METALLIZED POLYCARBONATE FILM CAPACITORS WRAP AND FILL - CYLINDRICAL METALLIZED POLYCARBONATE Self-healing, high reliability High stability Low capacitance change over wide temperature range High volumetric efficiency Precision circuits requiring low losses, light duty, low frequency energy discharge, coupling and decoupling STYLE “A1” Polyester tape wrap, end filled with epoxy Round-cylindrical shape, axial leads Designed to meet thermal shock, vibration and moisture resistance specifications Metallized polycarbonate capacitors are also available in oval-rectangular, axial-lead “Style A2.” Hermetically sealed units are available. Please contact factory or representative. SPECIFICATIONS CONSTRUCTION: metallized polycarbonate capacitors are available only in extended foil (non-inductive) construction PACKAGING: polyester tape wrap with epoxy endfills gives the best possible volume density for this type unit LEADS: tin or tin/lead plated copper wire is standard and may be soldered or welded in circuit assembly TEMPERATURE RANGE: may be operated at rated DC voltage from -55°C to +125°C without derating voltage ELECTRICAL (NON-DESTRUCTIVE) TEST 1. 2. 3. 4. 5. CAPACITANCE: shall be measured at or referred to 1000 ± 20 Hz at 25 ± 5°C for capacitance values up to and including 1.0 uf. Capacitance values greater than 1.0 mfd shall be measured at 60 ± 6 Hz. Ref: MIL-STD-202E, Method 305 DISSIPATION FACTOR: shall be measured as described for capacitance and shall not exceed 0.3% to 1 mfd, 0.5% greater than 1 mfd. Typical values throughout the temperature range, are given on curves. INSULATION RESISTANCE: shall be measured as follows: 50 - 100V at 25°C 25,000 meg/mfd, need not exceed 50,000 Megohms 200V at 25°C 50,000 meg/mfd, need not exceed 100,000 Megohms Ref: MIL-STD-202E, Method 302 DIELECTRIC STRENGTH: capacitors shall withstand specified DC test potential for one minute through a limiting resistance of 1 ohm/volt Terminal to terminal - 150% of DC rating Terminal to case - 200% of DC rating Ref: MIL-STD-202E, Method 301 DIELECTRIC ABSORPTION: shall not exceed 0.2% when tested to MIL-C-19978D Ref: MIL-C-19978D, Paragraph 3.22 Electromagnetic Integrated Solutions 8061 Avonia Road ● Fairview ● Pennsylvania ● 16415 Phone: (814) 474-1571 ● Email: [email protected] ● Web: http://eis.apitech.com ENVIRONMENTAL TESTS 1. 2. 3. 4. VIBRATION: capacitors will meet or exceed the requirements of MIL-STD-202E, Method 204 MOISTURE RESISTANCE: capacitors will meet or exceed the requirements of MIL-STD-202E, Method 103B, condition B, with 500 VDC or rated voltage applied, whichever is less LIFE TEST: will withstand 140% of the rated DC voltage at 125°C for 250 hours with not more than one failure in 12 units LEAD PULL TEST: the leads on these capacitors shall withstand a steadily applied axial pull of 5 lbs. for one minute CUSTOM DESIGN Available