Power DomiLED InGaN Warm White DWF-UJG

DOMINANT
Opto Technologies
Innovating Illumination
Power DomiLED
TM
DATA SHEET:
Power DomiLEDTM
InGaN Warm White : DWF-UJG
TM
With its significant power in terms brightness, viewing angle and variety of
application possibilities, Power DomiLED™ truly is a standout performer!
Ideal for automotive interior lighting as well as home, office and industrial
applications, it is also a proven performer in electronic signs and signals.
Features:
>
>
>
>
>
>
High brightness surface mount LED.
120° viewing angle.
Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm.
Qualified according to JEDEC moisture sensitivity Level 2.
Compatible to both IR reflow soldering.
Environmental friendly; RoHS compliance.
Applications:
> Automotive: interior applications, eg: switches, telematics,
climate control system, dashboard, etc.
exterior applications, eg: signal lighting,
Center High Mounted Stop Light (CHMSL),
> Display: full color display video notice board.
> Industry: white goods (eg: Oven, microwave, etc.).
> Lighting: architecture lighting, general lighting, garden light, etc
© 2005 DomiLED is a trademark of DOMINANT Opto Technologies.
All rights reserved. Product specifications are subject to change without notice.
1
15/03/2010 V3.0
DOMINANT
TM
InGaN Warm White : DWF-UJG
Opto Technologies
Innovating Illumination
Optical Characteristics at Tj=25˚C
Part Ordering
Number
Color
Viewing
Angle˚
DWF-UJG-UV2-1
White
120
Luminous Intensity @ IF = 30mA
Min.
Typ.
Max.
450.0
715.0
Total Flux @ IF=30mA, mlm
Typ.
2000
1125.0
NOTE
1. All part number above comes in a quantity of 2000 units per reel.
2. Luminous intensity is measured with an accuracy of ± 11%.
3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel.
4. InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance. Current pulsing should be used for dimming purposes.
Electrical Characteristics at Tj=25˚C
Part Number
Min. (V)
DWF-UJG
Vf @ If = 30mA
Typ. (V)
Max. (V)
3.05
3.40
Vr @ Ir = 10uA
Min. (V)
5
4.00
Forward voltage, VF is measured with an accuracy of ± 0.1V.
Absolute Maximum Ratings
Maximum Value
Unit
DC forward current
30
mA
Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.005)
200
mA
5
V
ESD threshold (HBM)
2000
V
LED junction temperature
125
˚C
Operating temperature
-40 … +100
˚C
Storage temperature
-40 … +100
˚C
135
mW
Reverse voltage; Ir (max) = 10µA
Power dissipation (at room temperature)
2
15/03/2010 V3.0
DOMINANT
TM
InGaN Warm White : DWF-UJG
Opto Technologies
Innovating Illumination
Color Bin at Tj=25˚C
0.48
0.44
0.40
0.36
•
•
A
•
•
0.41
0.42
B
•
•
0.43
0.44
C
•
•
0.45
0.46
0.32
0.28
0.24
0.20
0.39
0.40
0.47
Chromaticity coordinate groups are measured with an accuracy of ± 0.01.
1
2
3
4
Cx
0.4000
0.4200
0.4200
0.4000
Cy
0.3670
0.3840
0.4310
0.4130
Cx
0.4200
0.4400
0.4400
0.4200
Cy
0.3840
0.4020
0.4490
0.4310
Cx
0.4400
0.4600
0.4600
0.4400
Cy
0.4020
0.4200
0.4670
0.4490
Bin
A
B
C
Correlated Color Temperature (CCT) at Tj=25˚C
Color Bin
Minimum CCT (K)
Maximum CCT (K)
A
3300
3600
B
3000
3300
C
2800
3000
Note: CCT values provided for each of the color bins are an approximation based on correlation.
3
15/03/2010 V3.0
DOMINANT
TM
InGaN Warm White : DWF-UJG
Opto Technologies
Innovating Illumination
Luminous Intensity Group at Tj=25˚C
Luminous Intensity @
IV (mcd)
Brightness Group
U1
450.0 ... 560.0
U2
560.0 ... 715.0
V1
715.0 ... 900.0
V2
900.0 ... 1125.0
Luminous intensity is measured with an accuracy of ± 11%.
4
15/03/2010 V3.0
DOMINANT
TM
InGaN Warm White : DWF-UJG
Opto Technologies
Innovating Illumination
Forward Current Vs Forward Voltage
60
2.5
2
Forward Current, mA
Relative Intensity; Normalized at 30mA
Relative Intensity Vs Forward Current
1.5
1
0.5
40
30
20
10
0
0
0
10
20
30
40
50
60
70
80
90 100
2.5
3
3.5
4
4.5
Forward Current, mA
Forward Voltage, V
Maximum Forward Current Vs Temperature
Relative Intensity Vs Wavelength
1
35
0.9
30
0.8
Relative Intensity
Forward Current, mA
50
25
20
15
10
0.7
0.6
0.5
0.4
0.3
0.2
5
0.1
0
0
0
10
20
30
40
50
60
70
80
90 100
300
500
700
900
1100
Wavelength, nm
Ambient Temperature
Radiation Pattern
30°
20°
10°
0°
1.0
40°
0.8
50°
0.6
60°
0.4
70°
0.2
80°
90°
0
5
15/03/2010 V3.0
DOMINANT
TM
InGaN Warm White : DWF-UJG
Opto Technologies
Innovating Illumination
Power DomiLED • InGaN White : DWF-UJG Package Outlines
TM
Material
Material
Lead-frame
Cu Alloy With Ag Plating
Package
High Temperature Resistant Plastic, PPA
Encapsulant
Silicone Resin
Soldering Leads
Sn-Sn Plating
6
15/03/2010 V3.0
DOMINANT
TM
InGaN Warm White : DWF-UJG
Opto Technologies
Innovating Illumination
Recommended Solder Pad
7
15/03/2010 V3.0
DOMINANT
TM
InGaN Warm White : DWF-UJG
Opto Technologies
Innovating Illumination
Taping and orientation
• Reels come in quantity of 2000 units.
