V I S H AY I N T E R T E C H N O L O G Y, I N C . MULTILAYER CERAMIC CHIP CAPACITORS VJ Safety Cer tified Capacitors C0G (NP0) and X7R Surface-Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications KEY BENEFITS • Safety Certified surface-mount (SMD) capacitor • Approved IEC 60384-14 • Dielectric C0G (NP0) and X7R with three sizes: 2008, 2012, and 2220 • X1/Y2 and X2 classification rated for 250 VAC • Wet build process • Reliable Noble Metal Electrode (NME) system APPLICATIONS • Lightning strike and voltage surge protection • EMI and AC line filtering • Isolators • Power supplies • Facsimile and telephone • AC equipment and appliances RESOURCES • Datasheets: VJ Safety Certified Capacitors C0G (NP0) - www.vishay.com/doc?45007 VJ Safety Certified Capacitors X7R - www.vishay.com/doc?45020 • Material categorization: For definitions of compliance please see http://www.vishay.com/doc?99912 • For technical questions contact [email protected] Available One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/4 VMN-PT0369-1409 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . MULTILAYER CERAMIC CHIP CAPACITORS VJ Safety Cer tified Capacitors C0G (NP0) and X7R Surface-Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications ELECTRICAL SPECIFICATIONS for C0G (NP0): • Operating temperature: - 55 °C to + 125 °C • Temperature Coefficient of Capacitance (TCC): 0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C • Dissipation Factor (DF) (1) : 0.1 % maximum for values ≤1000 pF at 1.0 VRMS at 1 MHz, or per IEC 60384-14 at 1.0 VRMS at 10 kHz VJ Safety Note:Electrical characteristics at + 25 °C unless otherwise specified (1)Test conditions per IEC 60384-14: www.vishay.com 1.0 VRMS and Capacitance: C ≤ 100 pF at 1 MHz and C > 100 pF at 1 kHz • Insulating Resistance: At + 25 °C 100 000 MΩ or 1000 ΩF whichever is less At +125 °C 10 000 MΩ or 100 ΩF whichever is less • Aging Rate: 0 % maximum per decade • Voltage Proof Test: X1/Y2: 1500 VAC (RMS), 60 s ± 1 s X2: 1075 VDC, 60 s ± 1 s • Peak Impulse Voltage: Certified Capacitors C0G (NP0) X1/Y2: 5000 V X2: 2500 V Vishay Vitramon SELECTION CHART DIELECTRIC C0G (NP0) (X1/Y2) C0G (NP0) (X2) VJ2008 (1) VJ2012 (1) VJ2220 (1) VJ2008 (1) VJ2012 (1) CASE CODE 2008 2012 2220 2008 2012 VOLTAGE (VAC) 250 250 250 250 250 U U U U U STYLE VOLTAGE CODE CAP. CODE CAP. 100 10 pF • • 120 12 pF • • 150 15 pF • 180 18 pF • • • • 220 22 pF • • • • 270 27 pF • • • • 330 33 pF • • • • 390 39 pF • • • • 470 47 pF • • • • • 560 56 pF • • • • • 680 68 pF • • • • • 820 82 pF • • • • • 101 100 pF • • • • • 121 120 pF • • • • • 151 150 pF • 181 180 pF • www.vishay.com • 220 pF • VJ Safety Certified Capacitors C0G ••(NP0) • • • • • • • • • 271 270 pF • • • 331 330 pF • • • 221 QUICK DATA 391 REFERENCE 390 pF 471 DIELECTRIC 561 470 pF 560 pF 681 680 pF C0G821 (NP0) (X1 / Y2) 820 pF 102 1.0 nF • Vishay Vitramon • • MAXIMUM VOLTAGE • (VAC) • • MINIMUM • MAXIMUM 2008 250 • 10 pF 