SMD Wire-wound Chip Inductors CT1210LSCF Series From 0.47 µH to 680 µH SPECIFICATIONS Please specify tolerance code when ordering. CT1210LSCF-1R0_ J = ±5%, K = ±10% Part Inductance Number (µH) CT1210LSCF-R47_ 0.47 L Test Freq. (MHz) 25.2 Q Fact. Min. 40 Q Test Freq. (MHz) 25.2 SRF Min. (MHz) 450 DCR ±30% (W) 0.07 Rated DC (mA) 1800 CT1210LSCF-1R0_ CT1210LSCF-1R5_ CT1210LSCF-1R8_ CT1210LSCF-2R2_ CT1210LSCF-2R7_ CT1210LSCF-3R3_ CT1210LSCF-4R7_ CT1210LSCF-5R6_ CT1210LSCF-6R8_ CT1210LSCF-8R2_ 1.0 1.5 1.8 2.2 2.7 3.3 4.7 5.6 6.8 8.2 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 20 20 20 20 20 20 20 20 20 15 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 100 80 70 68 62 54 43 36 33 28 0.08 0.11 0.13 0.13 0.15 0.16 0.20 0.26 0.27 0.33 1500 1125 970 970 900 837 675 620 600 570 CT1210LSCF-100_ CT1210LSCF-150_ CT1210LSCF-180_ CT1210LSCF-220_ CT1210LSCF-270_ CT1210LSCF-330_ CT1210LSCF-470_ CT1210LSCF-680_ 10 15 18 22 27 33 47 68 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 15 15 15 15 15 15 15 15 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 28 19 17 16 13 12 10 9 0.36 0.56 0.67 0.77 1.00 1.10 1.64 2.8 520 480 330 310 280 270 210 189 CT1210LSCF-101_ CT1210LSCF-151_ CT1210LSCF-181_ CT1210LSCF-221_ CT1210LSCF-331_ CT1210LSCF-471_ CT1210LSCF-681_ 100 150 180 220 330 470 680 0.796 0.796 0.796 0.796 0.796 0.796 0.796 15 15 15 15 15 15 15 0.796 0.796 0.796 0.796 0.796 0.796 0.796 6 5 4 4 3.5 2.8 2 3.7 6.1 8.0 8.4 12 22 28 145 120 105 100 80 75 65 Not Shown at Actual Size PHYSICAL DIMENSIONS Size A Max. CHARACTERISTICS Description: SMD ferrite core wire-wound chip inductor. Applications: LC resonant circuits such as oscillator and signal generators, impedance matching, circuit isolation, RF filters, disk drives and computer peripherals, audio and video equipment, TV, radio and telecommunication equipment. Operating Temperature: -25°C to +85°C Inductance Tolerance: ±5% & ±10% Testing: Inductance and Q are tested on an HP4285A at specified frequency. Packaging: Tape & Reel. Miscellaneous: RoHS Compliant. Marking: Parts are marked with color dots in nano Henries. Example: 10µH = 10000nH marking would be Brown, Black, Orange(103). Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. www.ctparts.com mm inches B Max. C Max. D E F 3.70 2.90 2.6 0.51 0.51 1.52 0.146 0.114 0.102 0.019 0.019 0.060 B C Overall E A F E D Terminal Wraparound 0.38mm(0.015“) Both Ends PAD LAYOUT Unit: mm (inch) Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2012 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice REV 09.01.05