PSPSF100 SERIES 96 Watt, AC/DC LED Switching Power Supplies Rev A Wall Industries, Inc. FEATURES E347942 LEVEL3 IP67 • Isolation Class II • 96 Watts Maximum Output Power • RoHS Compliant • PFC Function, PF>0.9 • Fully Isolated Plastic Case with IP67 Level • 90~295VAC Input Voltage Range • Single Outputs • Double Layered PCB • Short Circuit, Over Voltage, and Over Load Protection • Constant Current (CC) & Constant Voltage (CV) Modes • Free Air Convection • Up to 90% High Efficiency • UL8750, IEC/EN 61347-2-13, & IEC/EN 61347-1 Approvals • LED Power Applications DESCRIPTION Size: 5.66 x 2.79 x 1.48 inches 143.8 x 70.8 x 37.5 mm The PSPSF100 series of AC/DC LED switching power supplies provides a maximum power rating of 96W in a 5.66” x 2.79” x 1.48” fully isolated plastic case. These supplies meet IP67 waterproof standards, which makes them suitable for harsh environments in industrial or commercial outdoor lighting applications. The PSPSF100 series consists of single output models with an input voltage range of 90-295VAC. Some features include high efficiency up to 90%, power factor > 0.9, and short circuit, over voltage, and over load protection. The PSPSF100 series has both constant current (CC) and constant voltage (CV) modes and is suitable for LED lighting applications. This series is also RoHS compliant and has UL8750, IEC/EN 61347-1, and IEC/EN 61347-2-13 safety approvals. MODEL SELECTION TABLE Model Number Output Voltage (2) Input Voltage Range PSPSF100-24S Min Output Current Max Output Power Ripple & Noise (1) Efficiency 24 VDC (15.6~24 VDC) 2.6 A 3.5 A (2.6~4.0 A) 96 W 2.7Vp-p 89% 36 VDC (23.4~36 VDC) 1.72 A 2.1 A (1.72~2.65 A) 96 W 5Vp-p 90% PSPSF100-48S 48 VDC (31.2~48 VDC) 1.3 A 1.75 A (1.3~2.0 A) 96 W 5Vp-p 89% PSPSF100-54S 54 VDC (35.1~54 VDC) 1.15 A 1.4 A (1.15~1.77 A) 95.6 W 5Vp-p 90% PSPSF100-36S 90 ~ 295 VAC NOTES 1. Measured at 20MHz bandwidth and with 0.1µF and 47µF capacitors in parallel. 2. Input Voltage = 115VAC or 230VAC. This is suitable operation region for LED related applications but please reconfirm special electrical requirements for some specific system designs. DERATING CURVES Load vs Ambient Temperature Load vs Input Voltage 120 120 Others Under 120VAC 100 80 60 50% Load (%) Load (%) 80 60 40 40 20 20 0 -30 -20 Ta=25°C 100 0 20 40 45 Ambient Temperature (°C) 0 60 70 80 90 120 135 155 230 264 295 Input Voltage (VAC) Note: If the output is not connected to LEDs, the input voltage must be greater than 180VAC 08/06/2013 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 3 Rev A Wall Industries, Inc. PSPSF100 SERIES 96 Watt, AC/DC LED Switching Power Supplies SPECIFICATIONS: PSPSF100 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS INPUT SPECIFICATIONS Input Voltage Input Frequency Inrush Current Power Factor OUTPUT SPECIFICATIONS Output Voltage Voltage Adjustment Setup (CV Mode) Constant Current Operation Voltage (CC Mode) Minimum Load Line Regulation Load Regulation Output Power Ripple & Noise Temperature Coefficient PROTECTION Short Circuit Protection Over Voltage Protection Over Current Protection GENERAL SPECIFICATIONS Efficiency Isolation Voltage Leakage Current ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Humidity Cooling MTBF PHYSICAL SPECIFICATIONS Weight Dimensions (L x W x H) SAFETY & EMC Safety Approvals EMI (Conducted and Radiated Emissions) EMS (Noise Immunity) Harmonic Current Surge Max Unit 295 VAC Hz 50/60 1.4 0.7 A 60 At 115/230 VAC and full load 0.9 PSPSF100-24S PSPSF100-36S PSPSF100-48S PSPSF100-54S PSPSF100-24S PSPSF100-36S PSPSF100-48S PSPSF100-54S 22 33 44 49 15.6 23.4 31.2 35.1 -10 2.6 1.72 1.3 1.15 See Note 2 Voltage Tolerance Preset Current (fixed) (CC Mode) Typ 90 At 115 VAC and full load At 230 VAC and full load Input Current 08/06/2013 Min PSPSF100-24S PSPSF100-36S PSPSF100-48S PSPSF100-54S LL to HL Min load to max load 0~50°C At 230 VAC -4 -5 -0.02 See Table 26.5 39.5 51.5 55 24 36 48 54 +10 3.5 4.0 2.1 2.65 1.75 2.0 1.4 1.77 See Table +4 +5 See Table See Table +0.02 A VDC VDC % A % % %/°C auto-recovery Zener diode clamp auto-recovery At 230 VAC and full load Input to Output At 240 VAC With derating (see derating curve) 25°C (MIL-HDBK-217F) See Table 3750 0.7 -30 -40 +70 +85 95 Free air convection 450,000 VAC mA °C °C % RH hours 1.41 lbs (640g) 5.66 x 2.79 x 1.48 inches (143.8 x 70.8 x 37.5 mm) UL8750, IEC / EN 61347-2-13, IEC / EN 61347-1 EN 55015 EN61547 EN61000-3-2 (at full load), EN 61000-3-3 2KV (L-N), 4KV (L N – FG) Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 3 Wall Industries, Inc. PSPSF100 SERIES 96 Watt, AC/DC LED Switching Power Supplies Rev A BLOCK DIAGRAM I/P EMI FILTER & RECTIFIERS POWER SWITCHING FILTER & RECTIFIERS +V -V DETECTION CIRCUIT O.L.P. PWM CONTROL O.C.P. MECHANICAL DRAWING Unit: inches (mm) 6.45 (163.8) 6.06 (153.8) 5.66 (143.8) AC/L (Brown) AC/N (Blue) +V (Black) -V 0.39 (10.0) 0.13 (3.2) 11.81±0.79 (300.0±20.0) 0.98 (25.0) (Red) 2.79 (70.8) 0.98 (25.0) TOP VIEW 11.81±0.79 (300.0±20.0) 1.48 (37.5) Tolerance: 0.08” (±2mm) COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 08/06/2013 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 3