RENESAS HD74ALVC2G241

HD74ALVC2G241
Dual Bus Buffer Noninverted with 3-state Output
REJ03D0175–0200Z
(Previous ADE-205-573A (Z))
Rev.2.00
Dec.18.2003
Description
The HD74ALVC2G241 has dual bus buffer noninverted with 3-state output in an 8 pin package. Two
noninverters are included in one circuit. Each circuit can be independently controlled by the enable signal
OE or OE, which enables outputs when receiving a low or high-level signal, respectively. To ensure the
high impedance state during power up or power down, OE should be connected to VCC through a pull-up
resistor; the minimum value of the resistor is determined by the current sinking capability of the driver.
Low voltage and high-speed operation is suitable for the battery powered products (e.g., notebook
computers), and the low power consumption extends the battery life.
Features
• The basic gate function is lined up as Renesas uni logic series.
• Supplied on emboss taping for high-speed automatic mounting.
• Supply voltage range : 1.2 to 3.6 V
Operating temperature range: −40 to +85°C
• All inputs VIH (Max.) = 3.6 V (@VCC = 0 V to 3.6 V)
All outputs VO (Max.) = 3.6 V (@VCC = 0 V)
• Output current
±2 mA (@VCC = 1.2 V)
±4 mA (@VCC = 1.4 V to 1.6 V)
±6 mA (@VCC = 1.65 V to 1.95 V)
±18 mA (@VCC = 2.3 V to 2.7 V)
±24 mA (@VCC = 3.0 V to 3.6 V)
• Ordering Information
Part Name
Package Type
Package Code
Package
Abbreviation
Taping Abbreviation
(Quantity)
HD74ALVC2G241USE
SSOP-8 pin
TTP-8DBV
US
E (3,000 pcs/reel)
Rev.2.00, Dec.18.2003, page 1 of 12
HD74ALVC2G241
Outline and Article Indication
• HD74ALVC2G241
Index band
Lot No.
Y M W
A 4 1
Y : Year code
(the last digit of year)
M : Month code
W : Week code
SSOP-8
Marking
Function Table
Inputs
OE
A
Output Y
L
L
L
L
H
H
H
X
Z
OE
A
Output Y
H
L
L
H
H
H
L
X
Z
Inputs
H:
L:
X:
Z:
High level
Low level
Immaterial
High impedance
Rev.2.00, Dec.18.2003, page 2 of 12
HD74ALVC2G241
Pin Arrangement
OE
1
8
VCC
A1
2
7
OE
Y2
3
6
Y1
GND
4
5
A2
(Top view)
Absolute Maximum Ratings
Item
Symbol
Ratings
Unit
Supply voltage range
VCC
−0.5 to 4.6
V
Input voltage range *1
VI
−0.5 to 4.6
V
VO
−0.5 to VCC+0.5
V
Output voltage range
*1, 2
−0.5 to 4.6
Conditions
Output : H or L or Z
VCC : OFF
Input clamp current
IIK
−50
mA
VI < 0
Output clamp current
IOK
±50
mA
VO < 0 or VO > VCC
Continuous output current
IO
±50
mA
VO = 0 to VCC
Continuous current through
VCC or GND
ICC or IGND
±100
mA
Maximum power dissipation
*3
at Ta = 25°C (in still air)
PT
200
mW
Storage temperature
Tstg
−65 to 150
°C
Notes:
The absolute maximum ratings are values, which must not individually be exceeded, and
furthermore, no two of which may be realized at the same time.
1. The input and output voltage ratings may be exceeded if the input and output clamp-current
ratings are observed.
2. This value is limited to 4.6 V maximum.
3. The maximum package power dissipation was calculated using a junction temperature of 150°C.
Rev.2.00, Dec.18.2003, page 3 of 12
HD74ALVC2G241
Recommended Operating Conditions
Item
Symbol
Min
Max
Unit
Supply voltage range
VCC
1.2
3.6
V
Input voltage range
VI
0
3.6
V
Output voltage range
VO
0
VCC
V
Output current
IOH

−2
mA

−4
VCC = 1.4 V

−6
VCC = 1.65 V

−18
VCC = 2.3 V

−24
VCC = 3.0 V

2
VCC = 1.2 V

4
VCC = 1.4 V

6
VCC = 1.65 V

18
VCC = 2.3 V
IOL
Input transition rise or fall rate
Operating free-air temperature
∆t / ∆v
Ta

24
0
20
0
10
−40
85
Note: Unused or floating inputs must be held high or low.
Rev.2.00, Dec.18.2003, page 4 of 12
Conditions
VCC = 1.2 V
VCC = 3.0 V
ns / V
VCC = 1.2 to 2.7 V
VCC = 3.3±0.3 V
°C
HD74ALVC2G241
Electrical Characteristics
(Ta = −40 to 85°C)
Item
Symbol
VCC (V) *
Min
Input voltage
VIH
1.2
VIL
Output voltage
VOH
VOL
Typ
Max
Unit
VCC×0.75 

