Data Sheet SMLV56 Series SRGB2 3528 （1411） 3.5×2.8mm （t=0.6mm） Features ・High Brightness Tri-Color LEDs ・Low height and improved color mixture made possible Color Type by flat frame structure. R G B Product Specifications Absolute Maximum Ratings (Ta＝25℃) Electrical and Optical Characteristics (Ta＝25℃) Emitting Power Chip Forward Voltage VF Reverse Current IR Dominant Wavelength λD Luminous Intensity IV Forward Peak Forward Reverse Operating Storage Structure Color Dissipation Current Current Voltage Temperature Temperature Max. Min. Typ. Min.*1 Typ. Max.*1 PD(mW) IF(mA) IFP(mA) VR(V) Topr(℃) Tstg(℃) Typ.(V) IF(mA) (μA) VR(V) (nm) (nm) (nm) IF(mA) (mcd) (mcd) IF(mA) AlGaInP Red 50 2.1 10 5 619 624 629 450 700 on Si Part No. ■ ■ SMLV56RGB1W InGaN on SiC ■ Green 400 100 5 -40 to +85 -40 to +100 40 20 3.3 - 520 527 535 465 470 475 20 710 1200 220 400 20 - Blue ＊1=Reference Chromaticity Coordinates Electrical and Optical Characteristics (Ta＝25℃) Chromaticity Coordinates Luminous intensity IV Min. Typ. IF(mA) (x, y) IF(mA) (mcd) (mcd) (0.30, 0.30) 0.35 (R)12 1 CIE y (R)12 Chromaticity Diagram (When lit as white) (G)15 1100 1700 (G)15 (B)12 5 2 0.30 6 3 (B)12 4 7 IF=12(R) 15(G) 12(B) (mA) 8 0.25 0.20 0.25 0.30 0.35 0.40 CIE x Dimensions Recommended Solder Pattern Viewing Angle (deg) SCANNING ANGLE Directivity (deg) X−Y 3.1 Anode mark 20° B 10° 0° 10° 30° 40° 40° 50° 50° B ZD R G ⑤ ① ② ③ B R G ⑥ ⑤ ④ 60° 60° 70° 70° 80° 80° ④ 3.5 ±0.1 90° 100 50 0 90° 100 50 RELATIVEINTENSITY INTENSITY (%) (%) RELATIVE (deg) SCANNING ANGLE Directivity (deg) X’−Y’ 0.6 ±0.1 ③ ② ⑥ ZD 2.8 ① 20° B G R 10° 0° 30° 10° 30° 40° 50° 50° 60° 60° (1.9) 70° © 2010 ROHM Co., Ltd. All rights reserved. 80° 80° Tolerance : ±0.2 （unit : mm） （unit : mm） 1/3 90° 100 Red(R) Green(G)/ Blue(B) 20° 40° 70° www.rohm.com Red(R) Green(G) Blue(B) 20° 30° G R 50 0 50 90° 100 RELATIVEINTENSITY INTENSITY (%) (%) RELATIVE 2010.06 - Rev.B SMLV56 Series Electrical Characteristics Curves Forward Current-Forward Voltage Ta=25°C FORWARD CURRENT：IF (mA) 100 ■ ■ ■ ■SMLV56RGB1W(R) ■SMLV56RGB1W(G) ■SMLV56RGB1W(B) 10 1 1.0 2.0 3.0 5.0 4.0 FORWARD VOLTAGE：VF (V) Luminous Intensity-Atmosphere Temperature IF=20mA RELATIVE LUMINOUS INTENSITY (a.u.) 1.4 ■ ■ ■SMLV56RGB1W(R) ■SMLV56RGB1W(G) ■SMLV56RGB1W(B) 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 -40 -20 0 10 20 40 60 80 100 ATMOSPHERE TEMPERATURE：Ta (°C) Luminous Intensity-Forward Current Ta=25°C RELATIVE LUMINOUS INTENSITY (a.u.) 2.5 ■ ■ ■ ■SMLV56RGB1W(R) ■SMLV56RGB1W(G) ■SMLV56RGB1W(B) ■ ■SMLV56RGB1W(R) ■SMLV56RGB1W(G) ■SMLV56RGB1W(B) 2.0 1.5 1.0 0.5 0 0 10 20 30 40 50 FORWARD CURRENT：IF (mA) MAXIMUM FORWARD CURRENT：IF (mA) Derating Ta=25°C 60 50 40 30 20 10 0 -40 -20 0 20 40 60 80 100 AMBIENT TEMPERATURE：Ta (°C) www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. 2/3 2010.06 - Rev.B SMLV56 Series Rank Reference of Brightness SMLV56RGB1W Package size (mm) Height (mm) Chip LEDs with 3528 Reflector Luminous Intensity Emitting Color Red Green Blue White 0.6 (mcd) （Ta=25˚C, IF＝20mA） Y＊ 220 to 280 280 to 360 355 to 460 450 to 560 560 to 710 710 to 900 900 to 1100 1100 to 1400 1400 to 1800 1800 to 2200 R G B WB ＊When lighting three colors simultaneously <to express white light> Part No. Construction #HROMATICITYRANK 7HENLIGHTINGTHREECOLORSSIMULTANEOUSLYTOEXPRESSWHITELIGHT S M L V 5 6 3ERIESNAME 0ACKAGENAME R G B 1 W 1 #HIP4YPE 5LTRA(IGH"RIGHTNESS4YPE 3PECIAL#ODE 2ESIN#OLOR 4APING3PECIFICATIONS Brightness rank∗ 7HENLIGHTINGTHREECOLORSSIMULTANEOUSLY TOEXPRESSWHITELIGHT %MITTING#OLOR R 2 Y 7 2EDNM -ILKY7HITE 1 #ATHODEATSPROCKETHOLESIDE G 'REENNM B "LUENM ∗ Concerning the Brightness rank s0LEASEREFERTOTHERANKCHARTABOVEFORLUMINOUSINTENSITYCLASSIFICATION s0LEASEREFERTOTHE#HROMATICITYDIAGRAMFORCOLORCLASSIFICATION s0ARTNAMEISINDIVIDUALFOREACHRANK s7HENSHIPPEDASSAMPLETHEPARTNAMEWILLBEAREPRESENTATIVEPARTNAME 'ENERALPRODUCTSAREFREEOFRANKS0LEASECONTACTSALESIFRANKAPPOINTMENTISNEEDED Packing Specification ROHM LED products are being shipped with desiccant (silica gel) concluded in moisture-proof bags. Pasting the moisture sensitive label on the outer surface of the moisture-proof bags or enclosing the humidity indication card inside the bag is available upon request. Please contact the nearest sales office or distributer if necessary. www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. 3/3 2010.06 - Rev.B Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. R1010A