220 pF 2012 250 • 18 pF 470 pF 2220 250 • 47 pF 1.0 nF CASE • CAPACITANCE • • • 2008 250 10 pF 390 pF 1.2 nF C0G122 (NP0) (X2) 2012 250 18 pF 470 pF 152 1.5 nF Notes182 1.8 nF • Detail ratings see “Selection Chart” Notes • Size 2008 and 2012 are compatible with 1808 and 1812 solderlands and full conform with the IEC-60384-14 requirements for creepage (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 distance RoHS-compliant ORDERING INFORMATION (1) QUANTITIES 101 PACKAGING VJ2008 A CASE DIELECTRIC CASE CODE CODE 2008 A = C0G (NP0) 2012 2008 2220 2012 CAPACITANCE TAPE SIZE NOMINAL CODE K X U S T ### (1) 7" REEL QUANTITIESAC VOLTAGE 11 1/4" AND 13"PACKAGING REEL QUANTITIES CAPACITANCE TERMINATION MARKING PROCESS TOLERANCEPACKAGING CODE RATING CODE PACKAGING CODE “T” “R” S = marked X1 = X1 / J=±5% X = Ni barrier U = 250 VAC 2000 (see Part Marking 10 000 Y2 K = ± 10 % 100 % tin plated table below) X2 = X2 1000 4000 Expressed in 12 mm(pF). picofarads The 12first mmtwo digits are 2220 12 mm the 1000 4000 significant, T = 7" reel/plastic tape third is a multiplier. Note R = 11 1/4"/13" reel/plastic tape Examples: (1) Reference: EIA standard RS481 101 = 100 pF - “Taping of Surface Mount Components for Automatic Placement” Notes: Notes (1) Process code must be added to control products and requirements (1) Process code must be added to control products and requirements • Detail ratings see “Selection Chart” ° Detail ratings see “Selection Chart” PRODUCT SHEET Revision: 09-Sep-14 Document Number: 45007 3 For technical questions, contact: [email protected] ST ND THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND 1 DIGIT 2 THIS DIGITDOCUMENT MARKING ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MANUFACTURER DIELECTRIC AND RATING PART MARKING 2/4 VMN-PT0369-1409 THIS DOCUMENT IS SUBJECT TO CHANGEVCWITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC C = C0G/NP0, X1/Y2 V = Vishay VT T = C0G/NP0, X2 DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . MULTILAYER CERAMIC CHIP CAPACITORS VJ Safety Cer tified Capacitors C0G (NP0) and X7R Surface-Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications ELECTRICAL SPECIFICATIONS for X7R: • Operating temperature: - 55 °C to + 125 °C • Temperature Coefficient of Capacitance (TCC): ± 15 % from - 55 °C to + 125 °C, with 0 VDC applied • Dissipation Factor (DF) (1) : 2.5 % maximum at 1.0 VRMS at 1 kHz or per IEC 60384-14 at 1.0 VRMS at 10 kHz Note:Electrical characteristics at + 25 °C unless otherwise specified www.vishay.com (1)Test conditions per IEC 60384-14: 1.0 VRMS and capacitance: C ≤ 100 pF at 1 MHz and C > 100 pF at 1 kHz VJ • Insulating Resistance: At + 25 °C 100 000 MΩ or 1000 ΩF whichever is less At + 125 °C 10 000 MΩ or 100 ΩF whichever is less • Aging Rate: 1 % maximum per decade • Voltage Proof Test: X1/Y2: 1500 VAC (RMS), 60 s ± 1 s X2: 1075 VDC, 60 s ± 1 s • Peak Impulse Voltage: Safety Certified X1/Y2: 5000 V Capacitors