AZ7671 SPDT SUBMINIATURE POWER RELAY FEATURES • • • • • • Small footprint Low cost Class B insulation standard Epoxy sealed version available 10 Amp switching UL, CUR file E44211 CONTACTS Arrangement SPST (1 Form A) SPDT (1 Form C) Ratings Resistive load: Max. switched power: 150 W 1250 VA Max. switched current: 10 A Max. switched voltage: 30* VDC or 277 VAC *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL, CUR TUV Material Resistance Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 5 A 240 VAC Res. Operate Time (typical) 8 ms at nominal coil voltage Release Time (typical) 5 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 4000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Insulation Resistance 1000 megohms min. at 20°C 500 VDC 50% RH Dropout Greater than 5% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage -40°C (-40°F) to 70°C (158°F) Storage 10 A at 125 VAC 5 A at 250 VAC 1/4 HP at 120/240/277 VAC TV-5 at 120 VAC 24 VA at 24 VAC 125 VA at 120/240/277 VAC C150 at 120 VAC -40°C (-40°F) to 130°C (266°F) Vibration 0.062" DA at 10–50 Hz Shock 100 g damage for 11 ms 1/2 sine pulse Enclosure P.B.T. polyester Terminals Tinned copper alloy, P. C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Silver cadmium oxide Max. Solvent Temp. 80°C (176°F) <100 milliohms initially (24 V, 1 A voltage drop method) Max. Immersion Time 30 seconds Weight 6 grams 5A at 250 VAC 5A at 28 VDC COIL NOTES Power 1. All values at 20°C (68°F). At Pickup Voltage (typical) 253 mW standard Max. Continuous Dissipation 1.25 W at 20°C (68°F) ambient Temperature Rise 41°C (74°F) at nominal coil voltage, standard Temperature GENERAL DATA 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. Max. 105°C (221°F) 4/23/10 AZ7671 RELAY ORDERING DATA STANDARD RELAYS COIL SPECIFICATIONS Nominal Coil VDC 3 Must Operate VDC 2.25 Max. Continuous VDC 3.9 ORDER NUMBER* Coil Resistance ± 10% 20 Form A (SPST) Form C (SPDT) AZ7671–1A–3D AZ7671–1C–3D 5 3.75 6.5 55 AZ7671–1A–5D AZ7671–1C–5D 6 4.5 7.8 80 AZ7671–1A–6D AZ7671–1C–6D 9 6.75 11.7 180 AZ7671–1A–9D AZ7671–1C–9D 12 9.0 15.6 320 AZ7671–1A–12D AZ7671–1C–12D 18 13.5 23.4 720 AZ7671–1A–18D AZ7671–1C–18D 24 18.0 31.2 1,280 AZ7671–1A–24D AZ7671–1C–24D * Add suffix “E” for epoxy sealed version. MECHANICAL DATA PC BOARD LAYOUT .059 [1.50] .073 [1.85] .417 MAX. [10.59] .740 MAX. [18.80] .100 [2.54] .058 [1.49] .300 [7.62] 5xø.052 - FORM C 4xø.052 - FORM A [ø1.3] .441 [11.20] FORM C ONLY VIEWED TOWARD TERMINALS WIRING DIAGRAM .614 MAX. [15.59] .147 [3.73] 5 1 .073 [1.85] 4 2 3 FORM C ONLY VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 4/23/10