DCR2150C42

DCR2150C42
Phase Control Thyristor
DS5811-3 January 2014 (LN31255)
FEATURES
KEY PARAMETERS

Double Side Cooling

High Surge Capability
VDRM
IT(AV)
ITSM
dV/dt*
dI/dt
APPLICATIONS
4200V
2150A
29000A
1500V/µs
400A/µs
* Higher dV/dt selections available

High Power Drives

High Voltage Power Supplies

Static Switches
VOLTAGE RATINGS
Part and
Ordering
Number
Repetitive Peak
Voltages
VDRM and VRRM
V
DCR2150C42
DCR2150C40
DCR2150C35
DCR2150C30
4200
4000
3500
3000
Conditions
Tvj = -40°C to 125°C,
IDRM = IRRM = 200mA,
VDRM, VRRM tp = 10ms,
VDSM & VRSM =
VDRM & VRRM + 100V
respectively
Lower voltage grades available.
ORDERING INFORMATION
When ordering, select the required part number
shown in the Voltage Ratings selection table.
Outline type code: C
(See Package Details for further information)
Fig. 1 Package outline
For example:
DCR2150C42
Note: Please use the complete part number when ordering
and quote this number in any future correspondence
relating to your order.
1/10
www.dynexsemi.com
DCR2150C42
SEMICONDUCTOR
CURRENT RATINGS
Tcase = 60°C unless stated otherwise
Symbol
Parameter
Test Conditions
Max.
Units
2150
A
Double Side Cooled
IT(AV)
Mean on-state current
IT(RMS)
RMS value
-
3377
A
Continuous (direct) on-state current
-
3280
A
IT
Half wave resistive load
SURGE RATINGS
Symbol
ITSM
2
It
Parameter
Surge (non-repetitive) on-state current
Test Conditions
Max.
Units
10ms half sine, Tcase = 125°C
29.0
kA
VR = 0
4.2
MA s
Min.
Max.
Units
2
I t for fusing
2
THERMAL AND MECHANICAL RATINGS
Symbol
Rth(j-c)
Rth(c-h)
Parameter
Thermal resistance – junction to case
Thermal resistance – case to heatsink
Test Conditions
Double side cooled
DC
-
0.0101
°C/W
Single side cooled
Anode DC
-
0.0176
°C/W
Cathode DC
-
0.0239
°C/W
Double side
-
0.0025
°C/W
-
0.005
°C/W
-
125
°C
Clamping force 37kN
(with mounting compound)
Blocking VDRM / VRRM
Single side
Tvj
Virtual junction temperature
Tstg
Storage temperature range
-55
125
°C
Fm
Clamping force
33.0
41.0
kN
2/10
www.dynexsemi.com
DCR2150C42
SEMICONDUCTOR
DYNAMIC CHARACTERISTICS
Symbol
IRRM/IDRM
Parameter
Test Conditions
Min.
Max.
Units
Peak reverse and off-state current
At VRRM/VDRM, Tcase = 125°C
-
200
mA
dV/dt
Max. linear rate of rise of off-state voltage
To 67% VDRM, Tj = 125°C, gate open
-
1500
V/µs
dI/dt
Rate of rise of on-state current
From 67% VDRM to 2x IT(AV)
Repetitive 50Hz
-
200
A/µs
Gate source 30V, 10,
Non-repetitive
-
400
A/µs
tr < 0.5µs, Tj = 125°C
VT(TO)
rT
tgd
Threshold voltage – Low level
500A to 2000A at Tcase = 125°C
-
0.9
V
Threshold voltage – High level
2000A to 7000A at Tcase = 125°C
-
1.08
V
On-state slope resistance – Low level
500A to 2000A at Tcase = 125°C
-
0.36
m
On-state slope resistance – High level
2000A to 7000A at Tcase = 125°C
-
0.265
m
VD = 67% VDRM, gate source 30V, 10
-
3
µs
250
500
µs
1000
3000
µC
Delay time
tr = 0.5µs, Tj = 25°C
tq
Turn-off time
Tj = 125°C, VR = 200V, dI/dt = 1A/µs,
dVDR/dt = 20V/µs linear
QS
Stored charge
IT = 2000A, Tj = 125°C, dI/dt – 1A/µs,
IL
Latching current
Tj = 25°C, VD = 5V
-
3
A
IH
Holding current
Tj = 25°C, RG-K = , ITM = 500A, IT = 5A
-
300
mA
3/10
www.dynexsemi.com
DCR2150C42
SEMICONDUCTOR
GATE TRIGGER CHARACTERISTICS AND RATINGS
Symbol
Parameter
Test Conditions
Max.
Units
VGT
Gate trigger voltage
VDRM = 5V, Tcase = 25°C
1.5
V
VGD
Gate non-trigger voltage
At 50% VDRM, Tcase = 125°C
0.4
V
IGT
Gate trigger current
VDRM = 5V, Tcase = 25°C
350
mA
IGD
Gate non-trigger current
At 50% VDRM, Tcase = 125°C
10
mA
CURVES
7000
Instantaneous on-state current, IT - (A)
min 125°C
max 125°C
6000
min 25°C
max 25°C
5000
4000
3000
2000
1000
0
0.5
1.0
1.5
2.0
2.5
3.0
Instantaneous on-state voltage, VT - (V)
Fig.2 Maximum & minimum on-state characteristics
VTM EQUATION
VTM = A + Bln (IT) + C.IT+D.IT
Where
A = 0.137154
B = 0.132631
C = 0.000248
D = -0.001126
these values are valid for Tj = 125°C for IT 100A to 7000A
4/10
www.dynexsemi.com
DCR2150C42
SEMICONDUCTOR
130
Maximum case temperature, Tcase ( C )
16