X7R X2: 2500 V Vishay Vitramon SELECTION CHART DIELECTRIC X7R (X1 / Y2) X7R (X2) VJ2012 (1) VJ2220 (1) VJ2008 (1) VJ2012 (1) VJ2220 (1) STYLE VJ2008 (1) CASE CODE 2008 2012 2220 2008 2012 2220 VOLTAGE (VAC) 250 250 250 250 250 250 VOLTAGE CODE U U U U U U CAP. CODE CAP. 100 10 pF 220 22 pF 330 33 pF 470 47 pF 560 56 pF 680 68 pF • • 820 82 pF • • 101 100 pF • • 121 120 pF 151 150 pF • • • • • • • • 181 180 pF • • • • 221 220 pF 271 270 pF • • • • • • • • • • • • 331 330 pF • • • • • • 391 390 pF 471 470 pF • • • • • • • • • • • • 561 560 pF • • • • • • 681 680 pF 821 820 pF • • • • • • • • • • • • 102 1.0 nF www.vishay.com • • • • • 122 1.2 nF 152 1.5 nF • • • • • • • • 182 1.8 nF QUICK DATA • • • • 222 REFERENCE 2.2 nF CAPACITANCE 272 2.7 nF • • • • MAXIMUM VOLTAGE DIELECTRIC CASE (VAC) MINIMUM MAXIMUM • • • 332 3.3 nF • • 392 3.9 nF 2008 250 82 pF 1.0 nF • 4.7 nF • • X7R472 (X1 / Y2) 2012 250 150 pF 1.2 nF • • 562 5.6 nF 2220 250 270 pF 4.7 nF • 682 6.8 nF 2008 250 82 pF 2.7 nF • 822 8.2 nF • X7R (X2) 2012 250 150 pF 5.6 nF • 103 10 nF 2220 250 270 pF 12 nF • 123 12 nF Notes153 15 nF • Detail ratings see “Selection Chart” Notes • Size 2008 and 2012 are compatible with 1808 and 1812 solderlands and full conform with the IEC-60384-14 requirements for creepage (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 distance RoHS-compliant VJ Safety Certified Capacitors X7R Vishay Vitramon ORDERING INFORMATION QUANTITIES 102 (1) PACKAGING VJ2008 Y CASE DIELECTRIC CODE CASE CODE 2008 Y = X7R 2012 2008 2220 2012 CAPACITANCE NOMINAL CODE TAPE SIZE X U S T ### (1) 7" REEL QUANTITIESAC VOLTAGE 11 1/4" AND 13"PACKAGING REEL QUANTITIES CAPACITANCE TERMINATION MARKING PROCESS TOLERANCEPACKAGING CODE RATING CODE PACKAGING CODE “T” “R” K = ± 10 % X = Ni barrier U = 250 VAC S = marked X1 = X1 / 2000 M = ± 20 % 100 % tin plated (see Part Marking 10 000 Y2 table below) X2 = X2 1000 4000 K Expressed in 12 mm (pF). picofarads The 12first mmtwo digits are significant, 2220 12 mm the 1000 4000 T = 7" reel / plastic tape third is a multiplier. R = 11 1/4" / 13" reel / plastic tape Note Examples: (1) Reference: EIA standard RS481 102 = 1000 pF of Surface Mount Components for Automatic Placement” - “Taping PRODUCT SHEET Notes (1) Process Revision: 09-Sep-14 code must be added to control products and requirements3 • Detail ratings see “Selection Chart” For technical questions, contact: [email protected] 3/4 Document Number: 45020 Notes: (1) Process code must be added to control products and requirements ° Detail ratings see “Selection Chart” VMN-PT0369-1409 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PART MARKING THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC 1ST DIGIT 2ND DIGIT MARKING DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MANUFACTURER DIELECTRIC AND RATING VA A = X7R, X1 / Y2 122 821 152 102 182 122 VJ Safety Certified Capacitors C0G (NP0) • 1.2 nF 820 pF 1.5 www.vishay.com 1.0 nF