on short notice -- special shapes, values, characteristics, combination sections and networks. Non-metallic cases or fabricated steel and brass with glass-to-metal seals. Engineering service is expert and prompt. APPLICATIONS Metallized polycarbonate capacitors, in Style "A1" cylindrical wrap and fill cases offer the user the best possible volume density for cord wood type assemblies. These units have consistently met the environmental requirements of MIL-C-55514A and moisture resistance per M I L-STD-202E, Method 103B. Metallized polycarbonate capacitors combine the reliability of self-healing action with high dielectric strength and insulation resistance of polycarbonate film. Metallized polycarbonate capacitors are designed primarily for DC application -- blocking, coupling, decoupling, bypass, DC line filtering where RF and audio components are small in comparison to DC rating. However, they have been used successfully in such AC power applications as power factor correction and AC line filtering. Metallized polycarbonate capacitors operate at all temperatures from -55°C to +125°C and are intended for utilization in sealed or encapsulated assemblies. APPLICATION GUIDE: [AC VOLTAGE RATING, -55˚C to +125˚C. AMBIENT] EQUIVALENT VAC [RMS] RATING AT VOLTAGE RATING 60 Hz 400 Hz 50V N/A N/A 100V 63 VAC 45 VAC 200V 160 VAC 95 VAC 400V 200 VAC 170 VAC 600V 240 VAC 190 VAC (AC voltage assumed to be pure sine wave) TYPICAL TEMPERATURE CHARACTERISTICS Electromagnetic Integrated Solutions 8061 Avonia Road ● Fairview ● Pennsylvania ● 16415 Phone: (814) 474-1571 ● Email: [email protected] ● Web: http://eis.apitech.com 1000 Hz N/A 40 VAC 80 VAC 140 VAC 160 VAC RA1, DA1, BA1 SERIES – SPECIFICATIONS DIMENSIONS *50 VDC MFD .0010 .0012 .0015 .0018 .0022 .0027 .0033 .0039 .0047 .0056 .0068 .0082 .010 .012 .015 .018 .022 .027 .033 .039 .047 .056 .068 .082 .10 .12 .15 .18 .22 .27 .33 .39 .47 .56 .68 .82 1.0 1.5 2.0 3.0 4.0 5.0 Dia. .17 .17 .17 .17 .17 .17 .17 .17 .17 .17 .17 .17 .17 .17 .17 .17 .17 .17 .17 .17 .17 .17 .17 .17 .21 .22 .25 .17 .18 .19 .21 .22 .25 .27 .29 .31 .29 .30 .35 .42 .42 .38 L .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .53 .53 .53 .53 .53 .53 .53 .53 .53 .65 .78 .78 .78 .90 1.17 **50 – 100 VDC Part No. RA1A102 RA1A122 RA1A152 RA1A182 RA1A222 RA1A272 RA1A332 RA1A392 RA1A472 RA1A562 RA1A682 RA1A822 RA1A103 RA1A123 RA1A153 RA1A183 RA1A223 RA1A273 RA1A333 RA1A393 RA1A473 RA1A563 RA1A683 RA1A823 RA1A104 RA1A124 RA1A154 RA1A184 RA1A224 RA1A274 RA1A334 RA1A394 RA1A474 RA1A564 RA1A684 RA1A824 RA1A105 RA1A155 RA1A205 RA1A305 RA1A405 RA1A505 Dia. .17 .17 .17 .17 .17 .17 .17 .17 .17 .17 .17 .17 .17 .17 .17 .17 .17 .17 .18 .19 .19 .15 .15 .15 .18 .20 .22 .23 .24 .21 .24 .26 .25 .28 .29 .36 .36 .37 .42 .49 .64 .70 L .