Model # MO4xxN Double Balanced Mixer Octave Band: RF 4.0 to 8.0 GHz Technical Specifications RF (GHz) Parameter SSB Conversion 3.5-8.5 3.5-8.5 3.5-8.5 4.0-8.0 4.0-8.0 4.0-8.0 loss: (2) (3) Isolation LO to RF: LO to IF: RF to IF: 4.0-8.0 Specifications Conditions LO (GHz) IF (GHz) Min DC-0.50 DC-1.5 DC-2.0 5.5 dB 6.0 dB 6.7 dB 3.5-8.5 25 dB 3.5-8.5 15 dB Input 1 dB Compression Point: 4.0-8.0 3.5-8.5 DC-2.0 4.0-8.0 3.5-8.5 DC-2.0 LO Power:(4) 4.0-8.0 3.5-8.5 DC-2.0 Max 7.0 dB 8.5 dB 9.5 dB 33 dB 22 dB 22 dB +1 dBm +4 dBm +8 dBm +12 dBm +11 dBm +14 dBm +18 dBm +22 dBm +7 dBm +10 dBm +14 dBm +19 dBm Input Third Order Intercept Point: Typical MO43 MO44 MO46 MO47 MO43 MO44 MO46 MO47 MO43 MO44 MO46 MO47 Ordering Information M O 4 X LO Power 3 = +7 dBm 4 = +10 dBm 6 = +14 dBm 7 = +19 dBm X N Drop-In Module or With SMA(F) Connectors M = Module P = With Connectors Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system from -55˚C to +100˚C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss for IF frequencies greater than 10 MHz. 3. Conversion loss typically degrades less than 0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. Rev Date: 8/7/2014 © API Technologies Corp. Proprietary Information Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # MO4xxN Typical Performance Rev Date: 8/7/2014 © API Technologies Corp. Proprietary Information Page # 2 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # MO4xxN Outline Drawings All dimensions are in inches and [mm]. Rev Date: 8/7/2014 © API Technologies Corp. Proprietary Information Page # 3 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]