DIMM 100 Pin Socket DIMM-100 Series OUTLINE DMM series is DIMM socket which is conforming to JEDEC. It is applied to memory modules for laser printer, facsimile and other peripherals. Conforming S ta n d a r d FEATURES JEDEC ● Applicable memory modules are 100pins of 1.27mm pitch which conforms to JEDEC. ● Mating area of contacts are boat-shaped and it performs excellent contact stability against contamination. ● It is available on the memory modules of operating voltage 3.3V. ● Push levers help ejection and locking the memory module easily and it is full-lock type. SPECIFICATIONS Rated Voltage AC250V（r.m.s.) Rated Current 0.5A / contact Dielectric Withstand Voltage 500VAC(r.m.s.)/ 1 minute Insulation Resistance 500M Ω at 500VDC Contact Resistance 40 m Ω max. MATERIAL/FINISH Item RoHS Compliant Compliant Material / Finish Contact Copper Alloy / Contact Area Au plating, Tail Area Au(Flash) plating Insulator 46 Nylon（UL94V-0) / Black Eject lever 46 Nylon（UL94V-0)/ Black ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 140305 http://www.ddknet.co.jp DMM-100 Series Unit：mm ○ DIMM Memory Socket DMM-100G-433FNK31-FG FG：Lead free Tail Area Au(flash) over Ni plating Number of pin Connector Style(Key position) G：25.68, 1.26 Package Style K31：Tube Package Tail Height 4：2.60 Connector Lock N：No board lock Tail Pitch 3：1.905mm Ejector Style F：Full-lock Ejector Contact Plating(Mating Area) 1：Mating Area Au（0.76 μ）over Ni plating 2：Mating Area Au (0.38 μ）over Ni plating 3：Mating Area Au(Flash) over Ni plating 121.20 max. 104.50 max. 90.54 85.37 25.68 15.93 24.55 19.28 1.26 0.40 6.35 A 34.29 19.05 78.74 69.22 3.18 43.82 97.74 2.49 0.60 5.80 3.30 1.40 0.25 1.905 REF. 1.905 5.72 7.30 Section A-A ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 3.85 2.60 A DMM-100 Series Unit：mm ○ Recommended P.C.B Pattern Lay-out φ0.10 C D 4 1.27 0. 05 34.29 6.35 φ 2. 4 19.05 6.35 6.35 D 1.00 8.35 02 1.00 1.00 1.00 φ 1. 1.00 1.00 0. 05 φ0.10 C D 36.29 21.05 （Pattern and via hole prohibition area) 78.74 C ○ Applicable Memory Module Dimensions φ0.10 E F 6.35 6.35 19.05 4.00 0.10 6.35 34.29 17.78 0.25 max. 2.54 min. E 1.27 F No.50 1.26 0.10 X 2.99 min. 25.68 0.10 90.17 φ0.15 E F No.100 1.27 6.35 6.35 19.05 0.99 0.05 34.29 6.35 φ0.10 E F 0.25 3.00 min. 2.54 min. 0.25 max. No.51 Full R 2.00 0.10 φ0.10 E F 30 Detail Y(5/1) Detail X(5/1) ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 3 1.27 0.10 No. 1 Y