DOMINANT Opto Technologies Innovating Illumination TM DATA SHEET: Power DomiLEDTM InGaN : DWx-YJG Product will be discontinued. Product Discontinuation Notice Issued on 24 Nov 2014 Power DomiLED TM With its significant power in terms brightness, viewing angle and variety of application possibilities, Power DomiLED™ truly is a standout performer! Ideal for automotive interior lighting as well as home, office and industrial applications, it is also a proven performer in electronic signs and signals. Features: > > > > > > > High brightness surface mount LED. Long lifetime up to 50,000 hours due to silicone encapsulation. 120° viewing angle. Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Applications: > Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. exterior applications, eg: signal lighting, Center High Mounted Stop Light (CHMSL), > Display: full color display video notice board. > Industry: white goods (eg: Oven, microwave, etc.). > Lighting: architecture lighting, general lighting, garden light, etc © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 14/04/2010 V(4) DOMINANT TM InGaN : DWx-YJG Opto Technologies Innovating Illumination Optical Characteristics (Tj=25˚C) Part Ordering Number Color Viewing Angle˚ Luminous Intensity @ 30mA IV (mcd) Min. Typ. Max. DWT-YJG-WX2-1 True Green; 525nm 120 1125.0 1800.0 2850.0 DWT-YJG-V2W-1 True Green; 525nm 120 900.0 1400.0 1800.0 DWB-YJG-TU2-1 Blue; 470nm 120 285.0 450.0 715.0 Not for new design NOTE 1. All part number above comes in a quantity of 2000 units per reel. 2. Luminous intensity is measured with an accuracy of ± 11%. 3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 4. InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance. Current pulsing should be used for dimming purposes. 5. An optional Vf bining is also available upon request. Bining scheme is as per following table. Electrical Characteristics at Tj=25˚C Part Number Min. (V) DWB, DWT Vf @ If = 30mA Typ. (V) Max. (V) 2.90 3.40 Vr @ Ir = 10uA Min. (V) 5 4.00 Forward voltages are measure using a current pulse of 1 ms and with an accuracy of ± 0.1V. Absolute Maximum Ratings Maximum Value Unit DC forward current 50 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.1) 300 mA 5 V ESD threshold (HBM) 2000 V LED junction temperature 125 ˚C Operating temperature -40 … +110 ˚C Storage temperature -40 … +110 ˚C 200 mW 300 K/W 180 K/W Reverse voltage; Ir (max) = 10µA Power dissipation (at room temperature) Thermal resistance - Junction / ambient, Rth JA - Junction / solder point, Rth JS (Mounting on FR4 PCB, pad size >= 16 mm2 per pad) 2 14/04/2010 V(4) DOMINANT TM InGaN : DWx-YJG Opto Technologies Innovating Illumination Wavelength Grouping at Tj=25˚C Color DWT; True Green DWB; Blue Group Wavelength distribution (nm) Full 520 - 536 W 520 - 524 X 524 - 528 Y 528 - 532 Z 532 - 536 Full 464 - 476 W 464 - 468 X 468 - 472 Y 472 - 476 Dominant wavelength is measured with an accuracy of ± 1 nm. Luminous Intensity Group at Tj=25˚C Luminous Intensity @ IV (mcd) Brightness Group T1 285.0 ... 355.0 T2 355.0 ... 450.0 U1 450.0 ... 560.0 U2 560.0 ... 715.0 V2 900.0 ... 1125.0 W1 1125.0 ... 1400.0 W2 1400.0 ... 1800.0 X1 1800.0 ... 2240.0 X2 2240.0 ... 2850.0 Luminous intensity is measured with an accuracy of ± 11%. Vf Bining (Optional) Vf @ If = 30mA Forward Voltage (V) 34 2.90 ... 3.20 35 3.20 ... 3.50 36 3.50 ... 3.80 Forward voltage, Vf is measured with an accuracy of ± 0.1V. Please consult sales and marketing to incorporate special part number to incorporate Vf binning. 