• Reel diameter is 180 mm.
8
15/03/2010 V3.0
DOMINANT
TM
InGaN Warm White : DWF-UJG
Opto Technologies
Innovating Illumination
Packaging Specification
9
15/03/2010 V3.0
DOMINANT
TM
InGaN Warm White : DWF-UJG
Opto Technologies
Innovating Illumination
Packaging Specification
Moisture sensitivity level
Barcode label
DOMINANT
ROHS Compliant
LOT NO : lotno
PB Free
PART NO : partno
QTY : product quantity per reel S/N : serial no D/C: date code
GROUP : group
Reel
Label
Moisture absorbent material +
Moisture indicator
The reel, moisture absorbent material and moisture indicator are
sealed inside the moisture proof foil bag
Average 1pc Power DomiLED
1 completed bag (2000pcs)
0.034
0.034
190 ± 10
190
10
Weight
Weight(gram)
(gram)
Cardboard
Box
DOMINANT TM
For Power DomiLED
Cardboard Box
Size
TM
Dimensions (mm)
Empty Box
Weight (kg)
Reel / Box
Quantity / Box (pcs)
Small
300 x 250 x 250
0.58
15 reels MAX
30,000 MAX
Large
416 x 516 x 476
1.74
96 reels MAX
192,000 MAX
10
15/03/2010 V3.0
DOMINANT
TM
InGaN Warm White : DWF-UJG
Opto Technologies
Innovating Illumination
Recommended Sn-Pb IR-Reflow Soldering Profile
Classification Reflow Profile (JEDEC J-STD-020C)
275
235-240˚C
10-30s
250
225
Temperature (˚C)
200
Ramp-up
3˚C/sec max.
183˚C
175
60-150s
150
125
Rampdown
6˚C/sec
max.
100
75
Preheat 60-120s
50
360s max
25
0
50
100
150
200
Recommended Pb-free Soldering Profile
Classification Reflow Profile (JEDEC J-STD-020C)
300
255-260˚C
10-30s
275
250
Temperature (˚C)
Ramp-up
3˚C/sec max.
217˚C
225
200
60-150s
175
150
125
Rampdown
6˚C/sec
max.
100
75
Preheat 60-180s
50
25
480s max
0
50
100
150
200
Time (sec)
11
15/03/2010 V3.0
DOMINANT
TM
InGaN Warm White : DWF-UJG
Opto Technologies
Innovating Illumination
Revision History
Page
Subjects
Date of Modification
-
Update to Official Version
3 Dec 2007
5
Add package drawing
30 Jun 2008
-
Update Company Name
15 Mar 2010
NOTE
All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT
Opto Technologies does not assume any liability arising out of the application or use of any product described herein.
DOMINANT Opto Technologies reserves the right to make changes at any time without prior notice to any products in
order to improve reliability, function or design.
DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies.
12
15/03/2010 V3.0
DOMINANT
TM
Opto Technologies
InGaN Warm White : DWF-UJG
Innovating Illumination
About Us
DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED
Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries
and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs
are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art
manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More
information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com.
Please contact us for more information:
Head Quarter
DOMINANT Opto Technologies Sdn. Bhd.
Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia
Tel: (606) 283 3566 Fax: (606) 283 0566
E-mail: [email protected]
DOMINANT Semiconductors Malaysia Sdn. Bhd. Shanghai Representative Office
DOMINANT Semiconductors (Shenzhen) Co. Ltd.
Rm 1007, DaZhong Building, No. 1515 Zhong Shan (W) Rd, Shanghai, China 200235
Tel: +86 21 6428 6428 Fax: +86 21 6428 6880
E-mail: [email protected]
DOMINANT Korea Sales Office
DOMINANT Semiconductors Korea Inc.
#709, Yatap Leaders Bldg., 342-1 Yatap-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-828 Korea.
Tel: +82-31-701-5203 Fax: +82-31-701-5204
E-mail: [email protected]
DOMINANT U.S.A Sales Office
25 Rockaway Road, 08833 Lebanon, New Jersey, USA
Tel: (908) 439-9930 Cell: (908) 343-5810 Fax: (908) 439-9929
E-mail: [email protected]
DOMINANT Europe Sales Office
DOMINANT Semiconductors Europe GmbH
Raiffeisenstr. 38, 74906 Bad Rappenau Germany
Tel: +49 (0) 7264-89010-10 / +49 (0) 7264-89010-11 Cell: +49 173-6907370 / +49 173-6907751
Fax: +49 (0) 7264-89010-29
E-mail: [email protected]; [email protected]
DOMINANT India Sales Office
C-11,Vasanth Business Centre #86, TTK Road, Alwarpet Chennai - 600 018, INDIA
Tel: 91-44-42030616 / 516 Cell: 91-9444920537 Fax: 91-9444920616
E-mail: [email protected]i.com
DOMINANT
Opto Technologies
Innovating Illumination
TM