Rev. F FEATURES ● Low Ripple & Noise ● 1600VDC I/O Isolation ● External ON/OFF Control ● High Efficiency up to 85% ● RoHS Directive Compliant ● 2:1 Wide Input Voltage Range ● UL94-V0 Case Potting Materials ● Continuous Short Circuit Protection ● SIP Package: 0.86 x 0.36 x 0.44 Inches ● ISO9001 Certified Manufacturing Facilities ● No External Input or Output Capacitor Needed ● UL60950-1, EN60950-1, and IEC60950-1 Licensed ● 3000VDC I/O Isolation Available (See LANEW3 “H” series) ● CE Mark Meets 2006/95/EC, 93/68/EEC and 2004/108/EC LANEW3 Series 3 Watt DC/DC Converter Single and Dual Outputs 2:1 Wide Input Voltage Range APPLICATIONS ● Telecom/Datacom ● Wireless Networks ● Industry Control Systems ● Measurement Equipment ● Semiconductor Equipment DESCRIPTION The LANEW3 Series offers 3 watts of output power from a 0.86 x 0.36 x 0.44 inch package without derating up to 71ºC. The LANEW3 Series has a 2:1 wide input voltage range of 4.5-9, 9-18, 18-36 and 36-75VDC, it features 1600VDC I/O isolation, remote on/off, and short-circuit protection. All models are ideally suited for telecommunications, mobile telecom, test equipment, and industrial applications. For 3000VDC I/O isolation see the LANEW3 “H” Series. SPECIFICATIONS: LANEW3 Series All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS 5V nominal input 4.5 – 9 VDC 12V nominal input 9 – 18 VDC Input Voltage Range 24V nominal input 18 – 36 VDC 48V nominal input 36 – 75 VDC Input Current See Table Input Filter Capacitor Type 5V nominal input 15 VDC 12V nominal input 36 VDC Input Surge Voltage (100ms max) 24V nominal input 50 VDC 48V nominal input 100 VDC 5V nominal input 400mAp-p 12V nominal input 150mAp-p Input Reflected Ripple Current 24V nominal input 380mAp-p 48V nominal input 170mAp-p Start Up Time Power Up 30ms typ (Nominal Vin and constant resistive Load) Remote ON/OFF 30ms typ Open or high impedance DC-DC ON Control pin applied current DC-DC OFF 2 ~ 4mA max (via 1KΩ) Remote OFF Input Current (nominal input) 2.5mA max Application Circuit Remote ON/OFF OUTPUT SPECIFICATIONS Output Voltage Voltage Accuracy Line Regulation Load Regulation Cross Regulation (Dual) Minimum Load Output Power Ripple & Noise (See Note 4) Transient Response Recovery Time PROTECTION Short Circuit Protection Full load and nominal Vin Low line to high line at full load Single Output (no load to full load) 5% load to 100% load Dual Output (no load to full load) Asymmetrical load 25% / 100% FL 20MHz bandwidth 25% load step change See Table ±1% ±0.2% ±1% ±0.5% ±1% ±5% 0% 3 Watts max. 50mVp-p 500μs typ. Continuous, automatic recovery Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 LANEW3 Series 3 Watt DC/DC Converter Single and Dual Outputs 2:1 Wide Input Voltage Range Rev. F SPECIFICATIONS (CONTINUED) GENERAL SPECIFICATIONS Efficiency Switching Frequency Full load to minimum load LANEW3 Series Lanew3 H Series (“H” suffix) Isolation Voltage (input to output) Isolation Resistance LANEW3 Series Lanew3 H Series (“H” suffix) Isolation Capacitance See Table 100KHz, min. 1600VDC, min. 3000VDC, min 10GΩ min. 200pF max. 30pF max. ENVIRONMENTAL SPECIFICATIONS -40°C ~ +71°C (without derating) +71°C ~+100°C (with derating) -55°C to +105°C 5% to 95% RH MIL-STD-810F MIL-STD-810F ±0.02% / °C max. 4,386,000 Hours 2,401,000 Hours Operating Temperature Storage Temperature Relative Humidity Thermal Shock Vibration Temperature Coefficient MTBF (see Note 1) Bellcore TR-NWT-000332 MIL-HDBK-217F PHYSICAL SPECIFICATIONS Weight 4.8 grams (0.17oz) 0.86(L) x 0.36(W) x 0.44(H) inches 21.8(L) x 9.1(W) x 11.1(H) mm Non-conductive black plastic None Silicon (UL94-V0) Dimensions Case Material Base Material Potting Material SAFETY & EMC Safety Standards and Approvals EMI (See Note 6) EN55022 ESD EN61000-4-2 Radiated Immunity Fast Transient (See Note 7) Surge (See Note 7) Conducted Immunity EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 IEC60950-1, UL60950-1, EN60950-1 Class A Air ± 8KV Contact ± 6KV 10V/m ± 2KV ± 1KV 10Vr.m.s. DERATING