3 14/04/2010 V(4) DOMINANT TM InGaN : DWx-YJG Opto Technologies Innovating Illumination Forward Current Vs Forward Voltage Maximum Forward Current; mA 100 3 90 2.5 Forward Current, mA Relative Intensity; Normlaized at 50mA Relative Intensity Vs Forward Current 2 1.5 1 0.5 80 70 60 50 40 30 20 10 0 0 0 20 40 60 80 100 2.5 3 3.5 4 4.5 Forward Current, mA Forward Voltage, V Maximum Forward Current Vs Temperature Relative Intensity vs Wavelength 55 1 50 0.9 45 0.8 40 35 True Green Blue 0.7 0.6 30 0.5 25 0.4 20 0.3 15 10 0.2 5 0.1 0 0 0 10 20 30 40 50 60 70 80 90 100 110 400 450 500 550 600 650 700 Ambient Temperature Wavelength; nm Wavelength Shift vs Forward Current (True Green) Wavelength Shift Vs Forward Current (Blue) 3.6 14 3.2 12 Wavelength Shift; nm Wavelength Shift; nm 2.8 2.4 2 1.6 1.2 0.8 0.4 0 -0.4 10 8 6 4 2 0 -2 -4 -0.8 -6 -1.2 0 10 20 30 40 50 0 10 20 30 40 50 Forward Current; mA Forward Current; mA 4 14/04/2010 V(4) DOMINANT TM InGaN : DWx-YJG Opto Technologies Innovating Illumination Radiation Pattern 30° 20° 10° 0° 1.0 40° 0.8 50° 0.6 60° 0.4 70° 0.2 80° 90° 0 5 14/04/2010 V(4) DOMINANT TM InGaN : DWx-YJG Opto Technologies Innovating Illumination Power DomiLED • InGaN : DWx-YJG Package Outlines TM Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Silicone Resin Soldering Leads Sn-Sn Plating 6 14/04/2010 V(4) DOMINANT TM InGaN : DWx-YJG Opto Technologies Innovating Illumination Recommended Solder Pad 7 14/04/2010 V(4) DOMINANT TM InGaN : DWx-YJG Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 2000 units. • Reel diameter is 180 mm. 8 14/04/2010 V(4) DOMINANT TM InGaN : DWx-YJG Opto Technologies Innovating Illumination Packaging Specification 9 14/04/2010 V(4) DOMINANT TM InGaN : DWx-YJG Opto Technologies Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group Reel Label Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc Power DomiLED 1 completed bag (2000pcs) 0.034 0.034 190 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM For Power DomiLED Cardboard Box Size TM Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 250 x 250 0.58 15 reels MAX 30,000 MAX Large 416 x 516 x 476 1.74 96 reels MAX 192,000 MAX 10 14/04/2010 V(4) DOMINANT TM InGaN : DWx-YJG Opto Technologies Innovating Illumination Recommended Sn-Pb IR-Reflow Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 275 235-240˚C 10-30s 250 225 Temperature (˚C) 200 Ramp-up 3˚C/sec max. 183˚C 175 60-150s 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-120s 50 360s max 25 0 50 100 150 200 Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 225 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 11 14/04/2010 V(4) DOMINANT TM InGaN : DWx-YJG Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - Initial Release 27 Feb 2009 2 Add new partno: DWT-YJG-WX2-1 Not for new design: DWT-YJG-V2W-1 11 Jun 2009 Update Company Name 15 Mar 2010 Update Thermal Resistance 14 Apr 2010 2 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes at any time without prior notice to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 12 14/04/2010 V(4) DOMINANT TM InGaN : DWx-YJG Opto Technologies Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: Head Quarter DOMINANT Opto Technologies Sdn. Bhd. Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: [email protected] DOMINANT Semiconductors Malaysia Sdn. Bhd. Shanghai Representative Office DOMINANT Semiconductors (Shenzhen) Co. Ltd. Rm 1007, DaZhong Building, No. 1515 Zhong Shan (W) Rd, Shanghai, China 200235 Tel: +86 21 6428 6428 Fax: +86 21 6428 6880 E-mail: [email protected] DOMINANT Korea Sales Office DOMINANT Semiconductors Korea Inc. RM 211 SUNTEAK CITY APT. 513-15 Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, 462-725, Korea Tel: +82-31-701-5203 Fax: +82-31-701-5204 E-mail: [email protected] DOMINANT U.S.A Sales Office 25 Rockaway Road, 08833 Lebanon, New Jersey, USA Tel: (908) 439-9930 Cell: (908) 343-5810 Fax: (908) 439-9929 E-mail: [email protected] DOMINANT Europe Sales Office DOMINANT Semiconductors Europe GmbH Raiffeisenstr. 38, 74906 Bad Rappenau Germany Tel: +49 (0) 7264-89010-10 / +49 (0) 7264-89010-11 Cell: +49 173-6907370 / +49 173-6907751 Fax: +49 (0) 7264-89010-29 E-mail: [email protected]; [email protected] DOMINANT India Sales Office C-11,Vasanth Business Centre #86, TTK Road, Alwarpet Chennai - 600 018, INDIA Tel: 91-44-42030616 / 516 Cell: 91-9444920537 Fax: 91-9444920616 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM