Datasheet

Transient Voltage Suppression Diodes
Axial Leaded – 5000W > 5KP-HRA series
5KP-HRA Series
RoHS
Pb e3
Description
Uni-directional
The 5KP-HRA High Reliability Series is designed specifically
to protect sensitive electronic equipment from voltage
transients induced by lightning and other transient voltage
events.
Features
Bi-directional
• Glass passivated chip
junction in P600 package
• 5000W peak pulse
capability at 10/1000μs
waveform, repetition rate
(duty cycles):0.01%
• Fast response time:
typically less than 1.0ps
from 0 Volts to BV min
• Excellent clamping
capability
• Typical failure mode is
short from over-specified
voltage or current
• Whisker test is conducted
based on JEDEC
JESD201A per its table 4a
and 4c
• IEC-61000-4-2 ESD
30kV(Air), 30kV (Contact)
• ESD protection of data
lines in accordance with
IEC 61000-4-2 (IEC801-2)
• EFT protection of data
lines in accordance with
IEC 61000-4-4 (IEC801-4)
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E128662/E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol
Value
Unit
PPPM
5000
W
PD
8.0
W
IFSM
400
A
VF
3.5/5.0
V
TJ , TSTG
-55 to 175
°C
Typical Thermal Resistance Junction
to Lead
RuJL
8.0
°C/W
Typical Thermal Resistance Junction
to Ambient
RuJA
40
°C/W
Peak Pulse Power Dissipation by
10/1000μs Test Waveform (Fig.2)
(Note 1)
Steady State Power Dissipation on
Infinite Heat Sink at TL=75ºC (Fig. 6)
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional
Only (Note 2)
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
Only (Note 3)
Operating Junction and Storage
Temperature Range
• Low incremental surge
resistance
•Typical IR less than 2μA
when VBR min>12V
• High temperature
to reflow soldering
guaranteed: 260°C/40sec
/ 0.375”, (9.5mm) lead
length, 5 lbs., (2.3kg)
tension
• VBR @ TJ= VBR@25°C
x (1+αT x (TJ - 25))
(αT:Temperature
Coefficient, typical value
is 0.1%)
• Plastic package has
underwriters laboratory
flammability classification
94V-O
• Lead-free matte tin plated
package
• Halogen free and RoHS
compliant
Applications
TVS devices are ideal for the protection of I/O interfaces,
VCC bus and other vulnerable circuits used in telecom,
computer, industrial and consumer electronic applications.
Notes:
1. Non-repetitive current pulse , per Fig. 4 and derated above TJ (initial) =25OC per Fig. 3.
2.Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
3.VF < 3.5V for single die parts and VF< 5.0V for stacked-die parts.
Functional Diagram
Bi-directional
Cathode
Anode
Uni-directional
5KP-HRA Series
1
92
©2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/16/15
Transient Voltage Suppression Diodes
Axial Leaded – 5000W > 5KP-HRA series
Electrical Characteristics (T =25°C unless otherwise noted)
A
Part
Number
(Uni)
Part
Number
(Bi)
Reverse
Stand off
Voltage VR
(Volts)
5KP5.0A-HRA
5KP6.0A-HRA
5KP6.5A-HRA
5KP7.0A-HRA
5KP7.5A-HRA
5KP8.0A-HRA
5KP8.5A-HRA
5KP9.0A-HRA
5KP10A-HRA
5KP11A-HRA
5KP12A-HRA
5KP13A-HRA
5KP14A-HRA
5KP15A-HRA
5KP16A-HRA
5KP17A-HRA
5KP18A-HRA
5KP20A-HRA
5KP22A-HRA
5KP24A-HRA
5KP26A-HRA
5KP28A-HRA
5KP30A-HRA
5KP33A-HRA
5KP36A-HRA
5KP40A-HRA
5KP43A-HRA
5KP45A-HRA
5KP48A-HRA
5KP51A-HRA
5KP54A-HRA
5KP58A-HRA
5KP60A-HRA
5KP64A-HRA
5KP70A-HRA
5KP75A-HRA
5KP78A-HRA
5KP85A-HRA
5KP90A-HRA
5KP100A-HRA
5KP110A-HRA
5KP120A-HRA
5KP130A-HRA
5KP150A-HRA
5KP160A-HRA
5KP170A-HRA
5KP180A-HRA
5KP190A-HRA
5KP200A-HRA
5KP210A-HRA
5KP220A-HRA
5KP5.0CA-HRA
5KP6.0CA-HRA
5KP6.5CA-HRA
5KP7.0CA-HRA
5KP7.5CA-HRA
5KP8.0CA-HRA
5KP8.5CA-HRA
5KP9.0CA-HRA
5KP10CA-HRA
5KP11CA-HRA
5KP12CA-HRA
5KP13CA-HRA
5KP14CA-HRA
5KP15CA-HRA
5KP16CA-HRA
5KP17CA-HRA
5KP18CA-HRA
5KP20CA-HRA
5KP22CA-HRA
5KP24CA-HRA
5KP26CA-HRA
5KP28CA-HRA
5KP30CA-HRA
5KP33CA-HRA
5KP36CA-HRA
5KP40CA-HRA
5KP43CA-HRA
5KP45CA-HRA
5KP48CA-HRA
5KP51CA-HRA
5KP54CA-HRA
5KP58CA-HRA
5KP60CA-HRA
5KP64CA-HRA
5KP70CA-HRA
5KP75CA-HRA
5KP78CA-HRA
5KP85CA-HRA
5KP90CA-HRA
5KP100CA-HRA
5KP110CA-HRA
5KP120CA-HRA
5KP130CA-HRA
5KP150CA-HRA
5KP160CA-HRA
5KP170CA-HRA
5KP180CA-HRA
5KP190CA-HRA
5KP200CA-HRA
5KP210CA-HRA
5KP220CA-HRA
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
20.0
22.0
24.0
26.0
28.0
30.0
33.0
36.0
40.0
43.0
45.0
48.0
51.0
54.0
58.0
60.0
64.0
70.0
75.0
78.0
85.0
90.0
100.0
110.0
120.0
130.0
150.0
160.0
170.0
180.0
190.0
200.0
210.0
220.0
Breakdown
Voltage VBR
(Volts) @ IT
MIN
MAX
Test
Current
IT
(mA)
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.00
11.10
12.20
13.30
14.40
15.60
16.70
17.80
18.90
20.00
22.20
24.00
26.70
28.90
31.10
33.30
36.70
40.00
44.40
47.80
50.00
53.30
56.70
60.00
64.40
66.70
71.10
77.80
83.30
86.70
94.40
100.00
110.00
122.00
133.00
144.00
167.00
178.00
189.00
200.00
211.00
222.00
233.00
244.00
7.00
7.37
7.98
8.60
9.21
9.83
10.40
11.10
12.30
13.50
14.70
15.90
17.20
18.50
19.70
20.90
22.10
24.50
26.90
29.50
31.90
34.40
36.80
40.60
44.20
49.10
52.80
55.30
58.90
62.70
66.30
71.20
73.70
78.60
86.00
92.10
95.80
104.00
111.00
123.00
135.00
147.00
159.00
185.00
197.00
209.00
221.00
233.00
246.00
258.00
270.00
50
50
50
50
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
Maximum
Clamping
Voltage
VC @ IPP
(V)
Maximum
Peak
Pulse
Current IPP
(A)
Maximum
Reverse
Leakage
IR @ VR
(µ A)
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103.0
113.0
121.0
126.0
137.0
146.0
162.0
177.0
193.0
209.0
243.0
259.0
275.0
292.0
310.0
329.2
349.5
371.1
554.3
495.1
455.4
425.0
395.3
375.0
354.2
331.2
300.0
280.2
256.3
237.2
219.8
209.0
196.2
184.8
174.7
157.4
143.7
131.1
121.1
112.3
105.4
95.7
87.8
79.1
73.5
70.2
65.9
61.9
58.6
54.5
52.7
49.5
45.1
42.1
40.5
37.2
34.9
31.5
28.8
26.4
24.4
21.0
19.7
18.5
17.5
16.5
15.5
14.6
13.7
5000
5000
2000
1000
250
150
50
20
15
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Agency
Approval
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Note:
1. For bidirectional type having VR of 10 volts and less, the IR limit is double.
5KP-HRA Series
293
©2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/16/15
Transient Voltage Suppression Diodes
Axial Leaded – 5000W > 5KP-HRA series
Screen Process
100% Vision Inspection
MIL-STD-750 method 2074
100% High Temperature Storage Life (168hrs,175°C)
MIL-STD-750 method 1031
100% Temperature Cycle Test (-55 to150°C, 20 cycles, dwell time 15 min)
MIL-STD-750 method 1051
100% Surge Test (2x)
MIL-STD-750 method 4066
100% HTRB 150°C Bias=VR(80% breakdown voltage, 96hrs, and each direction
at 96 hrs for Bi-directional products)
MIL-STD-750 method 1038
Final Electrical Test( 100% 3 sigma limit, 100% dynamic test and PAT limit)
MIL-STD-750 method 4016.4021.4011
Note: Up-screen program can be specified by customer’s request via contacting Littelfuse service
I-V Curve Characteristics
Bi-directional
Uni-directional
Ipp
Vc VBR VR
Vc VBR VR
V
IR VF
IT
IT
IR
IR
IT
V
Ipp
Ipp
PPPM
VR
VBR
VC
IR
VF
VR VBR Vc
Peak Pulse Power Dissipation -- Max power dissipation
Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation
Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (IT)
Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current)
Reverse Leakage Current -- Current measured at VR
Forward Voltage Drop for Uni-directional
Ratings and Characteristic Curves (T =25°C unless otherwise noted)
A
Figure 1 - TVS Transients Clamping Waveform
Figure 2 - Peak Pulse Power Rating Curve
1000
PPPM-Peak Pulse Power (KW)
Voltage Transients
Voltage or Current
Voltage Across TVS
Current Through TVS
TJ initial = Tamb
100
5kW at 10x1000µs, 25°C
10
1
0.001
0.1
1
10
td-Pulse Width (Sec.)
