DRA4 MCX Series • 54mm Four Channel DIN Rail Mount SSR Assembly • AC Ratings up to 280 VAC and 5 Amps • 3-15 and 15-32VDC control • Cage style screw terminals for easy connection • Fits standard 35mm DIN rail • Includes LED Status indicator PRODUCT SELECTION Description 3-15 VDC Control 15-32 VDC Control 5A DRA4-MCX240D5 DRA4-MCXE240D5 OUTPUT SPECIFICATIONS (1) Description DRA4-MCX(E)240x5 Operating Voltage [VAC] Transient Overvoltage [Vpk] Maximum Load Current [Arms] (2) Minimum Load Current [Arms] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum off-state dv/dt @ maximum rated voltage [V/µsec] (3) Maximum 1 Cycle Surge Current (50/60 Hz) [Apk] Maximum I²t for fusing (50/60 Hz, 1/2 cycle) [A² sec] Maximum On-State Voltage Drop @ Rated Current [Vpk] 12-280 600 5 0.06 0.1 500 239/250 285/260 1.4 INPUT SPECIFICATIONS (1) Description Control Voltage Range Must Turn On Voltage Must Turn Off Voltage Typycal Input Current Nominal Input Impedance Maximum Turn-On Time [msec] Maximum Turn-Off Time [µsec] DRA4-MCX DRA4-MCXE 3-15 VDC 3.0 VDC 1 .0 VDC 15 mAdc 300 Ohm 1/2 Cycle 1/2 Cycle 15-32 VDC 15.0 VDC 1 .0 VDC 15 mAdc 1500 Ohm 1/2 Cycle 1/2 Cycle GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 VDC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Encapsulation Parameters 4000 VRMS 109 Ohms 10 pF -40 to 80°C -40 to 125 °C 0.32 lb (145.5g) Themally Conductive Epoxy GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) See derating chart on page 3 3) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 MECHANICAL SPECIFICATIONS WIRING DIAGRAM THERMAL DERATE INFORMATION AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 E116949 (relay only) Rv. 110811 ANNEX - ENVIROMENTAL INFORMATION