Reflectors for Cree® LMH2 LED Modules Product Guide White Finish Diffuse Finish Semi-Specular Finish Faceted, Specular Finish Product Description Features Table of Contents Cree LED modules provide lighting • 4‑in/110‑mm, 6‑in/150‑mm and 4-in/110‑mm Reflectors........................................2 designers simple, and manufacturers easy‑to‑adopt solutions that LED reduce development time time‑to‑market. Cree and with lighting luminaire speed • Diffuse, white, semi‑specular and faceted, specular finishes Mechanical Dimensions...................................2 Reflector Photometry........................................2 Circular Reflector, Diffuse Finish..................3 Circular Reflector, White Finish.....................3 are Circular Reflector, Semi‑Specular Finish......4 specifically designed to work with the Spot Reflector, Faceted, Specular Finish......4 Cree LMH2 LED modules to jump‑start 6-in/150‑mm Reflectors........................................6 the design process reflectors 8‑in/190‑mm sizes for recessed Mechanical Dimensions...................................6 downlights, wall sconces and pendant Reflector Photometry........................................6 lights in demanding end markets such Circular Reflector, White Finish.....................7 as retail, museums, hospitality and restaurants. CLM-DG07 Rev 0C Product Guide Circular Reflector, Semi‑Specular Finish......7 8-in/190‑mm Reflectors........................................8 Mechanical Dimensions...................................8 Reflector Photometry........................................8 Circular Reflector, White Finish.....................9 Circular Reflector, Semi‑Specular Finish......9 www.cree.com/modules Packaging............................................................10 Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 1 Reflectors for LMH2 LED Modules 4-in/110‑mm Reflectors Order Codes Description Finish Order Code Diffuse LMH020-REFL-0000-0000045 White LMH020-REFL-0000-0000044 Semi-specular LMH020-REFL-0000-0000042 Faceted specular LMH020-REFL-0000-0000046 4-in/110‑mm circular reflector 4-in/110‑mm spot reflector Mechanical Dimensions1 [2.5] Ø .10 A A [40.5] R 1.59 [87.9] [87.9] Ø 3.46 3.46 [57.4] [57.4] 2.26 Ø 2.26 [61.5] 2.42 [107.7] Ø 4.24 [139.7] Ø 5.50 Reflector Photometry The candela values for an LMH2 LED module with a particular reflector, and the values for the corresponding polar graph, can be approximated by applying the following multiplication factors to the tables and graphs in the following sections. The exact candela values can be found in the IES files available on the Cree website.2 LMH2 LED Module Multiplication factor 850 lm 1250 lm 2000 lm 3000 lm 4000 lm 6000 lm 8000 lm 0.283 0.417 03.667 1.000 1.333 2.000 2.667 1 Dimensions for the reflector diagrams are for reference only. For exact dimensions and tolerances, refer to the 3-D models (.STEP files) for the reflectors available on the LMH2 product page and the diffuse, white, semi‑specular and specular reflector product pages. Select the Documentation tab, then select the STEP files under the Design Files heading. 2 Select the Documentation tab on the LMH2 product page, then select the IES file under the Design Files heading. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. 