Mean power dissipation - (kW)
o
14
12
10
8
6
180
120
4
90
60
2
30
90
100
60
90
30
80
70
60
50
40
30
20
10
0
0
1000
2000
3000
4000
0
1000
2000
3000
4000
Mean on-state current, IT(AV) - (A)
Mean on-state current, IT(AV) - (A)
Fig.3 On-state power dissipation – sine wave
Fig.4 Maximum permissible case temperature,
double side cooled – sine wave
130
180
120
90
60
30
120
110
100
90
80
70
60
50
40
30
20
12
Mean power dissipation - (kW)
o
120
110
0
Maximum heatsink temperature, THeatsink - ( C )
180
120
10
8
6
d.c.
180
120
90
60
30
4
2
10
0
0
1000
2000
3000
Mean on-state current, IT(AV) - (A)
Fig.5 Maximum permissible heatsink temperature,
double side cooled – sine wave
0
0
1000
2000
3000
4000
5000
Mean on-state current, I T(AV) - (A)
Fig.6 On-state power dissipation – rectangular wave
5/10
www.dynexsemi.com
DCR2150C42
130
130
d.c.
180
120
90
60
30
120
110
100
90
80
Maximum heatsik temperature Theatsink - (oC)
T - (°C)
Maximum permissible case temperature ,case
SEMICONDUCTOR
70
60
50
40
30
20
10
0
d.c.
180
120
90
60
30
120
110
100
90
80
70
60
50
40
30
20
10
0
0
1000
2000
3000
4000
5000
0
Mean on-state current, IT(AV) - (A)
Fig.7 Maximum permissible case temperature,
double side cooled – rectangular wave
Thermal impedance, tZ
h(j-c) - ( °C/kW)
3000
4000
Anode side cooled
2
2.576
3
4.5096
0.006176
0.0517916
0.3820376
1.06
1.0977
2.4566
4.0469
9.9994
0.006153
0.050142
0.3129407
5.27
1.1519
2.8926
2.4064
17.4793
0.006389
0.0582953
0.3775516
3.97
Ri (°C/kW)
Ti (s)
Ri (°C/kW)
Anode Side
Cooling
Cathode side cooled
Cathode Sided
Cooling
Zth =  [Ri x ( 1-exp. (t/ti))]
Ti (s)
15
1
1.1043
Ri (°C/kW)
Ti (s)
Double Side
Cooling
20
2000
Fig.8 Maximum permissible heatsink temperature,
double side cooled – rectangular wave
Double side cooled
30
25
1000
Mean on-state current, IT(AV) - (A)
4
1.9009
[1]
Rth(j-c) Conduction
Tables show the increments of thermal resistance R th(j-c) when the device
operates at conduction angles other than d.c.
10
Double side cooling
Zth (z)
°
180
120
90
60
30
15
5
0
0.001
0.01
0.1
1
10
sine.
1.95
2.32
2.74
3.14
3.46
3.61
rect.
1.26
1.89
2.27
2.70
3.19
3.47
Anode Side Cooling
Zth (z)
°
180
120
90
60
30
15
sine.
1.95
2.32
2.74
3.14
3.46
3.62
rect.
1.26
1.89
2.27
2.70
3.19
3.47
Cathode Sided Cooling
Zth (z)
°
180
120
90
60
30
15
sine.
1.95
2.31
2.72
3.12
3.43
3.58
rect.
1.26
1.88
2.26
2.68
3.17
3.44
100
Time - ( s )
Fig.9 Maximum (limit) transient thermal impedance – junction to case (°C/kW)
6/10
www.dynexsemi.com
DCR2150C42
SEMICONDUCTOR
Fig.10 Multi-cycle surge current
Fig.11 Single-cycle surge current
14000
500
QS (max) =
I - (A)
Reverse recovery current,RR
Stored Charge, QS - (uC)
450
2524.7*(di/dt)0.5257
12000
QS (min)=
10000
1046.8*(di/dt)0.659
8000
6000
Conditions:
Tj=125oC, VRpeak ~ 2500V
VRM ~1700V
snubber as appropriate to
control reverse voltages
4000
2000
IRRmax = 42.033*(di/dt)0.7538
400
350
300
250
IRRmin =
26.684*(di/dt)0.827
200
150
Conditions:
Tj=125oC, VRpeak ~ 2500V
VRM ~1700V
snubber as appropriate to
control reverse voltages
100
50
0
0
10
20
30
Rate of decay of on-state current, di/dt - (A/us)
Fig.12 Reverse recovery charge
0
0
10
20
30
Rate of decay of forward current, di/dt - (A/us)
Fig.13 Reverse recovery current
7/10
www.dynexsemi.com
DCR2150C42
SEMICONDUCTOR
Fig14 Gate Characteristics
30
Lower Limit
Upper Limit
5W
10W
20W
50W
100W
150W
-40C
Gate trigger voltage, VGT - (V)
25
20
15
10
5
0
0
1
2
3
4
5
6
7
8
9
10
Gate trigger current, IGT - (A)
Fig. 15 Gate characteristics
8/10
www.dynexsemi.com
DCR2150C42
SEMICONDUCTOR
PACKAGE DETAILS
For further package information, please contact Customer Services. All dimensions in mm, unless stated otherwise.
DO NOT SCALE.
Device
DCR2860C22
DCR2630C28
DCR2150C42
DCR1950C52
DCR1650C65
DCR1370C85
Maximum Minimum
Thickness Thickness
(mm)
(mm)
26.415
25.865
26.49
25.94
26.76
26.17
26.84
26.29
27.1
26.55
27.46
26.91
Lead length: 420mm
Lead terminal connector: M4 ring
Package outline type code: C
Fig.16 Package outline
9/10
www.dynexsemi.com
DCR2150C42