Time
5KP-HRA Series
0.01
3
94
©2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/16/15
Transient Voltage Suppression Diodes
Axial Leaded – 5000W > 5KP-HRA series
Figure 4 - Pulse Waveform
150
100
IPPM- Peak Pulse Current, % IRSM
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage %
Figure 3 - Peak Pulse Power Derating Curve
75
50
25
0
0
25
50
75
100
125
150
175
200
tr=10µsec
Half Value
IPPM IPPM
( )
2
50
0
10/1000µsec. Waveform
as defined by R.E.A
td
1.0
0
2.0
3.0
4.0
t-Time (ms)
Figure 5 - Typical Junction Capacitance
Figure 6 - Typical Transient Thermal Impedance
100
100000
10000
Transient Thermal Impedance (°C/W)
Uni-direconal V=0V
Cj (pF)
Peak Value
IPPM
100
TJ - Initial Junction Temperature (ºC)
Bi-direconal V=0V
Uni-direconal V=VR
1000
100
Bi-direconal V=VR
10
1
1
10
100
10
1
0.1
1000
0.01
VBR - Reverse Breakdown Voltage (V)
0.1
1
10
100
1000
TP - Pulse Duration (s)
Figure 7 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional Only
Figure 8 - Peak Forward Voltage Drop vs Peak Forward
Current (Typical Values)
500
Single die
100
450
IF- Peak Forward Current(A)
IFSM - Peak Forward Surve Current (A)
TJ=25°C
Pulse Width(td) is defined
as the point where the peak
current decays to 50% of IPPM
400
350
300
250
200
150
100
50
10
Stacked-die
1
0.1
0.01
0
1
10
0.0
100
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
VF-Peak Forward Voltage(V)
Number of Cycles at 60 Hz
5KP-HRA Series
1.0
4
95
©2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/16/15
Transient Voltage Suppression Diodes
Axial Leaded – 5000W > 5KP-HRA series
Environmental Specifications
Physical Specifications
Weight
0.07oz., 2.1g
High Temp. Storage
JESD22-A103
Case
P600 molded plastic body over
passivated junction.
HTRB
JESD22-A108
Polarity
Color band denotes the cathode except
Bipolar.
Temperature Cycling
JESD22-A104
Terminal
Matte Tin axial leads, solderable per
JESD22-B102.
H3TRB
JESD22-A101
RSH
JESD22-B106
Dimensions
D
C
A
A
B
Inches
Dimensions
Cathode Band
(for Uni-directional products only)
Min
Millimeters
Max
Min
Max
A
1.000
-
25.40
-
B
0.340
0.360
8.60
9.10
C
0.048
0.052
1.22
1.32
D
0.340
0.360
8.60
9.10
P600
Part Numbering System
Part Marking System
Cathode Band
WITHOUT GROUP B TEST
(for Uni-directional
products only)
HIGH RELIABILITY
F
5KPxxx XX -HR A
YYWW
Trace Code Marking
Littelfuse Logo
TYPE CODE:
A Uni-Directional (5% VBR Voltage Tolerance)
CA Bi-Directional (5% VBR Voltage Tolerance)
5KPXXX-HRA
YY:Year Code
WW: Week Code
Product Type
VR VOLTAGE
SERIES CODE
Packing Options
Part Number
5KPxxxXX-HRA
5KP-HRA Series
Component
Package
Quantity
Packaging
Option
P600
800
Tape & Reel
Packaging Specification
EIA STD RS-296
5
96
©2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/16/15
Transient Voltage Suppression Diodes
Axial Leaded – 5000W > 5KP-HRA series
Tape and Reel Specification
Off Center
either side 2.063+0.079/-0.039
(53.0+2.0/-1.0)
0.028(0.7)
2.56
(65.0)
0.236
(6.0)
0.047
(1.2)
0.394+/-0.020
(10.0+/-0.5)
13.0
(330.2)
Dimensions are in
inches/mm
3.0
(76.2)
0.68
(17.27)
2.75
(69.85)
Recess Depth Max. 0.75 (19.05)
5KP-HRA Series
Direction of Feed
6
97
©2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 03/16/15