V
1.4 to 1.6
VCC×0.7


1.65 to 1.95
VCC×0.7


2.3 to 2.7
1.7


3.0 to 3.6
2.0


1.2


VCC×0.25
1.4 to 1.6


VCC×0.3
1.65 to 1.95


VCC×0.3
2.3 to 2.7


0.7
3.0 to 3.6


0.8
Min to Max
VCC−0.2


1.2
0.9


IOH = −2 mA
1.4
1.1


IOH = −4 mA
1.65
1.2


IOH = −6 mA
2.3
1.7


IOH = −18 mA
3.0
2.2


IOH = −24 mA
Min to Max


0.2
IOL = 100 µA
1.2


0.3
IOL = 2 mA
1.4


0.3
IOL = 4 mA
1.65


0.3
IOL = 6 mA
2.3


0.55
IOL = 18 mA
3.0


0.55
IOL = 24 mA
V
Test conditions
IOH = −100 µA
Input current
IIN
3.6


±5
µA
VIN = 3.6 V or GND
Off state output
current
IOZ
3.6


±5
µA
VO = VCC or GND
Quiescent supply
current
ICC
3.6


10
µA
VIN = VCC or GND,
IO = 0
Output leakage
current
IOFF
0


5
µA
VIN or VO =
0 to 3.6 V
Input capacitance
CIN
3.3

4.5

pF
VIN = VCC or GND
Note: For conditions shown as Min or Max, use the appropriate values under recommended operating
conditions.
Rev.2.00, Dec.18.2003, page 5 of 12
HD74ALVC2G241
Switching Characteristics
(Ta = −40 to 85°C)
VCC = 1.2 V
Item
Symbol
Min
Typ
Max
Unit
Test
conditions
FROM
(Input)
TO
(Output)
Propagation
delay time
tPLH
tPHL

5.5

ns
CL = 15 pF
A
Y
Enable time
tZH
tZL

6.5

ns
CL = 15 pF
OE, OE
Y
Disable time
tHZ
tLZ

4.5

ns
CL = 15 pF
OE, OE
Y
Item
Symbol
Min
Typ
Max
Unit
Test
conditions
FROM
(Input)
TO
(Output)
Propagation
delay time
tPLH
tPHL
2.0

7.0
ns
CL = 15 pF
A
Y
Enable time
tZH
tZL
2.0

7.0
ns
CL = 15 pF
OE, OE
Y
Disable time
tHZ
tLZ
2.0

7.0
ns
CL = 15 pF
OE, OE
Y
Item
Symbol
Min
Typ
Max
Unit
Test
conditions
FROM
(Input)
TO
(Output)
Propagation
delay time
tPLH
tPHL
1.5

5.0
ns
CL = 30 pF
A
Y
Enable time
tZH
tZL
1.5

5.0
ns
CL = 30 pF
OE, OE
Y
Disable time
tHZ
tLZ
1.5

5.0
ns
CL = 30 pF
OE, OE
Y
VCC = 1.5±0.1 V
VCC = 1.8±0.15 V
Rev.2.00, Dec.18.2003, page 6 of 12
HD74ALVC2G241
Switching Characteristics (cont)
VCC = 2.5±0.2 V
Item
Symbol
Min
Typ
Max
Unit
Test
conditions
FROM
(Input)
TO
(Output)
Propagation
delay time
tPLH
tPHL
1.0

4.0
ns
CL = 30 pF
A
Y
Enable time
tZH
tZL
1.0

4.0
ns
CL = 30 pF
OE, OE
Y
Disable time
tHZ
tLZ
1.0

4.0
ns
CL = 30 pF
OE, OE
Y
Item
Symbol
Min
Typ
Max
Unit
Test
conditions
FROM
(Input)
TO
(Output)
Propagation
delay time
tPLH
tPHL
1.0

3.0
ns
CL = 30 pF
A
Y
Enable time
tZH
tZL
1.0

3.0
ns
CL = 30 pF
OE, OE
Y
Disable time
tHZ
tLZ
1.0

3.0
ns
CL = 30 pF
OE, OE
Y
VCC = 3.3±0.3 V
Operating Characteristics
(Ta = 25°C)
Item
Symbol
VCC (V)
Min
Typ
Max
Unit
Test conditions
Power dissipation
CPD
1.5

