AZ9405 10 AMP MINIATURE POWER RELAY FEATURES • • • • • • • 10 Amp switching capability SPST-N.O. and SPDT configurations 4 kV dielectric strength Epoxy sealed version available Class F insulation system standard UL, CUR file E44211 TUV R50290833 CONTACTS Arrangement Ratings UL, CUR (N.O.) (N.C.) TUV Material Resistance GENERAL DATA SPST N.O. (1 Form A) SPDT (1 Form C) Life Expectancy Mechanical Electrical Minimum operations 5 x 106 1 x 105 at 10 A 120 VAC Res. Max. switched power: 150 W or 1400 VA N.O. 90 W or 850 VA N.C. Max. switched current:10 A N.O., 3 A N.C.. Max. switched voltage: 30 VDC or 277 VAC Operate Time (max.) 10 ms at nominal coil voltage, standard 15 ms at nominal coil voltage, sensitive Release Time (max.) 5 ms at nominal coil voltage (with no coil suppression) 10 A at 125 VAC, Res., 100k cycles, 85°C 5 A at 277 VAC, Res., 100k cycles, 85°C 5 A at 30 VDC, Res., 100k cycles, 85°C 1/10 HP at 125 VAC, 100k cycles, 85°C 1/10 HP at 250 VAC, 100k cycles, 85°C Dielectric Strength 1000 Vrms contact to contact (at sea level for 1 min.) 4000 Vrms contact to coil Resistive load: 3 A at 277 VAC Res., 100k cycles, 85°C 3 A at 30 VDC Res., 100k cycles, 85°C 5A NO / 3A NC @ 277VAC; cos phi=1, 100k cycles, 85°C 5A NO / 3A NC @ 30VDC; L/R=0ms, 100k cycles, 85°C 5A NO @ 277VAC; cos phi=1, 100k cycles, 85°C 10A NO @ 125VAC; cos phi=1, 100k cycles, 85°C Insulation Resistance 1 x 109 ohms minimum at 500 VDC Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage -40°C (-40°F) to 85°C (185°F) Storage Vibration COIL Power 0.062" DA at 10–55 Hz Shock Operating Silver tin oxide < 0.1 Ohm (24 V, 1 A voltage drop method) -40°C (-40°F) to 105°C (221°F) Mechanical 10 g for 11 ms 1/2 sine pulse (no contact opening >100 usec) 100 g for 11 ms 1/2 sine pulse Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) At Pickup Voltage (typical) 196 mW (Standard Coil) 113 mW (Sensitive Coil) Max. Immersion Time 30 seconds Max. Continuous Dissipation 676 mW at 20°C (68°F) Weight 7 grams Temperature Rise 42°C (76°F) (Standard Coil) 24°C (44°F) (Sensitive Coil) NOTES Temperature Max. 155°C (311°F) 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 3/18/15 AZ9405 RELAY ORDERING DATA ORDER NUMBER* COIL SPECIFICATIONS – Standard Coil (SPDT and SPST) Nominal Coil VDC 3 Must Operate VDC 2.1 Max. Continuous VDC 3.9 5 3.5 6.5 6 4.2 7.8 Coil Resistance ± 10% 22.5 SPDT SPST-NO AZ9405–1A–3DF AZ9405-1C-3DF 62.5 AZ9405–1A–5DF AZ9405-1C-5DF 90 AZ9405–1A–6DF AZ9405-1C-6DF AZ9405-1C-9DF 9 6.3 11.7 202.5 AZ9405–1A–9DF 12 8.4 15.6 360 AZ9405–1A–12DF AZ9405-1C-12DF 18 12.6 23.4 810 AZ9405–1A–18DF AZ9405-1C-18DF 24 48 16.8 33.6 31.2 62.4 1440 5760 AZ9405–1A–24DF AZ9405-1A-48DF AZ9405-1C-24DF AZ9405-1C-48DF *Add suffix “E” for sealed version. ORDER NUMBER* COIL SPECIFICATIONS – Sensitive Coil (SPST) Nominal Coil VDC 3 Must Operate VDC 2.3 Max. Continuous VDC 3.9 Coil Resistance ± 10% 45 AZ9405-1A-3DSF AZ9405-1A-3DSEF 5 3.8 6.5 125 AZ9405–1A–5DSF AZ9405-1A-5DSEF 6 4.5 7.8 180 AZ9405–1A–6DSF 9 6.8 11.7 400 AZ9405–1A–9DSF AZ9405-1A-9DSEF 12 9.0 15.6 720 AZ9405–1A–12DSF AZ9405-1A-12DSEF 18 13.5 23.4 1620 AZ9405–1A–18DSF AZ9405-1A-18DSEF 24 18.0 31.2 2800 AZ9405–1A–24DSF AZ9405-1A-24DSEF Unsealed Sealed AZ9405-1A-6DSEF MECHANICAL DATA PC BOARD LAYOUT .043 [1.10] .400 [10.16] .300 [7.62] .045 [1.15] .300 [7.62] 5 x ø.051 [ø1.3] .100 [2.54] WIRING DIAGRAM FORM A FORM C VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 3/18/15