Flex Mitigation Multilayer Ceramic Capacitors - Hybrid Technology

SOLUTIONS
Flex Mitigation Multilayer
Ceramic Capacitors
Hybrid Technology
Why Choose KEMET
Programs Supported
KEMET applies world-class service and quality
to deliver industry-leading, high performance
capacitance solutions worldwide. With 95% of
possible dielectric solutions, KEMET offers the
world’s most complete line of surface mount
and through-hole capacitor technologies across
tantalum, ceramic, film, aluminum and paper
dielectrics. One world. One KEMET.
• Commercial
• Automotive
KEMET Electrical/Physical Characteristics
Dielectric
Features & Benefits
• Fail open electrode designs
• Low to high capacitance flex mitigation
• Flex mitigation technology inside the chip
and in the termination area
• Provides protection against a low IR or short
circuit condition
• Superior flex performance (up to 5 mm)
• Pb-Free and RoHS compliant
Product Checklist
• Is this a critical and safety relevant circuit?
• Is your circuit board subject to high levels
of board flexure during assembly, mounting
or depanelization?
• Are you placing MLCCs close to the edges
or corners of your board?
• Are MLCCs being placed near or around
connectors or heavy components?
• Do you require a case size smaller than
EIA 0603?
• Is mechanical or thermal stress a concern in
your application?
• Is your application commercial or automotive?
• What are your capacitance requirements?
Case
Sizes
Tolerances
Temperature
Range
Voltage
Options
Capacitance
Values
- 55°C to +125°C
16 – 200 V
1,000 pF – 6.8 µF
- 55°C to +125°C
6.3 – 250 V
180 pF – 0.22 µF
Flexible Termination + Open Mode (FO-CAP)
X7R
0805 - 1812
± 5%, ±10%, ± 20%
Flexible Termination + Floating Electrode (FF-CAP)
X7R
0603 - 1812
± 5%, ± 10%, ± 20%
Flexible Termination +
Open Mode (FO-CAP)
Flexible Termination +
Floating Electrode (FF-CAP)
Ordering Information
Ceramic Case Size Specification/ Capacitance Capacitance Rated Dielectric Failure Termination Packaging/Grade
(L” x W”)
Series
Code (pF) Tolerance Voltage
Rate/Design Finish1
(C-Spec)2
(VDC)
C
C
1
1210
F
0805
1206
1210
1812
J = Flexible
Termination
with Open
Mode
685
K
2 Significant K = ±10%
Digits +
M = ±20%
Number of
Zeros
0805
Y
104
0603
0805
1206
1210
1812
Y=
Flexible
Termination
with
Floating
Electrode
2 Signicant
Digits +
Number of
Zeros
K
3
R
4 = 16 V R = X7R
3 = 25 V
5 = 50 V
1 = 100 V
2 = 200 V
5
R
J = ±5% 9 = 6.3 V R = X7R
K = ±10% 8 = 10 V
M = ±20% 4 = 16 V
3 = 25 V
5 = 50 V
1 = 100 V
2 = 200 V
A = 250 V
A
C
TU
A = N/A
C = 100%
Matte Sn
L = SnPb
(5% min)
Blank = Bulk
TU = 7” Reel
Unmarked
TM = 7” Reel
Marked
AUTO =
Automotive Grade
7”Reel Unmarked
A
C
A = N/A
C = 100%
Matte Sn
L = SnPb
(5% min)
TU
Blank = Bulk
TU = 7” Reel
Unmarked
TM = 7” Reel
Marked
Additional termination finish options may be available. Contact KEMET for details.
SnPb termination finish option is not available on Automotive Grade product.
Additional reeling or packaging options may be available. Contact KEMET for details.
1,2
2
SA0612
Copyright © 2012 KEMET