10.5

pF
f = 10 MHz
1.8

10.5

2.5

11.0

3.3

13.0

capacitance
Rev.2.00, Dec.18.2003, page 7 of 12
HD74ALVC2G241
Test Circuit - 1
Input
Pulse Generator
Z OUT = 50 Ω
Symbol
VCC
See Function Table
VCC
V OUT
CL
RL
V CC = 1.2 V,
V = 2.5±0.2 V,
V = 1.8±0.15 V CC
1.5±0.1 V CC
3.3±0.3 V
RL
2.0 kΩ
1.0 kΩ
500 Ω
CL
15 pF
30 pF
30 pF
Note: CL includes probe and jig capacitance.
Rev.2.00, Dec.18.2003, page 8 of 12
HD74ALVC2G241
Waveforms - 1
tr
tf
Input A
VIH
90%
90%
V ref
V ref
10%
10%
GND
t PHL
t PLH
VOH
V ref
Output Y
V ref
VOL
Symbol
V CC = 1.2 V,
1.5±0.1 V, V CC = 2.5±0.2 V
1.8±0.15 V
V CC = 3.3±0.3 V
tr / t f
2.0 ns
2.5 ns
2.5 ns
V IH
VCC
VCC
2.7 V
V ref
50%
50%
1.5 V
Note: Input waveform : PRR = 10 MHz, duty cycle 50%
Rev.2.00, Dec.18.2003, page 9 of 12
HD74ALVC2G241
Test Circuit - 2
VCC
VCC
Output
See Function Table
Input
Pulse Generator
Z OUT = 50 Ω
RL
OPEN
See under table
GND
*1
CL
RL
S1
V CC = 1.2 V,
1.5±0.1 V, V = 3.3±0.3 V
CC
1.8±0.15 V,
2.5±0.2 V
Symbol
t PLH / t PHL
OPEN
OPEN
t HZ / t ZH
GND
GND
t LZ / t ZL
VCC×2
6.0
Symbol
S1
V CC = 1.2 V,
V = 2.5±0.2 V,
V = 1.8±0.15 V CC
1.5±0.1 V CC
3.3±0.3 V
RL
2.0 kΩ
1.0 kΩ
500 Ω
CL
15 pF
30 pF
30 pF
Note: CL includes probe and jig capacitance.
Rev.2.00, Dec.18.2003, page 10 of 12
HD74ALVC2G241
Waveforms - 2
tf
tr
90%
Input OE
VIH
90%
V ref
V ref
10%
10%
GND
VIH
V ref
Input OE
V ref
GND
t ZL
t LZ
VOH
V ref
VL
t ZH
Output Y
VOL
t HZ
VOH
VH
V ref
VOL
Symbol
V CC = 1.2 V,
1.5±0.1 V
V CC = 1.8±0.15 V V CC = 2.5±0.2 V
V CC = 3.3±0.3 V
tr / t f
2.0 ns
2.0 ns
2.5 ns
2.5 ns
V IH
VCC
VCC
VCC
2.7 V
50%
50%
1.5 V
V ref
VH / V L
50%
VH = VOH-0.1 V
VL = VOL+0.1 V
VH = VOH-0.15 V VH = VOH-0.15 V VH = VOH-0.3 V
VL = VOL+0.15 V VL = VOL+0.15 V VL = VOL+0.3 V
Note: Input waveform : PRR = 10 MHz, duty cycle 50%
Rev.2.00, Dec.18.2003, page 11 of 12
HD74ALVC2G241
Package Dimensions
2.0 ± 0.2
1.5 ± 0.2
+ 0.1
(0.17)
8 − 0.2 − 0.05
Package Code
JEDEC
JEITA
Mass (reference value)
Rev.2.00, Dec.18.2003, page 12 of 12
+ 0.1
0.13 − 0.05
0 − 0.1
0.7 ± 0.1 (0.4)
2.3 ± 0.1
(0.5) (0.5) (0.5)
3.1 ± 0.3
(0.4)
Unit: mm
TTP–8DBV


0.010 g
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary
circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
http://www.renesas.com
RENESAS SALES OFFICES
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501
Renesas Technology Europe Limited.
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom
Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900
Renesas Technology Europe GmbH
Dornacher Str. 3, D-85622 Feldkirchen, Germany
Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11
Renesas Technology Hong Kong Ltd.
7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2375-6836
Renesas Technology Taiwan Co., Ltd.
FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology (Shanghai) Co., Ltd.
26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China
Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952
Renesas Technology Singapore Pte. Ltd.
1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
© 2003. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon 1.0