AS186_302LF_200104E.pdf

DATA SHEET
AS186-302LF: GaAs IC High-Isolation Positive Control SPDT
Nonreflective Switch LF to 4 GHz
Applications
 GSM, PCS, WCDMA, 2.4 GHz ISM and 3.5 GHz wireless local
loop
V1
Features
V2
J2
 Positive voltage control (0/3 to 0/5 V)
 High isolation (55 dB @ 0.9 GHz and 1.9 GHz)
J1
 Three-switch solution for base station synthesizer switch
J3
 Nonreflective
 Operation to 6 GHz
Y1868
 Miniature lead (Pb)-free and RoHS-compliant MSOP-8 exposed
pad package (MSL-1 @ 260 C per JEDEC J-STD-020)
Figure 1. AS186-302LF Functional Block Diagram
Description
TM
Skyworks Green products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of GreenTM, document number
SQ04–0074.
8
J2
7
GND
6
GND
5
4
GND
3
J1
2
V2
1
V1
J3
The AS186-302LF is a GaAs FET IC SPDT nonreflective switch,
packaged in an MSOP-8 exposed pad plastic package for lowcost, high-isolation commercial applications.
A functional block diagram for the AS186-302LF is shown in
Figure 1. This device is available in an ultra-miniature SOT-6
package. The pin configuration and package are shown in
Figure 2. Signal pin assignments and functional pin descriptions
are provided in Table 1.
Y1869
CBL = 47 pF for operation > 500 MHz
Figure 1. AS186-302LF Pinout Diagram
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
200104E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • April 10, 2015
1
DATA SHEET • AS186-302LF: POSITIVE CONTROL SPDT NONREFLECTIVE SWITCH
Table 1. AS186-302LF Signal Descriptions
Pin
Name
Description
Pin
Name
5
Description
1
V1
DC control voltage
2
V2
DC control voltage
6
GND
Ground
3
J1
RF output
7
GND
Ground
4
GND
Ground
8
J2
RF output
Electrical and Mechanical Specifications
J3
RF output
Typical performance characteristics of the AS186-302LF are
shown in Figures 2 through 8.
The absolute maximum ratings of the AS186-302LF are provided
in Table 2. Electrical specifications are provided in Tables 3
through 6. The truth table is shown in Table 7.
Table 2. Absolute Maximum Ratings (Note 1)
Parameter
RF input power (VCTL = 0/8 V)
Symbol
Minimum
Typical
Maximum
Units
1
W
mW
PIN
f > 500 MHz
f < 500 MHz
100
Control voltage
VCTL
–0.2
8
V
Operating temperature
TOP
–40
+85
C
Storage temperature
TSTG
–65
+150
C
Electrostatic discharge:
ESD
500
V
Human Body Model (HBM), Class 1A
Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected]com • www.skyworksinc.com
2
April 9, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200104E
DATA SHEET • AS186-302LF: POSITIVE CONTROL SPDT NONREFLECTIVE SWITCH
Table 3. Electrical Specifications (Note 1)
(–40 C ≤ TOP ≤ +85 C, VCTL = 0/5 V, ZO = 50 , Unless Otherwise Noted)
Parameter
Symbol
Test Condition
Minimum
Typical
Maximum
Units
0.8
0.9
1.0
1.05
1.15
1.25
dB
dB
dB
Insertion loss
IL
LF to 2 GHz
LF to 3 GHz
LF to 4 GHz
Isolation (Note 2)
ISO
LF to 2 GHz
LF to 3 GHz
LF to 4 GHz
VSWR (On state)
VSWR
LF to 2 GHz
LF to 4 GHz
1.3:1
1.3:1
1.5:1
1.6:1
VSWR (Off state)
VSWR
0.5 to 4 GHz
1.35:1
1.7:1
dB
dB
dB
55
50
40
50
45
35
Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
Note 2: Backside of exposed pad must be connected to RF ground to obtain specified isolation.