nF Vishay Vitramon • 1.8 V I S H AY I N T E R T E C H N O L O G Y, 1.2 nF nF Notes152 1.5 nF (1) See182 soldering recommendations within this data book, or visit www.vishay.com/doc?45034 1.8 nF QUICK REFERENCE DATA NotesRoHS-compliant CAPACITANCE MAXIMUM VOLTAGE CASE (1) DIELECTRIC See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 (VAC) MINIMUM MAXIMUM RoHS-compliant PACKAGING QUANTITIES (1) 2008 250 10 pF 220 pF 7" REEL QUANTITIES 11 1/4" AND 13" REEL QUANTITIES C0G (NP0) (X1 / Y2) 2012 250 18 pF 470 pF (1) CASE CODE TAPE SIZE PACKAGING CODE PACKAGING CODE PACKAGING QUANTITIES 2220 250 47 pF 1.0 nF “T” “R” 7" REEL QUANTITIES 11 1/4" AND 13" REEL QUANTITIES 2008 12 mm 2000 10 000 250 CODE 10 pF 390 pF CASE CODE TAPE SIZE2008 PACKAGING PACKAGING CODE C0G (NP0) 2012(X2) 12 mm 2012 1000 4000 “T” “R” 250 18 pF 470 pF 2220 12 mm mm 1000 4000 2008 12 2000 10 000 www.vishay.com Notes Note 2012 12 mm 1000 4000 www.vishay.com • Detail ratings see “Selection Chart” (1) Reference: - “Taping of Surface Mount Components for Automatic Placement” 2220 EIA standard RS481 12 mm 1000 4000 • Size 2008 and 2012 are compatible with 1808 and 1812 solderlands and full conform with the IEC-60384-14 requirements for creepage Note distance APPROVALS (1) Reference: EIA standard RS481 - “Taping of Surface Mount Components for Automatic Placement” APPROVALS IEC 60384-14 - Safety tests SELECTION CHART CB test certificates: IEC 60384-14:2005 3rd edition - Safety tests ORDERING INFORMATION DIELECTRIC C0G (NP0) (X1/Y2) C0G (NP0) (X2) CB test certificates: X1/Y2-capacitor: 10 pF pF pF 250 VAC S X1/Y2-capacitor DE1-51726 K 10to pF1000 to 1000 VAC (1) APPROVALS VJ2008 AC0G (NP0): 101DE1-51726 U (1) 250 T ### (1) X (1) VJ2012 VJ2220 VJ2008 (1) VJ2012 STYLE VJ2008 (1) X1/Y2-capacitor: DE1-51726 10 pF to 1000 pF 250 V rd edition - Safety AC X2-capacitor C0G (NP0): DE1-51726 10 pF to 470 pF 250 V X2-capacitor: DE1-51726 10 pF to 470 pF 250 V IEC 60384-14:2005 3 tests AC AC CASE DIELECTRIC CAPACITANCE TERMINATION AC 2220 VOLTAGE MARKING PACKAGING 2012 PROCESS CASE CODE 2008 CAPACITANCE 10 2012 2008 X2-capacitor: DE1-51726 pF pF60384-14 250 VAC CB test X1/Y2-capacitor X7R: DE1-52193 82to pF470 to 4700 pF RATING VAC CODE NOMINAL CODE TOLERANCE CODE DIN EN certificates: 60384-14 (VDE 0565 Teil 1-1):2006-04; EN 60384-14:2005-08; IEC (ed.3)250 VOLTAGE (V ) 250 250 250 250 250 AC (VDE 0565 Teil 1-1):2006-04; X1/Y2-capacitor: DE1-51726 10 pF 250 VAC DIN EN 60384-14 EN 60384-14:2005-08; 60384-14 X2-capacitor X7R: DE1-52193 82 to pF1000 toIEC 12pF 000 pF (ed.3) 250 VAC X1/Y2-capacitor: 70001064 10 pF to 1000 pF 250 V~ 2008 A =CODE C0G (NP0) Expressed in U S = marked J=±5% X = Ni barrier U = 250 VOLTAGE UpF U VAC 250 U UX1 = X1 / APPROVALS X2-capacitor: DE1-51726 10100 to1000 470 pF VV~ AC X1/Y2-capacitor: 70001064 10 pF 250 2012EN 60384-14 (VDE picofarads (pF). (see Part Marking Y2 K = ± 10 EN % 60384-14:2005-08; % plated X2-capacitor: 