HS191DR Series Assemblies • 25 & 32 amp AC output @ 40°C • Single Channel output • 4 to 32 VDC input control voltage PRODUCT SELECTION Description 4-32 VDC Control 25A 32A 32A HS191DR-XBPW6025C HS191DR-XBPW6050C HS191DR-XBPW6060C OUTPUT SPECIFICATIONS (1) Description HS191DR-XBPW6025 HS191DR-XBPW6050 HS191DR-XBPW6060 Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Load Current @ 40°C [Arms] Minimum Load Current [Arms] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) Maximum 1 Cycle Surge Current (50/60 Hz) [Apk] Maximum I²t for Fusing (50/60 Hz) [A² sec] Maximum On-State Voltage Drop @ Rated Current [Vpk] Maximum Wire Size (solid/strand) [AWG/ IECmm²] Load Terminal Screw Torque Range (min-max) in lbs/Nm 24-660 1200 25 0.15 1 500 240/250 285/259 1.6 12/3.31 15-20/1.69-2.26 INPUT SPECIFICATIONS (1) Description Control Voltage Range Minimum Turn-On Voltage Minimum Turn-Off Voltage Maximum Input Current Nominal Input Impeadance Maximum Turn-On Time [msec] Maximum Turn-Off Time [msec] Maximum Wire Size (solid/strand) [AWG/ IECmm²] Input Terminal Screw Torque Range (min-max) in lbs/Nm LED Status Indicator Parameters 4-32 VDC 4.0 VDC 1.0 VDC 14 mA @ 32 VDC See Note 3 1/2 Cycle 1/2 Cycle 8/8.36 8-10/0.9-1.1 Yes, Green GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz) Dielectric Strength, Input/Output (50/60Hz) Minimum Insulation Resistance (@ 500 V DC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Encapsulation Thermal pad installed GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Input circuitry for DC control version incorporates active current limiter Parameters 2500 Vrms 2500 Vrms 109 Ohm 10 pF -40 to 80°C -40 to 125°C 0.82 lb (372g) Themally Conductive Epoxy Yes 24-660 1200 32 0.15 1 500 597/625 1779/1621 1.6 12/3.31 15-20/1.69-2.26 24-660 1200 32 0.15 1 500 597/625 1779/1621 1.6 12/3.31 15-20/1.69-2.26 MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 Rev. 090412 ANNEX - ENVIROMENTAL INFORMATION