SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor® Balanced Series - MS-013 RoHS Pb e3 Description The SIDACtor® Balanced Series MS-013 are designed to protect baseband equipment from overvoltage transients. The patented “Y” configuration ensures balanced overvoltage protection that prevents a longitudinal to differential conversion. The series provides a single port surface mount solution that enables voice through DS-1 equipment to comply with various global requlatory standards. Features and Benefits Agency Approvals Agency Agency File Number 2 5 3 4 6 2 5 3 4 • Meets UL/IEC 60950-1 creepage and clearance • RoHS Compliant and Lead-Free • 2nd level interconnect is Pb-free per IPC/JEDEC J-STD-609A.01 • Fails short circuit when surged in excess of ratings Applicable Global Standards Schematic Symbol 1 • Low voltage overshoot • Does not degrade surge capability after multiple surge events within limit. Pinout Designation 6 • Replaces three discrete components • Low on-state voltage E133083 1 • Balanced overvoltage protection • TIA-968-A • GR 1089 Intra-building • TIA-968-B • IEC 61000-4-5 2nd edition • ITU K.20/21/45 Enhanced Level • YD/T 1082 • ITU K.20/21/45 Basic Level • YD/T 993 • YD/T 950 • GR 1089 Inter-building Electrical Characteristics Part Number Part Marking P1553UALxx P1803UALxx P2103UALxx P2353UALxx P2703UALxx P3203UALxx P3403UALxx P5103UALxx P1553UA P1803UA P2103UA P2353UA P2703UA P3203UA P3403UA P5103UA VDRM @lDRM=5µA VS @100V/µs VDRM @lDRM=5µA VS @100V/µs V min V max V min V max Pins 1 & 6-3, 1 & 6-4 130 150 170 200 230 270 300 420 180 210 250 270 300 350 400 600 Pins 3-4 130 150 170 200 230 270 300 420 180 210 250 270 300 350 400 600 VT IS IT IH V max mA max A max mA min 8 8 8 8 8 8 8 8 800 800 800 800 800 800 800 800 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 150 150 150 150 150 150 150 150 Capacitance See Capacitance Values table Table continues on next page. Notes: - Absolute maximum ratings measured at TA= +25ºC (unless otherwise noted). - Components are bi-directional. - XX = Part Number Suffix: ‘TP’ (Tube Pack) or ‘RP’ (Reel Pack). © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/11/16 SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Electrical Characteristics (continued) Part Number Part Marking P1553UBLxx P1803UBLxx P2103UBLxx P2353UBLxx P2703UBLxx P3203UBLxx P3403UBLxx P5103UBLxx P1553UCLxx P1803UCLxx P2103UCLxx P2353UCLxx P2703UCLxx P3203UCLxx P3403UCLxx P5103UCLxx P1553UB P1803UB P2103UB P2353UB P2703UB P3203UB P3403UB P5103UB P1553UC P1803UC P2103UC P2353UC P2703UC P3203UC P3403UC P5103UC VDRM @lDRM=5µA VS @100V/µs VDRM @lDRM=5µA VS @100V/µs V min V max V min V max Pins 1 & 6-3, 1 & 6-4 130 150 170 200 230 270 300 420 130 150 170 200 230 270 300 420 180 210 250 270 300 350 400 600 180 210 250 270 300 350 400 600 Pins 3-4 130 150 170 200 230 270 300 420 130 150 170 200 230 270 300 420 Capacitance Values Part Number P1553UALxx P1803UALxx P2103UALxx P2353UALxx P2703UALxx P3203UALxx P3403UALxx P5103UALxx P1553UBLxx P1803UBLxx P2103UBLxx P2353UBLxx P2703UBLxx P3203UBLxx P3403UBLxx P5103UBLxx P1553UCLxx P1803UCLxx P2103UCLxx P2353UCLxx P2703UCLxx P3203UCLxx P3403UCLxx P5103UCLxx IS IT IH V max mA max A max mA min 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 Capacitance See Capacitance Values table Additional Information Pin 3-4 Tip-Ring pF min 20 20 15 15 15 15 15 10 25 25 20 20 20 20 15 15 30 30 30 25 25 25 20 20 180 210 250 270 300 350 400 600 180 210 250 270 300 350 400 600 VT pF max 95 85 85 75 75 70 65 60 95 85 85 75 75 70 65 60 95 85 85 75 75 70 65 60 Pins 1 & 6-3, 1 & 6-4 Tip-Ground, Ring-Ground pF min 10 10 10 10 10 10 10 10 15 15 15 15 10 10 10 10 20 15 15 15 15 15 15 10 pF max 60 55 55 50 50 45 45 40 60 55 55 50 50 45 45 40 60 55 55 50 50 45 45 40 Datasheet Resources Samples Note: Off-state capacitance (CO) is measured at 1 MHz with a 2 V bias. © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/11/16 SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Surge Ratings Series IPP ITSM 50/60 Hz di/dt A min A min A/ µs max 45 75 20 500 125 80 100 25 500 175 100 200 50 500 0.2/310 0.5/700 2 2/10 2/10 2 8/20 1.2/50 2 10/160 10/160 2 10/560 1 10/560 2 5/320 1 9/720 2 10/360 1 10/360 2 10/1000 1 10/1000 2 5/310 1 10/700 2 A min A min A min A min A min A min A min A min A 20 150 150 90 50 75 75 B 25 250 250 150 100 100 C 50 500 400 200 150 200 1 1 1 1 - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product that remains in thermal equilibrium. - IPP ratings applicable over temperature range of -40 to +85ºC - The component must initially be in thermal equilibrium with -40°C < TJ < +150°C Notes: 1 Current waveform in µs 2 Voltage waveform in µs Thermal Considerations Package Symbol Parameter Value Unit Modified MS-013 TJ Operating Junction Temperature Range -40 to +150 °C TS Storage Temperature Range -65 to +150 °C R0JA Thermal Resistance: Junction to Ambient 60 °C/W 6 5 4 1 2 3 V-I Characteristics tr x td Pulse Waveform IT IS IH IDRM -V +V VT VDRM VS IPP – Peak Pulse Current – %IPP +I Peak Value 100 tr = rise time to peak value td = decay time to half value Waveform = tr x td 50 Half Value 0 0 td tr t – Time (µs) -I Normalized DC Holding Current vs. Case Temperature 10 IH 8 6 25 °C 4 2 IH (TC = 25ºC) 2.0 14 12 Ratio of Percent of VS Change – % Normalized VS Change vs. Junction Temperature 0 -4 -6 1.8 1.6 1.4 1.0 0.8 0.6 0.4 -8 -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (TJ) – °C © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/11/16 25°C 1.2 -40 -20 0 20 40 60 80 100 120 140 Case Temperature (TC) - ºC 160 SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Soldering Parameters Pb-Free assembly (see Fig. 1) +150°C +200°C 60-180 secs. - Temperature Min (Ts(min)) Pre Heat - Temperature Max (Ts(max)) - Time (Min to Max) (ts) Average ramp up rate (Liquidus Temp (TL) to peak) 3°C/sec. Max. TS(max) to TL - Ramp-up Rate 3°C/sec. Max. Reflow - Temperature (TL) (Liquidus) +217°C - Temperature (tL) 60-150 secs. Peak Temp (TP) +260(+0/-5)°C Time within 5°C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6°C/sec. Max. Time 25°C to Peak Temp (TP) 8 min. Max. Do not exceed +260°C Lead Material Copper Alloy Terminal Finish 100% Matte-Tin Plated UL Recognized epoxy meeting flammability classification V-0 MS-013 Part Marking Drawing_2009-03-05.eps Part Marking (Refer to Electrical Characteristics Table) Date Code XXXXX Part Numbering TYPE P: SIDACtor PACKAGE TYPE Critical Zone TL to TP TL TS(max) tL Ramp-down Preheat TS(min) tS 25 time to peak temperature (t 25ºC to peak) Time High Temp Voltage Blocking 80% Rated VDRM (VAC Peak ) +125°C or +150°C, 504 or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC, JESD22-A-101 Temp Cycling -65°C to +150°C, 15 min. dwell, 10 up to 100 cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased Temp & Humidity 52 VDC (+85°C) 85%RH, 504 up to 1008 hrs. EIA/ JEDEC, JESD22-A-101 High Temp Storage +150°C 1008 hrs. MIL-STD-750 (Method 1031) JEDEC, JESD22-A-101 Low Temp Storage -65°C, 1008 hrs. Thermal Shock 0°C to +100°C, 5 min. dwell, 10 sec. transfer, 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure Cooker Test) +121°C, 100%RH, 2atm, 24 up to 168 hrs. EIA/ JEDEC, JESD22-A-102 Resistance to Solder Heat +260°C, 30 secs. MIL-STD-750 (Method 2031) Moisture Sensitivity Level 85%RH, +85°C, 168 hrs., 3 reflow cycles (+260°C Peak). JEDEC-J-STD-020, Level 1 Packing Options P xxx 3 U x L xx CONSTRUCTION VARIABLE tP Ramp-up Part Marking Code XXXXXXX MEDIAN VOLTAGE TP Environmental Specifications Physical Specifications Body Material Figure 1 Temperature Reflow Condition PACKING OPTIONS Package Type RP: Reel Pack TP: Tube Pack RoHS COMPLIANT IPP RATING U Description Quantity Added Suffix Industry Standard Modified MS-013 6-pin Tape and Reel Pack 1500 RP EIA-481-D TP N/A Modified MS-013 500 6-pin Tube Pack (50 per tube) © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/11/16 SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Dimensions — MS-013 Inches Dimensions Pad Outline C 0.460 (11.68) 0.138 (3.50) D J 7º TYP A Dimension are in inches (and millimeters). 0.059 (1.50) E 7º TYP A B C D E F G H J K BSC* 0.065 (1.65) G H Burr Side 96º A Mold Split Line 4º A 7º TYP BSC* F 7º TYP MIN Length of Flat Detail A K B Max Min Max 0.360 0.352 0.400 0.043 0.047 0.293 0.289 0.089 0.041 0.020 0.133 0.364 0.356 0.412 0.045 0.055 0.297 0.293 0.093 0.049 9.14 8.94 10.16 1.09 1.19 7.44 7.34 2.26 1.04 0.51 3.38 9.25 9.04 10.46 1.13 1.40 7.54 7.44 2.36 1.24 0.143 * BSC = Basic Spacing between Centers Tape and Reel Specification — MS-013 .157 (4.0) .630 (16.0) .472 (12.0) 12.99 (330) .512 (13.0) Arbor Hole Dia. Dimensions are in inches (and millimeters) 0.700 (17.8) Direction of Feed Tube Pack Specification — MS-013 Message Location .045 (1.14) .310 (7.87) 90˚ 6 Interior of the Tube .165 (4.19) .150 (3.81) .225 (5.72) .525 (13.34) © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/11/16 .020 ± .005 WALL TYP. (0.51 ± 0.13) .108 (2.74) .005 A .110 (2.79) A Dimensions are in inches (and millimeters) 20.000 ± .030 (508.00 ± 0.76) Millimeters Min 3.63