SEMICONDUCTOR
IMPORTANT INFORMATION:
This publication is provided for information only and not for resale.
The products and information in this publication are intended for use by appropriately trained technical personnel.
Due to the diversity of product applications, the information contained herein is provided as a general guide only and does not constitute
any guarantee of suitability for use in a specific application.The user must evaluate the suitability of the product and the completeness of
the product data for the application. The user is responsible for product selection and ensuring all safety and any warning requirements
are met. Should additional product information be needed please contact Customer Service.
Although we have endeavoured to carefully compile the information in this publication it may contain inaccuracies or typographical
errors. The information is provided without any warranty or guarantee of any kind.
This publication is an uncontrolled document and is subject to change without notice. When referring to it please ensure that it is the
most up to date version and has not been superseded.
The products are not intended for use in applications where a failure or malfunction may cause loss of life, injury or damage to property.
The user must ensure that appropriate safety precautions are taken to prevent or mitigate the consequences of a product failure or
malfunction.
The products must not be touched when operating because there is a danger of electrocution or severe burning. Always use protective
safety equipment such as appropriate shields for the product and wear safety glasses. Even when disconnected any electric charge
remaining in the product must be discharged and allowed to cool before safe handling using protective gloves.
Extended exposure to conditions outside the product ratings may affect reliability leading to premature product failure. Use outside the
product ratings is likely to cause permanent damage to the product. In extreme conditions, as with all semiconductors, this may include
potentially hazardous rupture, a large current to flow or high voltage arcing, resulting in fire or explosion. Appropriate application design
and safety precautions should always be followed to protect persons and property.
Product Status & Product Ordering:
We annotate datasheets in the top right hand corner of the front page, to indicate product status if it is not yet fully approved for
production. The annotations are as follows:Target Information:
Provisional Information:
Preliminary Information:
No Annotation:
This is the most tentative form of information and represents a very preliminary specification.
No actual design work on the product has been started.
Some initial development work has been performed. The datasheet represents a view of the
end product based on very limited information. Certain details will change.
The product design is complete and final characterisation for volume production is in
progress.The datasheet represents the product as it is now understood but details may change.
The product has been approved for production and unless otherwise notified by Dynex any
product ordered will be supplied to the current version of the data sheet prevailing at the
time of our order acknowledgement.
All products and materials are sold and services provided subject to Dynex’s conditions of sale, which are available on request.
Any brand names and product names used in this publication are trademarks, registered trademarks or trade names of their
respective owners.
HEADQUARTERS OPERATIONS
DYNEX SEMICONDUCTOR LIMITED
Doddington Road, Lincoln, Lincolnshire, LN6 3LF
United Kingdom.
Phone: +44 (0) 1522 500500
Fax:
+44 (0) 1522 500550
Web: http://www.dynexsemi.com
 Dynex Semiconductor Ltd.
CUSTOMER SERVICE
Phone: +44 (0) 1522 502753 / 502901
Fax:
+44 (0) 1522 500020
e-mail: power_solutions@dynexsemi.com
Technical Documentation – Not for resale.
10/10
www.dynexsemi.com