095 PLL-4TSI Datasheet

095 PLL-4TSI
www.vishay.com
Vishay BCcomponents
Aluminum Electrolytic Capacitors
Power Long Life 4-Terminal Snap-In
FEATURES
• Very long useful life: 10 000 h at 85 °C
• Polarized aluminum electrolytic capacitors,
non-solid electrolyte
• Large types, minimized dimensions, cylindrical
aluminum case, insulated with a blue sleeve
• Pressure relief on the side of the aluminum case
• Temperature range up to 85 °C
• Keyed polarity
• Low ESR, high ripple current capability
• High reliability
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
096
smaller
dimensions
APPLICATIONS
095
•
•
•
•
•
•
Fig. 1
QUICK REFERENCE DATA
DESCRIPTION
Nominal case size
(D x L in mm)
Rated capacitance range CR
Tolerance on CR
Rated voltage range, UR
Category temperature range
Endurance test at 85 °C
Useful life at 85 °C
Useful life at 40 °C,
1.4 x IR applied
Shelf life at 0 V, 85 °C
Max. RMS value of ripple voltage
Based on sectional specification
Climatic category IEC 60068
VALUE
35 x 50 to 45 x 100
Telecommunication and industrial systems
Smoothing and filtering applications
Switched mode power supplies
Renewable energy power converters
Energy storage in pulse systems
For excellent mounting stability
MARKING
390 μF to 2200 μF
± 20 %
350 V to 450 V
-40 °C to +85 °C
3000 h
10 000 h
The capacitors are marked (where possible) with the
following information:
• Rated capacitance (in μF)
• Tolerance code on rated capacitance, code letter in
accordance with IEC 60062 (M for ± 20 %)
• Rated voltage (in V)
• Date code (YYMM)
• Name of manufacturer
• Code for factory of origin
• “-” sign to identify the negative terminal, visible from the
top and side of the capacitor
• Code number
• Climatic category in accordance with IEC 60068
400 000 h
1000 h
12 V
IEC 60384-4 / EN130300
40/085/56
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
UR (V)
CR
(μF)
350
400
420
390
-
-
-
470
-
35 x 50
40 x 40
35 x 50
40 x 40
560
35 x 50
35 x 60
680
35 x 60
40 x 50
35 x 60
45 x 40
35 x 70
40 x 60
45 x 50
820
35 x 70
40 x 60
35 x 80
40 x 60
35 x 80
40 x 60
45 x 50
40 x 80
45 x 70
40 x 100
45 x 100
35 x 100
40 x 70
45 x 60
40 x 100
45 x 80
45 x 100
-
1000
1500
1800
2200
Revision: 21-May-15
35 x 70
40 x 60
45 x 50
35 x 80
40 x 70
45 x 50
35 x 100
40 x 80
45 x 60
40 x 100
45 x 80
45 x 100
-
450
35 x 50
40 x 40
35 x 60
40 x 50
45 x 40
35 x 70
40 x 60
35 x 80
40 x 60
45 x 50
40 x 70
45 x 60
40 x 100
45 x 70
45 x 100
-
Document Number: 28393
1
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
095 PLL-4TSI
www.vishay.com
Vishay BCcomponents
DIMENSIONS in millimeters AND AVAILABLE FORMS
PRINTED WIRING
2.5
1
3
2
2
L
3
-
Ø D + 1 max.
15 ± 0.1
1
L + 5 max.
1.3
(4 x)
7.5 ± 0.1
4.9 ± 0.2
CCA976-1
17.5 ± 0.1
Fig. 2 - Printed wiring pin version
(Case Ø D = 35 mm)
Fig. 3 - Mounting hole diagram viewed from component side
(Case Ø D = 35 mm)

2.5
1
4
-
3
2
3
-
Ø D + 1 max.
2
4
20 ± 0.1
1
L + 5 max.
L
1.3 (5 x)
10 ± 0.1
17.5 ± 0.1
20 ± 0.1
4.9 ± 0.2
Fig. 4 - Printed wiring pin version
(Case Ø D = 40 mm)
Fig. 5 - Mounting hole diagram viewed from component side
(Case Ø D = 40 mm)
FOUR TERMINAL SNAP-IN
60°
60°
60°
B
60°
A
C
dummy
dummy
ØD
22.5 ± 0.1
2 ± 0.1
(4 x)
22.5
Lmax.
Bottom view
6.3 ± 1
Dummy terminals (A and C) must be free from the electrical circuit
Fig. 6 - 4-Terminal snap-in
Fig. 7 - Mounting hole diagram
Pin number 1 is the positive terminal. Pin “-” is the negative terminal.
Pin numbers 2, 3 and 4 (if present) should be free from the electrical circuit or connected to the minus terminal.