2 Reflectors for LMH2 LED Modules 4-in/110‑mm Circular Reflector, Diffuse Finish The following table and graph show the candela tabulation for the 3000‑lumen flat lens LMH2 LED module with the 4-in/110‑mm circular reflector with a diffuse finish. Angle from Nadir (°) Candelas 0.0 2073.4 2.5 Angle from Nadir (°) Candelas Angle from Nadir (°) Candelas 2065.1 32.5 934.0 62.5 64.4 5.0 2041.1 35.0 741.6 65.0 53.8 7.5 2002.9 37.5 577.2 67.5 44.3 10.0 1953.7 40.0 445.4 70.0 35.8 12.5 1892.6 42.5 345.7 72.5 28.3 15.0 1822.6 45.0 266.9 75.0 21.7 17.5 1745.0 47.5 203.9 77.5 16.0 20.0 1662.5 50.0 154.7 80.0 11.1 22.5 1579.9 52.5 122.9 82.5 7.0 25.0 1473.5 55.0 103.2 85.0 3.5 27.5 1319.9 57.5 89.2 87.5 0.9 30.0 1135.1 60.0 76.2 90.0 0.2 518 1037 1555 2073 4-in/110‑mm Circular Reflector, White Finish The following table and graph show the candela tabulation for the 3000‑lumen flat lens LMH2 LED module with the 4-in/110‑mm circular reflector with a white finish. Angle from Nadir (°) Candelas 0.0 1865.4 2.5 Angle from Nadir (°) Candelas Angle from Nadir (°) Candelas 1859.2 32.5 913.4 62.5 138.7 5.0 1841.5 35.0 738.2 65.0 124.7 7.5 1812.5 37.5 588.6 67.5 110.7 10.0 1774.8 40.0 470.1 70.0 96.8 12.5 1728.7 42.5 382.5 72.5 83.0 15.0 1676.6 45.0 314.8 75.0 69.5 17.5 1618.8 47.5 261.4 77.5 56.3 20.0 1556.2 50.0 220.1 80.0 43.2 22.5 1491.7 52.5 194.5 82.5 30.2 25.0 1403.7 55.0 179.4 85.0 17.2 27.5 1266.9 57.5 166.6 87.5 5.5 30.0 1097.9 60.0 152.8 90.0 0.6 466 933 1399 1865 Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. 3 Reflectors for LMH2 LED Modules 4-in/110‑mm Circular Reflector, Semi‑Specular Finish The following table and graph show the candela tabulation for the 3000‑lumen flat lens LMH2 LED module with the 4-in/110‑mm circular reflector with a semi‑specular finish. Angle from Nadir (°) Candelas 0.0 3510.3 2.5 Angle from Nadir (°) Candelas Angle from Nadir (°) Candelas 3500.2 32.5 989.3 62.5 1.8 5.0 3454.0 35.0 703.5 65.0 1.5 7.5 3368.6 37.5 489.0 67.5 1.3 10.0 3217.0 40.0 327.7 70.0 1.1 12.5 3013.8 42.5 209.5 72.5 0.9 15.0 2807.9 45.0 121.5 75.0 0.7 17.5 2582.7 47.5 61.1 77.5 0.6 20.0 2351.2 50.0 25.8 80.0 0.4 22.5 2146.8 52.5 8.6 82.5 0.3 25.0 1920.0 55.0 3.1 85.0 0.2 27.5 1639.8 57.5 2.5 87.5 0.1 30.0 1317.4 60.0 2.1 90.0 0.1 878 1755 2633 3510 4-in/110‑mm Spot Reflector, Faceted, Specular Finish The following table and graph show the candela tabulation for the 3000‑lumen flat lens LMH2 LED module with the 4-in/110‑mm spot reflector with a faceted, specular finish. Angle from Nadir (°) Candelas 0.0 7595.5 2.5 Angle from Nadir (°) Candelas Angle from Nadir (°) Candelas 7296.8 32.5 634.8 62.5 0.5 5.0 6562.5 35.0 415.3 65.0 0.4 7.5 5533.0 37.5 265.4 67.5 0.3 10.0 4535.5 40.0 161.7 70.0 0.2 12.5 3757.2 42.5 90.8 72.5 0.2 15.0 3171.1 45.0 41.7 75.0 0.2 17.5 2705.4 47.5 17.6 77.5 0.1 20.0 2294.5 50.0 6.1 80.0 0.1 22.5 1927.3 52.5 1.9 82.5 0.1 25.0 1587.2 55.0 1.0 85.0 0.1 27.5 1244.3 57.5 0.8 87.5 0.2 30.0 913.0 60.0 0.6 90.0 0.2 1899 3798 5697 7596 Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. 4 Reflectors for LMH2 LED Modules The following table and graph show the candela tabulation for the 3000‑lumen dome lens LMH2 LED module with the 4-in/110‑mm spot reflector with a faceted, specular finish. Angle from Nadir (°) Candelas 0.0 3937.3 2.5 Angle from Nadir (°) Candelas Angle from Nadir (°) Candelas 3868.6 32.5 919.6 62.5 0.6 5.0 3695.2 35.0 707.3 65.0 0.5 7.5 3440.2 37.5 536.9 67.5 0.4 10.0 3144.7 40.0 404.1 70.0 0.3 12.5 2842.8 42.5 298.6 72.5 0.2 15.0 2551.5 45.0 213.8 75.0 0.2 17.5 2286.7 47.5 148.7 77.5 0.2 20.0 2045.1 50.0 97.8 80.0 0.1 22.5 1820.1 52.5 57.8 82.5 0.1 25.0 1602.2 55.0 29.6 85.0 0.2 27.5 1381.1 57.5 11.4 87.5 0.3 30.0 1153.3 60.0 2.4 90.0 0.4 984 1969 2953 3937 Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. 