CPI Beverly Microwave Division Solid State Limiters are available from UHF to Ka-Band Typical Operating Parameters Frequency UHF L-Band S-Band C-Band X-Band Ku-Band Ka-band Power Handling 500 W 500 w 250 W 100 KW 20 W 10 W 10 W Pulse Width 10 µs 10 µs 10 µs 5 µs 5 µs 5 µs 2 µs Insertion Loss 0.7 dB 0.7 dB 1.0 dB 1.0 dB 1.0 dB 1.5 dB 1.5 dB VSWR 1.3:1 1.3:1 1.3:1 1.3:1 1.4:1 1.5:1 1.5:1 Isolation 40 dB 40 dB 30 dB 30 dB 30 dB 30 dB 30 dB Switching Speed 1 µs 1 µs 1 µs 1 µs 1 µs 1 µs 500 ns Configurations • Waveguide or Coax configuration • Single Pole Single Throw • Single Pole Double Throw • Single Pole Multiple Throw Options • Hot or Cold Switching • Integrated Driver • BITE Circuitry The values listed above represent typical limits for the product and design trade-offs are available for enhanced performance of various parameters. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products visit our webpage at www.cpii.com, or contact CPI Beverly Microwave Division, 150 Sohier Road, Beverly, MA 01915 Telephone: 1 (978) 922-6000 FAX: 1 (978) 922-2736 email: [email protected] CPI │ Solid State Switches Solid State Switches