70001064 10pF pFto totin 470 pF 250 V~ DIN 0565 Teil 1-1):2006-04; IEC 60384-14 (ed.3) rd edition IEC 60384-14:2005 3 Safety tests CAP. CODE CAP. The first two 2220 table below) X2 = X2 DIN EN 60384-14 (VDE 0565 Teil 1-1):2006-04; EN 60384-14:2005-08; IEC 60384-14 (ed.3) X2-capacitor: 70001064 10 pF to 470 pF 250 V~ CAN/CSA-E60384-14:09 and ANSI/UL 60384-14-2009 CB test are 70001064 X1/Y2-capacitor C0G10 (NP0): 10 pF to 1000 pF 250 V~ 100 certificates: pFand digits • • X1/Y2-capacitor: 70001064 10 pF to 1000 pF 250 V~ CAN/CSA-E60384-14:09 ANSI/UL 60384-14-2009 significant, the X2-capacitor C0G (NP0): 70001064 10 pF to 470 pF 250 V~ T = 7" reel/plastic tape X1/Y2-capacitor C0G (NP0): DE1-51726 10 pF to 1000 pF 250 • 120 12 pF third is a multiplier. X2-capacitor: 70001064 10 pF to 470 pF 250VAC V~ R = 11• 1/4"/13" reel/plastic tape X1/Y2-capacitor X7R: 70001064 8210 pFpF toto 4700 250 X2-capacitor C0G (NP0): 470pF pF 250V~ VAC • DE1-51726 • 150 15 pFandExamples: Revision: 12-Jun-14 Document Number: 45007 3 CAN/CSA-E60384-14:09 ANSI/UL 60384-14-2009 101 = 100 pF STORAGE AND HANDLING CONDITIONS X2-capacitor X7R: 70001064 82 pF pF to 12 pF 250 X1/Y2-capacitor X7R: DE1-52193 to 000 4700 pF 250V~ VAC technical questions, contact: [email protected] 180 18 pF • For • 82 • • Notes (1)X2-capacitor Store the components at 5and °C toANSI/UL 40 CHANGE °C• ambient temperature and 70to% conditions. X7R:22 IS DE1-52193 823pF 12relative 000 pFhumidity 250 VAC HEREIN THIS DOCUMENT SUBJECT TO WITHOUT NOTICE. THE PRODUCTS DESCRIBED AND THIS DOCUMENT CAN/CSA-E60384-14:09 60384-14-2009 • • • 45007 220 pF Revision: 12-Jun-14 Document Number: (1) Process code must be added toto control products requirements ARE SUBJECT SPECIFIC DISCLAIMERS, AT www.vishay.com/doc?91000 (2) The product is recommended beTO used within aand time-frame of 2 SET yearsFORTH after shipment. • For technical questions, • contact: [email protected] • • 270ratings see “Selection 27 pF • Detail Chart” Check solderability in case extended shelf life beyond the expiry date is needed. THIS WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN 330 DOCUMENT 33 IS pFSUBJECT TO CHANGE • • • AND THIS DOCUMENT • ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PART MARKING Precautions: • • • • 390 39 pF a. Do notMARKING store products in an environment containing corrosive1ST elements, where chloride gas, sulfide acid, alkali, salt or DIGIT especially 2NDgas, DIGIT PART • • • • • 470 47 pF MARKING MANUFACTURER DIELECTRIC AND RATING the like are present. This may cause corrosion or oxidization ofSTthe terminations, which can easily lead to poorND soldering. 