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .53 .53 .53 .53 .53 .53 .53 .53 .65 .65 .65 .78 .78 .78 .78 .90 1.17 1.17 1.17 1.40 1.40 Part No. DA1B102 DA1B122 DA1B152 DA1B182 DA1B222 DA1B272 DA1B332 DA1B392 DA1B472 DA1B562 DA1B682 DA1B822 DA1B103 DA1B123 DA1B153 DA1B183 DA1B223 DA1B273 DA1B333 DA1B393 DA1B473 DA1B563 DA1B683 DA1B823 DA1B104 DA1B124 DA1B154 DA1B184 DA1B224 DA1B274 DA1B334 DA1B394 DA1B474 DA1B564 DA1B684 DA1B824 DA1B105 DA1B155 DA1B205 DA1B305 DA1B405 DA1B505 **50 – 200 VDC Dia. .17 .17 .17 .17 .17 .17 .17 .17 .17 .17 .18 .18 .18 .18 .18 .18 .19 .17 .18 .19 .20 .23 .24 .27 .30 .32 .30 .32 .35 .31 .33 .36 .38 .41 .44 .42 .48 .57 .59 .65 .65 .73 L .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .53 .53 .53 .53 .53 .53 .53 .53 .53 .65 .65 .65 .90 .90 .90 .90 .90 .90 1.17 1.17 1.17 1.40 1.68 1.95 1.95 Part No. BA1C102 BA1C122 BA1C152 BA1C182 BA1C222 BA1C272 BA1C332 BA1C392 BA1C472 BA1C562 BA1C682 BA1C822 BA1C103 BA1C123 BA1C153 BA1C183 BA1C223 BA1C273 BA1C333 BA1C393 BA1C473 BA1C563 BA1C683 BA1C823 BA1C104 BA1C124 BA1C154 BA1C184 BA1C224 BA1C274 BA1C334 BA1C394 BA1C474 BA1C564 BA1C684 BA1C824 BA1C105 BA1C155 BA1C205 BA1C305 BA1C405 BA1C505 400 VDC Dia. .17 .17 .17 .17 .17 .17 .17 .17 .17 .18 .20 .22 .23 .25 .27 .28 .31 .33 .35 .38 .41 .33 .36 .38 .41 .40 .44 .48 .52 .50 .54 .52 .54 .61 .67 .72 .72 .80 .91 1.10 1.18 1.30 Higher values or voltages are available. *50 VDC units also available in B and D material. **100 VDC units also available in B material. PART LENGTH .40 THRU .65 .78 THRU .90 1.17 THRU 2.25 WIRE LEADS A.W.G #24 #22 #20 Electromagnetic Integrated Solutions 8061 Avonia Road ● Fairview ● Pennsylvania ● 16415 Phone: (814) 474-1571 ● Email: [email protected] ● Web: http://eis.apitech.com DIA. .020 .025 .032 L .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .40 .53 .53 .53 .53 .53 .53 .53 .53 .53 .53 .78 .78 .78 .78 .90 .90 .90 .90 1.17 1.17 1.40 1.40 1.40 1.40 1.40 1.68 1.95 1.95 1.95 2.25 2.25 600 VDC Part No. BA1E102 BA1E122 BA1E152 BA1E182 BA1E222 BA1E272 BA1E332 BA1E392 BA1E472 BA1E562 BA1E682 BA1E822 BA1E103 BA1E123 BA1E153 BA1E183 BA1E223 BA1E273 BA1E333 BA1E393 BA1E473 BA1E563 BA1E683 BA1E823 BA1E104 BA1E124 BA1E154 BA1E184 BA1E224 BA1E274 BA1E334 BA1E394 BA1E474 BA1E564 BA1E684 BA1E824 BA1E105 BA1E155 BA1E205 BA1E305 BA1E405 BA1E505 Dia. .17 .17 .17 .17 .17 .18 .19 .22 .24 .27 .28 .30 .31 .33 .36 .38 .35 .38 .37 .40 .42 .45 .48 .52 .51 .53 .55 .57 .60 .59 .61 .69 .73 .78 .78 .79 .86 .92 1.17 L .40 .40 .40 .40 .40 .40 .40 .53 .53 .53 .53 .53 .53 .53 .53 .53 .65 .65 .78 .78 .78 .78 .78 .78 .90 1.17 1.17 1.17 1.17 1.68 1.68 1.68 1.68 1.68 2.00 2.25 2.25 2.25 2.25 Part No. BA1G102 BA1G122 BA1G152 BA1G182 BA1G222 BA1G272 BA1G332 BA1G392 BA1G472 BA1G562 BA1G682 BA1G822 BA1G103 BA1G123 BA1G153 BA1G183 BA1G223 BA1G273 BA1G333 BA1G393 BA1G473 BA1G563 BA1G683 BA1G823 BA1G104 BA1G124 BA1G154 BA1G184 BA1G224 BA1G274 BA1G334 BA1G394 BA1G474 BA1G564 BA1G684 BA1G824 BA1G105 BA1G155 BA1G205