CURVES Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A LANEW3 Series 3 Watt DC/DC Converter Single and Dual Outputs 2:1 Wide Input Voltage Range Rev. F OUTPUT VOLTAGE / CURRENT RATING CHART Model Number LANEW533R3 LANEW505R3 LANEW509R3 LANEW512R3 LANEW515R3 LANEW505RD3 LANEW512RD3 LANEW515RD3 LANEW1233R3 LANEW1205R3 LANEW1209R3 LANEW1212R3 LANEW1215R3 LANEW1205RD3 LANEW1212RD3 LANEW1215RD3 LANEW2433R3 LANEW2405R3 LANEW2409R3 LANEW2412R3 LANEW2415R3 LANEW2405RD3 LANEW2412RD3 LANEW2415RD3 LANEW4833R3 LANEW4805R3 LANEW4809R3 LANEW4812R3 LANEW4815R3 LANEW4805RD3 LANEW4812RD3 LANEW4815RD3 Input Range 5 VDC (4.5 – 9 VDC) 12 VDC (9 – 18 VDC) 24 VDC (18 – 36 VDC) 48 VDC (36 – 75 VDC) Output Voltage 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC Output Current 700mA 600mA 333mA 250mA 200mA ±300mA ±125mA ±100mA 700mA 600mA 333mA 250mA 200mA ±300mA ±125mA ±100mA 700mA 600mA 333mA 250mA 200mA ±300mA ±125mA ±100mA 700mA 600mA 333mA 250mA 200mA ±300mA ±125mA ±100mA Input Current No load (3) Full load (2) 113mA 670mA 75mA 822mA 83mA 811mA 83mA 800mA 53mA 790mA 45mA 822mA 135mA 800mA 120mA 790mA 45mA 275mA 45mA 338mA 45mA 333mA 45mA 329mA 53mA 325mA 75mA 329mA 60mA 325mA 60mA 325mA 23mA 138mA 10mA 169mA 23mA 167mA 26mA 164mA 20mA 162mA 20mA 164mA 24mA 162mA 24mA 162mA 11mA 69mA 12mA 84mA 8mA 83mA 8mA 82mA 18mA 81mA 12mA 82mA 12mA 81mA 15mA 81mA Efficiency (4) 73% 77% 78% 79% 80% 77% 79% 80% 74% 78% 79% 80% 81% 80% 81% 81% 74% 78% 79% 80% 81% 80% 81% 81% 74% 78% 79% 80% 81% 80% 81% 81% Capacitor (5) Load max 1760uF 1000uF 470uF 170uF 110uF ±470uF ±100uF ±47uF 1760uF 1000uF 470uF 170uF 110uF ±470uF ±100uF ±47uF 1760uF 1000uF 470uF 170uF 110uF ±470uF ±100uF ±47uF 1760uF 1000uF 470uF 170uF 110uF ±470uF ±100uF ±47uF NOTES 1. BELLCORE TR-NWT-000332. Case: 50% Stress, Temperature at 40ºC. MIL-HDBK-217F Notice2 @ Ta = 25°C, Full Load (Ground fixed and controlled environment). 2. Maximum value at nominal input voltage and full load. 3. Typical value at nominal input voltage and no load. 4. Typical value at nominal input voltage and full load. 5. Test by minimum Vin and constant resistive load. 6. The LANEW3 series meets EN55022 Class A with an external L-C filter before the input pins on the converter. (Connect networks according to the Class B figure) Recommended: 05Vin: C1 = 2.2μF/10V 001206MLCC L1 = 3.3μF 0504 SMD Inductor P/N: PMT-044 12Vin: C1 = 0.68μF/25V 01206MLCC L1 = 10μF 0504 -SMD Inductor P/N: PMT-047 24Vin: C1 = 4.7μF/50V 001210MLCC L1 = 10μF 0504 -SMD Inductor P/N: PMT-047 48Vin: C1 = 0.47μF/100V 1812MLCC L1 = 56μF 0504 -SMD Inductor P/N: PMT-045 7. The external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor suggested is Nippon chemi-con KY series, 220μF/100V, ESR 48mΩ. 8. For 3000VDC input/output isolation see the LANEW3 “H” Series. *Due to advances in technology, specifications are subject to change without notice. Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 LANEW3 Series 3 Watt DC/DC Converter Single and Dual Outputs 2:1 Wide Input Voltage Range Rev. F MECHANICAL DRAWING Unit: inches (mm) Pin Connection (Standard Models) Pin 1 2 3 5 6 7 8 Single Output -INPUT +INPUT CTRL NC +OUTPUT -OUTPUT NC Dual Output -INPUT +INPUT CTRL NC +OUTPUT COMMON -OUTPUT Pin Connection (3000VDC Isolation Models) Pin 1 2 3 5 6 7 8 Single Output -INPUT +INPUT CTRL NO PIN +OUTPUT -OUTPUT NC Dual Output -INPUT +INPUT CTRL NO PIN +OUTPUT COMMON -OUTPUT Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) Pin pitch tolerance: ±0.01 (0.25) Pin dimension tolerance: ±0.004 (0.1) Recommended Filter for EN55022 Class B Compliance Recommended EN55022 Class B Filter Circuit Layout The components used in the figure above are as follows LANEW5xxx LANEW12xxx LANEW24xxx LANEW48xxx C1 10μF/10V 1206 MLCC 2.2μF/25V 1206 MLCC 6.8μF/50V 1812 MLCC 2.2μF/100V 1812 MLCC L1 3.3μH 0504 SMD Inductor PMT-044 18μH 0504 SMD Inductor PMT-046 18μH 0504 SMD Inductor PMT-046 56μH 0504 SMD Inductor PMT-045 Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797