEADER 3*1P 180D(M) 2.0 mm DIP SQUARE W/O Pb Setting Function (1-2) +5V (2-3) +3V J3 AT / ATX Power SEL Part Number 1653002101 Footprint HD_2x1P_79_D Description PIN HEADER 2*1P 180D(M)SQUARE 2.0 mm DIP W/O Pb Setting Function (1-2) AT Power SEL EMPTY ATX Power PCM-9362 Startup Manual PCM-9362 Jumpers and Connectors PCM-9362 Jumpers and Connectors (Component Side) PCM-9362 Jumpers and Connectors (Solder Side) PCM-9362 Startup Manual PCM-9362 Mechanical Drawing PCM-9362 Mechanical Drawing (Component Side) PCM-9362 Mechanical Drawing (Solder Side) PCM-9362 Startup Manual PCM-9362 Mechanical Drawing PCM-9362 Mechanical Drawing (Side View) PCM-9362 Startup Manual