5 Reflectors for LMH2 LED Modules 6-in/150‑mm Reflectors Order Codes Description 6-in/150‑mm circular reflector Finish Order Code White LMH020-REFL-0000-0000064 Semi-specular LMH020-REFL-0000-0000062 Mechanical Dimensions3 [1.8] R 0.07 [1.8] R 0.07 [3.5] R 0.14 [3.5] R 0.14 A B A A B DETAIL B A DETAIL B SCALE 2:1 SCALE 2:1 [81] Ø 3.19 [81] Ø 3.19 [93.9] Ø 3.70 [93.9] [66.7] Ø 3.70 Ø 2.63 [66.7] Ø 2.63 [84.5] 3.33 [84.5] 3.33 [149.9] Ø 5.90 [149.9] [184.1] Ø 5.90 Ø 7.50 [184.1] Ø 7.50 Reflector Photometry The candela values for an LMH2 LED module with a particular reflector, and the values for the corresponding polar graph, can be approximated by applying the following multiplication factors to the tables and graphs in the following sections. The exact candela values can be found in the IES files available on the Cree website.4 LMH2 LED Module Multiplication factor 850 lm 1250 lm 2000 lm 3000 lm 4000 lm 6000 lm 8000 lm 0.283 0.417 03.667 1.000 1.333 2.000 2.667 3 Dimensions for the reflector diagrams are for reference only. For exact dimensions and tolerances, refer to the 3-D models (.STEP files) for the reflectors available on the LMH2 product page and the white and semi‑specular reflector product pages. Select the Documentation tab, then select the STEP files under the Design Files heading. 4 Select the Documentation tab on the LMH2 product page, then select the IES file under the Design Files heading. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. 6 Reflectors for LMH2 LED Modules 6-in/150‑mm Circular Reflector, White Finish The following table and graph show the candela tabulation for the 3000‑lumen flat lens LMH2 LED module with the 6-in/150‑mm circular reflector with a white finish. Angle from Nadir (°) Candelas 0.0 1837.4 2.5 Angle from Nadir (°) Candelas Angle from Nadir (°) Candelas 1832.6 32.5 1103.3 62.5 159.8 5.0 1817.7 35.0 876.1 65.0 144.0 7.5 1793.1 37.5 667.1 67.5 127.4 10.0 1759.5 40.0 498.2 70.0 111.4 12.5 1720.0 42.5 386.0 72.5 95.0 15.0 1673.1 45.0 306.0 75.0 79.6 17.5 1625.2 47.5 253.5 77.5 64.0 20.0 1571.8 50.0 227.3 80.0 49.2 22.5 1518.2 52.5 215.9 82.5 34.2 25.0 1460.0 55.0 204.3 85.0 20.0 27.5 1398.0 57.5 190.5 87.5 6.5 30.0 1288.4 60.0 175.7 90.0 0.4 459 919 1378 1837 6-in/150‑mm Circular Reflector, Semi‑Specular Finish The following table and graph show the candela tabulation for the 3000‑lumen flat lens LMH2 LED module with the 6-in/150‑mm circular reflector with a semi‑specular finish. Angle from Nadir (°) Candelas 0.0 3414.7 2.5 Angle from Nadir (°) Candelas Angle from Nadir (°) Candelas 3407.8 32.5 1282.1 62.5 1.5 5.0 3339.8 35.0 925.0 65.0 1.2 7.5 3177.4 37.5 599.8 67.5 1.0 10.0 3002.6 40.0 361.4 70.0 0.8 12.5 2845.9 42.5 192.0 72.5 0.7 15.0 2705.6 45.0 84.7 75.0 0.6 17.5 2564.5 47.5 28.7 77.5 0.4 20.0 2442.5 50.0 6.5 80.0 0.3 22.5 2315.0 52.5 3.6 82.5 0.3 25.0 2170.7 55.0 2.8 85.0 0.2 27.5 1927.7 57.5 2.3 87.5 0.1 30.0 1653.1 60.0 1.8 90.0 0.1 854 1707 2561 3415 Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. 