Revision: 21-May-15
Document Number: 28393
2
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
095 PLL-4TSI
www.vishay.com
Vishay BCcomponents
Table 1
DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES
NOMINAL
CASE SIZE
ØDxL
Ø Dmax.
4T-SI
Lmax.
PW
L+5
MASS
(g)
PACKAGING QUANTITIES
(units per box)
CARDBOARD BOX
DIMENSIONS
LxWxH
35 x 50
36
52
55
72
50
390 x 198 x 60
35 x 60
36
62
65
91
50
390 x 198 x 70
35 x 70
36
72
75
103
50
377 x 375 x 97
35 x 80
36
82
85
115
50
377 x 375 x 107
35 x 100
36
102
105
151
50
377 x 375 x 127
40 x 40
41
42
45
70
50
440 x 223 x 60
40 x 50
41
52
55
94
50
440 x 223 x 70
40 x 60
41
62
65
118
25
230 x 230 x 80
40 x 70
41
72
75
134
25
230 x 230 x 90
40 x 80
41
82
85
150
25
230 x 230 x 100
40 x 100
41
102
105
176
25
230 x 230 x 120
45 x 40
46
42
-
88
36
TBD
45 x 50
46
52
-
119
36
377 x 375 x 77
45 x 60
46
62
-
150
36
377 x 375 x 87
45 x 70
46
72
-
170
36
377 x 375 x 97
45 x 80
46
82
-
190
36
377 x 375 x 107
45 x 100
46
102
-
250
36
377 x 375 x 127
ORDERING EXAMPLE
ELECTRICAL DATA
SYMBOL
Electrolytic capacitor 095 series
1000 μF/450 V;
Nominal case size: Ø 40 mm x 100 mm
DESCRIPTION
CR
Rated capacitance at 100 Hz
IR
Rated RMS ripple current at 100 Hz and 85 °C
IL5
Max. leakage current after 5 min at UR
4-terminal snap-in:
Max. equivalent series resistance at 100 Hz
Ordering code: MAL2 095 27102 E3 
Former 12NC: 2222 095 27102
ESR
Z
Max. impedance at 10 kHz
Note
• Unless otherwise specified, all electrical values in Table 2 apply
at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %
Printed wiring:
Ordering code: MAL2 095 77102 E3 
Former 12NC: 2222 095 77102
Table 2
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
CR
100 Hz
(μF)
NOMINAL
CASE SIZE
ØDxL
(mm)
IR
100 Hz
85 °C
(A)
IL5
5 min
(μA)
ESRmax.
100 Hz
(m)
Zmax.
10 kHz
(m)
4T-SI
PW
350
560
680
680
820
820
1000
1000
1000
1500
1500
1800
2200
35 x 50
35 x 60
40 x 50
35 x 70
40 x 60
35 x 80
40 x 60
45 x 50
40 x 80
45 x 70
40 x 100
45 x 100
3.4
4.0
4.1
4.5
4.6
5.1
5.0
5.0
6.5
6.5
7.5
8.6
396
480
480
578
578
704
704
704
1054
1054
1264
1544
196
162
165
135
137
112
116
121
79
82
66
57
120
99
102
82
85
68
73
78
50
53
42
37
15561E3
15681E3
25681E3
15821E3
25821E3
15102E3
25102E3
35102E3
25152E3
35152E3
25182E3
35222E3
65561E3
65681E3
75681E3
65821E3
75821E3
65102E3
75102E3
75152E3
75182E3
-
Revision: 21-May-15
ORDERING CODE
MAL2095.......
Document Number: 28393
3
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
095 PLL-4TSI
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
400
420
450
CR
100 Hz
(μF)
NOMINAL
CASE SIZE
ØDxL
(mm)
IR
100 Hz
85 °C
(A)
IL5
5 min
(μA)
ESRmax.
100 Hz
(m)
Zmax.