Table 4. Electrical Specifications: Operating Characteristics
(–40 C < TOP < +85 C, VCTL = 0/5 V, ZO = 50 , Unless Otherwise Noted)
Parameter
Symbol
Test Condition
Minimum
Typical
Maximum
Units
0.2
5 (@ 200 A)
V
V
Control voltages
Low @ 20 A max
High
VCTL_L
VCTL_H
Input power for 1 dB compression
IP1dB
0
3 (@ 100 A)
0.9 to 4 GHz:
VCTL = 0/3 V
VCTL = 0/5 V
Input third order intermodulation
intercept point
IIP3
23
27
25
30
dBm
dBm
27
42
38
46
dBm
dBm
30
50
25
ns
ns
mV
25
C/W
0.9 to 4 GHz, for two-tone input power 8 dBm:
VCTL = 0/3 V
VCTL = 0/5 V
Switching characteristics:
tR, tF
tON, tOFF
VFT
Rise, fall time
On, off time
Video feedthru
10/90% or 90/10% RF
50% CTL to 90/10% RF
tR = 3 ns, BW = 500 MHz
JA
Thermal resistance
Table 5. Compression Point vs Voltage and Temperature @ 900 MHz
Control voltage (V)
Temperature (C)
Input Power @ 1 dB Compression (dBm)
Input Power @ 0.1 dB Compression (dBm)
3
–40
20.5
16.5
3
+25
20
15.3
3
+85
19
14
5
–40
28.5
23
5
+25
28
23
5
+85
27.5
23
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
200104E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • April 9, 2015
3
DATA SHEET • AS186-302LF: POSITIVE CONTROL SPDT NONREFLECTIVE SWITCH
Table 6. IP3 vs Voltage and Temperature @ Tone Frequency: 900 and 901 MHz
Control voltage (V)
Temperature (C)
IP3 @ 8 dBm Each Tone (dBm)
3
–40
44
3
+25
38
3
+85
29.5
5
–40
47.5
5
+25
46.5
5
+85
45.5
Table 7. Truth Table (Note 1)
V1
V2
J1 to J2
J1 to J3
0
VHIGH
Isolation
Insertion loss
VHIGH
0
Insertion loss
Isolation
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
4
April 10, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200104E
DATA SHEET • AS186-302LF: POSITIVE CONTROL SPDT NONREFLECTIVE SWITCH
Typical Performance Characteristics
(–40 C ≤ TOP ≤ +85 C, VCTL = 0/5 V, Zo = 50 , Unless Otherwise Noted)
0
0
-0.5
J1 to J2
-1.0
Insertion Loss (dB)
J1 to J3
-1.5
-2.0
–40 °C
-1.5
-2.0
85 °C
ts495
-3.0
0
1
2
3
4
5
ts496
-2.5
-2.5
-3.0
0
6
1
0
0
-10
-10
-20
-20
Isolation (dB)
4
5
6
J1 to J3
-40
J1 to J2
-50
-30
85 °C
-40
25 °C
-50
-60
ts497
-60
-70
0
1
2
3
4
5
ts498
Isolation (dB)
3
Figure 3. Insertion Loss vs Frequency at −40, 25, 85 C
Figure 2. Insertion Loss vs Frequency
-30
2
Frequency (GHz)
Frequency (GHz)
–40 °C
-70
0
6
1
2
3
4
5
6
Frequency (GHz)
Frequency (GHz)
Figure 5. Isolation vs Frequency at −40, 25, 85 C
Figure 4. Isolation vs Frequency
2.50
2.50
J3 Off
2.25
2.25
2.00
VSWR
2.00
J2 On
1.75
1.75
1.50
1.50
1.25
1.25
ts499
VSWR
25 °C
-1.0
J3 On
1.00
0
1
2
3
4
Frequency (GHz)
Figure 6. VSWR vs Frequency
5
6
–40 °C
85 °C
25 °C
ts500
Insertion Loss (dB)
-0.5
1.00
0
1
2
3
4
5
6
Frequency (GHz)
Figure 7. VSWR vs Frequency at −40, 25, 85 C (J3 Off)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
200104E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • April 9, 2015
5
DATA SHEET • AS186-302LF: POSITIVE CONTROL SPDT NONREFLECTIVE SWITCH
2.50
2.25
1.75
1.50
85 °C
25 °C
1.25
ts501
VSWR
2.00
–40 °C
1.00
0
1
2
3
4
5
6
Frequency (GHz)
Figure 8. Input VSWR vs Frequency at −40, 25, 85 C
Package Information
For tape and reel information, refer to the “Discrete Devices and
IC Switch/Attenuators Tape and Reel Package Orientation”
Application Note.
The MSOP-8 exposed pad plastic package is shown in Figure 9.
For the recommended solder reflow profiles, refer to the
“Recommended Solder Reflow Profile” Application Note.
0.122 (3.09 mm)
0.114 (2.89 mm)
8
0.0256
(0.650 mm)
Typ
0.072 (1.83 mm)
0.062 (1.57 mm)
0.073
(1.85 mm)
0.063
(1.60 mm)
0.122
(3.09 mm)
0.114
(2.89 mm)
1
Pin 1
Indicator
Exposed
Paddle
0.200 (5.08 mm)
0.114 (4.67 mm)
0.044
(1.12 mm) Max
0.012 (0.30 mm)
0.008 (0.20 mm)
0.006 (0.15 mm)
0.002 (0.05 mm)
Y1870
Figure 9. MSOP-8 Exposed Pad Package Dimension Drawing
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
6
April 10, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200104E
DATA SHEET • AS186-302LF: POSITIVE CONTROL SPDT NONREFLECTIVE SWITCH
Copyright © 2002-2007, 2009-2015 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions
of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for
identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by
reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
200104E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • April 9, 2015
7