PA1014

Solid State High Power Amplifier
20 – 520 MHz, Wide Instantaneous Bandwidth, Built-in protection
Broadband Series: PA1014
FEATURES
Wideband. Agile. Powerful. Compact.
Class AB linear LDMOS design
20 – 520 MHz
100 Watt output power
50 dB gain
28 Volt operation
Suitable for all modulations standards
Spectrum management.
Fully protected – load VSWR, input overdrive,
over/under supply voltage, overcurrent
APPLICATIONS
Broadband jamming
Electronic warfare
EMI / EMC test equipment
The first task is to get your message through. The second is to
prevent the other guy from getting his message through. The
MtronPTI PA1014 Solid State Power Amp provides a minimum of
100 Watts of CW power across the full bandwidth and less than 3.0
dBP-P gain flatness to meet the needs of broadband spectrum control.
With full power operation from 20.0 MHz to 520 MHz and built in
VSWR protection, the PA1014 has 50 dB of gain, perfect for standalone, array or TWT driver applications.
MtronPTI’s line of Solid State Power Amplifiers is backed by a
multi-national design and manufacturing team with more than 150
years combined PA design experience. MtronPTI’s continuing focus
on client service ensures full program life engineering support from
specification to production to next generation architecture planning.
Like all MtronPTI’s SSPAs, the PA1014 is also available integrated
with power supply, cooling and communications interface as a rack
mountable unit for laboratory or fixed location applications.
EA-6B Prowler – U.S. Navy photo by Photographer’s Mate 3rd Class
Martion S. Fuentes. (RELEASED)
Copyright © 2015 MtronPTI. All rights reserved.
Rev. 20150317 | Page 1 of 3
2525 Shader Road, Orlando FL 32804
Mtronpti.com 407-298-2000
PA1014
Data Sheet
Electrical Characteristics
Parameter
PASSBAND
Operating Frequency Range
Power Output
Small Signal Gain
Power Gain Flatness
Input Return Loss
2-tone Intermodulation (IMD)
Harmonics
Non Harmonic Spurious
Power
Operating Voltage
Current Consumption
Max Input Power
Load VSWR Protection
Turn on / Off Speed
Symbol
Min.
FCARRIER
POUT_MIN
ARF_MIN
20
100
50
RLIN
10
Typ.
Max.
Units
520
-60
MHz
Watts
dB
dBP-P
dB
dBc
dBc
dBc
dBc
30
9
+8
VDC
A
dBm
5
µSec
3.0
-30
-25
-15
VDD
IDD
PIN_MIN
24
Comment
CW
ARF_MAX – ARF_MIN
Within the FSIG bandwidth into 50Ω
40 dBm/tone, ∆ = 1 MHz
2ND, at rated POUT
3RD, at rated POUT
Without damage
∞:1
Environmental & Physical
Parameter
Operating Case Temperature
Storage Temperature
Relative Humidity
Dimensions
Weight
RF Connectors IN / OUT
DC Power / Interface Connector
Cooling
D-Sub Connector Pin Assignments
1
FWD
2
VVA
3
Current Sensor
4
Temperature Sensor
5
Shutdown
6, 7
VDD
8, 9
GND
Symbol
TOC
TSTR
Min.
Typ.
Max.
-30
+75
-40
+85
5
95
Option – 00 162 x 96 x 27
Option – 01 200 x 100 x 27
700
SMA female
9-pin Hybrid D-Sub
External Heat Sink
Units
°C
°C
%
mm
Comment
Non-condensing
Excluding connectors
gr.
Forced air required
Option 101 – Analog Forward Power Indicator
Option 103 – Analog Gain Control
ID @ 20 mV / 100 mA typ.
VT @ 10 mV / °C + 500 mV typ.
TTL
28 VDC
Ground
Case Outline (Standard)
Copyright © 2015 MtronPTI. All rights reserved.
Rev. 20150317 | Page 2 of 3
2525 Shader Road, Orlando FL 32804
Mtronpti.com 407-298-2000
PA1014
Data Sheet
Case Outline (Option 01)
Revision History
Date
20150317
Rev.
A
Orig.
DPD
Details of Revision
Initial
Information provided by MtronPTI is believed to be accurate and reliable. However, no responsibility is assumed by MtronPTI for its use nor for any
infringements or patents or other rights of third parties that may result from its use.
No license is granted by implication or otherwise under any patent or patent rights of MtronPTI.
MtronPTI may change specifications without notice to improve end application performance or product manufacturability.
Contact MtronPTI for the most up-to-date information.
Copyright © 2015 MtronPTI. All rights reserved.
Rev. 20150317 | Page 3 of 3
2525 Shader Road, Orlando FL 32804
Mtronpti.com 407-298-2000