7 Reflectors for LMH2 LED Modules 8-in/190‑mm Reflectors Order Codes Description 8-in/190‑mm circular reflector Finish Order Code White LMH020-REFL-0000-0000084 Semi-specular LMH020-REFL-0000-0000082 Mechanical Dimensions5 [81] [81] Ø 3.19 Ø 3.19 [81] [81] Ø 3.19 [1.8] [1.8] R 0.07 R 0.07 [3.5] [1.8] [3.5] R 0.14 R 0.07 [1.8] R 0.14 [3.5] R 0.07 [3.5] R 0.14 Ø 3.19 B B A A A A B A B A R 0.14 A A DETAIL B DETAIL SCALE B 4:1 SCALE 4:1 DETAIL B 4:1 DETAIL SCALE B SCALE 4:1 [109.4] [109.4] Ø 4.31 Ø[66.7] 4.31 [109.4] [66.7] Ø 2.63 [109.4] Ø 2.63Ø 4.31 Ø 4.31 [66.7] [66.7] Ø 2.63 Ø 2.63 [188.7] [188.7] Ø 7.43 Ø 7.43 [228.6] [188.7] [228.6] Ø 9.00 Ø 7.43 [188.7] Ø 9.00 [228.6] Ø 7.43 Ø [228.6] 9.00 [104.9] [104.9] 4.13 4.13 [104.9] [104.9] 4.13 4.13 Ø 9.00 Reflector Photometry The candela values for an LMH2 LED module with a particular reflector, and the values for the corresponding polar graph, can be approximated by applying the following multiplication factors to the tables and graphs in the following sections. The exact candela values can be found in the IES files available on the Cree website.6 LMH2 LED Module Multiplication factor 850 lm 1250 lm 2000 lm 3000 lm 4000 lm 6000 lm 8000 lm 0.283 0.417 03.667 1.000 1.333 2.000 2.667 5 Dimensions for the reflector diagrams are for reference only. For exact dimensions and tolerances, refer to the 3-D models (.STEP files) for the reflectors available on the LMH2 product page and the white and semi‑specular reflector product pages. Select the Documentation tab, then select the STEP files under the Design Files heading. 6 Select the Documentation tab on the LMH2 product page, then select the IES file under the Design Files heading. Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. 8 Reflectors for LMH2 LED Modules 8-in/190‑mm Circular Reflector, White Finish The following table and graph show the candela tabulation for the 3000‑lumen flat lens LMH2 LED module with the 8-in/190‑mm circular reflector with a white finish. Angle from Nadir (°) Candelas 0.0 1826.2 2.5 Angle from Nadir (°) Candelas Angle from Nadir (°) Candelas 1821.5 32.5 1242.6 62.5 155.4 5.0 1807.4 35.0 1061.6 65.0 140.4 7.5 1783.7 37.5 814.0 67.5 125.1 10.0 1752.0 40.0 580.5 70.0 109.5 12.5 1713.0 42.5 418.0 72.5 93.8 15.0 1668.2 45.0 308.8 75.0 78.5 17.5 1619.6 47.5 243.6 77.5 63.5 20.0 1566.8 50.0 214.7 80.0 48.8 22.5 1512.0 52.5 204.6 82.5 34.1 25.0 1454.3 55.0 194.6 85.0 19.9 27.5 1393.9 57.5 183.1 87.5 6.7 30.0 1328.9 60.0 169.7 90.0 0.4 457 913 1370 1826 8-in/190‑mm Circular Reflector, Semi‑Specular Finish The following table and graph show the candela tabulation for the 3000‑lumen flat lens LMH2 LED module with the 8-in/190‑mm circular reflector with a semi‑specular finish. Angle from Nadir (°) Candelas 0.0 3176.6 2.5 Angle from Nadir (°) Candelas Angle from Nadir (°) Candelas 3176.6 32.5 1381.3 62.5 0.1 5.0 3179.9 35.0 1039.6 65.0 0.0 7.5 3173.9 37.5 688.6 67.5 0.0 10.0 3099.6 40.0 386.1 70.0 0.0 12.5 2948.9 42.5 186.2 72.5 0.0 15.0 2763.9 45.0 81.9 75.0 0.0 17.5 2603.4 47.5 21.5 77.5 0.0 20.0 2435.4 50.0 2.3 80.0 0.0 22.5 2216.5 52.5 1.2 82.5 0.0 25.0 2056.1 55.0 0.8 85.0 0.0 27.5 1891.8 57.5 0.5 87.5 0.0 30.0 1658.0 60.0 0.2 90.0 0.0 795 1590 2385 3180 Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. 9 Reflectors for LMH2 LED Modules Packaging Reflectors are packaged in boxes of 10, which are then combined in cartons as shown below. Box and carton sizes are as follows. Box of 10 4-in/110‑mm reflectors: 155 x 155 x 380 mm Carton of 20 4-in/110‑mm reflector boxes, 200 4‑inch/110‑mm reflectors: 850 x 690 x 440 mm Box of 10 6-in/150‑mm reflectors: 205 x 205 x 350 mm Carton of 6 6-in/150‑mm reflector boxes, 60 6‑inch/150‑mm reflectors: 680 x 470 x 410 mm Box of 10 8-in/190‑mm reflectors: 245 x 245 x 380 mm Carton of 6 8-in/190‑mm reflector boxes, 60 8‑inch/190‑mm reflectors: 800 x 550 x 440 mm Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® is a registered trademark and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. 10