RoHS Power Chip Inductors Dimensions: PC45 Inches (mm) 0.354±0.019 0.197±0.02 0.157±0.12 (8.99±0.48) (5.00±0.51) (3.99±0.51) .531 MAX. (13.49) 0.393±0.014 (9.98±0.36) 0.118±0.008 (3.00±0.20) Allied Part Number Inductance (µh) Tolerance (%) Test Freq. (MHz) DCR Max. (Ω) *Rated Current (A) PC45-100M-RC 10 20 2.52 0.06 2.60 PC45-120M-RC 12 20 2.52 0.07 2.45 PC45-150M-RC 15 20 2.52 0.08 2.27 PC45-180M-RC 18 20 2.52 0.09 2.15 PC45-220M-RC 22 20 2.52 0.10 1.95 PC45-270M-RC 27 20 2.52 0.11 1.76 PC45-330M-RC 33 20 2.52 0.12 1.50 PC45-390M-RC 39 20 2.52 0.14 1.37 PC45-470K-RC 47 10 2.52 0.17 1.28 PC45-560K-RC 56 10 2.52 0.19 1.17 PC45-680K-RC 68 10 2.52 0.22 1.11 PC45-820K-RC 82 10 2.52 0.25 1.00 PC45-101K-RC 100 10 1KHz 0.35 0.97 PC45-121K-RC 120 10 1KHz 0.40 0.89 PC45-151K-RC 150 10 1KHz 0.47 0.78 PC45-181K-RC 180 10 1KHz 0.63 0.72 PC45-221K-RC 220 10 1KHz 0.73 0.66 PC45-271K-RC 270 10 1KHz 0.97 0.57 PC45-331K-RC 330 10 1KHz 1.15 0.52 PC45-391K-RC 390 10 1KHz 1.30 0.48 PC45-471K-RC 470 10 1KHz 1.48 0.42 PC45-561K-RC 560 10 1KHz 1.90 0.33 PC45-681K-RC 680 10 1KHz 2.25 0.28 PC45-821K-RC 820 10 1KHz 2.55 0.24 *Inductance drop no more than 10% at rated current applied or temperature rise ∆T = 40° C. All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 15 Features • Small size allows for high mounting density • Suitable for Reflow Solder • Large DC current capability with low DC resistance • Embossed carrier tape available • Polarity identification available • Custom inductances available Characteristics Operating Temp.: -30° to +100° C. External Appearance: Clean & no external defects by visual inspection Terminal Strength: After soldering, push the coils will withstand the followings without falling off. 20.0N 20 sec. Heat Endurance: Heat at 150°C for 3 minutes; then 200°C for 25 seconds. No mechanical or electrical defect after that when back at room temperature. Insulation: Over 100M ohm at 100 VDC (coil and core). Dielectric: 100VDC for one minute (coil and core). Temperature Characteristics: (0 to 2000) x 10 -6°C. Environmental Humidity: Deviate +/-5%, after 96 hours in 90-95% relative humidity at 40°C and 1 hour of drying. Vibration: Deviate +/-5%, vibration of 1 hour, three direction; 10-55-10 Hz; 1.5mm p-p amplitude. Shock: Deviate 5% after drop down 100G shock attitude of one time in each direction. Packaging: Physical 600 per 13 inch reel. www.alliedcomponents.com