1 DIGIT 2 DIGIT 560 56 pF • • • • • MARKING b. Store products onVC the shelf and avoid exposure to moisture or dust. C = C0G (NP0), X1/Y2 MANUFACTURER DIELECTRIC AND RATING • • 680 68 pF to excessive •shock, vibration, direct• sunlight and so on. • c. Do not expose products VT C0G (NP0), X2 VC CT == C0G/NP0, X1/Y2 V = Vishay • •V = Vishay • • • 820 82 pF VA X7R, X1/Y2 VT TA==C0G/NP0, X2 101 100 pF • • • • • VM M = X7R, X2 • • • • • 121 120 pF INC. MULTILAYER CERAMIC CHIP CAPACITORS VJ Safety Cer tified Capacitors C0G (NP0) and X7R VJ SafetyCeramic Certified Chip Capacitors C0G (NP0) Surface-Mount Multilayer Capacitors VJ Safety Certified Capacitors C0G (NP0) Vitramon for Safety Certified Applications Vishay Vishay Vitramon 151 150 pF • DIMENSIONS in DIMENSIONS in inches inches (millimeters) (millimeters) 181 180 pF • • • • • • • • • • • • • • • • • • • • • 221 220 pF 271 270 pF 331 330 pF • • 391 390 pF • • 471 470 pF • • 561 560 pF 681 680 pF PART 820PART pF ORDERING ORDERING 1.0 nF NUMBER NUMBER 1.2 nF VJ2008 1.5VJ2008 nF 821 CASE CASE CODE CODE 102 122 2008 2008 152 LL W W • P P WIDTH WIDTH (W) (W) • • MAXIMUM MAXIMUM THICKNESS THICKNESS (T) (T) 0.086 0.080 0.086 0.080 ±± 0.010 0.010 (2.03 (2.18) (2.03 ±± 0.25) 0.25) (2.18) 182 1.8 nF 0.126 ±± 0.008 0.086 0.200 ±± 0.010 0.126 0.008 0.086 0.200 0.010 2012 VJ2012 2012 VJ2012 (5.08 (3.20 (2.18) (5.08 ±± 0.25) 0.25) (3.20 ±± 0.20) 0.20) (2.18) Notes (1) See soldering recommendations within 0.220 ±± 0.008 0.200 ±± 0.010 0.086 0.220 0.008 0.200 0.010 0.086 this data book, or visit www.vishay.com/doc?45034 2220 VJ2220 2220 VJ2220 (5.59 (5.08 (2.18) (5.59 ±± 0.20) 0.20) (5.08 ±± 0.25) 0.25) (2.18) RoHS-compliant PACKAGING QUANTITIES PACKAGING Revision: 09-Sep-14 QUANTITIES • • • LENGTH LENGTH (L) (L) TT MAX. MAX. 0.200 0.200 ±± 0.010 0.010 (5.08 (5.08 ±± 0.25) 0.25) TERMINATION TERMINATION (P) (P) MINIMUM MAXIMUM MINIMUM MAXIMUM 0.010 0.010 (0.25) (0.25) 0.010 0.010 (0.25) (0.25) 0.010 0.010 (0.25) (0.25) 0.030 0.030 (0.76) (0.76) 0.030 0.030 (0.76) (0.76) 0.030 0.030 (0.76) (0.76) (1) (1) Document Number: 45007 2 7" REEL QUANTITIES 11 1/4" AND 13" REEL QUANTITIES 7" REEL QUANTITIES For technical questions, contact: [email protected] 11 1/4" AND 13" REEL QUANTITIES CASE CODE TAPE PACKAGING CODE PACKAGING CODE CASE CODE TAPE SIZE SIZE PACKAGING CODE PACKAGING THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THISCODE DOCUMENT “T” “T” “R” ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 “R” 2008 12 2000 10 200 8 12 mm mm 20 00 10 000 000 201 2 12 mm mm 10 00 4000 2012 12 1000 4000 222 0 12 mm mm 10 00 4000 2220 12 1000 4000 Note Note (1) Reference: EIA standard RS481 - “Taping of Surface Mount Components for Automatic Placement” (1) Reference: EIA standard RS481 - “Taping of Surface Mount Components for Automatic Placement” PRODUCT SHEET Revision: 09-Sep-14 4/4 VMN-PT0369-1409 Document Number: 45007 4 technical questions, contact: [email protected] Revision: 09-Sep-14TO CHANGE WITHOUT For Document Number: 45007 3 DESCRIBED THIS DOCUMENT IS SUBJECT NOTICE. THE PRODUCTS HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT For technical questions, contact: [email protected] DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000