10 kHz
(m)
4T-SI
PW
470
470
560
560
680
680
680
820
820
1000
1000
1000
1500
1500
1800
470
470
560
680
680
680
820
820
820
1000
1000
1000
1500
1500
1800
390
390
470
470
470
560
560
680
680
680
820
820
1000
1000
1200
1500
35 x 50
40 x 40
35 x 60
45 x 40
35 x 70
40 x 60
45 x 50
35 x 80
40 x 60
35 x 100
40 x 70
45 x 60
40 x 100
45 x 80
45 x 100
35 x 50
40 x 40
35 x 60
35 x 70
40 x 60
45 x 50
35 x 80
40 x 70
45 x 50
35 x 100
40 x 80
45 x 60
40 x 100
45 x 80
45 x 100
35 x 50
40 x 40
35 x 60
40 x 50
45 x 40
35 x 70
40 x 60
35 x 80
40 x 60
45 x 50
40 x 70
45 x 60
40 x 100
45 x 70
40 x 100
45 x 100
3.2
3.0
3.7
3.2
4.1
4.3
4.3
4.7
4.6
5.9
5.2
5.4
7.2
6.7
7.9
3.1
3.0
3.6
4.1
4.3
4.3
4.6
4.8
4.6
5.8
5.4
5.4
7.2
6.7
7.8
2.9
2.8
3.4
3.5
3.0
3.8
4.0
4.3
4.3
4.3
4.8
5.0
6.0
5.6
6.4
7.4
380
380
452
452
548
548
548
660
660
804
804
804
1204
1204
1444
399
399
474
575
575
575
693
693
693
844
844
844
1264
1264
1516
355
355
427
427
427
508
508
616
616
616
742
742
904
904
1084
1354
215
222
180
192
149
151
156
125
129
102
107
110
72
75
63
232
238
194
161
163
167
134
136
143
110
112
117
77
80
67
246
253
204
208
217
172
174
143
147
153
123
126
99
104
85
71
126
132
105
116
87
89
93
73
77
60
64
67
43
47
38
141
147
119
98
100
104
82
84
91
67
69
75
48
51
43
142
148
118
121
129
99
101
82
87
91
72
76
57
63
50
42
16471E3
26471E3
16561E3
36561E3
16681E3
26681E3
36681E3
16821E3
26821E3
16102E3
26102E3
36102E3
26152E3
36152E3
36182E3
14471E3
24471E3
14561E3
14681E3
24681E3
34681E3
14821E3
24821E3
34821E3
14102E3
24102E3
34102E3
24152E3
34152E3
34182E3
17391E3
27391E3
17471E3
27471E3
37471E3
17561E3
27561E3
17681E3
27681E3
37681E3
27821E3
37821E3
27102E3
37102E3
27122E3
37152E3
66471E3
76471E3
66561E3
66681E3
76681E3
66821E3
76821E3
66102E3
76102E3
76152E3
64471E3
74471E3
64561E3
64681E3
74681E3
64821E3
74821E3
64102E3
74102E3
74152E3
67391E3
77391E3
67471E3
77471E3
67561E3
77561E3
67681E3
77681E3
77821E3
77102E3
77122E3
-
Revision: 21-May-15
ORDERING CODE
MAL2095.......
Document Number: 28393
4
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
095 PLL-4TSI
www.vishay.com
Vishay BCcomponents
ADDITIONAL ELECTRICAL DATA
PARAMETER
CONDITIONS
VALUE
 350 V versions
Us = 1.1 x UR
Voltage
Surge voltage
Urev  1
Reverse voltage
Current
Leakage current
After 1 min at UR
IL1  0.006 CR x UR + 4 μA
After 5 min at UR
IL5  0.002 CR x UR + 4 μA
All case sizes
Ca. 20 nH
Inductance
Equivalent series inductance (ESL)
RIPPLE CURRENT AND USEFUL LIFE
CCC205-05
2.6
2.4
2.2
IA
IR
2.0
1.8
1.6
1.4
lifetime multiplier
1.2
(1)
1.0
5
1.
2.0
0
3.
0
4.
0
6.
10
20
30
1.0
0.8
40
IA = Actual ripple current at 100 Hz
IR = Rated ripple current at 100 Hz and 85 °C
(1)
Useful life at 85 °C and IR applied: 10 000 h
0.5
0.0
40
50
60
70
80
90
Tamb (°C)
100
Fig. 8 - Multiplier of useful life as a function of ambient temperature and ripple current load
Table 3
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
Revision: 21-May-15
FREQUENCY
(Hz)
IR MULTIPLIER
50
0.9
100
1.0
200
1.2
400
1.3
1000
1.4
10 000
1.5
Document Number: 28393
5
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
095 PLL-4TSI
www.vishay.com
Vishay BCcomponents
Table 4
TEST PROCEDURES AND REQUIREMENTS
TEST
NAME OF TEST
Endurance
REFERENCE
IEC 60384-4/
EN130300
subclause 4.13
PROCEDURE
REQUIREMENTS
Tamb = 85 °C; UR applied; 
3000 h
C/C: ± 10 %
ESR  1.3 x spec. limit
Z  2 x spec. limit
IL5  spec. limit
Useful life
CECC 30301
subclause 4.13
Tamb = 85 °C; UR and IR applied; 
10 000 h
C/C: ± 30 %
ESR  3 x spec. limit
Z  3 x spec. limit
IL5  spec. limit
no short or open circuit,
no visible damage
total failure percentage  3 %
Shelf life
IEC 60384-4/
EN130300
subclause 4.17
Tamb = 85 °C; no voltage applied;
1000 h

after test: UR to be applied for 30 min 24 h to 48 h
before measurement
C/C: ± 10 %
ESR  1.2 x spec. limit
IL5  2 x spec. limit
Revision: 21-May-15
Document Number: 28393
6
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000