Medium Power Amplifier RF AMPLIFIER MODEL BXMP1002 Available as: Features ! ! ! ! FPMP1002, 4 Pin .5” Sq. Flatpack WPMP1002, 8 Pin .5” Sq. Surface Mount - Gullwing BXMP1002, SMA Connectorized Housing Typical Intermodulation Performance at 25 º C High Output Power: +30.5 dBm Typical High Third Order Intercept: +45 dBm Typical Operating Temp. - 55 ºC to +85 ºC Environmental Screening Available Second Order Harmonic Intercept Point ....... +60 dBm (Typ.) Second Order Two Tone Intercept Point ........ +54 dBm (Typ.) Third Order Two Tone Intercept Point ............ +45 dBm (Typ.) Maximum (No Damage) Ratings Specifications CHARACTERISTIC TYPICAL Ta= 25 ºC 10 - 100 MHz MIN/MAX Ta = -55 ºC to +85 ºC 10 - 100 MHz 10 8.5 +30.5 +30 Min. -17 -16 Max. In Out Noise figure (dB) 1.8:1 1.8:1 5.5 2.0:1 Max. 2.0:1 Max. 6.0 Max. Power +15 320 +15 365 Frequency Gain (dB) Power @ 1 dB Comp. (dBm) Reverse Isolation (dB) VSWR Vdc mA Ambient Operating Temperature .............. -55ºC to + 100 ºC Storage Temperature ............................... -62ºC to + 125 ºC Case Temperature ................................................. + 125 ºC DC Voltage ......................................................... + 18 Volts Continuous RF Input Power ................................. + 20 dBm Short Term RF Input Power .... 500 Milliwatts (1 Minute Max.) Maximum Peak Power .................... 0.5 Watt (3 µsec Max.) Note: Care should always be taken to effectively ground the case of each unit. Typical Performance Data Gain (dB) Noise Figure (dB) Reverse Isolation (dB) 11 - 5 6.5 6 10 - 10 5.5 9 - 15 5 8 - 20 12 0 Start 10 MHz Stop 100 MHz Start 10 MHz 1 dB Comp. (dBm) Stop 100 MHz 4.5 Start 10 MHz Input VSWR 31 Stop 100 MHz Output VSWR 2.0 2.0 1.5 1.5 30.8 30.6 30.4 1.0 30.2 Start 10 MHz Legend Stop 100 MHz + 25 ºC 1.0 Start 10 MHz Stop 100 MHz Start 10 MHz Stop 100 MHz + 85 ºC - - - - - - -55 ºC 3/25/04 Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, Florida 32905 · PH (888) 553-7531 · Fax (888) 553-7532 www.spectrummicrowave.com Spectrum Microwave (Europe) · 2707 Black Lake Place · Philadelphia, Pa. 19154 · PH (215) 464-4000 · Fax (215) 464-4001 4 DWG NO. 3 SH 088-00386 1 OF 1 REV 1 P1 REVISIONS NOTES: ECN REV. DESCRIPTION CHNG/DATE APPVD/DATE 1. XXXX P1 PRELIMINARY RELEASE 2013/06/24 - HOUSING: 70/30 CN/NI ELECTRONIC GRADE .31 TYP 1.58 .97 SMI B XXXXXX OUT IN 1.00 .07 B XXXX +Vdc MODEL NO. .82 DATE CODE .54 TYP. .11 FIELD REPLACEABLE SMA CONNECTORS DC INPUT .018 PIN TYP. .13 .34 WITHOUT SMA CONNECTORS GROUND .44 MTG SURFACE CAUTION THIS ASSEMBLY CONTAINS PARTS SENSITIVE TO DAMAGE BY ELECTROSTATIC DISCHARGE (ESD). USE ESD PRECAUTIONARY PROCEDURES WHEN TOUCHING, REMOVING OR INSERTING .91 A A SEE SEPARATE PARTS LIST IN ELECTRONIC STORAGE .10 0 4X 2-56 UNC - 2B .13 * INTERPRET DRAWING IAW ASME Y14.100-2004 * DIMENSIONING AND TOLERANCING IAW ASME Y14.5-1994 * PARENTHETICAL INFORMATION FOR REFERENCE ONLY * DIMENSIONS ARE IN INCHES .57 .64 .18 .25 0 * DIMENSIONAL LIMITS APPLY BEFORE PROCESSES * TOLERANCES ARE: ANGLES ±1.0° * SURFACE FINISH SPECTRUM MICROWAVE PROPRIETARY INFORMATION THIS DOCUMENT IS THE SOLE PROPERTY OF SPECTRUM MICROWAVE, INC. THE RELEASE OF DATA CONTAINED IN THIS DOCUMENT AND THE REPRODUCTION OF THIS DOCUMENT, IN WHOLE OR IN PART, WITHOUT THE WRITTEN PERMISSION OF SPECTRUM MICROWAVE, INC ARE PROHIBITED. COMPUTER ASSISTED DRAWING GENERATED USING SOLIDWORKS 2007 FORM NO. 1054 SIZE B1 3rd ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED 4 3 63 2 PLACE DECIMAL ±.02 3 PLACE DECIMAL ±.005 * REMOVE ALL BURRS AND SHARP EDGES .010 RAD MAX. * CONCENTRICITY MACHINED DIA: .002 FIM * MACHINED TOOL MISMATCH: .002 MAX. SPECTRUM MICROWAVE, INC ANSI DRAWN WAR CHECKED ENGRG PH MFG 2707 Black Lake Place Philadelphia, PA 19154-1008 (USA) DATE 2013/06/24 TITLE OUTLINE, H1L 2013/06/24 SIZE CAGE CODE B 60979 QA SCALE: DO NOT SCALE DRAWING 2 DWG NO. REV P1 088-00386 SHEET 2:1 1 1 OF 1